Tts7_f34170033_dinda Fadia Dwitami_kamis Siang.docx

Regenerating model. AutoCAD menu utilities loaded. AutoCAD menu utilities loaded.*Cancel* Command: Command: Command: Command: Command: Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Window Lasso Press Spacebar to cycle options Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: Command: *Cancel* Command: Command: _.erase 1 found Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: Regenerating model. Regenerating model. Regenerating model. Regenerating model. Regenerating model. Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: *Cancel* Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter]: 76 Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: Command: _.erase 1 found Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <76.0000>: 76 Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command:

Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <76.0000>: *Cancel* Command: Command: Command: Command: _properties _acadpane _opm _show Command: _.erase 1 found Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <76.0000>: 38 Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <38.0000>: 25 Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: >>Enter new value for ORTHOMODE <0>: Resuming RECTANG command. Specify other corner point or [Area/Dimensions/Rotation]: @100,16 Command: Command: Command: _move Select objects: 1 found Select objects: 1 found (1 duplicate), 1 total Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: @0,-8 Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: @138,57 Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <25.0000>: *Cancel* Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <25.0000>: 11

Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: *Cancel* Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: @50,32 Command: _u MOVE GROUP Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: @-50,32 Command: _u MOVE GROUP Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: @39,21 Command: _u MOVE GROUP Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: @-39,21 Command: *Cancel* Specify second point or <use first point as displacement>: @-39,21 Command: *Cancel* Command: FILLET Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: radius Specify fillet radius <0.0000>: 55 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Select second object or shift-select to apply corner or [Radius]: Command: FILLET Current settings: Mode = TRIM, Radius = 55.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: radius Specify fillet radius <55.0000>: 25 Select first object or [Undo/Polyline/Radius/Trim/Multiple]:

Select second object or shift-select to apply corner or [Radius]: Command: FILLET Current settings: Mode = TRIM, Radius = 25.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Command: Command: _.erase 1 found Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: 1 found Select objects: Specify opposite corner: *Cancel* 0 found Select objects: 1 found, 2 total Select objects: *Cancel* Command: trim Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite corner: No objects crossed by crossing window. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite corner: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite corner: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : >>Enter new value for ORTHOMODE <0>: Resuming MOVE command. Specify base point or [Displacement] : @0,2 Specify second point or <use first point as displacement>: _u Invalid point. Specify second point or <use first point as displacement>: @0,2 Command: _u INTELLIZOOM INTELLIZOOM Command: _u MOVE GROUP Command: _u TRIM Command: Command: Command: _mredo Enter number of actions or [All/Last]: 1 TRIM Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: @138,63 Command: *Cancel* Command: F FILLET Current settings: Mode = TRIM, Radius = 25.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r Specify fillet radius <25.0000>: 25 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Select second object or shift-select to apply corner or [Radius]: Command: _u FILLET Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <11.0000>: 11

Command: Command: MOVE 1 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>: @36,-36 Command: _u MOVE Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: -16 Point or option keyword required. Specify other corner point or [Area/Dimensions/Rotation]: Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: >>Enter new value for ORTHOMODE <0>: Resuming RECTANG command. Specify other corner point or [Area/Dimensions/Rotation]: @138,-16 Command: Command: Command: Command: Command: _move 1 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>: Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: @-25,25 Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: _u LINE GROUP Command: *Cancel* Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: >>Enter new value for ORTHOMODE <0>: Resuming RECTANG command. Specify other corner point or [Area/Dimensions/Rotation]: Command: _u RECTANG GROUP Command: RULER DIST Specify first point: Specify second point or [Multiple points]: Distance = 102.9556, Angle in XY Plane = 270, Angle from XY Plane = 0

Delta X = 0.0000, Delta Y = -102.9556, Delta Z = 0.0000 Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: >>Enter new value for ORTHOMODE <0>: Resuming RECTANG command. Specify other corner point or [Area/Dimensions/Rotation]: @-16,103 Command: _u RECTANG GROUP Command: Command: Command: _rectang Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Specify other corner point or [Area/Dimensions/Rotation]: >>Enter new value for ORTHOMODE <0>: Resuming RECTANG command. Specify other corner point or [Area/Dimensions/Rotation]: @-16,103 Command: FILLET Current settings: Mode = TRIM, Radius = 25.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r Specify fillet radius <25.0000>: 25 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Select second object or shift-select to apply corner or [Radius]: Command: FILLET Current settings: Mode = TRIM, Radius = 25.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: *Cancel* Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Command: Command: Command: _line

Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite corner: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: trim *Invalid selection* Expects a point or Fence/Crossing/Project/Edge/eRase Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: trim *Invalid selection* Expects a point or Fence/Crossing/Project/Edge/eRase Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: Command: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: Command: _.erase 1 found Command: _u INTELLIZOOM Command: _u ERASE Command: Command:

Command: Command: _move 1 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>: Command: _u MOVE GROUP Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: 22 Command: M MOVE Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: 50 Command: *Cancel* Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: Command: _line Specify first point: Specify next point or [Undo]:

Specify next point or [Undo]: *Cancel* Command: _u LINE GROUP Command: _u INTELLIZOOM Command: _u ERASE Command: _u ERASE Command: _u ERASE Command: _u ERASE Command: _u ERASE Command: _u ERASE Command: _u INTELLIZOOM Command: _u MOVE Command: _u MOVE GROUP Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: >>Enter new value for ORTHOMODE <0>: Resuming MOVE command. Specify second point or <use first point as displacement>: @50,25 Command: _u INTELLIZOOM Command: _u MOVE GROUP Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: >>Enter new value for ORTHOMODE <0>: Resuming MOVE command. Specify second point or <use first point as displacement>: @-50,-25 Command: *Cancel* Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: Command: LINE Specify first point: trim Invalid point. Specify first point: Specify next point or [Undo]: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>:

Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: Command: Command: _line Specify first point: *Cancel* Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or

[Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _u ERASE Command: _u ERASE Command: _u ERASE Command: _u ERASE Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command:

Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: >>Enter new value for ORTHOMODE <0>: Resuming LINE command. Specify next point or [Undo]: @10,0 Specify next point or [Close/Undo]: _u Specify next point or [Undo]: _u Specify next point or [Undo]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command: Command: Command: _move Select objects: 1 found Select objects: 1 found, 2 total Select objects: 1 found, 3 total Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:_u Command has been completely undone. ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:*Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: Command: _move Select objects: 1 found Select objects: 1 found, 2 total Select objects: 1 found, 3 total Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: Command: MOVE Select objects: 1 found

Select objects: *Cancel* Command: Command: _.erase 1 found Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : >>Enter new value for ORTHOMODE <0>: Resuming MOVE command. Specify base point or [Displacement] : @10,0 Specify second point or <use first point as displacement>: _u Invalid point. Specify second point or <use first point as displacement>: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : 10 Specify second point or <use first point as displacement>: _u Invalid point. Specify second point or <use first point as displacement>: Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : >>Enter new value for ORTHOMODE <0>: Resuming MOVE command. Specify base point or [Displacement] : @0,10 Specify second point or <use first point as displacement>: _u Invalid point. Specify second point or <use first point as displacement>: *Cancel* Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : @0,-10 Specify second point or <use first point as displacement>: Command: _u

Command: _u MOVE GROUP Command: Command: Command: _move Select objects: 1 found Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: 10 Command: Command: Command: _move Select objects: 1 found Select objects: 1 found, 2 total Select objects: 1 found, 3 total Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: 10 Command: Command: Command: _move Select objects: 1 found Select objects: 1 found, 2 total Select objects: 1 found, 3 total Select objects: 1 found, 4 total Select objects: 1 found, 5 total Select objects: Specify base point or [Displacement] : *Cancel* Command: join*Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: ** MOVE ** Specify move point or [Base point/Copy/Undo/eXit]: *Cancel* Command: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command:

Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Command: Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite corner: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: _u ERASE Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command: Command: Command: _line Specify first point:

Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: Specify next point or [Close/Undo]: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: ** MOVE ** Specify move point or [Base point/Copy/Undo/eXit]: *Cancel* Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: ** MOVE ** Specify move point or [Base point/Copy/Undo/eXit]: *Cancel* Command: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite corner: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: Command: _.erase 1 found Command: *Cancel* Command: *Cancel* Command: _QUIT Command: Command: _.erase 1 found Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:10 Command: *Cancel* Command: _u Grip Edit Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:25 Command: _u Grip Edit Command: Command: _.erase 1 found Command: Command: Command: M MOVE 1 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>: Command: Command: *Cancel* Command: Command: M MOVE 1 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>:

Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Command: Command: _.erase 1 found Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: _u Specify next point or [Undo]: *Cancel* Command: Command: Command: _move Select objects: 1 found Select objects: 1 found, 2 total Select objects: 1 found, 3 total Select objects: 1 found, 4 total Select objects: 1 found, 5 total Select objects: 1 found, 6 total Select objects: 1 found, 7 total Select objects: 1 found, 8 total Select objects: 1 found, 9 total Select objects: 1 found, 10 total Select objects: 1 found, 11 total

Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: 10 Command: _u MOVE GROUP Command: *Cancel* Command: Command: Command: _move Select objects: 1 found Select objects: 1 found, 2 total Select objects: 1 found, 3 total Select objects: 1 found, 4 total Select objects: 1 found, 5 total Select objects: 1 found, 6 total Select objects: 1 found, 7 total Select objects: 1 found, 8 total Select objects: 1 found, 9 total Select objects: 1 found, 10 total Select objects: 1 found, 11 total Select objects: Specify base point or [Displacement] : Specify second point or <use first point as displacement>: 10 Command: _u MOVE GROUP Command: RULER DIST Specify first point: Specify second point or [Multiple points]: *Cancel* Command: *Cancel* Window Lasso Press Spacebar to cycle options Window Lasso Press Spacebar to cycle options Command: M MOVE 14 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>: Crossing Lasso Press Spacebar to cycle options Command: *Cancel* Crossing Lasso Press Spacebar to cycle options Command: move 9 found Specify base point or [Displacement] : Specify displacement <0.0000, 0.0000, 0.0000>: _u Invalid point. Specify displacement <0.0000, 0.0000, 0.0000>: *Cancel* Crossing Lasso Press Spacebar to cycle options Command: MOVE 9 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>: 10 Command: _u MOVE Crossing Lasso Press Spacebar to cycle options Command: MOVE 12 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>: Crossing Lasso Press Spacebar to cycle options Command: MOVE 10 found Specify base point or [Displacement] : *Cancel* Crossing Lasso Press Spacebar to cycle options Command: *Cancel*

Crossing Lasso Press Spacebar to cycle options Command: MOVE 12 found Specify base point or [Displacement] : Specify second point or <use first point as displacement>: 10 Command: Command: _.erase 1 found Command: EXPLODE Select objects: None found. Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: Command: EXPLODE 1 found Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: *Cancel* Command: L LINE Specify first point: Specify next point or [Undo]: *Cancel* Command: *Cancel* Command: Command: _.erase 1 found Command: L LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: 10 Zero length line created at (4835.0601, 4858.7793, 0.0000) Specify next point or [Close/Undo]: 10 Specify next point or [Close/Undo]: 36 Specify next point or [Close/Undo]: Specify next point or [Close/Undo]: *Cancel* Command: L LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: 10 Specify next point or [Close/Undo]: 25 Specify next point or [Close/Undo]: Specify next point or [Close/Undo]: *Cancel* Command: L LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: 10 Zero length line created at (4835.0601, 4836.7793, 0.0000) Specify next point or [Close/Undo]: *Cancel* Command: Command: _.erase 1 found Command: L

LINE Specify first point: *Cancel* Command: L LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: 10 Specify next point or [Close/Undo]: 14 Specify next point or [Close/Undo]: Specify next point or [Close/Undo]: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite corner: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: *Cancel* Command: *Cancel* ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: *Cancel* Command: L LINE Specify first point: Specify next point or [Undo]: *Cancel* Command: *Cancel* Command: Command: _.erase 1 found Command: L LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: 10 Zero length line created at (4835.0601, 4858.7793, 0.0000) Specify next point or [Close/Undo]: 10 Specify next point or [Close/Undo]: 36 Specify next point or [Close/Undo]: Specify next point or [Close/Undo]: *Cancel* Command: L LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: 10 Specify next point or [Close/Undo]: 25 Specify next point or [Close/Undo]:

Specify next point or [Close/Undo]: *Cancel* Command: L LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: 10 Zero length line created at (4835.0601, 4836.7793, 0.0000) Specify next point or [Close/Undo]: *Cancel* Command: Command: _.erase 1 found Command: L LINE Specify first point: *Cancel* Command: L LINE Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: 10 Specify next point or [Close/Undo]: 14 Specify next point or [Close/Undo]: Specify next point or [Close/Undo]: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify opposite corner: *Cancel* Command: TRIM

Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: *Cancel* Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: .ERASE 1 found Command: *Cancel* Command: _u ERASE Command: Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command:

Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: U Grip Edit Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:*Cancel* Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:

Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:*Cancel* Command: *Cancel* Command: Command: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Command: Command: *Cancel* Command: Command: Command: Command: Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:2 Command: *Cancel*

*Cancel* *Cancel* *Cancel* *Cancel* *Cancel*

*Cancel*

*Cancel*

*Cancel*

*Cancel* *Cancel* *Cancel* *Cancel*

Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: *Cancel* Command: Command: Command: Command: Command: Command: Command: Command: Command: Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: *Cancel* Command: *Cancel* Command: *Cancel* Command: _QUIT Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Command: _pasteclip Specify insertion point: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Command: _pasteclip Specify insertion point: Command: Command: _.erase 1 found Command: Command: Command: _pasteclip Specify insertion point: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command:

** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: *Cancel* Command: Command: Command: _pasteclip Specify insertion point: Command: Command: *Cancel* Command: _u PASTECLIP GROUP Command: Command: Command: _pasteclip Specify insertion point: Command: Command: Command: _.erase 1 found Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <11.0000>: Command: Command: EXPLODE 1 found 1 was not able to be exploded. Select objects: 1 found, 0 total 1 was not able to be exploded. Select objects: 1 found, 0 total 1 was not able to be exploded. Select objects: 1 found, 0 total 1 was not able to be exploded. Select objects: 1 found, 0 total 1 was not able to be exploded. Select objects: *Cancel* None found. Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: 1 found Select objects: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: 1 found Select objects: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*

Command: Command: _.erase 1 found Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel* Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Command: *Cancel* Command: *Cancel* Command: *Cancel* Command: _QUIT Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Command: _pasteclip Specify insertion point: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Command: _pasteclip Specify insertion point: Command: Command: _.erase 1 found Command: Command: Command: _pasteclip Specify insertion point: *Cancel* Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]: Command: *Cancel* Command: Command: Command: _pasteclip Specify insertion point: Command: Command: *Cancel* Command: _u PASTECLIP GROUP

Command: Command: Command: _pasteclip Specify insertion point: Command: Command: Command: _.erase 1 found Command: Command: Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Specify radius of circle or [Diameter] <11.0000>: Command: Command: EXPLODE 1 found 1 was not able to be exploded. Select objects: 1 found, 0 total 1 was not able to be exploded. Select objects: 1 found, 0 total 1 was not able to be exploded. Select objects: 1 found, 0 total 1 was not able to be exploded. Select objects: 1 found, 0 total 1 was not able to be exploded. Select objects: *Cancel* None found. Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: 1 found Select objects: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: 1 found Select objects: *Cancel* Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Does not intersect with the cutting edge. Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: Command: _.erase 1 found Command: Command: Command: _line Specify first point: Specify next point or [Undo]: Specify next point or [Undo]: *Cancel*

Automatic save to /Users/dindafadia/Documents/Autodesk/Autosave/Drawing1_1_385890449_48a2a2f7.s v$ ... Command: Command: *Cancel* Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: *Cancel* Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: 3 Specify next point or [Undo]: 3 Specify next point or [Close/Undo]: Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:3 Command: LINE Specify first point: _u Invalid point. Specify first point: _u Invalid point. Specify first point: _u Invalid point. Specify first point: Specify next point or [Undo]: *Cancel* Command: *Cancel* Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: Command: _line Specify first point: Specify next point or [Undo]: 3 Specify next point or [Undo]: 3 Specify next point or [Close/Undo]: 3 Specify next point or [Close/Undo]: *Cancel* Command: Command: Command: _line Specify first point: Specify next point or [Undo]: 3 Specify next point or [Undo]: Specify next point or [Close/Undo]: 3 Specify next point or [Close/Undo]: *Cancel* Command: Command: Command: Command: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*

Command: *Cancel* Command: Command: _.erase 1 found Command: Command: _.erase 1 found Command: Command: ** STRETCH ** Specify stretch point or [Base point/Copy/Undo/eXit]:*Cancel* Command: *Cancel* Command: Command: Command: _qsave Command: TRIM Current settings: Projection=UCS, Edge=None Select cutting edges ... Select objects or <select all>: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: Select object to trim or shift-select to extend or [Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel* Command: Command: Command: _qsave Command: *Cancel*