Untitled 1

DM2301 GRAPHIC COMMUNICATION 2

PARTS &ASSEMBLY MODELLING W/ PRO/E

0719547 MARIO R SIQUEIRA

PARTS MODELLING AND ASSEMBLY OF A EXTERNAL SPEAKER SYSTEM FOR MULTIMEDIA DEVICES

SUBMITED ON 25TH OF NOVEMBER 2008

INTRODUCTION The object chosen for modelling, assembly and rendering in this assignment is a version of the Logitech Playgear Amp. The number of unique parts have been reduced to a minimum to comply with the maximum number of parts (between 6 to 10 parts). The unique parts in this assembly are: 1x stand.prt 2x battery_cover.prt 2x body_back.prt LOGITECH PLAYGEAR AMP, picture from ign.com 2x body_front.prt 1x electronics.prt 2x speaker_cover_holder.prt 2x speaker_cover_back.prt 2x speaker_cover_front.prt 4x speaker.prt 4x speaker_ring.prt

 GLAMOUR SHOT, rendered in Bunkspeed Hypershot Pro

 GLAMOUR SHOTS These are glamour renderings of the final assembly in different positions and configurations. Renderer used: Bunkspeed Hypershot Pro v1.5

 SNAP-FIT, speaker_cover_back.prt attached to speaker_cover_front.prt using snap-fit features  ELECTRONICS AND INNER EXTRUSIONS, body_back.prt and body_front.prt attach together using 3mm screws. The electronic parts and components are represented as a single undescriminated red part.

09

10

08

07

09

08

06

04 05 03

07

 RENDERED EXPLODED VIEW

04

01. battery_cover 02. stand 03. body_cover_back 04. speaker_holder 05. electronics 06. body_cover_front 07. speaker_cover_back 08. speaker 09. speaker_ring 10. body_cover_front 01

02