Tasks 1&2 Config Bios

  • Uploaded by: philip derit
  • 0
  • 0
  • June 2020
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Tasks 1&2 Config Bios as PDF for free.

More details

  • Words: 358
  • Pages: 3
BIOS/CMOS SETUP

Task 1: Configure BIOS Setup Steps: 1.Turn on the computer. 2. Press Del or F2 key to enter BIOS Setup. 3. At BIOS Setup window, select Standard CMOS Features. 4. At Standard CMOS Features, you can configure Date, Time, Hard disk, CD-ROM Drive and Floppy Disk Drive Parameters. Primary IDE Master: Primary IDE Slave: Secondary IDE Master: Secondary IDE Slave: Drive A: Drive B: Video: Halt On:

1.44MB, 3.5 inch None EGA/VGA All Errors

5.Press Esc to quit Standard CMOS Setup 6. Select Advanced BIOS Features for Boot Sequence configuration First Boot Device Second Boot Device Third Boot Device

: CDROM : Hard Disk : Floppy

Note: To change the boot sequence, select the device (ex: CDROM), press enter and select the desired device for the intended boot sequence.

7.

After applying any changes to CMOS setup, press F10 to save changes to CMOS and EXIT SETUP Save to CMOS and EXIT (Y/N)? Y (press enter) Note: Esc: Quit ↑↓→←: Select ItemPgUp/PgDn/+/-: Modify F1: Help Shift F2: Change Color

Task 2: Set / Change / Disable System Password To set password: 1.Turn on the computer. 2. Press Del or F2 key to enter BIOS Setup 3. Select user Supervisor or User Password menu. 4.To set password. Enter Password Confirm Password

: ex: TESDA (press enter) : TESDA (press enter)

5.Press F10 to Save and Exit Setup.

To change password:

1. 2. 3.

Turn on the computer and press Del or F2 key to enter BIOS Setup. Enter Password: ex: TESDA Select Supervisor or User Password menu Enter Password Confirm Password

: ex: RTC (press enter) : RTC (press enter)

4.Press F10 to Save and Exit Setup. To disable password 3 Ways: 1.

Disable password at BIOS Setup.

 



Turn on the computer and press Del or F2 key to enter BIOS Setup Enter Password: ex: RTC (press enter) Select Supervisor or User Password menu Enter Password: (Do not type any password, just press Enter) PASSWORD DISABLED!!! Press any key to continue



2. 3.

Press F10 to Save and Exit Setup.

Set CMOS jumper to clear the CMOS Settings. Remove and reinsert CMOS battery.

Related Documents

Tasks 1&2 Config Bios
June 2020 9
Config
July 2020 37
Config
June 2020 30
Config
October 2019 52
Bios
April 2020 32

More Documents from ""