Warranty Check Ecc 6

Integration Test Plan Test Scenario : Create and configure master warranty ,warranty counter, assign and execute warranty check. No

BUSINESS PROCESS STEPS

1

Preliminary configuration settings for Creating warranty Category

2

Preliminary configuration setting settings for Creating warranty type.

3

Preliminary configuration setting settings for Defining number range for Master warranty.

Module - Plant Maintenance Maintenance Cycle

TRANS. CODE

SPRO>PM&CS> Master data in plant maintenance and customer service>Basic settings> warranties> Check warranty category SPRO>PM&CS> Master data in plant maintenance and customer service>Basic settings> warranties> Define warranty type SPRO>PM&CS> Master data in plant maintenance and customer service>Basic settings> warranties> Define number range for Master

INPUT DATA

Patch/ Reference

OUTPUT DATA / RESULT

SAP Doc Reference/

OK / Error (support by Screen Shots)

Warranty Category: I & O Class active check box for both categories is selected.

DATA accepted. Warranty type 2 created.

OK

Warranty type:2 Warranty category: Warrantee(Vendor/Manufacturer) Text:Vendor /manufacturer warranty. All dialog boxes for notifcation, order , billing request is selected.

DATA accepted. Warranty type 2 created.

OK

Select intervals,

Data accepted.

OK

Define internal number range for Master warranty.

Comments : Tested By K.Kiran Kumar

Test Date 17/04/2007

Approved By

Approved Date

Integration Test Plan

Module - Plant Maintenance Maintenance Cycle

Test Scenario : Create and configure master warranty ,warranty counter, assign and execute warranty check. No

BUSINESS PROCESS STEPS

TRANS. CODE

INPUT DATA

Patch/ Reference

OUTPUT DATA / RESULT

SAP Doc Reference/

OK / Error (support by Screen Shots)

warranty.

4

Create characteristics

CT04

5

Define warranty Counter

GM04

6

Create Master warranty

BGM1

Name: OP-HR. Description: operating hours; Data type: Numeric format. Number of characters: 3 Decimal Places: 1 Value assignment: Single Value Unit of measure: hrs. Warranty counter: OP-HR Default value: Not selected. Time dependent: Not selected. Description: ACFLMC Warranty Warranty type: Vendor/Manufacture warranty. Under services tab enter text: PLC Under counter tab: Select warranty counter OP-HR. Max. Warranty counter value: 10 hr Counter link: OR

4 Create measuring point:

IE02

Equipment: ACFLMC-001 Measuring position: operating Hours Decimal places:1

Data Accepted. Characteristics OP-HR created.

OK

DATA accepted. Warrenty counter OP-HR created. DATA accepted. Master warranty 2000000010 is created

OK

DATA accepted. Measuring point 21 is created for the equipment

OK

OK

Comments : Tested By K.Kiran Kumar

Test Date 17/04/2007

Approved By

Approved Date

Integration Test Plan

Module - Plant Maintenance Maintenance Cycle

Test Scenario : Create and configure master warranty ,warranty counter, assign and execute warranty check. No

5

BUSINESS PROCESS STEPS

Create Measuring document

TRANS. CODE

IE02

7

IW21

8

Create notification

Create maintenance order

OUTPUT DATA / RESULT

Description: operating hours Characteristics: OP-HR Measuring point is counter selected. Counter over reading: 9999 Annual estimate: 3650 Measuring point no:21 Reading of the counter:0

IK11

6 Assign Master warranty to equipment ACFLMC-001

INPUT DATA

Patch/ Reference

OK / Error (support by Screen Shots)

ACFLMC-001

Equipment: ACFLMC-001 Go to additional data 1 tab: Vendor warranty field: Begin warranty:01.01.2007 Master warranty: 2000000010 Select inherit warranty, Pass on warranty.

DATA accepted. Measuring document 41 is created. DATA accepted. Warranty check status OK is displayed.

OK

DATA accepted. Warranty check box displayed.

OK

Notification type: M1 Equipment: ACFLMC-001 Function location: OP-PROD-P10FLA. Order type: PM01 DATA accepted. Equipment: ACFLMC-001 Warranty check

IW31

SAP Doc Reference/

OK

OK

Comments : Tested By K.Kiran Kumar

Test Date 17/04/2007

Approved By

Approved Date

Integration Test Plan

Module - Plant Maintenance Maintenance Cycle

Test Scenario : Create and configure master warranty ,warranty counter, assign and execute warranty check. No

9

BUSINESS PROCESS STEPS

Create Measuring document

TRANS. CODE

Planning Plant: 1000 Business Area: 1000 Measuring point no: 21 Reading of the counter: 11

IK11

10

Create notification

IW21

11

Create maintenance order

IW31

INPUT DATA

Patch/ Reference

OUTPUT DATA / RESULT

SAP Doc Reference/

OK / Error (support by Screen Shots)

box displayed.

DATA accepted. Measuring document 42 is created. Notification type: M1 DATA accepted. Equipment: ACFLMC-001 Warranty check Function location: OP-PROD-P10- box is not FLA. displayed. Order type: PM01 DATA accepted. Equipment: ACFLMC-001 Warranty check Planning Plant: 1000 box is not Business Area: 1000 displayed.

OK

OK

OK

12 13 14 15 16

Comments : Tested By K.Kiran Kumar

Test Date 17/04/2007

Approved By

Approved Date