Siemens Setup Manuals

Siemens

Setup Manuals

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Setup Siemens C-arm Arcadis Varic Orbic with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ............................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ............................. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Siemens Arcadis Varic via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

Kodak DryView 8300

Requirements: Arcadis Varic syngo platform VB10B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrfCorr16b-bspline, Max Density=3.00 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=4

Author: [email protected], Edition: May ´05

2

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Siemens Arcadis Varic via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

Kodak 190 camera

Requirements: Arcadis Varic syngo platform VB10B Requirements: 190 rel. 1.7.29 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set : XRF Image= xrfCorr16b-bspline, Max Density=3.00 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape= 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) DICOM Network Kodak DryView 8700 Plus

Siemens C-arm Arcadis Varic syngo platform

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: Arcadis Varic syngo platform VB10B Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrfCorr16b-bspline, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers:

Author: [email protected], Edition: May ´05

4

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Printer=8700, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link

Kodak DryView 8100

Requirements: Arcadis Varic syngo platform VB10B Requirements: 9410 v1.6, 8100 v2.4.1 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrfCorr16b-bspline, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No

Author: [email protected], Edition: May ´05

6

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens C-arm Arcadis Varic syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Arcadis Varic syngo platform VB10B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrfCorr16b-bspline, Max Density=3.00 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No

Author: [email protected], Edition: May ´05

8

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, KELI 160 v7.2 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name= k160, Host Sel.= k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set : XRF Image= xrfCorr16b-bspline, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On

Author: [email protected], Edition: May ´05

10

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup:

no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 2180 v2.17H Syngo setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrfCorr16b-bspline, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Author: [email protected], Edition: May ´05

12

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 1120 v2.40/032 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set : XRF Image= xrfCorr16b-bspline, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Author: [email protected], Edition: May ´05

14

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network Kodak DryView 8200 Siemens C-arm Arcadis Varic syngo platform

Crossed Network Cable

Kodak MIM 200

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM 200 v6.1, DV8200 v3.5 Syngo setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name= k8200, Host Sel.= k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device= k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node= k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set : XRF Image= xrfCorr16b-bspline, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On

Author: [email protected], Edition: May ´05

16

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens C-arm Arcadis Varic syngo platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrfCorr16b-bspline, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue

Author: [email protected], Edition: May ´05

18

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)= 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 8100 v2.4.1 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrfCorr16b-bspline, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Author: [email protected], Edition: May ´05

20

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens C-arm Arcadis Varic syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrfCorr16b-bspline, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Author: [email protected], Edition: May ´05

22

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= wrkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

Kodak DryView 8900

Requirements: Arcadis Varic syngo platform VB10B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrfCorr16b-bspline, Max Density=3.00 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On

Author: [email protected], Edition: May ´05

24

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast=2 (Always=Y) n Smoothing Type=0 (Always=Y), Image Polarity=Normal (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=carm

Author: [email protected], Edition: May ´05

25

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens C-arm Arcadis Varic syngo platform

Kodak DryView 8150

Requirements: Arcadis Varic syngo platform VB10B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200), DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrfCorr16b-bspline, Max Density=3.00 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On

Author: [email protected], Edition: May ´05

26

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=carm

Author: [email protected], Edition: May ´05

27

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Arcadis Varic via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens C-arm Arcadis - Varic - Orbic syngo platform Kodak CMI 1000

Requirements: Arcadis syngo platform VB11A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrfCorr16b-bspline, Max Density=3.00 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:

Author: [email protected], Edition: May ´05

28

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Setup Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 10 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 17 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5) ............................................................... 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (4,5) ............ 26 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 29 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 32 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 35 n Kodak DryView 8900 LASER IMAGER......................................................................... 38 n Kodak DryView 8150 LASER IMAGER......................................................................... 41 n Kodak Color Medical Imager 1000 ................................................................................. 44

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Kodak DryView 8300

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8300; Destination alias name AE_TITLE = K8300 HOST_NAME = e.g., DV8300; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 104 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM; Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 8INX10IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 0; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity

Author: [email protected], Edition: May ´05

2

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products - into file C:\bridge\hosts set: the-8300-IPaddress DV8300 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8300] PORT_NUMBER=104 HOST_NAME=IP address of 8300 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=4, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: n Modality Group=2

Author: [email protected], Edition: May ´05

3

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) DICOM Network Kodak DryView 8500 Plus

Siemens C-arm Siremobil Compact DICOM-bridge

Fiber Cable yView 00 Dr 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: Siremobil Compact / ISO-C rel. VA00A, 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera by basically using the correspondent Model into 9410 Local Printers Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8500; Destination alias name AE_TITLE = 9410 HOST_NAME = e.g., PACSL_85; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 1024 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM; Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 11INX14IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density Author: [email protected], Edition: May ´05

4

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-9410-IPaddress PACSL_85 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8500] PORT_NUMBER=1024 HOST_NAME=IP address of 9410 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8500, Model=8500, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8500, Copies=1, Contrast Table=15, TFT/ULUT=Siefl87b.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens C-arm Siremobil Compact DICOM-bridge

Fiber Cable yView 00 Dr 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: Siremobil Compact / ISO-C rel. VA00A, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8700; Destination alias name AE_TITLE = 9410 HOST_NAME = e.g., PACSL_87; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 1024 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density Author: [email protected], Edition: May ´05

6

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-9410-IPaddress PACSL_87 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8700] PORT_NUMBER=1024 HOST_NAME=IP address of 9410 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=15, TFT/ULUT=Siefl87b.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

7

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link Kodak DryView 8100

Requirements: Siremobil Compact / ISO-C rel. VA00A, 9410 v1.6, 8100 v2.4.1 Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8100; Destination alias name AE_TITLE = 9410 HOST_NAME = e.g., PACSL_81; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 1024 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim Author: [email protected], Edition: May ´05

8

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-9410-IPaddress PACSL_81 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8100] PORT_NUMBER=1024 HOST_NAME=IP address of 9410 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=15, TFT/ULUT=Siefl87b.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

9

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens C-arm Siremobil Compact DICOM-bridge

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8300; Destination alias name AE_TITLE = 9410 HOST_NAME = e.g., PACSL_83; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 1024 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 8INX10IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 0; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim

Author: [email protected], Edition: May ´05

10

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-9410-IPaddress PACSL_83 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8300] PORT_NUMBER=1024 HOST_NAME=IP address of 9410 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=4, TFT/ULUT=693c0.w8u n Max.Density=300, Border=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

11

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Kodak 190 camera

Requirements: Siremobil Compact / ISO-C rel. VA00A, 190 rel. 1.7.29 Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = KODAK_190; Destination alias name AE_TITLE = K190 HOST_NAME = e.g., MLP190; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 NORMAL; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity

Author: [email protected], Edition: May ´05

12

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products - into file C:\bridge\hosts set: the-190-IPaddress MLP190 - into file C:\bridge\Mergecom.app set: [KODAK_190] PORT_NUMBER=5040 HOST_NAME=IP address of 190 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

13

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = KODAK_160; Destination alias name AE_TITLE = K160 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 NORMAL; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density

Author: [email protected], Edition: May ´05

14

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [KODAK_160] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

Author: [email protected], Edition: May ´05

15

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=4 i.e., 575 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

16

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = KODAK_2180; Destination alias name AE_TITLE = K2180 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 NORMAL; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density

Author: [email protected], Edition: May ´05

17

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [KODAK_2180] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

Author: [email protected], Edition: May ´05

18

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=4 i.e., 575 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

19

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = KODAK_1120; Destination alias name AE_TITLE = K1120 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 NORMAL; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density

Author: [email protected], Edition: May ´05

20

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [KODAK_1120] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

Author: [email protected], Edition: May ´05

21

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=4 i.e., 575 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

22

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8200; Destination alias name AE_TITLE = K8200 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density

Author: [email protected], Edition: May ´05

23

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8200] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) Author: [email protected], Edition: May ´05

24

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products n n n n n n n n n

TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=Y) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=2 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

25

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) DICOM Network Kodak DryView 8500 Plus

Siemens C-arm Siremobil Compact DICOM-bridge

Fiber Cable yView 00 Dr 3M 87

Fiber Cable

Kodak MIM 200

Requirements: Siremobil Compact / ISO-C rel. VA00A, MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera by basically using the correspondent Model into MIM200 Destination Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8500; Destination alias name AE_TITLE = K8500 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM; Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 11INX14IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type Author: [email protected], Edition: May ´05

26

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8500] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

Author: [email protected], Edition: May ´05

27

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

28

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens C-arm Siremobil Compact DICOM-bridge

Fiber Cable yView 00 Dr 3M 87

Fiber Cable

Kodak MIM 200

Requirements: Siremobil Compact / ISO-C rel. VA00A, MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8700; Destination alias name AE_TITLE = K8700 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type Author: [email protected], Edition: May ´05

29

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8700] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) Author: [email protected], Edition: May ´05

30

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products n n n n n n n

NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=2 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

31

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Siremobil Compact / ISO-C rel. VA00A, MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8100; Destination alias name AE_TITLE = K8100 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim Author: [email protected], Edition: May ´05

32

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8100] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) Author: [email protected], Edition: May ´05

33

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

34

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens C-arm Siremobil Compact DICOM-bridge

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8300; Destination alias name AE_TITLE = K8300 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 8INX10IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 0; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim

Author: [email protected], Edition: May ´05

35

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8300] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List -

reboot the DICOM Bridge computer

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=693c0.w8u (Always=Y), Contrast (dry)=4 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Author: [email protected], Edition: May ´05

36

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

37

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Kodak DryView 8900

Requirements: Siremobil Compact rel. VA00A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on Siremobil Compact only a DICOM camera could be installed Siremobil Compact Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8900 ;Destination alias name AE_TITLE = K8900 HOST_NAME = eg DV8900 ;Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED ;Print Priority 2000,0030 BLUE_FILM ;Medium Type 2000,0040 PROCESSOR ;Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT ;Film Session Label 2010,0040 PORTRAIT ;Film Orientation 2010,0050 14INX17IN ;Film Size 2010,0060 CUBIC ;Magnification Type 2010,0080 2 ;Smoothing Type 2010,0100 BLACK ;Border Density 2010,0110 BLACK ;Empty Image Density 2010,0130 300 ;Max density 2010,0140 NO ;Trim 2020,0020 NORMAL ;Polarity

Author: [email protected], Edition: May ´05

38

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products - into file C:\bridge\hosts set: the-8900-IPaddress DV8900 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8900] PORT_NUMBER=5040 HOST_NAME= IP address of 8900 SERVICE_LIST= Print_Service_List -

reboot the DICOM Bridge computer

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Siefl87b.w87 (Always=Y) n Contrast= 15 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=carm

Author: [email protected], Edition: May ´05

39

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Kodak DryView 8150

Requirements: Siremobil Compact rel. VA00A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on Siremobil Compact only a DICOM camera could be installed Siremobil Compact Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8150 ;Destination alias name AE_TITLE = DV8150 HOST_NAME = eg MIM ;Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED ;Print Priority 2000,0030 BLUE_FILM ;Medium Type 2000,0040 PROCESSOR ;Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT ;Film Session Label 2010,0040 PORTRAIT ;Film Orientation 2010,0050 14INX17IN ;Film Size 2010,0060 CUBIC ;Magnification Type 2010,0080 2 ;Smoothing Type 2010,0100 BLACK ;Border Density 2010,0110 BLACK ;Empty Image Density 2010,0130 300 ;Max density 2010,0140 NO ;Trim 2020,0020 NORMAL ;Polarity

Author: [email protected], Edition: May ´05

40

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products - into file C:\bridge\hosts set: the-8150-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8150] PORT_NUMBER=5040 HOST_NAME= IP address of 81500 SERVICE_LIST= Print_Service_List -

reboot the DICOM Bridge computer

8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name= Siefl87b.w87 (Always=Y) n Contrast=15 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=carm

Author: [email protected], Edition: May ´05

41

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products

Siremobil Compact / ISO-C via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens C-arm Siremobil Compact DICOM-bridge

Kodak CMI 1000

Requirements: Siremobil Compact rel. VA00A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on Siremobil Compact only a DICOM camera could be installed Siremobil Compact Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = CMI_1000 ;Destination alias name AE_TITLE =CMI1000 HOST_NAME = eg CMI1000 ;Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED ;Print Priority 2000,0030 BLUE_FILM ;Medium Type 2000,0040 PROCESSOR ;Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT ;Film Session Label 2010,0040 PORTRAIT ;Film Orientation 2010,0050 8INX10IN ;Film Size 2010,0060 CUBIC ;Magnification Type 2010,0080 2 ;Smoothing Type 2010,0100 BLACK ;Border Density 2010,0110 BLACK ;Empty Image Density 2010,0130 300 ;Max density 2010,0140 NO ;Trim 2020,0020 NORMAL ;Polarity - into file C:\bridge\hosts set: the-CMI1000-IPaddress CMI1000

Author: [email protected], Edition: May ´05

42

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products - into file C:\bridge\Mergecom.app set: [CMI_1000] PORT_NUMBER=5040 HOST_NAME= IP address of CMI1000 SERVICE_LIST= Print_Service_List -

reboot the DICOM Bridge computer

CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality: n Contrast=15 (Always=Y) n TFT Set (From list)=Siefl87b.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

43

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Setup Siemens C-arm Siremobil ISO-C 3D with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ............................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ............................. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siemens Siremobil ISO-C 3D via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

Kodak DryView 8300

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrf (or xrf_16bin), Max Density=3.00 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=4

Author: [email protected], Edition: May ´05

2

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siemens Siremobil ISO-C 3D via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

Kodak 190 camera

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 190 rel. 1.7.29 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set : XRF Image= xrf (or xrf_16bin), Max Density=3.00 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape= 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) DICOM Network Kodak DryView 8700 Plus

Siemens C-arm Siremobil ISO-C 3D syngo platform

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrf (or xrf_16bin), Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers:

Author: [email protected], Edition: May ´05

4

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Printer=8700, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link

Kodak DryView 8100

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 9410 v1.6, 8100 v2.4.1 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrf (or xrf_16bin), Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No

Author: [email protected], Edition: May ´05

6

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens C-arm Siremobil ISO-C 3D syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrf (or xrf_16bin), Max Density=3.00 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No

Author: [email protected], Edition: May ´05

8

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, KELI 160 v7.2 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name= k160, Host Sel.= k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set : XRF Image= xrf (or xrf_16bin), Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On

Author: [email protected], Edition: May ´05

10

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup:

no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 2180 v2.17H Syngo setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrf (or xrf_16bin), Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Author: [email protected], Edition: May ´05

12

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 1120 v2.40/032 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set : XRF Image= xrf (or xrf_16bin), Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Author: [email protected], Edition: May ´05

14

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network Kodak DryView 8200 Siemens C-arm Siremobil ISO-C 3D syngo platform

Crossed Network Cable

Kodak MIM 200

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM 200 v6.1, DV8200 v3.5 Syngo setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name= k8200, Host Sel.= k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device= k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node= k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set : XRF Image= xrf (or xrf_16bin), Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On

Author: [email protected], Edition: May ´05

16

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens C-arm Siremobil ISO-C 3D syngo platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrf (or xrf_16bin), Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue

Author: [email protected], Edition: May ´05

18

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)= 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 8100 v2.4.1 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrf (or xrf_16bin), Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Author: [email protected], Edition: May ´05

20

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens C-arm Siremobil ISO-C 3D syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set: XRF Image= xrf (or xrf_16bin), Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Author: [email protected], Edition: May ´05

22

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= wrkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

Kodak DryView 8900

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrf (or xrf_16bin), Max Density=3.00 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On

Author: [email protected], Edition: May ´05

24

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast=2 (Always=Y) n Smoothing Type=0 (Always=Y), Image Polarity=Normal (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=carm

Author: [email protected], Edition: May ´05

25

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

Kodak DryView 8150

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200), DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrf (or xrf_16bin), Max Density=3.00 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On

Author: [email protected], Edition: May ´05

26

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=carm

Author: [email protected], Edition: May ´05

27

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products

Siremobil ISO-C 3D via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens C-arm Siremobil ISO-C 3D syngo platform

Kodak CMI 1000

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrf (or xrf_16bin), Max Density=3.00 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:

Author: [email protected], Edition: May ´05

28

Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens C-arm Uroskop Access with LASER IMAGER Products

Setup for Siemens C-arm Uroskop Access with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ............................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ............................. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens Uroskope Access ASPIA platform

Kodak DryView 8300

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=4

Author: [email protected], Edition: May ´05

2

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens Uroskope Access ASPIA platform

Kodak 190 camera

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 190 rel. 1.7.29 Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XRF Image=xrf, Max Density=3.00 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) DICOM Network Kodak DryView 8700 Plus

Siemens Uroskope Access ASPIA platform

Fiber Cable yView 00 Dr 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: Author: [email protected], Edition: May ´05

4

Siemens C-arm Uroskop Access with LASER IMAGER Products n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Uroskope Access ASPIA platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link

Kodak DryView 8100

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=1, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0

Author: [email protected], Edition: May ´05

6

Siemens C-arm Uroskop Access with LASER IMAGER Products n n n n

Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Uroskope Access ASPIA platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1

Author: [email protected], Edition: May ´05

8

Siemens C-arm Uroskop Access with LASER IMAGER Products n n n n

Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens Uroskope Access ASPIA platform

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XRF Image=xrf, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Author: [email protected], Edition: May ´05

10

Siemens C-arm Uroskop Access with LASER IMAGER Products n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnification n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens Uroskope Access ASPIA platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Author: [email protected], Edition: May ´05

12

Siemens C-arm Uroskop Access with LASER IMAGER Products n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnification n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens Uroskope Access ASPIA platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XRF Image=xrf, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Author: [email protected], Edition: May ´05

14

Siemens C-arm Uroskop Access with LASER IMAGER Products n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnification n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens Uroskope Access ASPIA platform

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node=k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XRF Image=xrf, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On

Author: [email protected], Edition: May ´05

16

Siemens C-arm Uroskop Access with LASER IMAGER Products n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) DICOM Network

iew 00 DryV 3M 87

Siemens Uroskope Access ASPIA platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700

Author: [email protected], Edition: May ´05

18

Siemens C-arm Uroskop Access with LASER IMAGER Products n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Uroskope Access ASPIA platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Author: [email protected], Edition: May ´05

20

Siemens C-arm Uroskop Access with LASER IMAGER Products n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=Y) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Control 9 pin Siemens Uroskope Access ASPIA platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Kodak DryView 8300

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Author: [email protected], Edition: May ´05

22

Siemens C-arm Uroskop Access with LASER IMAGER Products n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens Uroskope Access ASPIA platform

Kodak DryView 8900

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrf, Max Density=3.00 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On

Author: [email protected], Edition: May ´05

24

Siemens C-arm Uroskop Access with LASER IMAGER Products n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Wrkstn2a.w87 (Always=Y) n Contrast= 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=urosk

Author: [email protected], Edition: May ´05

25

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens Uroskop Access ASPIA platform

Kodak DryView 8150

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200), DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrf, Max Density=3.00 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On

Author: [email protected], Edition: May ´05

26

Siemens C-arm Uroskop Access with LASER IMAGER Products n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=urosk

Author: [email protected], Edition: May ´05

27

Siemens C-arm Uroskop Access with LASER IMAGER Products

Uroskop Access via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens Uroskop Access ASPIA platform

Kodak CMI 1000

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set XRF Image= xrf, Max Density=3.00 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:

Author: [email protected], Edition: May ´05

28

Siemens C-arm Uroskop Access with LASER IMAGER Products n under Image Quality, Grayscale Image Quality: n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Setup for Siemens CT Plus-S, AR, Plus 4 with LASER IMAGERS Important note: from beg. 2001 CT models Balance/Emotion/Esprit switched to the Somaris 5 syngo-based platform (see setup there). Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer.................................................. 3 n Kodak DryView 8700 LASER IMAGER / Plus............................................................... 4 n Kodak DryView 8700 LASER IMAGER / Standard ....................................................... 5 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer.................................................. 6 n Kodak DryView 8500 LASER IMAGER / Plus............................................................... 7 n Kodak DryView 8500 LASER IMAGER / Standard ....................................................... 8 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer.................................................. 9 n Kodak DryView 8300 LASER IMAGER / Standalone.................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) ...... 15 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 17 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 25 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) . 27 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4).................................................................... 29 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4).................................................................... 31 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8900 LASER IMAGER ........................................................................ 33

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 35 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 36 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) ...... 37 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 39 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 41 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 43 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 45 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 47 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (3,4,5) / Kodak DryView 8200 LASER IMAGER......................................................................... 49 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 51 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 53 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 55 n Kodak DryView 8900 LASER IMAGER......................................................................... 57 n Kodak DryView 8150 LASER IMAGER......................................................................... 59 n Kodak Color Medical Imager 1000 ................................................................................. 61

Author: [email protected], Edition: May ´05

2

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens CT

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable e an agr I u tM Ml ti - pn 8800 u 3M

70 3M 8

Vew 0 D ry i

Fiber Cable 8700 Dual

8800 MIM

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8800 rel. 4.2, 8700 rel. 1.15 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=XL, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=13 n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

3

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8700 LASER IMAGER / Plus RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens CT

Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8700 Plus

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: 8700 rel. 1.15 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Plus Setup: n on COMM Menu: Siemens Default n on SIEMENS Menu: n Modality=Somatom, Timeout=10, Smooth Beta=13, Sharp Beta=13 n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

4

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8700 LASER IMAGER / Standard 8700 Standard Siemens 25-pin Control Cable

Siemens CT

RS232 25-to-9 pin Host Adaptor Cable

SPCI iew 00 DryV 3M 87

Siemens 37-pin Data Cable SPDI

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: 8700 rel. 1.15 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Standard Setup: n on TDB/C board: Jumpers=RS232, Switch=Right n on COMM Menu: Siemens Default n on SIEMENS Menu: n Modality=Somatom, Timeout=10, Smooth Beta=13, Sharp Beta=13 n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

5

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens CT

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3M

87 0 0D ry

a ager tM n l i pnu 00Mut -I 3M88

V ie w

Fiber Cable 8500 Dual

8800 MIM

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8800 rel. 5.1, 8500 rel. 1.22 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=13 n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

6

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8500 LASER IMAGER / Plus Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens CT

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

iew 0 DryV 3M 870

8500 Plus

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8500 Plus Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=13 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

7

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8500 LASER IMAGER / Standard Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens CT

Keypad Host

SPCI

UKEIB I mager

SPDI 9-to-9-pin Copper Cable Siemens 37-pin Data Cable

w 0 DryVie 3M 870

8500 Standard

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu:(note: image quality setup proposed by Kodak) n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=13 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

8

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens CT

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable 8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

POEIB 8800 MIM

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8800 rel. 5.1, 8300 rel. 4.4 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=16, LUT=7 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8300 Setup: n on 8300 Operator Menu set: Film Layout: Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control:1200,8,1,Even,3M; Digital Interface:Parity=None n Modality Group=0 (note: image quality setup proposed by Kodak) 8800 Setup: n on COMM Menu: 959 Default; on IMAGE Menu:Density=16, Contrast=7 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=13 n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

9

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8300 LASER IMAGER / Standalone Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens CT

Host

SPCI

8300

RS422 9-pin Copper Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad I mager

UKEIB

Siemens 37-pin Data Cable SPDI

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8300 rel. 4.4 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=16, LUT=7 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8300 Setup: n on 8300 Operator Menu set: n Density=16 n Contrast=7 n Film Layout: Format=1on 1, 2 on 1, 4 on 1, 6 on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None, Modality Group=0

Author: [email protected], Edition: May ´05

10

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak Digital Science 969 HQ LASER IMAGER Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens CT

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M

H Q

L a ser Im ag er

M969 HQ

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, HQ rel. 4.2 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=6 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQ Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=693C0, Dmax=3.00, Contrast=6, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

11

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak Digital Science 969 HQT LASER IMAGER M969 HQT Siemens 25-pin Control Cable

Siemens CT

RS232 25-to-9 pin Host Adaptor Cable

SPCI

3 M

H Q

L a s er Im a g e r

Siemens 37-pin Data Cable SPDI

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0. Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=6, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQT Setup: n on TDB/C board: n Jumpers=RS232, Switch=Right n on COMM Menu: n Siemens Default n on SIEMENS Menu: n Modality=Somatom, Timeout=10 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n TFT=693C0, Contrast=8, Density=6, on OIC Menu: Chemistry=2 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

12

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak Digital Science 959 XL LASER IMAGER Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens CT

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M L a s e r I m a g er

M959 XL

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, XL rel. 3.8 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File XL n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density & LUT depending on chemistry into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=XL, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M959 XL Setup: n on COMM Menu: 959 Default n on EIB Menu: Parity=Disable, Timeout=10

Author: [email protected], Edition: May ´05

13

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT with Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens CT

RS232 25-to-9 pin Host Adaptor Cable

SPCI

Keypad Host

UKEIB Imager

SPDI

9-to-9-pin Copper Cable Siemens 37-pin Data Cable

RS422 9-pole Plug

DryView 8100

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT v1.3, 8100 v1.1 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File XL or HQ or DRYVIEW n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=XL, Timeout=10 n on SHPT Service Screen set Sharp Beta=13, Smooth Beta=13 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=13 n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMS n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable Author: [email protected], Edition: May ´05

14

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) Siemens Host Protocol Translator

Siemens CT

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

SPCI

SPDI

Keypad Host

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

25-9 DPC-UKEIB Cable

DPI4-to-DPC Cable yView 00 Dr 3M 87

Fiber Cable Fiber Cable

Kodak DryView 8700 Plus

Kodak 9410 PACS Link

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT v1.3, 9410 v1.6, 8700 v1.26 Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers. Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom,Camera Type=XL, Timeout=10 n on SHPT Service Screen set Sharp Beta=13, Smooth Beta=13 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

Author: [email protected], Edition: May ´05

3 6

7,1 1

18 5

25 9 15

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=10, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=ct, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=b3c5.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=8, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

16

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER

Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens CT

RS232 25-to-9 pin Host Adaptor Cable

SPDI

RS422 9-pole Plug

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable Control 9-pin

COPCIL Board Copper Cable

Data 37 pin

Kodak DryView 8100

Kodak 9410 PACS Link

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT v1.3, 9410 v1.6, 8100 v2.1.2 Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File XL or HQ or DRYVIEW n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=XL, Timeout=10 n on SHPT Service Screen set Sharp Beta=13, Smooth Beta=13 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Author: [email protected], Edition: May ´05

17

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=10, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=ct, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=B3c5ax4.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=8, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

18

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens CT

RS232 25-to-9 pin Host Adaptor Cable

SPDI

UKEIB Imager Copper Cable

Siemens 37-pin Data Cable

Kodak DryView 8300

Keypad Host

SPCI

DPC

DPC-to-UKEIB Cable

DPI4 Cable Control 9-pin

COPCIL Board Copper Cable Kodak 9410 PACS Link

Data 37 pin

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT v1.3, 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B, 8300 16 MB Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File 3M_HQ n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=7 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on SHPT Service Screen set Sharp Beta=0, Smooth Beta=0 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Note: n power-up the UKEIB separately so that the UKEIB is always on, i.e., not from CT, otherwise when CT is switched-off, also UKEIB is off and host control link is lost. n on Siemens CT select on Exposure->Settings the film size 8x10 and the format 6:1. In this case CT image matrix is 512, due to max. 8300 printable format i.e., 6:1, max 6 images will be printed on each 8300 film. Note that for the Somaris 2 platform a 512 patch must be installed on CT, otherwise the matrix is 1024 and therefore only 4:1 format is possible on 8300 (due to the max printable pixels of 8300). Author: [email protected], Edition: May ´05

19

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=10, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=ct, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8300, Film Destination=Processor, Printer1=8300(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=u1_109b.w8u, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=8x10, C=7, D=14 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

20

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Siemens CT

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 160 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM 200 v6.1, KELI 160 v5.2 Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File Kodak XLP n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=280 (i.e., Dmax), LUT=3 (i.e., Curve Shape=3.0) Contrast=500 (i.e., Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=siemct, n Mod.Name=ct, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On Author: [email protected], Edition: May ´05

21

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n n n n n n n n n n n n n n n

Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=2.80, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

22

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Siemens CT

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File Kodak XLP n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=280 (i.e., Dmax), LUT=3 (i.e., Curve Shape=3.0) Contrast=500 (i.e., Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=siemct, n Mod.Name=ct, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) Author: [email protected], Edition: May ´05

23

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n n n n n n n n n n n n n n n n n

Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=2 Formatting: Pixel Pitch=12.6582 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=2.80, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

24

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER Siemens CT

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File Kodak XLP n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=280 (i.e., Dmax), LUT=3 (i.e., Curve Shape=3.0) Contrast=500 (i.e., Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=siemct, n Mod.Name=ct, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) Author: [email protected], Edition: May ´05

25

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n n n n n n n n n n n n n n n n n

Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 Formatting: Trim Width Enabled=0, Trim Width Disabled=0 Formatting: Pixel Pitch=12.5 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=2.80, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

26

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)

Siemens CT

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

ew 0 DryVi 3M 870

Fiber Cable RS422 37-to-50 pin Digital Adaptor Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for MIM 200 v5.0.1, v5.2, v6.0 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations and if HQ by installing HQ into Siemens Camera Config.File. Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sct, n Mod.Name=sct, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=13, Interpolation Smooth=13 Author: [email protected], Edition: May ´05

27

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n

on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: General: Log.Name=8700 General: Database Name=8700, Model=8700, Memory=32 Media Info: Media=35x43cm, 4096x5223, 5133, Blue Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8700, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=13, Film Contrast=8 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=B3c5ax4.w87, Auto Study=Off, Console=On, Annotation=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

28

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER

Siemens CT

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

RS422 37-to-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for MIM 200 v5.0.1, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sct, n Mod.Name=sct, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=13, Interpolation Smooth=13 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Author: [email protected], Edition: May ´05

29

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

n n n n n n n n

n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8100, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=13, Film Contrast=8 Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On TFT/ULUT=B3c5ax4.w87, Auto Study=Off, Console=On, Annotation=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

30

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER

Siemens CT

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

Control 9-pin COPCIL Board Copper Cable

RS422 37-to-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200

Kodak DryView 8300

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for MIM 200 v5.0.1, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT select on Exposure->Settings the film size 8x10 and the format 6:1 n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=16, LUT=7 into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sct, n Mod.Name=sct, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=0, Interpolation Smooth=0 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue Author: [email protected], Edition: May ´05

31

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n

Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=11.811 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8300, Media Size Select=8x10in at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=0, Film Contrast=7 Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On TFT/ULUT=u1_109b.w8u, Auto Study=Off, Console=On, Annotation=Off

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

32

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens CT

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Kodak DryView 8900

Requirements: CT series from Somatom Plus till Somatom Plus 4 (ie Somaris 2,3,4) Requirements: MIM200 v6.1 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT CT Setup: n on Siemens CT install Camera Config.File Kodak 2180 (or XLP) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=280 (ie Dmax), LUT=3 (ie Curve Shape=3.0) Contrast=500 (ie Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON ie delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.= Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name= sct, n Mod.Name=sct, Primary Control: Type= Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n on Configure, Destination, Add, Print, Network, Qualified, 8900, Set: Author: [email protected], Edition: May ´05

33

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

n n n n n

n General: Log.Name=8900, IPAddr=accordingly n General: Database=8900, Model=8900, Memory=32 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040,AETitle=NER_8900,Counter=40,Response=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.3 n SCU: Luminance Space= On, Variable Border Density=On n SCU: Curve Shape=On, Perception LUT =On, PLUT Service=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination= 8900, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=13, Film Contrast=8 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=B3c5ax4.w87, Auto Study=Off, Console=On, Annotation=Off

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any Author: [email protected], Edition: May ´05

34

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= B3c5ax4.w87 (Always=Y) n Contrast= 8 (Always=Y), Smoothing Type=13 (Always=Y) n Dmin=0.00 (Always=N), Dmax= 3.00 (Always=Y) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ct

Author: [email protected], Edition: May ´05

35

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens CT Somaris 4 platform - AR Star (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit Kodak DryView 8300

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: 8300 DICOM parameters: port=104, AE title=IMN_8300. Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=10, Modality Group=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, Modality Group=4 CT Setup: n on CT into System/Config/Network declare camera IP Addr, AE Title, Port n on CT into System/Config/Camera/Details set: Filmsize=8x10, Orient.=Portrait, Division=e.g., STANDARD 3x2 Add, MaxD=300 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or LUT_022 (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 10 or b) 1, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: Modality Group=a) 0 or b) 4

Author: [email protected], Edition: May ´05

36

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

Kodak 190 camera

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 190 rel. 1.7.29 Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 (use a) configuration in case also a Virtuoso workstation is printing on same camera) b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=2.80, Curve Shape=a) 3.0 or b) 0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

37

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 9410 v1.6, 8700 v1.26 Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers. Note: CT AE Title ends with last 4 digits DBPR (not 0000) e.g., 049SA1CTXYDBPR. Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or CTdry (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 Author: [email protected], Edition: May ´05

38

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=IMN_9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=e.g., 049SA1CTXYDBPR, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 8 or b) 3 n TFT/ULUT=a) b3c5.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 280, Border=0, Mag.Type=8, Smoothing=13 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

39

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens CT Somaris 4 platform - AR Star (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link Kodak DryView 8100

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 9410 v1.6, 8100 v2.1.2 Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: CT AE Title ends with last 4 digits DBPR (not 0000) e.g., 049SA1CTXYDBPR Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or CTdry (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interp.Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=IMN_9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: Author: [email protected], Edition: May ´05

40

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n n n n n n n n

SCU AETitle=e.g., 049SA1CTXYDBPR, SCU IPAddr=accordingly SCP=8100, Copies=1, Contrast Table=a) 8 or b) 1 TFT/ULUT=a) b3c5.w87 or b) Wrkstn2a.w87 Max.Density=a) 300 or b) 280, Border Density=0, Mag.Type=8, Smoothing=13 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=No, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

41

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: CT AE Title ends with last 4 digits DBPR (not 0000) e.g., 049SA1CTXYDBPR. Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=10, Modality group=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, Modality group=4 CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=8x10, Orient.=Portrait, Division=e.g., STANDARD 3x2 Add, Max Density=300 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or LUT_022 (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=IMN_9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: Author: [email protected], Edition: May ´05

42

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n n n n n n n n

SCU AETitle=e.g., 049SA1CTXYDBPR, IPAddr=accordingly SCP=8300, Copies=1, Contrast Table=a) 10 or b) 1, TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u Max.Density=300, Border=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=No, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

43

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, KELI 160 v5.2 Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, Curve Shape=434 (i.e., 3.0), Film Contrast=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On Author: [email protected], Edition: May ´05

44

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n

Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=Curve Shape (Always=Y) Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) Contrast (wet)=0 (Always=Y) Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Interpolation= Cubic, Border=3.99 (Always=N) Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) Negotiate Color Print=Off

160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

45

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) Author: [email protected], Edition: May ´05

46

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

47

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 1120 v2.40/032 Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) Author: [email protected], Edition: May ´05

48

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

49

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for MIM 200 v4.0, v5.0, v5.2, v6.0 Note: This setup is basically also valid for 25 PS computer Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, C=8, TFT=B3C5AX4 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) Author: [email protected], Edition: May ´05

50

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +8 or b) +3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=13 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

51

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for MIM 200 v5.0, v5.2, v6.0 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination. Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5AX4 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

52

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 8 or b) 3 (Always=Y) n ImageDmin=0.00(Always=N),ImageDmax=a)3.00 or b)2.80(Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=13 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

53

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for MIM 200 v5.0, v5.2, v6.0 Note: This setup is basically also valid for 25 PS computer Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5AX4 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Author: [email protected], Edition: May ´05

54

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 8 or b) 3 (Always=Y) n ImageDmin=0.00(Always=N),ImageDmax=a)3.00 or b)2.80(Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=13 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

55

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Control 9 pin Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance/Esprit

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Kodak DryView 8300

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for MIM 200 v5.0, v5.2, v6.0 Note: This setup is basically also valid for 25 PS computer Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=10, Modality group=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, Modality group=4 CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=8x10, Orient.=Portrait, Division=e.g., STANDARD 3x2 Add, Max Density=300 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or LUT_022 (i.e., Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 Author: [email protected], Edition: May ´05

56

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 10 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

57

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit Kodak DryView 8900

Requirements: CT AR VB41A, CT Plus 4 VB40A Requirements: CT Balance/Emotion/Esprit VA10A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT c) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5AX4 d) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=eg STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (ie Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (ie Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (ie smooth) 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On Author: [email protected], Edition: May ´05

58

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 8 or b) 3 (Always=Y), Smoothing Type=13 (Always=N) n Dmin=0.00 (Always=N), Dmax= a)3.00 or b)2.80 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ct

Author: [email protected], Edition: May ´05

59

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Somaris 45 platform - Emotion / Balance / Esprit Kodak DryView 8150

Requirements: CT AR VB41A, CT Plus 4 VB40A Requirements: CT Balance/Emotion/Esprit VA10A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT e) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5AX4 f) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=14x17, Orient.=Portrait, Division=eg STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (ie Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (ie Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (ie smooth) 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On Author: [email protected], Edition: May ´05

60

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name= a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 8 or b) 1 (Always=Y), Smoothing Type=13 (Always=N) n Dmin=0.00 (Always=N), Dmax=a)3.00 or b)2.80 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ct

Author: [email protected], Edition: May ´05

61

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products

Siemens CT via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens CT Somaris 4 platform - ARStar (not ART) - Plus 4 series Kodak CMI 1000

Requirements: CT AR VB41A, CT Plus 4 VB40A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT g) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5AX4 h) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=7, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera: Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set: Filmsize=8x10, Orient.=Portrait, Division=eg STANDARD 3x2 Add, Max Density=a) 300 or b) 280 a) LUT=linear (ie Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (ie Image lutted by CT, linear LUT in Camera) n on CT into Exposure/Settings set Graduation=smt (ie smooth) CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality: n Contrast=a) 8 or b) 7 (Always=Y) Author: [email protected], Edition: May ´05

62

Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products n TFT Set (From list)=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=13 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

63

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Setup for Siemens CT Volume Zoom / Access / Balance / Emotion / Esprit / Sensation / Smile / Spirit with LASER IMAGERS Important note: from beg. 2001 CT models Balance/Emotion/Esprit switched to the Somaris 5 syngo-based platform (see here below). Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) ...... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (3,4,5) / Kodak DryView 8200 LASER IMAGER......................................................................... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile Kodak DryView 8300

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=a) 3.00 or b) 2.80 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 10 or b) 1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=a) 0 or b) 4

Author: [email protected], Edition: May ´05

2

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

Kodak 190 camera

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 (use a) config. in case also a Virtuoso workstation is printing on same camera) b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=2.80 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=2.80, Curve Shape=a) 3.0 or b) 0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

Fiber Cable yView 00 Dr 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and if HQ by installing HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=a) 3.00 or b) 2.80 9410 Setup: Author: [email protected], Edition: May ´05

4

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

n n n n n n n n n n n n n n n

on Device Setup, LOCAL PRINTERS: Printer=8700, Model=8700, Output=Fiber Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz Film Mismatch=Print Always, Interpolation Type=831 Interp Num=2, Max.Density=300, Contrast=6, Border=0 TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: SCU AETitle=accordingly, IPAddr=accordingly SCP=8700, Copies=1, Contrast Table=a) 9 or b) 3 TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 Max.Density=a) 300 or b) 280, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link

Kodak DryView 8100

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=a) 3.00 or b) 2.80 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831

Author: [email protected], Edition: May ´05

6

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 9 or b) 1 n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 280, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=a) 3.00 or b) 2.80 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0

Author: [email protected], Edition: May ´05

8

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 10 or b) 1 n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u n Max.Density=a) 300 or b) 280, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, Curve Shape=434 (i.e., 3.0), Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=2.80 SC Image=a) linear or b) CTLUT, Max Density=2.80 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Author: [email protected], Edition: May ´05

10

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=2.80 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

12

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=2.80 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

14

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, C=8, TFT=B3C5AX4 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node=k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=2.80 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Author: [email protected], Edition: May ´05

16

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +8 or b) +3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into Siemens CT DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=a) 3.00 or b) 2.80

Author: [email protected], Edition: May ´05

18

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 3 (Always=Y) n Dmin=0.00 (Always=N), Dmax=a) 3.00 or b) 2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=a) 3.00 or b) 2.80 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 Author: [email protected], Edition: May ´05

20

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 1 (Always=Y) n Image Dmin=0.00 (Always=N) n Image Dmax=a) 3.00 or b) 2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Control 9 pin Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Kodak DryView 8300

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=a) 3.00 or b) 2.80 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: Author: [email protected], Edition: May ´05

22

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 10 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N) n Image Dmax=a) 300 or b) 280 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Film Output Dest=Bin 9 (Always=N) 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile Kodak DryView 8900

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT c) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K d) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT= WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=a) 3.00 or b) 2.80 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly

Author: [email protected], Edition: May ´05

24

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 9 or b) 3 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax= a) 3.00 or b) 2.80 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ct

Author: [email protected], Edition: May ´05

25

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile Kodak DryView 8150

Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40C/VA47A Requirements: CT Sensation VA50A/VA60A/VA70A/VB19C, Smile VA10A Requirements: CT Sensation/Emotion VB10B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT e) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB f) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT= WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200), DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=a) 3.00 or b) 2.80 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

Author: [email protected], Edition: May ´05

26

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 9 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=a) 3.00 or b) 2.80 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ct

Author: [email protected], Edition: May ´05

27

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products

Siemens CT syngo platform via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens CT Somaris 5 syngo platform - Volume Zoom / Access - Emotion / Balance / Esprit - Sensation - Smile / Spirit

Kodak CMI 1000

Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40C/VA47A Requirements: CT Sensation VA50A/VA60A/VA70A/VB19C, Smile VA10A Requirements: CT Sensation/Emotion/Spirit VB10B/VB20A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT g) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K h) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=7, TFT= WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=a) 3.00 or b) 2.80 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):

Author: [email protected], Edition: May ´05

28

Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality: n Contrast=a) 9 or b) 7 (Always=Y) n TFT Set (From list)=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Setup for Siemens DR FD Thorax / Multix / Vertix / Aristos with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (3,4,5) / Kodak DryView 8200 LASER IMAGER......................................................................... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ............................. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

Kodak DryView 8300

Requirements: FD syngo platform VA20K Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: CR Image=a) linear or b) CR, Max Density=3.00 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 4 or b) 1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=a) 2 or b) 4

Author: [email protected], Edition: May ´05

2

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

Kodak 190 camera

Requirements: FD syngo platform VA20K Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: CR Image=a) linear or b) CR, Max Density=3.00 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=a) 3.0 or b) 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: FD syngo platform VA20K Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: CR Image=a) linear or b) CR, Max Density=3.00

Author: [email protected], Edition: May ´05

4

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 4 or b) 2 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

COPCIL Board Copper Cable

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link

Kodak DryView 8100

Requirements: FD syngo platform VA20K Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: CR Image=a) linear or b) CR, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

Author: [email protected], Edition: May ´05

6

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

n n n n n n n n n

on Device Setup, SCP PRINTERS, Current Providers: Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: SCU AETitle=accordingly, SCU IPAddr=accordingly SCP=8100, Copies=1, Contrast Table=a) 4 or b) 2 TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: FD syngo platform VA20K Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u

Author: [email protected], Edition: May ´05

8

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 4 or b) 1 n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=434 (i.e., 3.0), Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : CR Image=a) linear or b) CR, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30,

Author: [email protected], Edition: May ´05

10

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: CR Image=a) linear or b) CR, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180

Author: [email protected], Edition: May ´05

12

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Modality=OT (Always=N) n Border=3.99 (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: CR Image=a) linear or b) CR, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120

Author: [email protected], Edition: May ´05

14

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node=k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: CR Image=a) linear or b) CR, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, Author: [email protected], Edition: May ´05

16

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +4 or b) +2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00 MIM200 Setup:

Author: [email protected], Edition: May ´05

18

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n n n n

on Configure, Network: Node Name=MIM, IPAddr=accordingly Subnet Mask=accordingly, Gateway Addr=accordingly on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

COPCIL Board Copper Cable

Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

20

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens FD Flat Detector Thorax / Multix RADIS syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:

Author: [email protected], Edition: May ´05

22

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 4 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens Flat Detector FD Image System RADIS syngo platform -Thorax / Multix / Vertix - Axiom Aristos

Kodak DryView 8900

Requirements: FD syngo platform VA20K Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=CR c) into Local Service/Config/DICOM LUT files set CR Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B d) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900

Author: [email protected], Edition: May ´05

24

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 4 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=fd

Author: [email protected], Edition: May ´05

25

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens Flat Detector FD Image System RADIS syngo platform -Thorax / Multix / Vertix - Axiom Aristos

Kodak DryView 8150

Requirements: FD syngo platform VA20K Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=CR e) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B f) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200), DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any

Author: [email protected], Edition: May ´05

26

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 4 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=fd

Author: [email protected], Edition: May ´05

27

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products

Siemens FD via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens Flat Detector FD Image System RADIS syngo platform -Thorax / Multix / Vertix - Axiom Aristos Kodak CMI 1000

Requirements: FD platform Syngo VA20K Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=CR g) into Local Service/Config/DICOM LUT files set CR Image=linear if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B h) into Local Service/Config/DICOM LUT files set CR Image=CR if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000

Author: [email protected], Edition: May ´05

28

Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products n n n n n n

n

n

Modality (SCU) Config (or after modality recognition): Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No Note: Color IQ settings used when images sent with Color DICOM SOP under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: under Image Quality, Grayscale Image Quality: n Contrast=a) 4 or b) 7 (Always=Y) n TFT Set (From list)=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens DSA Axiom Artis with LASER IMAGER Products

Setup for Siemens DSA Axiom Artis with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) ...... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (3,4,5) / Kodak DryView 8200 LASER IMAGER......................................................................... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens Axiom Artis syngo platform

Kodak DryView 8300

Requirements: Axiom Artis syngo platform VA10B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 4 or b) 1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=a) 2 or b) 4

Author: [email protected], Edition: May ´05

2

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens Axiom Artis syngo platform

Kodak 190 camera

Requirements: Axiom Artis syngo platform VA10B Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=a) 3.0 or b) 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens Axiom Artis syngo platform

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: Axiom Artis syngo platform VA10B Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and if HQ by installing HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 9410 Setup: Author: [email protected], Edition: May ´05

4

Siemens DSA Axiom Artis with LASER IMAGER Products

n n n n n n n n n n n n n n n

on Device Setup, LOCAL PRINTERS: Printer=8700, Model=8700, Output=Fiber Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz Film Mismatch=Print Always, Interpolation Type=831 Interp Num=2, Max.Density=300, Contrast=6, Border=0 TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: SCU AETitle=accordingly, IPAddr=accordingly SCP=8700, Copies=1, Contrast Table=a) 4 or b) 2 TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Axiom Artis syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link

Kodak DryView 8100

Requirements: Axiom Artis syngo platform VA10B Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831

Author: [email protected], Edition: May ´05

6

Siemens DSA Axiom Artis with LASER IMAGER Products n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 4 or b) 2 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Axiom Artis syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Axiom Artis syngo platform VA10B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831

Author: [email protected], Edition: May ´05

8

Siemens DSA Axiom Artis with LASER IMAGER Products n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 4 or b) 1 n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens Axiom Artis syngo platform

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=434 (i.e., 3.0), Film Contrast=0 b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

10

Siemens DSA Axiom Artis with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens Axiom Artis syngo platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

12

Siemens DSA Axiom Artis with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens Axiom Artis syngo platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

14

Siemens DSA Axiom Artis with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens Axiom Artis syngo platform

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node=k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Author: [email protected], Edition: May ´05

16

Siemens DSA Axiom Artis with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: General: Log.Name=8200, IPAddr=100.100.100.40, General: Database Name=8200, Model=8200, Memory=32 Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) Supported Item: Collation=On, Common Text=On, Tonescaling=On Supported Item: Remote Image Deletion=On, Rotation=On Interpolation: No Magnification=On, Bilin=On, Repl=On Interpolation: Cubic Spline=On, Cubic Convolution 2=On Format Types: Custom=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 SCU: Density Space=On, Variable Border=On, PLUT Service=On SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) Contrast (dry)=a) +4 or b) +2 (Always=Y) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=0 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens Axiom Artis syngo platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00

Author: [email protected], Edition: May ´05

18

Siemens DSA Axiom Artis with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Axiom Artis syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: Author: [email protected], Edition: May ´05

20

Siemens DSA Axiom Artis with LASER IMAGER Products n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Axiom Artis syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Author: [email protected], Edition: May ´05

22

Siemens DSA Axiom Artis with LASER IMAGER Products n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 4 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens Axiom Artis syngo platform

Kodak DryView 8900

Requirements: Axiom Artis syngo platform VA10B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=xa c) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B d) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM

Author: [email protected], Edition: May ´05

24

Siemens DSA Axiom Artis with LASER IMAGER Products n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 4 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=artis

Author: [email protected], Edition: May ´05

25

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens Axiom Artis syngo platform

Kodak DryView 8150

Requirements: Axiom Artis syngo platform VB11 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=xa e) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B f) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200), DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:

Author: [email protected], Edition: May ´05

26

Siemens DSA Axiom Artis with LASER IMAGER Products n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 4 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=artis

Author: [email protected], Edition: May ´05

27

Siemens DSA Axiom Artis with LASER IMAGER Products

Axiom Artis via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens Axiom Artis syngo platform

Kodak CMI 1000

Requirements: Axiom Artis syngo platform VB11 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=xa g) into Local Service/Config/DICOM LUT files set XA Image=linear if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B h) into Local Service/Config/DICOM LUT files set XA Image=xa if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly

Author: [email protected], Edition: May ´05

28

Siemens DSA Axiom Artis with LASER IMAGER Products n n n n n n n n

n

n

under More Settings: DICOM Port=5040 Edit Host Name/AE Title=CMI1000 Modality (SCU) Config (or after modality recognition): Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No Note: Color IQ settings used when images sent with Color DICOM SOP under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: under Image Quality, Grayscale Image Quality: n Contrast=a) 4 or b) 7 (Always=Y) n TFT Set (From list)=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Setup for Siemens DSA Fluorospot Compact with LASER IMAGERS (note: different models of Iconos, Siregraph, Sireskop could have either the setup of Fluorospot TOP or the setup of Fluorospot Compact) Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer.................................................. 3 n Kodak DryView 8700 LASER IMAGER / Plus............................................................... 4 n Kodak DryView 8700 LASER IMAGER / Standard ....................................................... 5 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer.................................................. 6 n Kodak DryView 8500 LASER IMAGER / Plus............................................................... 7 n Kodak DryView 8500 LASER IMAGER / Standard ....................................................... 8 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer.................................................. 9 n Kodak DryView 8300 LASER IMAGER / Standalone.................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 15 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 17 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4) ............................... 25 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4).................................................................... 27

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 29 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 30 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 31 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 33 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 35 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 37 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 39 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 41 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................43 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ............................. 45 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 47 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 49 n Kodak DryView 8900 LASER IMAGER......................................................................... 51 n Kodak DryView 8150 LASER IMAGER......................................................................... 53 n Kodak Color Medical Imager 1000 ................................................................................. 55

Author: [email protected], Edition: May ´05

2

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer Keypad

Siemens Fluorospot Compact

Video Cable for Footswitch

Keypad Footswitch UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

nput ulti-I 0M 880 3M

00 3M 87

ger Mana

DryView

Fiber Cable 8700 Dual

8800 MIM

Requirements: Fluoro Compact rel. VA01A, 8800 rel. 5.1, 8700 rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8800/8700 Dual Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEFL87B, Dmax=3.00, Contrast=4, Density=14 n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

3

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8700 LASER IMAGER / Plus Keypad

Siemens Fluorospot Compact

Keypad

Video Cable for Footswitch

Footswitch

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8700 Plus

Requirements: Siemens Fluoro Compact rel. VA01A, 8700 Plus rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEFL87B, Dmax=3.00, Contrast=4, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

4

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8700 LASER IMAGER / Standard Siemens Fluorospot Compact

Keypad

Video cable for Footswitch SPDI

Siemens 37-pin Data Cable

iew 00 DryV 3M 87

8700 Standard

Requirements: Fluorospot Compact rel. VA01A, 8700 Standard rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. 8700 Standard Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: n TFT=SIEFL87B, Dmax=3.00, Contrast=4, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

5

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer Keypad

Siemens Fluorospot Compact

Video Cable for Footswitch

Keypad Footswitch UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

nput ulti-I 0M 880 3M

00 3M 87

ger Mana

DryView

Fiber Cable 8500 Dual

8800 MIM

Requirements: Fluoro Compact rel. VA01A, 8800 rel. 5.1, 8500 rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8800/8500 Dual Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEFC969 (or SIEFL87B), Dmax=3.00, Contrast=2, Density=14 n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

6

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8500 LASER IMAGER / Plus Keypad

Siemens Fluorospot Compact

Keypad

Video cable for Footswitch

Footswitch

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8500 Plus

Requirements: Fluorospot Compact rel. VA01A, 8500 Plus rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEFC969 (or SIEFL87B), Dmax=3.00, Contrast=2, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200 n on KEYPAD Menu: n Smooth Beta=2

Author: [email protected], Edition: May ´05

7

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8500 LASER IMAGER / Standard Siemens Fluorospot Compact

Keypad

Video cable for Footswitch SPDI

Siemens 37-pin Data Cable

iew 00 DryV 3M 87

8500 Standard

Requirements: Fluoro Compact rel. VA01A, 8500 Standard rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Standard Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: n TFT=SIEFC969 (or SIEFL87B), Dmax=3.00, Contrast=2, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

8

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer Keypad

Siemens Fluorospot Compact

Keypa d

Video Cable for Footswitch

Footswitch

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable 8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

3M

8 80

0M

pu ti-In ul

t Ma

na

ger

POEIB 8800 MIM

Requirements: Fluoro Compact rel. VA01A, 8800 rel. 5.1, 8300 rel. 4.4 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8300 Setup: n on 8300 Operator Menu set: n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=2 8800 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: Density=15, Contrast=4 n on EIB Menu: Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

9

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8300 LASER IMAGER / Standalone Keypad

Siemens Fluorospot Compact

Video Cable for Footswitch 8300 Siemens 37-pin Data Cable

SPDI

Requirements: Siemens Fluorospot Compact rel. VA01A, 8300 rel. 4.4 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. 8300 Setup: n on 8300 Operator Menu set: n Density=15 n Contrast=4 n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Protocol=Keypad n Digital Interface: Parity=Even n Modality Group=2

Author: [email protected], Edition: May ´05

10

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak Digital Science 969 HQ LASER IMAGER Keypad

Siemens Fluorospot Compact

Keypad Footswitch UKEIB

Video Cable for Footswitch Siemens 37-pin Data Cable

DEIB

SPDI

Fiber Cable Fiber Cable

3 M

H Q

L a ser Im ag er

M969 HQ

Requirements: Fluorospot Compact rel. VA01A, M969 HQ rel. 5.1 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON M969 HQ Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEFC969 (or SIEFL87B), Dmax=3.00, Contrast=4, Density=14 n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

11

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak Digital Science 969 HQT LASER IMAGER Keypad

Siemens Fluorospot Compact

Video Cable for Footswitch M969 HQT Siemens 37-pin Data Cable

SPDI

3 M

H Q

L a ser Im a g er

Requirements: Fluorospot Compact rel. VA01A, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0. Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. M969 HQT Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n TFT=PMS, Contrast=15, Density=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

12

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak Digital Science 959 XL LASER IMAGER XL Keypad

Siemens Fluorospot Compact

Video Cable for Footswitch

Keypad Footswitch KEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M L a s e r I m a g er

M959 XL

Requirements: Fluorospot Compact rel. VA01A, M959 XL rel. 3.8 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on KEIB set Jumper=RS422 n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu: n 959 Default n on EIB Menu: n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200

Author: [email protected], Edition: May ´05

13

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Siemens Fluorospot Compact with Kodak DryView 8100 LASER IMAGER Keypad

Keypad

UKEIB Imager

Copper Cable RS422 9-pole Plug

Siemens Fluorospot Compact

Siemens 37-pin Data Cable

SPDI

DryView 8100

Requirements: Fluoro Compact version 3 rel. VC00C, 8100 v2.4.1 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=2, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=75, Transmission rate=0 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=30, P1,…,P6=0 n on IMAGE QLTY-> Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=SIEFL87B n on LOCAL PANEL Menu: Contrast=4, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Even, Timeout=60

Author: [email protected], Edition: May ´05

14

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual, and HQ) Keypad

Siemens Fluorospot Compact

SPDI

Keypad

UKEIB Siemens 37-pin Data Cable

Copper Cable DPC

DPC-to-UKEIB Cable

DPI4 Cable iew 00 DryV 3M 87

Fiber Cable Fiber Cable

Kodak DryView 8700 Plus

Kodak 9410 PACS Link

Requirements: Fluoro Compact version 3 rel. VC00C, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers. Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

Author: [email protected], Edition: May ´05

15

Siemens DSA Fluorospot Compact with LASER IMAGER Products

n n n n n

on I/O CARD SETUP, DPI4 Digital Menu: Image Data Port: Header, 8 bit, Timeout=30, Parity=Even, Memory=7 Serial Port: Protocol=SuperSet, Parity=None, Baud Rate=19200 on Device Setup, IMS KEYPADS: Kpad=flc, Hosp=sms, Serial Port=DPI4 A KPAD, Image Card=DPI4 A DATA Available Printers=8700, Film Destination=Processor, TFT/ULUT=Siefl87b.w87 into Defaults: Dest=8700, Size=14x17, C=4, D=14, Dmax=3.0, Bit=8

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

16

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER Keypad

Siemens Fluorospot Compact

SPDI

RS422 9-pole Plug

Keypad

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable Control 9-pin

COPCIL Board Copper Cable

Data 37 pin

Kodak DryView 8100

Kodak 9410 PACS Link

Requirements: Fluoro Compact version 3 rel. VC00C, 9410 v1.6, 8100 v2.4.1 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=30, Parity=Even, Memory=7 n Serial Port: Protocol=SuperSet, Parity=None, Baud Rate=19200 on Device Setup, IMS KEYPADS: n Kpad=flc, Hosp=sms, Serial Port=DPI4 A KPAD, Image Card=DPI4 A DATA n Available Printers=8100, Film Destination=Processor, TFT/ULUT=Siefl87b.w87 n into Defaults: Dest=8100, Size=14x17, C=4, D=14, Dmax=3.0, Bit=8

Author: [email protected], Edition: May ´05

17

Siemens DSA Fluorospot Compact with LASER IMAGER Products 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

18

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Siemens Fluorospot Compact

Keypad

Kpad / Host Control Octopus Adaptor Cable Crossed Network Cable

SPDI

Siemens 37-pin Data Cable

Kodak 160 camera

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Fluorospot Compact rel. VB00A Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot Compact DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flc, n Primary Control Type=Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=880, Lines=880, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0

Author: [email protected], Edition: May ´05

19

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=4.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

20

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Siemens Fluorospot Compact

Keypad

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

SPDI

Siemens 37-pin Data Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Fluorospot Compact rel. VB00A Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot Compact DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flc, n Primary Control Type=Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=880, Lines=880, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On Author: [email protected], Edition: May ´05

21

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=4.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

22

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER Siemens Fluorospot Compact

Keypad

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

SPDI

Siemens 37-pin Data Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Fluorospot Compact VB00A Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot Compact DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flc, n Primary Control Type=Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=880, Lines=880, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On Author: [email protected], Edition: May ´05

23

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=4.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

24

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) Keypad Siemens Fluorospot Compact

SPDI

Kpad / Host Control Octopus Adaptor Cable

iew 00 DryV 3M 87

Fiber Cable Siemens 37-pin Data Cable

RS422 37-to-50 pin Digital Adaptor Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Fluoro Compact version 3 rel. VC00C Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations. Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot Compact DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flc, n Primary Control Type=Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=880, Lines=880, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Author: [email protected], Edition: May ´05

25

Siemens DSA Fluorospot Compact with LASER IMAGER Products n n n n n n n n n n n n n n n n n

Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8700, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=4 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

26

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER Keypad Siemens Fluorospot Compact

SPDI

RS422 9-pole Plug

Kpad / Host Control Octopus Adaptor Cable COPCIL Board Copper Cable

Siemens 37-pin Data Cable

Control 9-pin

RS422 37-to-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: Fluoro Compact version 3 rel. VC00C Requirements: MIM200 v6.1, 8100 v2.4.1 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot Compact DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flc, n Primary Control Type=Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=880, Lines=880, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Author: [email protected], Edition: May ´05

27

Siemens DSA Fluorospot Compact with LASER IMAGER Products

n n n n n n n n

n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8100, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=4 Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On TFT/ULUT=Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

28

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

DryView 8300 Siemens Fluorospot Compact

Requirements: Fluorospot Compact rel. VD10A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8300 and in Network Settings set: n AET=IMN_8300, Host name=DV8300, IPAddr=accordingly, Port=104 n Create New and set: Camera=Imation_gen n set: Size=8INx10IN, Format=1x1,1x2,2x2 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=4, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: n Modality Group=2

Author: [email protected], Edition: May ´05

29

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens Fluorospot Compact

Kodak 190 camera

Requirements: Fluorospot Compact rel. VD10A Requirements: 190 rel. 1.7.29 Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K190 and in Network Settings set: n AET=190, Host name=K190, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

30

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network 8700 Plus

Siemens Fluorospot Compact

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

9410 PACS Link

Requirements: Fluorospot Compact rel. VD10A, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8700 and in Network Settings set: n AET=9410, Host name=DV8700, IPAddr=accordingly, Port=1024 n Create New and set: Camera=Imation_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5

Author: [email protected], Edition: May ´05

31

Siemens DSA Fluorospot Compact with LASER IMAGER Products n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=15, TFT/ULUT=Siefl87b.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

32

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Fluorospot Compact

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

9410 PACS Link DryView 8100

Requirements: Fluorospot Compact rel. VD10A, 9410 v1.6, 8100 v2.4.1 Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8100 and in Network Settings set: n AET=9410, Host name=DV8100, IPAddr=accordingly, Port=1024 n Create New and set: Camera=Imation_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=15, TFT/ULUT=Siefl87b.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down Author: [email protected], Edition: May ´05

33

Siemens DSA Fluorospot Compact with LASER IMAGER Products n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

34

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Fluorospot Compact

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Fluorospot Compact rel. VD10A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8300 and in Network Settings set: n AET=9410, Host name=DV8300, IPAddr=accordingly, Port=1024 n Create New and set: Camera=Imation_gen n set: Size=8INx10IN, Format=1x1,1x2,2x2 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=4, TFT/ULUT=693c0.w8u n Max.Density=300, Border=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto

Author: [email protected], Edition: May ´05

35

Siemens DSA Fluorospot Compact with LASER IMAGER Products n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

36

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens Fluorospot Compact

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, KELI 160 v7.2 Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K160 and in Network Settings set: n AET=160, Host name=K160, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Author: [email protected], Edition: May ´05

37

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=4 i.e., 575 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

38

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens Fluorospot Compact

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 2180 rel. 2.17H Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K2180 and in Network Settings set: n AET=2180, Host name=K2180, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Author: [email protected], Edition: May ´05

39

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=4 i.e., 575 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

40

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens Fluorospot Compact

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K1120 and in Network Settings set: n AET=1120, Host name=K1120, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Author: [email protected], Edition: May ´05

41

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=4 i.e., 575 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

42

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens Fluorospot Compact

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K8200 and in Network Settings set: n AET=8200, Host name=K8200, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Author: [email protected], Edition: May ´05

43

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

44

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens Fluorospot Compact

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K8700 and in Network Settings set: n AET=8700, Host name=K8700, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On

Author: [email protected], Edition: May ´05

45

Siemens DSA Fluorospot Compact with LASER IMAGER Products

n n n n n n n n n n n

n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=2 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

46

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Fluorospot Compact

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K8100 and in Network Settings set: n AET=8100, Host name=K8100, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On

Author: [email protected], Edition: May ´05

47

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

48

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Fluorospot Compact

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8300 and in Network Settings set: n AET=8300, Host name=DV8300, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Imation_gen n set: Size=8INx10IN, Format=1x1,1x2,2x2 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On Author: [email protected], Edition: May ´05

49

Siemens DSA Fluorospot Compact with LASER IMAGER Products n n n n n n n n n n

Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=11.811 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=693c0.w8u (Always=Y), Contrast (dry)=4 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

50

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens Fluorospot Compact

Kodak DryView 8900

Requirements: Fluorospot Compact rel. VD10A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Fluorospot Compact Setup: - into Service select: Set, Configuration, Dicom Print Settings - set Alias=K8900 and in Network Settings set: - AET=8900, Host name=K8900, IPAddr=accordingly, Port=5040 - Create New and set: Camera=Kodak_gen - set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 - set: Own Print AET=eg FLC_PRINT_SCU and Retry=0 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0

Author: [email protected], Edition: May ´05

51

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Siefl87b.w87 (Always=Y) n Contrast= 15 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=flc

Author: [email protected], Edition: May ´05

52

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens Fluorospot Compact

Kodak DryView 8150

Requirements: Fluorospot Compact rel. VD10A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Fluorospot Compact Setup: - into Service select: Set, Configuration, Dicom Print Settings - set Alias=K8150 and in Network Settings set: - AET=DV8150, Host name=K8150, IPAddr=accordingly, Port=5040 - Create New and set: Camera=Kodak_gen - set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 - set: Own Print AET=eg FLC_PRINT_SCU and Retry=0 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2

Author: [email protected], Edition: May ´05

53

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name= Siefl87b.w87 (Always=Y) n Contrast=15 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=flc

Author: [email protected], Edition: May ´05

54

Siemens DSA Fluorospot Compact with LASER IMAGER Products

Fluorospot Compact via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens Fluorospot Compact

Kodak CMI 1000

Requirements: Fluorospot Compact rel. VD10A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Fluorospot Compact Setup: - into Service select: Set, Configuration, Dicom Print Settings - set Alias=CMI1000 and in Network Settings set: - AET=CMI1000, Host name=CMI1000, IPAddr=accordingly, Port=5040 - Create New and set: Camera=Imation_gen - set: Size=8INx10IN, Format=1x1,1x2,2x2 - set: Own Print AET=eg FLC_PRINT_SCU and Retry=0 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality: n Contrast=15 (Always=Y) n TFT Set (From list)=Siefl87b.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=N), Polarity=Positive (Always=N)

Author: [email protected], Edition: May ´05

55

Siemens DSA Fluorospot Compact with LASER IMAGER Products n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

56

Siemens DSA Fluorospot H with some LASER IMAGER Products

Setup for Siemens DSA Fluorospot H with LASER IMAGERS (old Siemens modality, no more in production) Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer ..................................................... 2 n Kodak DryView 8700 LASER IMAGER / Plus................................................................. 3 n Kodak DryView 8700 LASER IMAGER / Standard ......................................................... 4 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer ..................................................... 5 n Kodak DryView 8500 LASER IMAGER / Plus ................................................................. 6 n Kodak DryView 8500 LASER IMAGER / Standard ......................................................... 7 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer ..................................................... 8 n Kodak DryView 8300 LASER IMAGER / Standalone ...................................................... 9 n Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 10 n Kodak Digital Science 969 HQT LASER IMAGER..................................................... 11 n Kodak Digital Science 959 XL LASER IMAGER ........................................................ 12 n Kodak DryView 8100 LASER IMAGER.......................................................................... 13 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ).......... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER.......................................................................... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER........................................................................... 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ........................................................................ 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ........................................................................ 22 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) ..... 24 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4) ..................................................................... 26 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8900 LASER IMAGER ......................................................................... 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 2

Author: [email protected], Edition: November ´04

1

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens Fluorospot H

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3

- Inp ul ti 0M 880 M

er nag Ma tu

w 0 Dry Vie 3M 870

Fiber Cable 8700 Dual

8800 MIM

Requirements: SHPT rel. 1.3, 8800 rel. 4.2, 8700 rel. 1.15 Setup: n on Siemens Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=XL, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 on HOST Menu: n n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on EIB Menu: Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

2

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8700 LASER IMAGER / Plus Siemens Fluorospot H

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

00 3M 87

Dr yView

8700 Plus

Requirements: 8700 rel. 1.15 Setup: n on Siemens Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Plus Setup: n on COMM Menu: n Siemens Default n on SIEMENS Menu: n Modality=Fluoro-H, Timeout=30, Smooth Beta=2, Sharp Beta=2 n on IMAGE Menu: n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

3

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8700 LASER IMAGER / Standard 8700 Standard Siemens Fluorospot H

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI Siemens 37-pin Data Cable

3M 8700

DryView

SPDI

Requirements: 8700 rel. 1.15 Setup: n on Siemens Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Standard Setup: n on TDB/C board: n Jumpers=RS232, Switch=Right n on COMM Menu: n Siemens Default n on SIEMENS Menu: n Modality=Fluoro-H, Timeout=30, Smooth Beta=2, Sharp Beta=2 n on IMAGE Menu: n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 on SYSTEM Menu: n n Memory Management=Best Fit n on EIB Menu: n Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

4

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens Fluorospot H

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

w 0 Dry Vie 3M 870

M 3

ana tM npu t i- I ul 00M 88

er g

Fiber Cable 8500 Dual

8800 MIM

Requirements: SHPT rel. 1.3, 8800 rel. 5.1, 8500 rel. 1.22 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 on HOST Menu: n n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on EIB Menu: Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

5

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8500 LASER IMAGER / Plus Siemens Host Protocol Translator

Siemens Fluorospot H

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3M 8700

Dr yView

8500 Plus

Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8500 Plus Setup: n on COMM Menu: n 959 Default n on IMAGE Menu: n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on SYSTEM Menu: n Memory Management=Best Fit on EIB Menu: n n Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

6

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8500 LASER IMAGER / Standard Siemens Host Protocol Translator

Siemens Fluorospot H

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB Imager

SPDI 9-to-9-pin Copper Cable Siemens 37-pin Data Cable

3M 870

w 0D ry Vie

8500 Standard

Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu: n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 on SYSTEM Menu: Memory Management=Best Fit n n on EIB Menu: Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

7

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens Fluorospot H

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable 8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

POEIB 8800 MIM

Requirements: SHPT rel. 1.3, 8800 rel. 5.1, 8300 rel. 4.4 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=15 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial: Baud=1200, Data=8, Stop=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None, Modality Group=2 8800 Setup: n on COMM Menu: 959 Default n on IMAGE Menu: Density=15, Contrast=4 n on HOST Menu: n Pixel CorreCtion=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on EIB Menu: Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

8

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8300 LASER IMAGER / Standalone Siemens Host Protocol Translator

Siemens Fluorospot H

Siemens 25-pin Control Cable

Host

SPCI Siemens 37-pin Data Cable

8300

RS422 9-pin Copper Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Imager

UKEIB

SPDI

Requirements: SHPT v1.3, 8300 v4.6, 8300 LUT v3.0.3 Note: in case no Pritzel Boxes are used between Fluorospot-H and 8300 (ie direct copper digital Data Cable from Fluorospot-H cabinet to 8300 digital Input Module), then use a short digital Data Cable between Fluorospot-H and 8300 (eg 10mt. max) for image transfer to avoid image acquisition problems. Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=15 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8300 Setup: n on 8300 Operator Menu set: D=15, C=4, Sharp/Smooth=0 ie Auto n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Delimiter=Comma, Protocol=3M n Digital Interface: Parity=None, Modality Group=2

Author: [email protected], Edition: November ´04

9

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak Digital Science  969 HQ LASER IMAGER Siemens Host Protocol Translator

Siemens Fluorospot H

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3M

H Q

L a se r Im a g e r

M969 HQ

Requirements: SHPT rel. 1.3, HQ rel. 4.2 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: n TFT=SIEFL8B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes on EIB Menu: Parity=Disable, Timeout=30 n

Author: [email protected], Edition: November ´04

10

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak Digital Science 969 HQT LASER IMAGER M969 HQT Siemens Fluorospot H

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI

3M

H Q

L a se r I m a g e r

Siemens 37-pin Data Cable SPDI

Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Setup: n on Siemens Fluoro-H install Camera Config.File HQ Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQT Setup: n on TDB/C board: n Jumpers=RS232, Switch=Right n on COMM Menu: n Siemens Default n on SIEMENS Menu: n Modality=Fluoro-H, Timeout=30 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n TFT=PMS, Contrast=15, Density=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

11

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak Digital Science  959 XL LASER IMAGER Siemens Host Protocol Translator

Siemens Fluorospot H

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M L a se r I ma g er

M959 XL

Requirements: SHPT rel. 1.3, XL rel. 3.8 Setup: n on Siemens Fluoro-H install Camera Config.File XL n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=XL, Timeout=30 n on SHPT set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n on XL Input Module install LUT 322A0 Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M959 XL Setup: n on COMM Menu: n 959 Default n on EIB Menu: n Parity=Disable, Timeout=30

Author: [email protected], Edition: November ´04

12

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H with Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens Fluorospot H

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI

Keypad Host

UKEIB Imager

SPDI

9-to-9-pin Copper Cable Siemens 37-pin Data Cable

RS422 9-pole Plug

DryView 8100

Requirements: SHPT v1.3, 8100 v1.1 Setup: n on Siemens Fluoro-H install Camera Config.File DRY_VIEW (if not available HQ) n on SHPT Service Screen set Modality=Fluorospot, Camera Type=XL, Timeout=30 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on SHPT set Density=14 and Contrast=9 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=30, P1,…,P6=0 n on IMAGE QUALITY-> TFT FILES Menu: TFT=SIEPOLY n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=Off n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable

Author: [email protected], Edition: November ´04

13

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) Siemens Host Protocol Translator

Siemens Fluorospot H

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPDI

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable ry Vie w 870 0D 3M

8700 Plus

Fiber Cable Fiber Cable

9410 PACS Link

Requirements: SHPT v1.3, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers. Setup: n on Fluorospot H install Camera Config.File DRYVIEW (if not available HQ) n on SHPT set: Contrast=4, Density=14 n on SHPT Service Screen set Modality=Fluoro-H, Camera=XL, Timeout=30 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Author: [email protected], Edition: November ´04

14

Siemens DSA Fluorospot H with some LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: Printer=8700, Model=8700, Output=Fiber n n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=30, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: Kpad=flH, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Siefl87b.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=4, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: November ´04

15

Siemens DSA Fluorospot H with some LASER IMAGER Products

Siemens Fluorospot H via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens Fluorospot H

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPDI

DryView 8100

RS422 9-pole Plug

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable Control 9-pin

COPCIL Board Copper Cable 9410 PACS Link

Data 37 pin

Requirements: SHPT v1.3, 9410 v1.6, 8100 v2.4.1 Setup: n on Siemens Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) n on SHPT set: Contrast=4, Density=14 n on SHPT Service Screen set Modality=Fluoro-H, Camera=XL, Timeout=30 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Author: [email protected], Edition: November ´04

16

Siemens DSA Fluorospot H with some LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: Printer=8100, Model=8100 4096 pxls/line, Output=Copper n n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=30, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: Kpad=flH, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Siefl87b.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=4, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: November ´04

17

Siemens DSA Fluorospot H with some LASER IMAGER Products

Fluorospot H via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Siemens Fluorospot H

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

Kpad / Host Control Octopus Adaptor Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kodak 160 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: MIM 200 v6.1, KELI 160 v7.2 Fluoro-H Setup: on Siemens Fluoro-H install Camera Config.File XLP MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sieflh, n Mod.Name=flh, Primary Control: Type=Siemens FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0

Author: [email protected], Edition: November ´04

18

Siemens DSA Fluorospot H with some LASER IMAGER Products n n n n n n

Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: November ´04

19

Siemens DSA Fluorospot H with some LASER IMAGER Products

Fluorospot H via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Siemens Siemens 25-pin Fluorospot H Control Cable SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

RS422 37 -to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: MIM 200 v6.1, KELP 2180 v2.17H Fluoro-H Setup: on Siemens Fluoro-H install Camera Config.File XLP MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sieflh, n Mod.Name=flh, Primary Control: Type=Siemens FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Author: [email protected], Edition: November ´04

20

Siemens DSA Fluorospot H with some LASER IMAGER Products n n n n n n n n

Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=2 Formatting: Pixel Pitch=12.6582 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: November ´04

21

Siemens DSA Fluorospot H with some LASER IMAGER Products

Fluorospot H via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER Siemens Siemens 25-pin Fluorospot H Control Cable SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

RS422 37 -to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Fluoro-H Setup: on Siemens Fluoro-H install Camera Config.File XLP MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sieflh, n Mod.Name=flh, Primary Control: Type=Siemens FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Author: [email protected], Edition: November ´04

22

Siemens DSA Fluorospot H with some LASER IMAGER Products n n n n n n n n

Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 Formatting: Trim Width Enabled=0, Trim Width Disabled=0 Formatting: Pixel Pitch=12.5 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: November ´04

23

Siemens DSA Fluorospot H with some LASER IMAGER Products

Fluorospot H via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)

Siemens Siemens 25-pin Fluorospot H Control Cable SPCI

SPDI

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Siemens 37-pin Data Cable

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

00 DryV 3 M 87

iew

Fiber Cable RS422 37-to-50 pin Digital Adaptor Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations and if HQ by installing HQ into Siemens Camera Config.File Fluoro-H Setup: on Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flH, n Mod.Name=flH, Primary Control: Type=3M - FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Author: [email protected], Edition: November ´04

24

Siemens DSA Fluorospot H with some LASER IMAGER Products n n n n n n n n n n n n n n n n n n

Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8700, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2 , Film Contrast=4 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: November ´04

25

Siemens DSA Fluorospot H with some LASER IMAGER Products

Fluorospot H via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER

Siemens Siemens 25-pin Fluorospot H Control Cable SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

RS23-to-RS422 25-to-15 pin Converter Box

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

RS422 37-t o-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: MIM200 v6.1, 8100 v2.4.1 Fluoro-H Setup: on Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flH, n Mod.Name=flH, Primary Control: Type=3M - FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On

Author: [email protected], Edition: November ´04

26

Siemens DSA Fluorospot H with some LASER IMAGER Products

n n n n n n n n

n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8100, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=2 , Film Contrast=4 Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On TFT/ULUT=Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: November ´04

27

Siemens DSA Fluorospot H with some LASER IMAGER Products

Fluorospot H via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8900 LASER IMAGER DICOM Network Siemens Siemens 25-pin Fluorospot H Control Cable SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Kodak DryView 8900

Requirements: Fluorospot-H rel. VE10, MIM 200 v6.1 Requirements: 8900 release 2.0 (ie DRE v2.00.b3, MIM v5.6.b3, MCS v2.00) Fluoro-H Setup: on Siemens Fluoro-H install Camera Config.File Kodak 2180 MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON ie delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=eg MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name= sieflh, n Mod.Name=flh, Primary Control: Type=Siemens FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Network, Qualified, 8900, Set: n General: Log.Name=8900, IP Addr=accordingly n General: Database=8900, Model=8900, Memory=32 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040,AETitle=NER_8900,Counter=40,Response=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On

Author: [email protected], Edition: November ´04

28

Siemens DSA Fluorospot H with some LASER IMAGER Products

n n n n

n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.3 n SCU: Luminance Space= On, Variable Border Density=On n SCU: Curve Shape=On, Perception LUT =On, PLUT Service=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination= 8900, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=15 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On

Author: [email protected], Edition: November ´04

29

Siemens DSA Fluorospot H with some LASER IMAGER Products n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Siefl87b.w87 (Always=Y) n Contrast= 15 (Always=Y), Smoothing Type=2 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=Y) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=fH

Author: [email protected], Edition: November ´04

30

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Setup for Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGERS (note: different models of Iconos, Siregraph, Sireskop could have either the setup of Fluorospot TOP or the setup of Fluorospot Compact) Connection POINT-TO-POINT:

n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer ............................................................................

n Kodak DryView 8700 LASER IMAGER / Plus......................................................................................... n Kodak DryView 8700 LASER IMAGER / Standard ................................................................................. n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer ............................................................................

n Kodak DryView 8500 LASER IMAGER / Plus......................................................................................... n Kodak DryView 8500 LASER IMAGER / Standard ................................................................................. n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer ............................................................................

3 4 5 6 7 8 9

n Kodak DryView 8300 LASER IMAGER / Standalone .............................................................................. 10 n Kodak DryView 8800 MULTI-INPUT MANAGER / n n n n n n n n n n n n n

Kodak DryView 8700 LASER IMAGER / Dual Printer / Kodak DryView 8300 LASER IMAGER / Dual Printer ............................................................................ Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer / Kodak DryView 8500 LASER IMAGER / Dual Printer ............................................................................ Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer / Kodak DryView 8300 LASER IMAGER / Dual Printer ............................................................................ Kodak Digital Science 969 HQ LASER IMAGER ................................................................................ Kodak Digital Science 969 HQT LASER IMAGER ............................................................................. Kodak Digital Science 959 XL LASER IMAGER ................................................................................ Kodak DryView 8100 LASER IMAGER................................................................................................... Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) .............................................................. Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER................................................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .................................................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ................................................................................................. Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ................................................................................................. Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) ( 4) ......................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER ( 4)..............................................................................................

11

13

14 16 17 18 19

21 23 25 27 29

31 33

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v6.1, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Connection via DICOM: n Kodak DryView 8300 LASER IMAGER..................................................................................... 35 n Kodak Digital Science 190 MEDICAL LASER PRINTER .................................................... 36 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / n n n n n n n n n n n n

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)................................................ Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER..................................................................................... Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER..................................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER ...................................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ................................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ................................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)..................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ..................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5)....................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5)....................................................................... Kodak DryView 8900 LASER IMAGER..................................................................................... Kodak DryView 8150 LASER IMAGER..................................................................................... Kodak Color Medical Imager 1000.............................................................................................

Author: [email protected], Edition: May ´05

37 39 41 43 45 47 49

51 53 55 57 59 61

2

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens Fluorospot TOP

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable nager t Ma -Inpu ulti 0M 880 3M

yView 00 Dr 3M 87

Fiber Cable 8700 Dual

8800 MIM

Requirements: Fluoro TOP rel. VB14, SHPT rel. 1.3, 8800 rel. 5.1, 8700 rel. 1.22 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8700 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8700 Dual Setup: n on COMM Menu: n 959 Default n on IMAGE Menu: n if a) images to cam=lin, TFT=SIEFL87B, set at SHPT: C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=0 n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

3

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8700 LASER IMAGER / Plus Siemens Fluorospot TOP

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8700 Plus

Requirements: Siemens Fluoro TOP rel. VB14, 8700 Plus rel. 1.15 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8700 n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Plus Setup: n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Sienet, Timeout=75 n on IMAGE Menu: n if a) images to cam=lin, TFT=SIEFL87B, Dmax=3.00, C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

4

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8700 LASER IMAGER / Standard 8700 Standard Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI iew 00 DryV 3M 87

Siemens 37-pin Data Cable SPDI

Requirements: Siemens Fluorospot TOP rel. VB14, 8700 Standard rel. 1.15 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8700 Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Standard Setup: n on TDB/C board: n Jumpers=RS232, Switch=Center n on COMM Menu: n Siemens Default n on SIEMENS Menu: n Modality=Sienet, Timeout=75 n on IMAGE Menu: n if a) images to cam=lin, TFT=SIEFL87B, Dmax=3.00, C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

5

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens Fluorospot TOP

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

put ulti-In 0M 880 3M

iew 0 DryV 3M 870

er nag Ma

Fiber Cable 8500 Dual

8800 MIM

Requirements: Fluoro TOP rel. VB14, SHPT rel. 1.3, 8800 rel. 5.1, 8500 rel. 1.22 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_DV8500 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: n if a) images to cam=lin, TFT=SIEFL87B, set at SHPT: C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=0 n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

6

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8500 LASER IMAGER / Plus Siemens Host Protocol Translator

Siemens Fluorospot TOP

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

iew 0 DryV 3M 870

8500 Plus

Requirements: Fluorospot TOP rel. VB14, SHPT rel. 1.3, 8500 Plus rel. 1.22 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_DV8500 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8500 Plus Setup: n on COMM Menu: 959 Default n on IMAGE Menu: n if a) images to cam=lin, TFT=SIEFL87B, set at SHPT: C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=0 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

7

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8500 LASER IMAGER / Standard Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI

Keypad Host

UKEIB I mager

SPDI 9-to-9-pin Copper Cable Siemens 37-pin Data Cable

yView 00 Dr 3M 87

8500 Standard

Requirements: Fluoro TOP rel. VB14, SHPT rel. 1.3, 8500 Standard rel. 1.22 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8500 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu: n if a) images to cam=lin, TFT=SIEFL87B, set at SHPT: C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=0 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

8

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable 8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

880 3M

put ulti-In 0M

er Manag

POEIB 8800 MIM

Requirements: Fluoro TOP rel. VB14, SHPT rel. 1.3, 8800 rel. 5.1 Requirements: 8300 rel. 4.6, 8300 LUT rel. 2.0.0 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_DV8300 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n if a), set at SHPT: Contrast=4, Density=15 8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: 1200, 8, 1, Even, Protocol=3M n Digital Interface: Parity=None, if a) Modality Group=2, if b) Modality Group=4 8800 Setup: n on COMM Menu: 959 Default n on IMAGE Menu: Density=15, Contrast=4 n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

9

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8300 LASER IMAGER / Standalone Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

Host

SPCI

8300

RS422 9-pin Copper Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad I mager

UKEIB

Siemens 37-pin Data Cable SPDI

Requirements: Siemens Fluorospot TOP rel. VB14, SHPT rel. 1.3 Requirements: 8300 rel. 4.6, 8300 LUT rel. 2.0.0 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_DV8300 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n if a), set at SHPT: Contrast=4, Density=14 Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8300 Setup: n on 8300 Operator Menu set: n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=Even n if a) set Modality Group=2, if b) set Modality Group=4

Author: [email protected], Edition: May ´05

10

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer / Kodak DryView 8300 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

9-to-9-pin Copper Cable Fiber Cable 37-pin Digital Cable

POEIB 3M

put ulti-In 0M 880

ger Mana

Fiber Cable

iew 0 DryV 3M 870

8300 Dual

8800 MIM 8700 Dual

Requirements: Fluoro TOP VB14, SHPT 1.3, 8800 v.5.1, 8700 v.1.22 Requirements: 8300 rel. 4.6, 8300 LUT rel. 2.0.0 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_MIM8800 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n if a), set at SHPT: Contrast=4, Density=15 Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

Author: [email protected], Edition: May ´05

3 6

7,1 1

18 5

25 9

11

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products 8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n if a) set Modality Group=2, if b) set Modality Group=4 8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: n if a), set TFT=SIEFL87B, set at SHPT: Contrast=4, Density=14 n if b), set TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=0 n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

12

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer / Kodak DryView 8500 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable Fiber Cable 8700 Dual

yView 00 Dr 3M 87

3M

er nag ut Ma lti-Inp 0 Mu 880

Fiber Cable

yView 00 Dr 3M 87

8800 MIM 8500 Dual

Requirements: Fluoro TOP VB14, SHPT 1.3, 8800 v.5.1, 8700 v.1.22, 8500 v.1.22 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_MIM8800 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8800/8700 Dual/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: if a), set TFT=SIEFL87B, set at SHPT: C=4, D=14 n on IMAGE Menu: if b), set TFT=SIEWS87B, Dmax=3.00, C=2, D=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=0 n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

13

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer / Kodak DryView 8300 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

9-to-9-pin Copper Cable Fiber Cable 37-pin Digital Cable

POEIB 3M

put ulti-In 0M 880

ger Mana

Fiber Cable

iew 0 DryV 3M 870

8300 Dual

8800 MIM 8500 Dual

Requirements: Fluoro TOP VB14, SHPT 1.3, 8800 v.5.1, 8500 v.1.22 Requirements: 8300 rel. 4.6, 8300 LUT rel. 2.0.0 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_MIM8800 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n if a), set at SHPT: Contrast=4, Density=15 Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

Author: [email protected], Edition: May ´05

3 6

7,1 1

18 5

25 9

14

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products 8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n if a) set Modality Group=2, if b) set Modality Group=4 8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: n if a), set TFT=SIEFL87B, set at SHPT: Contrast=4, Density=14 n if b), set TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=0 n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

15

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak Digital Science 969 HQ LASER IMAGER Siemens Host Protocol Translator

Siemens Fluorospot TOP

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M

H Q

L a ser Im ag er

M969 HQ

Requirements: Flurospot TOP rel. VB14, SHPT rel. 1.3, M969 HQ rel. 5.1 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQ Setup: n on COMM Menu: n 959 Default n on IMAGE Menu: n if a), set TFT=SIEFC969 (or SIEFL87B), set at SHPT: C=4, D=14 n if b), set TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on EIB Menu: n Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

16

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak Digital Science 969 HQT LASER IMAGER M969 HQT Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI

3 M

H Q

L a s er Im a g e r

Siemens 37-pin Data Cable SPDI

Requirements: Fluoro TOP rel. VB14, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0. Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_M969_HQ Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQT Setup: n on TDB/C board: Jumpers=RS232, Switch=Center n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Sienet, Timeout=75 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n if a), TFT=PMS, C=15, D=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

17

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluoro-TOP VB14 with Kodak Digital Science 959 XL LASER IMAGER Siemens Host Protocol Translator

Siemens Fluorospot TOP

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3M L a s e r I m a g er

M959 XL

Requirements: Siemens Fluoro TOP rel. VB14, SHPT rel. 1.3, M959 XL rel. 3.8 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_M959_XL n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n if a), on SHPT set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n on XL Input Module install LUT 322A0 Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M959 XL Setup: n on COMM Menu: n 959 Default n on EIB Menu: n Parity=Enable Even, Timeout=75

Author: [email protected], Edition: May ´05

18

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Siemens Fluorospot TOP VB14 with Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI

Keypad Host

UKEIB Imager

SPDI

9-to-9-pin Copper Cable Siemens 37-pin Data Cable

RS422 9-pole Plug

DryView 8100

Requirements: Siemens Fluoro TOP rel. VB14, SHPT v1.3, 8100 v1.1 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera, in this case use Dmax=300, C=4, TFT=SIEFL87B d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density, LUT into Camera, then in this case use Dmax=300, C=2, TFT=WRKSTN2A. Note: Fluoro-TOP VB14 could be with: edit/parameter/update/Optimize Image set to Yes or No n if Optimize Image=No image sent from F-TOP to camera is always 20 Meg n if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8700 n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n in case of a) on SHPT set Contrast=4, Density=14 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Author: [email protected], Edition: May ´05

19

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=75, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=a) SIEFL87B or b) WRKSTN2A n on LOCAL PANEL: Contrast=a) 4 or b) 2, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4096 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

20

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluoro-TOP via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPDI

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable iew 00 DryV 3M 87

8700 Plus

Fiber Cable Fiber Cable

9410 PACS Link

Requirements: Fluorospot TOP VB14A, SHPT v1.3, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into Fluorospot TOP Camera Config.File Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP

Author: [email protected], Edition: May ´05

21

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density LUT into Camera, then in this case use Dmax=300, C=2, TFT=WRKSTN2A Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Setup: n on Siemens Fluoro TOP rel. VB14A install Camera Config.File Imation_DV8700 n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n in case of a) on SHPT set Contrast=4, Density=14 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=75, Parity=Even, Memory=22 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=flTOP, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87, Multi-Printer Resp.=Off n Autoswitching=Off, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=a) 4 or b) 2, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

22

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens Fluorospot TOP

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPDI

DryView 8100

RS422 9-pole Plug

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable Control 9-pin

COPCIL Board Copper Cable 9410 PACS Link

Data 37 pin

Requirements: Fluorospot TOP VB14A, SHPT v1.3, 9410 v1.6, 8100 v2.4.1 Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density LUT into Camera, then in this case use Dmax=300, C=2, TFT=WRKSTN2A

Author: [email protected], Edition: May ´05

23

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Setup: n on Fluoro TOP install Camera Config.File Imation_DV8700 (or if problems XL_959) n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n in case of a) on SHPT set Contrast=4, Density=14 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=75, Parity=Even, Memory=22 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=flTOP, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87, Multi-Printer Resp.=Off n Autoswitching=Off, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=a) 4 or b) 2, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

24

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Siemens Fluorospot TOP

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

Kpad / Host Control Octopus Adaptor Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kodak 160 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Fluorospot TOP VB14A Requirements: MIM 200 v6.1, KELI 160 v7.2 Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density LUT into Camera, then use Dmax=300, Curve Shape=0.0, Film Contrast=0 Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Fluoro-TOP Setup: on Fluoro TOP VB14A install Camera Config.File Kodak_190

Author: [email protected], Edition: May ´05

25

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot TOP DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=ftop, n Mod.Name=ftop, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=Even, Timer=5, Sync=On, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=a) 3.0 or b) 0.0, Auto Study=Off, Console=On 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

26

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Siemens Fluorospot TOP

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Fluorospot TOP VB14A Requirements: MIM 200 v6.1, KELP 2180 v2.17H Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density LUT into Camera, then use Dmax=300, Curve Shape=0.0, Film Contrast=0 Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Fluoro-TOP Setup: on Fluoro TOP VB14A install Camera Config.File Kodak_2180

Author: [email protected], Edition: May ´05

27

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot TOP DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=ftop, n Mod.Name=ftop, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=Even, Timer=5, Sync=On, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=a) 3.0 or b) 0.0, Auto Study=Off, Console=On 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

28

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER Siemens Fluorospot TOP

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Fluorospot TOP VB14A Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density LUT into Camera, then use Dmax=300, Curve Shape=0.0, Film Contrast=0 Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Fluoro-TOP Setup: on Fluoro TOP VB14A install Camera Config.File Kodak_1120

Author: [email protected], Edition: May ´05

29

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot TOP DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=ftop, n Mod.Name=ftop, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=Even, Timer=5, Sync=On, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=a) 3.0 or b) 0.0, Auto Study=Off, Console=On 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

30

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) Siemens Fluorospot TOP

Siemens 25-pin Control Cable

SPCI

SPDI

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Siemens 37-pin Data Cable

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

ew 0 DryVi 3M 870

Fiber Cable RS422 37-to-50 pin Digital Adaptor Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Fluorospot TOP VB14A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations and in case of 8500 and HQ by installing 8500 and HQ into Fluorospot TOP Camera Config.File. Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density LUT into Camera, then in this case use Dmax=300, C=2, TFT=WRKSTN2A Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No

Author: [email protected], Edition: May ´05

31

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products Fluoro-TOP Setup: on Fluoro TOP VB14A install Camera Config.File Imation_DV8700 MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot TOP DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=ftop, n Mod.Name=ftop, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=Even, Timer=5, Sync=On, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2 n Film Contrast=a) 4 or b) 2, Image Dmax=3.00, Border=Black, Collation=Off n Auto Print=On, TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Auto Study=Off, Console=On, Annotation=Off

Author: [email protected], Edition: May ´05

32

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

33

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER Siemens Fluorospot TOP

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

RS23-to-RS422 25-to-15 pin Converter Box

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

RS422 37-to-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: Fluorospot TOP VB14A Requirements: MIM200 v6.1, 8100 v2.4.1 Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density LUT into Camera, then in this case use Dmax=300, C=2, TFT=WRKSTN2A Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Fluoro-TOP Setup: on Fluoro TOP VB14A install Camera Config.File Imation_DV8700 (or if problems XL_959)

Author: [email protected], Edition: May ´05

34

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot TOP DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sct, n Mod.Name=sct, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=Even, Timer=5, Sync=On, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2 n Film Contrast=a) 4 or b) 2, Image Dmax=3.00, Border=Black, Collation=Off n Auto Print=On, TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Auto Study=Off, Console=On, Annotation=Off

Author: [email protected], Edition: May ´05

35

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

36

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

DryView 8300 Siemens Fluorospot TOP

Requirements: Siemens Fluorospot TOP rel. VC01B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8300_Dicom, n DICOM services=PRINT_SCP, aet=IMN_8300, port=104, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always aprox 5 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 5 Meg In case any formats-problem appears on F-TOP (e.g., 2:1 not ok), set Optimize Image=No 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: n Modality Group=4 (i.e., LUT=linear-in-Density)

Author: [email protected], Edition: May ´05

37

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens Fluorospot TOP

Kodak 190 camera

Requirements: Fluorospot TOP rel. VC01B Requirements: 190 rel. 1.7.29 Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K190 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Kodak_190_Dicom, n DICOM services=PRINT_SCP, aet=190, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

38

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) DICOM Network 8700 Plus

Siemens Fluorospot TOP

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

9410 PACS Link

Requirements: Fluorospot TOP rel. VC01B Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and if HQ by installing HQ into Fluoro-TOP DICOM Camera Config.File Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8700 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8700_Dicom, n DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No 9410 Setup: Author: [email protected], Edition: May ´05

39

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products n on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

40

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Fluorospot TOP

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

9410 PACS Link DryView 8100

Requirements: Fluorospot TOP rel. VC01B Requirements: 9410 v1.6, 8100 v2.4.1 Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8100 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8100_Dicom, n DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No

Author: [email protected], Edition: May ´05

41

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

42

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Fluorospot TOP

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Fluorospot TOP rel. VC01B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8300_Dicom, n DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always aprox 5 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 5 Meg In case any formats-problem appears on F-TOP (e.g., 2:1 not ok), set Optimize Image=No

Author: [email protected], Edition: May ´05

43

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

44

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens Fluorospot TOP

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, KELI 160 v7.2 Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K160 Dicom Printer, n modality type=DICOM_PRINTER, n camera type=Kodak_160_Dicom (or Kodak_190_Dicom), n DICOM services=PRINT_SCP, aet=160, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No

Author: [email protected], Edition: May ´05

45

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

46

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens Fluorospot TOP

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K2180 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Kodak_2180_Dicom, n DICOM services=PRINT_SCP, aet=2180, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No

Author: [email protected], Edition: May ´05

47

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

48

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens Fluorospot TOP

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K1120 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Kodak_1120_Dicom, n DICOM services=PRINT_SCP, aet=1120, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No

Author: [email protected], Edition: May ´05

49

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

50

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens Fluorospot TOP

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Fluorospot TOP rel. VD10A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on Fluoro-TOP only a DICOM camera could be installed Note: on Fluoro-TOP Service-CD nbr.7 is present 8200 Camera Config.File Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K8200 Dicom Printer, n modality type=DICOM_PRINTER, n camera type=Kodak_8200_Dicom (or Kodak_190_Dicom), n DICOM services=PRINT_SCP, aet=8200, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No MIM200 Setup: n on Configure, Network:

Author: [email protected], Edition: May ´05

51

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

52

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) DICOM Network

iew 00 DryV 3M 87

Siemens Fluorospot TOP

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: on Fluoro-TOP only a DICOM camera could be installed Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into Fluoro-TOP DICOM Camera Config.File Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8700 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8700_Dicom, n DICOM services=PRINT_SCP, aet=8700, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No

Author: [email protected], Edition: May ´05

53

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

54

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Fluorospot TOP

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8100 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8100_Dicom, n DICOM services=PRINT_SCP, aet=8100, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: Author: [email protected], Edition: May ´05

55

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

56

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Fluorospot TOP

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8300_Dicom, n DICOM services=PRINT_SCP, aet=8300, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always aprox 5 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 5 Meg In case any formats-problem appears on F-TOP (e.g., 2:1 not ok), set Optimize Image=No

Author: [email protected], Edition: May ´05

57

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

58

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens Fluorospot TOP

Kodak DryView 8900

Requirements: Fluorospot TOP rel. VC01B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup (using Imation 969 HQ Config.file): - into Sevice Login (at Unix level), from service menu do sit install: - from main menu do: edit/config/create - node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Imation_969_HQ_Dicom, - DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - edit/parameter/update - DICOM Print Camera=kodakd - images to camera=non-linear - optimize matrix size for camera=no - HCC density=300 - exit/exit (ie in order to return to main menu) - from main menu do: install/net - exit/exit (ie in order to return to main menu) - dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case of formats-problem on F-TOP (eg 12:1 not ok), set Optimize Image=No 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM

Author: [email protected], Edition: May ´05

59

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Wrkstn2a.w87 (Always=Y) n Contrast= 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ftop

Author: [email protected], Edition: May ´05

60

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens Fluorospot TOP

Kodak DryView 8150

Requirements: Fluorospot TOP rel. VC01B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on Fluoro-TOP only a DICOM camera could be installed Note: on Fluoro-TOP Service-CD nbr.7 is present 8200 Camera Config.File Fluorospot TOP Setup (using Imation 969 HQ Config.file): - into Sevice Login (at Unix level), from service menu do sit install: - from main menu do: edit/config/create - node name=kodakd (max 6 chars), component name=DV8150 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_8200_Dicom, - DICOM services=PRINT_SCP, aet=DV8150, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - edit/parameter/update - DICOM Print Camera=kodakd - images to camera=non-linear - optimize matrix size for camera=no - HCC density=300 - exit/exit (ie in order to return to main menu) - from main menu do: install/net - exit/exit (ie in order to return to main menu) - dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case of formats-problem on F-TOP (eg 12:1 not ok), set Optimize Image=No 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:

Author: [email protected], Edition: May ´05

61

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ftop

Author: [email protected], Edition: May ´05

62

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products

Fluorospot TOP via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens Fluorospot TOP

Kodak CMI 1000

Requirements: Fluorospot TOP rel. VC01B Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: - into Sevice Login (at Unix level), from service menu do sit install: - from main menu do: edit/config/create - node name=kodakd (max 6 chars), component name=CMI1000 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Imation_DV8300_Dicom, - DICOM services=PRINT_SCP, aet=CMI1000, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - edit/parameter/update - DICOM Print Camera=kodakd - images to camera=non-linear - optimize matrix size for camera=no - HCC density=300 - exit/exit (ie in order to return to main menu) - from main menu do: install/net - exit/exit (ie in order to return to main menu) - dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always aprox 5 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 5 Meg In case formats-problem appears on F-TOP (eg 2:1 not ok), set Optimize Image=No CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 Author: [email protected], Edition: May ´05

63

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products n n n n n n

n

n

Modality (SCU) Config (or after modality recognition): Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No Note: Color IQ settings used when images sent with Color DICOM SOP under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: under Image Quality, Grayscale Image Quality: n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No Save Changes and Exit

Author: [email protected], Edition: May ´05

64

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Setup for Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGERS Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer ..................................................... 2 n Kodak DryView 8700 LASER IMAGER / Plus ................................................................. 3 n Kodak DryView 8700 LASER IMAGER / Standard ......................................................... 4 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer ..................................................... 5 n Kodak DryView 8500 LASER IMAGER / Plus ................................................................. 6 n Kodak DryView 8500 LASER IMAGER / Standard ......................................................... 7 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer ..................................................... 8 n Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 9 n Kodak Digital Science 969 HQT LASER IMAGER..................................................... 10 n Kodak Digital Science 959 XL LASER IMAGER ........................................................ 11 n Kodak DryView 8100 LASER IMAGER.......................................................................... 12 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) ( 1)................................... 13 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1) ..................................................................... 15 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) .................................................................. 17 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER ( 2,3,4)............................................................... 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER ( 2,3,4)............................................................... 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) ( 4)................................... 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4) ..................................................................... 25

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 2

Author: [email protected], Edition: November ´04

1

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with| Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer Keypad

Siemens HICOR

Keypad

UKEIB Video Cable VEIB with PLL

Video OUT

Fiber Cable Fiber Cable

3

- Inp ul ti 0M 880 M

er nag Ma tu

w 0 Dry Vie 3M 870

Fiber Cable 8700 Dual

8800 MIM

Requirements: 8800 rel. 5.1, 8700 rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8700 Dual Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=15, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

2

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak DryView 8700 LASER IMAGER / Plus Keypad

Siemens HICOR

Keypad

UKEIB

Video OUT

Video Cable VEIB with PLL Fiber Cable Fiber Cable

3M 8700

Dr yView

8700 Plus

Requirements: 8700 Plus rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=15, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

3

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak DryView 8700 LASER IMAGER / Standard 8700 Standard Keypad Siemens HICOR 3M 8700

DryView

Video Cable Video OUT

Requirements: 8700 Standard rel. 1.22 8700 Standard Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=30, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

4

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer Keypad

Siemens HICOR

Keypad

UKEIB Video Cable VEIB with PLL

Video OUT

Fiber Cable Fiber Cable

3

- Inp ul ti 0M 880 M

er nag Ma tu

w 0 Dry Vie 3M 870

Fiber Cable 8500 Dual

8800 MIM

Requirements: 8800 rel. 5.1, 8500 rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8500 Dual Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=15, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

5

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak DryView 8500 LASER IMAGER / Plus Keypad

Siemens HICOR

Keypad

UKEIB

Video OUT

Video Cable VEIB with PLL Fiber Cable Fiber Cable

3M 8700

Dr yView

8500 Plus

Requirements: 8500 Plus rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=15, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

6

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak DryView 8500 LASER IMAGER / Standard 8500 Standard Keypad Siemens HICOR 3M 8700

DryView

Video Cable Video OUT

Requirements: 8500 Standard rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Left n on COMM Menu: 8700 Keypad Default n on IMAGE Menu: TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=30, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

7

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer Keypad

Siemens HICOR

Keypad

UKEIB Video Cable Video OUT

VEIB with PLL Fiber Cable Fiber Cable

8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

POEIB 8800 MIM

Requirements: 8800 rel. 5.1, 8300 rel. 4.4 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8300 Setup: n on 8300 Operator Menu set: n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=0 8800 Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n Density=16, Contrast=10 n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=15, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd Author: [email protected], Edition: November ´04

8

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak Digital Science  969 HQ LASER IMAGER Keypad

Siemens HICOR

Keypad

UKEIB Video Cable Video OUT

VEIB with PLL Fiber Cable Fiber Cable

3M

H Q

L a se r Im a g e r

M969 HQ

Requirements: M969 HQ rel. 5.1 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON M969 HQ Setup: n on COMM Menu: n 969 Default on IMAGE Menu: n n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=15, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

9

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak Digital Science 969 HQT LASER IMAGER Keypad

M969 HQT

Siemens HICOR 3M

H Q

L a se r I m a g e r

Video Cable Video OUT

Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 M969 HQT Setup: n on TDB/C board: Jumpers=RS422, Switch=Left n on COMM Menu: 8700 Keypad Default n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n TFT=PMS, Contrast=15, Density=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=30, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

10

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak Digital Science  959 XL LASER IMAGER XL Keypad

Siemens HICOR

Keypad

KEIB Video Cable Video OUT

VEIB with PLL Fiber Cable Fiber Cable

3 M L a se r I ma g er

M959 XL

Requirements: M959 XL rel. 3.8 Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on KEIB set Jumper=RS422 n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu: n 959 Default n on EIB Menu: n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=15, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd

Author: [email protected], Edition: November ´04

11

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR/ACOM with Kodak DryView 8100 LASER IMAGER Keypad

Keypad

UKEIB Imager

Copper Cable RS422 9-pole Plug

Siemens HICOR Video Cable Video OUT

DryView 8100

Requirements: 8100 v1.1 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=SIEPOLY n on LOCAL PANEL Menu: Contrast=12, Density=2.90 n on SYSTEM Menu: Acquire=Video n on VIDEO Menu: Parameters as per autosync aprox Interlace=ON, Image Height=1092, Horiz.Tot=1440, Image Width=1092

Author: [email protected], Edition: November ´04

12

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)

Keypad

Siemens HICOR

Keypad

UKEIB

Imager

Video Cable Video OUT Copper Cable Imagraph Card Octopus Cable 3M870

w 0Dr yVie

Fiber Cable

RS422 Copper Converter Cable

DryView 8700 Plus Fiber Cable 9410 PACS Link

Requirements: Hicor rel. VA30E, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers. Hicor Setup: on Hicor set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, Serial Ports Menu: n COM3: Protocol=SuperSet, Parity=None, Baud Rate=19200

Author: [email protected], Edition: November ´04

13

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

n n n n n n

on I/O CARD SETUP, Imagraph Video Menu (aprox): Vert.Tot=1249, Frame Period=40, Interlace=ON, Vert.Back Porch=71.0 Image Height=1022, Horiz.Tot=1440, Horiz.Back Sync=310 Image Width=1024, Horiz.Sync Width=2486, Horiz.Back Porch=297 on Device Setup, IMS KEYPADS: Kpad=hicor, Hosp=siemens, Serial Port=COM3, Image Card=Imagraph, Ch=A1 Available Printers=8700, Film Destination=Processor, TFT/ULUT=Siepoly.w87 into Defaults: Dest=8700, Size=14x17, C=10, D=15, Dmax=3.1, Bit=8

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: November ´04

14

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR / ACOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER

Keypad

Siemens HICOR

Keypad

UKEIB

Imager

Video Cable Video OUT Copper Cable DryView 8100

RS422 9-pole Plug

Imagraph Card Octopus Cable Control 9-pin

COPCIL Board Copper Cable

Data 37 pin

RS422 Copper Converter Cable

9410 PACS Link

Requirements: Hicor rel. VA30E, 9410 v1.6, 8100 v2.4.1 Hicor Setup: n on Hicor set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, O utput=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, Serial Ports Menu: n COM3: Protocol=SuperSet, Parity=None, Baud Rate=19200 on I/O CARD SETUP, Imagraph Video Menu (aprox): n Vert.Tot=1249, Frame Period=40, Interlace=ON, Vert.Back Porch=71.0 n Image Height=1022, Horiz.Tot=1440, Horiz.Back Sync=310 n Image Width=1024, Horiz.Sync Width=2486, Horiz.Back Porch=297

Author: [email protected], Edition: November ´04

15

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products on Device Setup, IMS KEYPADS: n Kpad=hicor, Hosp=siemens, Serial Port=COM3, Image Card=Imagraph, Ch=A1 n Available Printers=8100, Film Destination=Processor, TFT/ULUT=Siepoly.w87 n into Defaults: Dest=8100, Size=14x17, C=10, D=15, Dmax=3.1, Bit=8 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: November ´04

16

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR/ACOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Keypad Siemens HICOR

Kpad / Host Control Octopus Adaptor Cable Crossed Network Cable

Video Cable

Kodak 160 camera

Video Card Octopus Cable

Video OUT

Kodak MIM 200

Requirements: Hicor rel. VA30E Requirements: MIM 200 v6.1, KELI 160 v7.2 Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On

Author: [email protected], Edition: November ´04

17

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products n n n n n n n n n

Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination=KELI 160, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n n into Machine Setup Menu set: Tonescaling=CurveShape 160 Setup:

no modality-specific setup needed

Author: [email protected], Edition: November ´04

18

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR/ACOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Keypad Siemens HICOR

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

Video Cable

Video Card Octopus Cable

Video OUT

Kodak MIM 200

Requirements: Hicor rel. VA30E Requirements: MIM 200 v6.1, KELP 2180 v2.17H Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On Author: [email protected], Edition: November ´04

19

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products n n n n n n n n n n

Formatting: True Landscape=On Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=2 Formatting: Pixel Pitch=12.6582 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination= KELP 2180, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: November ´04

20

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR/ACOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER Keypad Siemens HICOR

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

Video Cable

Video Card Octopus Cable

Video OUT

Kodak MIM 200

Requirements: Hicor rel. VA30E Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On Author: [email protected], Edition: November ´04

21

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products n n n n n n n n n n

Formatting: True Landscape=On Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 Formatting: Trim Width Enabled=0, Trim Width Disabled=0 Formatting: Pixel Pitch=12.5 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination= KELP 1120, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: November ´04

22

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR/ACOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)

Keypad Siemens HICOR

Video OUT

Kpad / Host Control Octopus Adaptor Cable

700 3M8

iew Dr yV

Fiber Cable

Video Cable

Video Card Octopus Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Hicor rel. VA30E Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Author: [email protected], Edition: November ´04

23

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products n n n n n n n n n n n n n n n n n

Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination= 8700, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=10 n Image Dmax=2.90, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Siepoly.w87, Auto Study=Off, Console=On, Annotation=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: November ´04

24

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

Siemens HICOR/ACOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER Keypad Siemens HICOR

Video OUT

RS422 9-pole Plug

Kpad / Host Control Octopus Adaptor Cable COPCIL Board Copper Cable

Video Cable

Control 9-pin

Video Card Octopus Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: Hicor rel. VA30E Requirements: MIM200 v6.1, 8100 v2.4.1 Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Author: [email protected], Edition: November ´04

25

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products

n n n n n n n n

n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination= 8100, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=10 Image Dmax=2.90, Border=Black, Collation=Off, Auto Print=On TFT/ULUT= Siepoly.w87, Auto Study=Off, Console=On, Annotation=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: November ´04

26

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens DSA Polytron TOP / Angiostar / Multistar / Neurostar with LASER IMAGERS Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer ..................................................... 2 n Kodak DryView 8700 LASER IMAGER / Plus ................................................................. 3 n Kodak DryView 8700 LASER IMAGER / Standard ......................................................... 4 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual................................................................ 5 n Kodak DryView 8500 LASER IMAGER / Plus ................................................................. 6 n Kodak DryView 8500 LASER IMAGER / Standard ......................................................... 7 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer ..................................................... 8 n Kodak DryView 8300 LASER IMAGER / Standalone ...................................................... 9 n Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 10 n Kodak Digital Science 969 HQT LASER IMAGER..................................................... 11 n Kodak Digital Science 959 XL LASER IMAGER ........................................................ 12 n Kodak DryView 8100 LASER IMAGER.......................................................................... 13 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) ( 1)................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1) ..................................................................... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) .................................................................. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER ( 2,3,4)............................................................... 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER ( 2,3,4)............................................................... 22 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) ( 4)................................... 24 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4) ..................................................................... 26

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 2

Author: [email protected], Edition: November ´04

1

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer Keypad

Siemens Polytron TOP

Keypad

Video Cable for Footswitch

Footswitch

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3

- Inp ul ti 0M 880 M

er nag Ma tu

w 0 Dry Vie 3M 870

Fiber Cable 8700 Dual

8800 MIM

Requirements: Polytron TOP rel. VD07E, 8800 rel. 5.1, 8700 rel. 1.22 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8800/8700 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu: Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

2

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8700 LASER IMAGER / Plus Keypad

Siemens Polytron TOP

Keypad

Video Cable for Footswitch

Footswitch

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3M 8700

Dr yView

8700 Plus

Requirements: Siemens Polytron TOP rel. VD07E, 8700 Plus rel. 1.22 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu: n 969 Default on IMAGE Menu: n n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

3

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8700 LASER IMAGER / Standard Siemens Polytron TOP

Keypad

Video cable for Footswitch SPDI

Siemens 37-pin Data Cable

w 0 Dr yVie 3M 870

8700 Standard

Requirements: Siemens Polytron TOP rel. VD07E, 8700 Standard rel. 1.22 8700 Standard Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

4

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Keypad

Siemens Polytron TOP

Keypad

Video Cable for Footswitch

Footswitch

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3

- Inp ul ti 0M 880 M

er nag Ma tu

w 0 Dry Vie 3M 870

Fiber Cable 8500 Dual

8800 MIM

Requirements: Polytron TOP rel. VD07E, 8800 rel. 5.1, 8500 rel. 1.22 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8800/8500 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu: Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

5

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8500 LASER IMAGER / Plus Keypad

Siemens Polytron TOP

Keypad

Video cable for Footswitch

Footswitch

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3M 8700

Dr yView

8500 Plus

Requirements: Polytron TOP rel. VD07E, 8500 Plus rel. 1.22 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu: n 969 Default on IMAGE Menu: n n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

6

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8500 LASER IMAGER / Standard Siemens Polytron TOP

Keypad

Video cable for Footswitch SPDI

Siemens 37-pin Data Cable

w 0 Dr yVie 3M 870

8500 Standard

Requirements: Polytron TOP rel. VD07E, 8500 Standard rel. 1.22 8500 Standard Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

7

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer Keypad

Siemens Polytron TOP

Keypad Footswitch UKEIB

Video Cable for Footswitch Siemens 37-pin Data Cable

DEIB

SPDI

Fiber Cable Fiber Cable 8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

800 M8 3

er g an a tM npu l ti- I Mu

POEIB 8800 MIM

Requirements: Polytron TOP rel. VD07E, 8800 rel. 5.1, 8300 rel. 4.2 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8300 Setup: n on 8300 Operator Menu set: n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=0 8800 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: Density=16, Contrast=10 n on EIB Menu: Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

8

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8300 LASER IMAGER / Standalone Keypad

Video Cable for Footswitch

Siemens Polytron TOP

8300 Siemens 37-pin Data Cable SPDI

Requirements: Siemens Polytron TOP rel. VD07E, 8300 rel. 4.2 8300 Setup: n on 8300 Operator Menu set: n Density=16 n Contrast=10 n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Protocol=Keypad n Digital Interface: Parity=Odd n Modality Group=0

Author: [email protected], Edition: November ´04

9

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak Digital Science  969 HQ LASER IMAGER Keypad

Siemens Polytron TOP

Keypad

Video Cable for Footswitch

Footswitch

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3M

H Q

L a se r Im a g e r

M969 HQ

Requirements: Polytron TOP rel. VD07E, M969 HQ rel. 5.1 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON M969 HQ Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu: n Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

10

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak Digital Science 969 HQT LASER IMAGER Keypad

Video Cable for Footswitch

Siemens Polytron TOP

M969 HQT Siemens 37-pin Data Cable SPDI

3M

H Q

L a se r Im a g e r

Requirements: Polytron TOP rel. VD07E, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 M969 HQT Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n TFT=PMS, Contrast=15, Density=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

11

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak Digital Science  959 XL LASER IMAGER XL Keypad

Video Cable for Footswitch

Siemens Polytron TOP

Keypad Footswitch

KEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M L a se r I ma g er

M959 XL

Requirements: Siemens Polytron TOP rel. VD07E, M959 XL rel. 3.8 Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on KEIB set Jumper=RS422 n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu: n 959 Default on EIB Menu: n n Parity=Enable Odd, Timeout=10

Author: [email protected], Edition: November ´04

12

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak DryView 8100 LASER IMAGER Keypad

Keypad

Video Cable for Footswitch

UKEIB Footswitch

Imager

Copper Cable RS422 9-pole Plug

Siemens Polytron TOP

Siemens 37-pin Data Cable SPDI

DryView 8100

Requirements: Polytron TOP rel. VD07E, 8100 v1.1 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=SIEPOLY n on LOCAL PANEL Menu: Contrast=12, Density=2.90 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Odd

Author: [email protected], Edition: November ´04

13

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) Keypad

Siemens Polytron TOP

Keypad

Video Cable for Footswitch

Footswitch

SPDI

Siemens 37-pin Data Cable

UKEIB Copper Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable

3M 8700

8700 Plus

DryView

Fiber Cable Fiber Cable

9410 PACS Link

Requirements: Polytron TOP rel. VD07E, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers. Note: a footswitch possibility is available Polytron TOP Setup: n press Shift F4 to enter in Service Mode n into the menu Install/Config.System/Image/HC Type n set SPDI to disable Footswitch or Remote SPDI to enable Footswitch Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center

Author: [email protected], Edition: November ´04

14

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: Printer=8700, Model=8700, Output=Fiber n n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=10, Parity=Odd, Memory=7 n Serial Port: Protocol=SuperSet, Parity=None, Baud Rate=19200 on Device Setup, IMS KEYPADS: Kpad=polyTOP, Hosp=sms, Serial Port=DPI4 A KPAD, Image=DPI4 A DATA n n Available Printers=8700, Film Destination=Processor, TFT/ULUT=Siepoly.w87 n into Defaults: Dest=8700, Size=14x17, C=10, D=13, Dmax=2.9, Bit=8 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: November ´04

15

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER Keypad

Siemens Polytron TOP

Footswitch

SPDI

DryView 8100

Keypad

Video Cable for Footswitch

RS422 9-pole Plug

UKEIB

Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable Control 9-pin

COPCIL Board Copper Cable 9410 PACS Link

Data 37 pin

Requirements: Polytron TOP rel. VD07E, 9410 v1.6, 8100 v2.4.1 Note: a footswitch possibility is available Polytron TOP Setup: n press Shift F4 to enter in Service Mode n into the menu Install/Config.System/Image/HC Type n set SPDI to disable Footswitch or Remote SPDI to enable Footswitch Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=10, Parity=Odd, Memory=7 n Serial Port: Protocol=SuperSet, Parity=None, Baud Rate=19200 on Device Setup, IMS KEYPADS: n Kpad=polyTOP, Hosp=sms, Serial Port=DPI4 A KPAD, Image=DPI4 A DATA

Author: [email protected], Edition: November ´04

16

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products n Available Printers=8100, Film Destination=Processor, TFT/ULUT=Siepoly.w87 n into Defaults: Dest=8100, Size=14x17, C=10, D=13, Dmax=2.9, Bit=8

Author: [email protected], Edition: November ´04

17

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: November ´04

18

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Siemens Polytron TOP

Keypad

Kpad / Host Control Octopus Adaptor Cable Crossed Network Cable

SPDI

Siemens 37-pin Data Cable

Kodak 160 camera

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Polytron TOP rel. VD07E Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side to coax-to-RJ-connector pinout

RJ connector side viewed as you would insert the RJ plug into your mouth, with the click up

central extern pin shield Very Middl left e right !!!! !!!! ! !

Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input, Direct Conn,Config.Add, Digital,Qual=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)

Author: [email protected], Edition: November ´04

19

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n

Supported Item: Collation=On, Text=On, Tonescaling on Image=On Supported Item: Pivot Density=On, Rotation=On Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination=KELI 160, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 160 Setup:

no modality-specific setup needed

Author: [email protected], Edition: November ´04

20

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Siemens Polytron TOP

Keypad

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

SPDI

Siemens 37-pin Data Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Polytron TOP rel. VD07E Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side to coax-to-RJ-connector pinout

RJ connector side viewed as you would insert the RJ plug into your mouth, with the click up

central extern pin shield Very Middl left e right !!!! !!!! ! !

Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input, Direct Conn,Config.Add, Digital,Qual=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) Author: [email protected], Edition: November ´04

21

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n

n

Media Info:Media=35x35cm,4136x4136,4006, (Blue) Media Info: Media=11x14in, 3240x4136, 4006, (Blue) Media Info: Media=8x10in, 2290x2840, 2710, (Blue) Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On Format Types: C ustom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=2 Formatting: Pixel Pitch=12.6582 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination= KELP 2180, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape

2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: November ´04

22

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER

Siemens Polytron TOP with Kodak MIM 200 / KELP 1120 Siemens Polytron TOP

Keypad

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

SPDI

Siemens 37-pin Data Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Polytron TOP rel. VD07E Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side to coax-to-RJ-connector pinout

RJ connector side viewed as you would insert the RJ plug into your mouth, with the click up

central extern pin shield Very Middl left e right !!!! !!!! ! !

Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input, Direct Conn,Config.Add, Digital,Qual=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) Author: [email protected], Edition: November ´04

23

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n

n

Media Info: Media=11x14in, 4096x3232, 3134, (Blue) Media Info: Media=8x10in, 2304x2900, 2802, (Blue) Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img Band=20, Max Band per Page=20, Max Img C ol=0 Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 Formatting: Trim Width Enabled=0, Trim Width Disabled=0 Formatting: Pixel Pitch=12.5 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination= KELP 1120, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape

1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: November ´04

24

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)

Keypad Siemens Polytron TOP

SPDI

Kpad / Host Control Octopus Adaptor Cable

3M 87

yView 00 D r

Fiber Cable Siemens 37-pin Data Cable

RS422 37-to-50 pin Digital Adaptor Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Polytron TOP rel. VD07E Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side to coax-to-RJ-connector pinout

RJ connector side viewed as you would insert the RJ plug into your mouth, with the click up

central extern pin shield Very Middl left e right !!!! !!!! ! !

Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input, Direct Conn,Config.Add, Digital,Qual=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: Author: [email protected], Edition: November ´04

25

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: General: Log.Name=8700 General: Database Name=8700, Model=8700, Memory=32 Media Info: Media=35x43cm, 4096x5223, 5133, Blue Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination= 8700, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=10 Image Dmax=2.90, Border=Black, Collation=Off, Auto Print=On TFT/ULUT= Siepoly.w87, Auto Study=Off, Console=On, Annotation=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: November ´04

26

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

Siemens Polytron TOP with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER Siemens Coaxial VideoCable for Footswitch

Siemens Polytron TOP

SPDI

Coaxial-to-RJ-connector Footswitch Adaptor Cable RS422 9-pole Plug

Kpad / Host Control Octopus Adaptor Cable COPCIL Board Copper Cable

Keypad Siemens 37-pin Data Cable

Control 9-pin

RS422 37-to-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: Polytron TOP rel. VD07E Requirements: MIM200 v6.1, 8100 v2.4.1 Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side to coax-to-RJ-connector pinout

RJ connector side viewed as you would insert the RJ plug into your mouth, with the click up

central extern pin shield Very Middl left e right !!!! !!!! ! !

Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Conf.Add, Dig.,Qual.=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

Author: [email protected], Edition: November ´04

27

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products

n n n n n n n n

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination= 8100, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=10 Image Dmax=2.90, Border=Black, Collation=Off, Auto Print=On TFT/ULUT= Siepoly.w87, Auto Study=Off, Console=On, Annotation=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: November ´04

28

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products

Setup for Siemens Mammography Digiscan M with LASER IMAGERS (old Siemens modality, no more in production) Siemens Digiscan M (Acquisition Console) Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGER (see also 8600) .................................................................................................................. 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGER (see also 8600) (1) ............................................................................................................. 4 n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 6

1

Setup valid also for Kodak PACS LINK 25 PRINT SERVER.

Author: [email protected], Edition: November ´04

1

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products

Siemens Digiscan M (Acquisition Console) via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Mammomat 3000 Nova Digiscan M CR-reader syngo platform Operator Console

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Digiscan M syngo platform VC20B Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by syngo, linear-in-Density LUT into Camera Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=PL9410, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8610, Host Sel.=PL9410, AE Title=9410, Port=1024 press button Save and then press button Verification step 3: HC Device=k8610, Type=DICOM Printer, Class=kodak8610, DICOM Node= dv8610, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5024x6200, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6200x5024, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome, Background=black, Transformation=no magnification, press button Save - on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case setup used Dmax=350, C=6, Modality Group=1 9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5

Author: [email protected], Edition: November ´04

2

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=6 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N -Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=90, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=6, Border Density=0 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Linear OD, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

3

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products

Siemens Digiscan M (Acquisition Console) via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Mammomat 3000 Nova Digiscan M CR-reader syngo platform Operator Console

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Digiscan M syngo platform VC20B Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by syngo, linear-in-Density LUT into Camera Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=MIM, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8610, Host Sel.=MIM, AE Title=8610, Port=5040 press button Save and then press button Ve rification step 3: HC Device=k8610, Type=DICOM Printer, Class=kodak8610, DICOM Node= dv8610, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5024x6200, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6200x5024, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome, Background=black, Transformation=no magnification, press button Save - on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case setup used Dmax=350, C=1, Modality Group=1 MIM200 Setup: n on Configure, Network:

Author: [email protected], Edition: November ´04

4

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Node Name=MIM, IPAddr=accordingly Subnet Mask=accordingly, Gateway Addr=accordingly on Configure, Input, Network, Add: Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: General: Log.Name=8610 (or 8600) General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 Media Info: Media=8x10in, 5025x6200, 6020, Blue Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=25.8065 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Minify/Scale=On, Crop=Off, Source ID=digm Print Priority=Normal (Always=N), Border=Black (Always=N) Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) Negotiate Color Print=Off

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care

Author: [email protected], Edition: November ´04

5

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

6

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products

Siemens Digiscan M (Acquisition Console) via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory DICOM Network

Siemens Mammomat 3000 Nova Digiscan M CR-reader syngo platform Operator Console

Kodak DryView 8900

Requirements: Digiscan M syngo platform VC20B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=8900, Type=DICOM Printer, Class= kodak8900HiRes_smallB (or kodak8610), DICOM Node= k8900, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5056x6368, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6368x5056, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome, Background=black, Transformation=no magnification, press button Save - on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case setup used Dmax=350, C=1, TFT=Wrkstn2a 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr= accordingly n on Configuration, System, Software License: n License Status=Mammo Key is ON on Configuration, DICOM SCP, Communications: n n Port=5040, Association Limit=12, Source Name=DICOM Author: [email protected], Edition: November ´04

7

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws

Author: [email protected], Edition: November ´04

8

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products

Setup for Siemens Mammography MagicView 1000 with LASER IMAGERS (old Siemens modality, no more in production) Siemens MagicView 1000 (Review Console) Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGER (see also 8600) .................................................................................................................. 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGER (see also 8600) .................................................................................................................. 5 n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 8

Author: [email protected], Edition: November ´04

1

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products

Siemens MagicView 1000 (Review Console) via DIC OM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Mammomat 3000 Nova MagicView 1000 platform Review Console

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: MagicView 1000 rel.VB33 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup (using 8600 Config.File): - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8610 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8600_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8600_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Segment Type=anatomical, Scale=ON To eliminate white bands on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Background R=0, G=0, B=0 MagicView Setup to print images with Dmax=350:

Author: [email protected], Edition: November ´04

2

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products -

into Service Login (at Unix level), edit density.dat file and set 350 Dmax value for digital-mammo images ie cd /home/cs_root/data/lut vi density.dat change the following 6 lines as follows: 0 DX 350 0 CR 350 0 MG 350 0 CT 350 (this line needed when Ref.Test Patterns eg SMPTE are used) 0 OT 350 0 DEFAULT 350 reboot MagicView

MagicView Setup to print with Image Data lutted by MV, not lutted by 8610 (setup: Gamma=Lin.in Density, C=6, Modality Group=1): - into Service Login (at Unix level), edit LUT^CR.def file and modify it with following exp / density value pairs ie cd /home/cs_root/data/lut vi LUT^CR.def change the lines as follows: 0 20 25 31 51 42 76 56 102 73 127 93 153 115 178 143 204 182 229 230 255 300 copy LUT^CR.def file into the LUT^CT.def, LUT^MG.def and LUT^DX.def files (ie LUT^CR.def is the file with LUT applied by MV to image data and is copied into LUT^CT.def, LUT^MG.def and LUT^DX.def to be sure to have same LUT applied by MV to image data no matter which Modality-tag have the image data) ie cd /home/cs_root/data/lut cp LUT^CR.def LUT^CT.def (needed when Ref. Test Patterns eg SMPTE used) cp LUT^CR.def LUT^MG.def cp LUT^CR.def LUT^DX.def reboot MagicView

Author: [email protected], Edition: November ´04

3

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products 9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr= accordingly n SCP=8610, Copies=1, Contrast Table=6 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N -Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 on LOCAL PRINTER Menu: n n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=6, Border Density=0 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma=Linear OD, Image Size=Scale To Fit, Detector Size= don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

4

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products

Siemens MagicView 1000 (Review Console) via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Mammomat 3000 Nova MagicView 1000 platform Review Console

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: MagicView 1000 rel.VB33 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup (using 8600 Config.File): - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8610 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8600_Dicom, - DICOM services=PRINT_SCP, aet=8610, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8600_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Segment Type=anatomical, Scale=ON To eliminate white bands on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Background R=0, G=0, B=0 MagicView Setup to print images with Dmax=350:

Author: [email protected], Edition: November ´04

5

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products -

into Service Login (at Unix level), edit density.dat file and set 350 Dmax value for digital-mammo images ie cd /home/cs_root/data/lut vi density.dat change the following 6 lines as follows: 1 DX 350 1 CR 350 1 MG 350 1 CT 350 (this line needed when Ref.Test Patterns eg SMPTE are used) 0 OT 350 0 DEFAULT 350 reboot MagicView

MagicView Setup to print with Image Data lutted by MV, not lutted by 8610 (setup: Gamma=Lin.in Density, C=6, Modality Group=1): - into Service Login (at Unix level), edit LUT^CR.def file and modify it with following exp / density value pairs ie cd /home/cs_root/data/lut vi LUT^CR.def change the lines as follows: 1 20 26 31 52 42 77 56 103 73 128 93 154 115 179 143 205 182 230 230 255 300 copy LUT^CR.def file into the LUT^CT.def, LUT^MG.def and LUT^DX.def files (ie LUT^CR.def is the file with LUT applied by MV to image data and is copied into LUT^CT.def, LUT^MG.def and LUT^DX.def to be sure to have same LUT applied by MV to image data no matter which Modality-tag have the image data) ie cd /home/cs_root/data/lut cp LUT^CR.def LUT^CT.def (needed when Ref. Test Patterns eg SMPTE used) cp LUT^CR.def LUT^MG.def cp LUT^CR.def LUT^DX.def reboot MagicView MIM200 Setup:

Author: [email protected], Edition: November ´04

6

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600),Header/Line,Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=nova n Print Priority=Normal (Always=N), Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P

Author: [email protected], Edition: November ´04

7

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

8

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products

Siemens MagicView 1000 (Review Console) via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory DICOM Network

Siemens Mammomat 3000 Nova MagicView 1000 platform Review Console

Kodak DryView 8900

Requirements: MagicView 1000 rel.VB33 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) MagicView Setup (using 3M M969 HQ Config.file, easier configuration): - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_M969_HQ_Dicom, - DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_M969_HQ_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView - note: into 8900 Config., DICOM SCP, SCP Services, set Smoothing=0 (Always=Y) MagicView Setup (creating 8900 by modifying files, only if True Size needed): - into Service Login (at Unix level) in /home/cs_root/data/camera directory dbp_format.dat and dbp_camera_types.dat files needs to be edited by adding the DV8900 matrixes ie cd /home/cs_root/data/camera vi dbp_format.dat add the following lines: Kodak_DryView_8900_Hires_Dicom 14x17 350.75x427.03 8976x10928 650 Kodak_DryView_8900_Hires_Dicom 14x14 350.75x350.75 8976x8976 650 Kodak_DryView_8900_Hires_Dicom 11x14 274.63x350.75 7028x8976 650 Kodak_DryView_8900_Hires_Dicom 10x12 248.84x299.17 6368x7656 650 Kodak_DryView_8900_Hires_Dicom 8x10 197.57x248.84 5056x6368 650

Author: [email protected], Edition: November ´04

9

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products cd /home/cs_root/data/camera vi dbp_camera_types.dat add the following line: Kodak_DryView_8900_ Hires_Dicom -

reboot MagicView

-

into Service Login (at Unix level), logged as sit install from main menu do: edit/config/create (ie to configure the DICOM printer as separate node) node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, modality type=DICOM_PRINTER, camera type=Kodak_DryView_8900_ Hires_Dicom, DICOM services=PRINT_ SCP, aet=8900, port=5040, IPaddr=accordingly RETURN, exit, exit (ie in order to return to main menu) from main menu do: install/net exit (ie in order to return to main menu) and reboot MagicView from main menu do: hc_install/install devices/install (ie to select the printer) enter nbr of printer to install eg 1=kodakd Kodak_DryView_8900_ Hires_Dicom exit/exit (ie in order to return to main menu) and reboot MagicView at this point only a default-Layout ie printing format is available for 8900 other Layouts ie other printing formats could be manually genarated by using the Layout-Editor which is present inside MagicView application otherwise other Layouts ie other printing formats could be automatically generated deriving them from the Layouts of an already existing camera to automatic generate other Layouts ie other printing formats from main menu do: hc_install/modify/copy layouts input=Kodak_KELP_2180_Dicom output=Kodak_DryView_8900_ Hires_Dicom reboot MagicView

-

-

To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Segment Type=anatomical, Scale=ON To eliminate white bands on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Background R=0, G=0, B=0 MagicView Setup to print images with Dmax=350: - into Service Login (at Unix level), edit density.dat file and set 350 Dmax value for digital-mammo images ie cd /home/cs_root/data/lut vi density.dat change the following 6 lines as follows:

Author: [email protected], Edition: November ´04

10

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products 2 DX 350 2 CR 350 2 MG 350 2 CT 350 (this line needed when Ref.Test Patterns eg SMPTE are used) 0 OT 350 0 DEFAULT 350 reboot MagicView MagicView Setup to print with Image Data lutted by MV, not lutted by 8900 (setup: C=1, TFT=Wrkstn2a): - into Service Login (at Unix level), edit LUT^CR.def file and modify it with following exp / density value pairs ie cd /home/cs_root/data/lut vi LUT^CR.def change the lines as follows: 2 20 27 31 53 42 78 56 104 73 129 93 155 115 180 143 206 182 231 230 255 300 copy LUT^CR.def file into LUT^CT.def, LUT^MG.def and LUT^DX.def files (ie LUT^CR.def is the file with LUT applied by MV to image data and is copied into LUT^CT.def, LUT^MG.def and LUT^DX.def to be sure to have same LUT applied by MV to image data no matter which Modality-tag have the image data) ie cd /home/cs_root/data/lut cp LUT^CR.def LUT^CT.def (needed when Ref. Test Patterns eg SMPTE used) cp LUT^CR.def LUT^MG.def cp LUT^CR.def LUT^DX.def reboot MagicView 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr= accordingly n on Configuration, System, Software License: n License Status=Mammo Key is ON on Configuration, DICOM SCP, Communications: n

Author: [email protected], Edition: November ´04

11

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws

Author: [email protected], Edition: November ´04

12

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products

Setup for Siemens Mammography Novation DR (Acquisition Console) DROC platform with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) .................................................................................................................. 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................. 4 n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 6

1

Setup valid also for Kodak PACS LINK 25 PRINT SERVER.

Author: [email protected], Edition: November ´04

1

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products

Novation DR (Acquisition Console) DROC platform via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Siemens mammography Mammomat Novation DR Acquisition WorkStation DROC platform

Control 9 pin COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Kodak DryView 8610

Requirements: Novation DROC platform MAMMODROC v3_0_0_15 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens DROC Setup: n Log as Service n into Service Tools under Service Shortcut menu select Add New Output Device n here Browse Directory ./installable/vdevices/output/laser_cameras n here Install the Kodak DV8610 laser imager connected via Kodak PL MIM200 n here select Return to updated Software Configuration Page n here click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit Kodak 8610 connected via MIM200 (aliased to Kodak DryView 8610) n ALIAS NAME=Kodak 8610, n EXPLICIT_INSTALL=TRUE, SERVER ACTIVE=FALSE n click Update n click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit the Kodak DV8610 connected via MIM200 (aliased to Kodak 8610) n here Edit configuration file /linx_mp/resources/installed/raw/ vdevdryview8610_001/dryview8610.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DRYVIEW, n device name (ie Aetitle)=9410,

Author: [email protected], Edition: November ´04

2

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

device address (ie IPaddr : Port)= eg 150.224.150.22:1024 request annotation SOP class=false, request print job SOP class=false, print job poll period=15, print job timeout=300, printer poll period=15, association timeout=0, collate=false, custom lut file= photometric interpr.=automatic, copies=1, medium type=BLUE FILM, film destination=PROCESSOR, film session label=DROC film, memory allocation=0, Print priority=MED, available image display formats=PORTRAIT\1,1 image display format=PORTRAIT\1,1, annotation display format id=6 number of annotation boxes=6, annotation boxes per text line=3 max annotation box text string size=64, annotation string= max text line size=189, number of image text lines=5, image text position=left image text overlap=overwrite, image text reorient=reorient_0 film size id=8INX10IN, film magnification type=REPLICATE, film smoothing type=NONE, border density=BLACK, empty image density=BLACK, full pixel range=true, min density=20, max density=350, configuration info= LUT=0,5, trim=NO, polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC image mag.type= REPLICATE, image smoothing type= NONE, true size capable=true, pixel size=70, pad=false, image text line 1 till 5= annotation position=1 till 6, text string=, width=2781, height=3430 click Update, click Return to Updated Installation page, click on Service Tools (note if any parameter changed, click on Update and reboot DROC to be effective) Log as Application into Edit/Outputs/New input the output name Kodak DryView 8610, click OK select Kodak DryView 8610 and click Edit select laser_cameras tab, select Kodak 8610, click Add, click Accept, click OK to print select Admin/Spool Management/Patient and select Outputs=Kodak 8610

9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=5 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N -Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=90, Transfer Rate=2 MHz

Author: [email protected], Edition: November ´04

3

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=6, Border Density=0 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Linear OD, Image Size=Scale To Fit, Detector Size=don’t care on 8610 Service Menu into Configure User set: n n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

4

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products

Novation DR (Acquisition Console) DROC platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Siemens mammography Mammomat Novation DR Acquisition WorkStation DROC platform

Control 9 pin COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Kodak DryView 8610

Requirements: Novation DROC platform MAMMODROC v3_0_0_15 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens DROC Setup: n Log as Service n into Service Tools under Service Shortcut menu select Add New Output Device n here Browse Directory ./installable/vdevices/output/laser_cameras n here Install the Kodak DV8610 laser imager connected via Kodak PL MIM200 n here select Return to updated Software Configuration Page n here click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit Kodak 8610 connected via MIM200 (aliased to Kodak DryView 8610) n ALIAS NAME=Kodak 8610, n EXPLICIT_INSTALL=TRUE, SERVER ACTIVE=FALSE n click Update n click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit the Kodak DV8610 connected via MIM200 (aliased to Kodak 8610) n here Edit configuration file /linx_mp/resources/installed/raw/ vdevdryview8610_001/dryview8610.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DRYVIEW, n device name (ie Aetitle)=8610, Author: [email protected], Edition: November ´04

5

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

device address (ie IPaddr : Port)= eg 150.224.150.22:5040 request annotation SOP class=false, request print job SOP class=false, print job poll period=15, print job timeout=300, printer poll period=15, association timeout=0, collate=false, custom lut file= photometric interpr.=automatic, copies=1, medium type=BLUE FILM, film destination=PROCESSOR, film session label=DROC film, memory allocation=0, Print priority=MED, available image display formats=PORTRAIT\1,1 image display format=PORTRAIT\1,1, annotation display format id=6 number of annotation boxes=6, annotation boxes per text line=3 max annotation box text string size=64, annotation string= max text line size=189, number of image text lines=5, image text position=left image text overlap=overwrite, image text reorient=reorient_0 film size id=8INX10IN, film magnification type=REPLICATE, film smoothing type=NONE, border density=BLACK, empty image density=BLACK, full pixel range=true, min density=20, max density=350, configuration info= LUT=0,5, trim=NO, polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC image mag.type= REPLICATE, image smoothing type= NONE, true size capable=true, pixel size=70, pad=false, image text line 1 till 5= annotation position=1 till 6, text string=, width=2781, height=3430 click Update, click Return to Updated Installation page, click on Service Tools (note if any parameter changed, click on Update and reboot DROC to be effective) Log as Application into Edit/Outputs/New input the output name Kodak DryView 8610, click OK select Kodak DryView 8610 and click Edit select laser_cameras tab, select Kodak 8610, click Add, click Accept, click OK to print select Admin/Spool Management/Patient and select Outputs=Kodak 8610

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Author: [email protected], Edition: November ´04

6

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n

Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=25.8065 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) Contrast (dry)=5 (Always=N) Modality Group=1 (which corresponds to TFT/ULUT=upmsv3kp.w8u) Conv.Group=1, Gamma Table=Linear in Density Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Minify/Scale=On, Crop=Off, Source ID=droc Print Priority=Normal (Always=N), Border=3.99 (Always=N) Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) Negotiate Color Print=Off

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

7

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products

Novation DR (Acquisition Console) DROC platform via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory DICOM Network

Siemens mammography Mammomat Novation DR Acquisition WorkStation DROC platform

Kodak DryView 8900

Requirements: Novation DROC platform MAMMODROC v3_0_0_15 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens DROC Setup: n Log as Service n into Service Tools under Service Shortcut menu select Add New Output Device n here Browse Directory ./installable/vdevices/output/laser_cameras n here Install the Kodak DV8610 laser imager connected via Kodak PL MIM200 n here select Return to updated Software Configuration Page n here click on Service Tools n into Servic e Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit Kodak 8610 connected via MIM200 (aliased to Kodak DryView 8610) n ALIAS NAME=Kodak 8900, n EXPLICIT_INSTALL=TRUE, SERVER ACTIVE=FALSE n click Update n click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit the Kodak DV8610 connected via MIM200 (aliased to Kodak 8900) n here Edit configuration file /linx_mp/resources/installed/raw/ vdevdryview8610_001/dryview8610.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DRYVIEW, n device name (ie Aetitle)=8900, n device address (ie IPaddr : Port)= eg 150.224.150.22:5040 n request annotation SOP class=false, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file=

Author: [email protected], Edition: November ´04

8

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n

photometric interpr.=automatic, copies=1, medium type=BLUE FILM, film destination=PROCESSOR, film session label=DROC film, memory allocation=0, Print priority=MED, available image display formats=PORTRAIT\1,1 image display format=PORTRAIT\1,1, annotation display format id=6 number of annotation boxes=6, annotation boxes per text line=3 max annotation box text string size=64, annotation string= max text line size=189, number of image text lines=5, image text position=left image text overlap=overwrite, image text reorient=reorient_0 film size id=automatic, film magnification type=REPLICATE, film smoothing type=NONE, border density=BLACK, empty image density=BLACK, full pixel range=true, min density=20, max density=350, trim=NO, configuration info=LUT=Wrkstn2a.w87,1 polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC image mag.type= REPLICATE, image smoothing type= NONE, true size capable=true, pixel size=70, pad=false, image text line 1 till 5= annotation position=1 till 6, text string=, width=3337, height=4114 click Update, click Return to Updated Installation page, click on Service Tools (note if any parameter changed, click on Update and reboot DROC to be effective) Log as Application into Edit/Outputs/New input the output name Kodak DryView 8900, click OK select Kodak DryView 8900 and click Edit select laser_cameras tab, select Kodak 8900, click Add, click Accept, click OK to print select Admin/Spool Management/Patient and select Outputs=Kodak 8900

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly on Configuration, System, Software License: n n License Status=Mammo Key is ON n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On

Author: [email protected], Edition: November ´04

9

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n

Formatting: Req.Size Mix Row=On, Trim=On, Formatting: True Landscape=On, Rotation=On Formatting: Minify/Crop=On, Tonescaling on Image Basis=On Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 Formatting: Min Vert Sep=4, Trim Width Enabled=4 Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: Negotiate Presentation LUT=No, Negotiate Color Print=No TFT=Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) Smoothing Type=15 (Always=N), Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) NeventReports=No (Always=Y), Warnings=Yes Print Priority=Normal (Always=N), Border=3.99 (Always=N) 2mm Border=Yes, Film Clip Border=No, Film Base=Mammo Blue Film (Always=Y) Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No Modality ID=No, Annotation Override=No, Density Patch=No Image Resizing=Minify/Scale (Always=N), Text Box Location=None, Source ID=ws

Author: [email protected], Edition: November ´04

10

Siemens Mammography Novation DR Women’s Health Acquisition WorkStation with LASER IMAGER Products

Setup for Siemens Mammography Novation DR (Acquisition Console) WH-AWS syngo platform with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGER (see also 8600) .................................................................................................................. 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGER (see also 8600) (1) ............................................................................................................. 4 n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 6

1

Setup valid also for Kodak PACS LINK 25 PRINT SERVER.

Author: [email protected], Edition: November ´04

1

Siemens Mammography Novation DR Women’s Health Acquisition WorkStation with LASER IMAGER Products

Novation DR Women’s Health Acquisition WorkStation via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens mammography Mammomat Novation DR Women’s Health Acquisition WorkStation syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: WH-AWS VA10A Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=PL9410, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8610, Host Sel.=PL9410, AE Title=9410, Port=1024 press button Save and then press button Verification step 3: HC Device=k8610, Type=DICOM Printer, Class=kodak8610, DICOM Node= dv8610, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5024x6200, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6200x5024, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome, Background=black, Transformation=no magnification, press button Save - on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera 9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=6

Author: [email protected], Edition: November ´04

2

Siemens Mammography Novation DR Women’s Health Acquisition WorkStation with LASER IMAGER Products n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N -Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 on LOCAL PRINTER Menu: n n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=90, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=6, Border Density=0 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Linear OD, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

3

Siemens Mammography Novation DR Women’s Health Acquisition WorkStation with LASER IMAGER Products

Novation DR Women’s Health Acquisition WorkStation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens mammography Mammomat Novation DR Women’s Health Acquisition WorkStation syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: WH-AWS VA10A Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=MIM, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8610, Host Sel.=MIM, AE Title=8610, Port=5040 press button Save and then press button Ve rification step 3: HC Device=k8610, Type=DICOM Printer, Class=kodak8610, DICOM Node= dv8610, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5024x6200, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6200x5024, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome, Background=black, Transformation=no magnification, press button Save - on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Author: [email protected], Edition: November ´04

4

Siemens Mammography Novation DR Women’s Health Acquisition WorkStation with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: General: Log.Name=8610 (or 8600) General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 Media Info: Media=8x10in, 5025x6200, 6020, Blue Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=25.8065 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Minify/Scale=On, Crop=Off, Source ID=ws Print Priority=Normal (Always=N), Border=3.99 (Always=N) Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) Negotiate Color Print=Off

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

5

Siemens Mammography Novation DR Women’s Health Acquisition WorkStation with LASER IMAGER Products

Novation DR Women’s Health Acquisition WorkStation via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory DICOM Network

Siemens mammography Mammomat Novation DR Women’s Health Acquisition WorkStation syngo platform

Kodak DryView 8900

Requirements: WH-AWS VA10A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=8900, Type=DICOM Printer, Class= kodak8900HiRes_smallB (or kodak8610), DICOM Node= k8900, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5056x6368, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6368x5056, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome , Background=black, Transformation=no magnification, press button Save - on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, System, Software License: n License Status=Mammo Key is ON n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: Author: [email protected], Edition: November ´04

6

Siemens Mammography Novation DR Women’s Health Acquisition WorkStation with LASER IMAGER Products n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=5 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws

Author: [email protected], Edition: November ´04

7

Siemens Mammography Opdima with LASER IMAGER Products

Setup for Siemens Mammography Opdima with LASER IMAGERS (old Siemens modality, no more in production)

Siemens Opdima Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) .................................................................................................................. 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................. 4 n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 6

1

Setup valid also for Kodak PACS LINK 25 PRINT SERVER.

Author: [email protected], Edition: November ´04

1

Siemens Mammography Opdima with LASER IMAGER Products

Siemens Opdima via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Opdima workstation

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Opdima v3.1 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data not lutted by Opdima, lutted by Camera Siemens Opdima Setup: - under Service/Advanced Service/Network Setup/DICOM Nodes/Add: - Node Name=Kodak, AEtitle=9410, Host Name=9410MFG01, - IPaddr=accordingly, Port=1024, Printer=selected 9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=3 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=6, Kernel Group=1 n Interceptor=Yes, N -Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 on LOCAL PRINTER Menu: n n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831

Author: [email protected], Edition: November ´04

2

Siemens Mammography Opdima with LASER IMAGER Products n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=3, Border Density=0 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) on 8610 Operator Menu into Configure User set: n n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

3

Siemens Mammography Opdima with LASER IMAGER Products

Siemens Opdima via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Opdima workstation

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Opdima v3.1 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data not lutted by Opdima, lutted by Camera Siemens Opdima Setup: - under Service/Advanced Service/Network Setup/DICOM Nodes/Add: - Node Name=Kodak, AEtitle=8610, Host Name=MIM, - IPaddr=accordingly, Port=5040, Printer=selected MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On

Author: [email protected], Edition: November ´04

4

Siemens Mammography Opdima with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n

Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=25.8065 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) Contrast (dry)=3 (Always=N) Modality Group=6 (which corresponds to TFT/ULUT=gsdfaa0p.w8u) Conv.Group=1, Gamma Table=Linear in Transmittance Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Minify/Scale=On, Crop=Off, Source ID=ws Print Priority=Normal (Always=N), Border=3.99 (Always=N) Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) Negotiate Color Print=Off

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1 n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

5

Siemens Mammography Opdima with LASER IMAGER Products

Siemens Opdima via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory DICOM Network

Siemens Opdima workstation

Kodak DryView 8900

Requirements: Opdima v3.1 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by Opdima, lutted by Camera Siemens Opdima Setup: - under Service/Advanced Service/Network Setup/DICOM Nodes/Add: - Node Name=Kodak, AEtitle=8900, Host Name=DV8900, - IPaddr=accordingly, Port=5040, Printer=selected 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly on Configuration, System, Software License: n n License Status=Mammo Key is ON n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On,

Author: [email protected], Edition: November ´04

6

Siemens Mammography Opdima with LASER IMAGER Products n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=gsdfaa0p.w8u (Always=N), Contrast=3 (Always=N) n Smoothing Type=15 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws

Author: [email protected], Edition: November ´04

7

Siemens Mammography Mammo Report Plus (Review Console) with LASER IMAGER Products

Setup for Siemens Mammography Mammo Report Plus with LASER IMAGERS Siemens Mammo Report Plus (Review Console) Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) .................................................................................................................. 2 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................. 4 n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 6

1

Setup valid also for Kodak PACS LINK 25 PRINT SERVER.

Author: [email protected], Edition: November ´04

1

Siemens Mammography Mammo Report Plus (Review Console) with LASER IMAGER Products

Siemens Mammo Report Plus (Review Console) via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Mammomat 3000 Nova Mammo Report Plus Review Console

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Mammo Report Plus VA20 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: in sw VA20 Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens Mammo Report Plus Setup: - login as Service - into Administration / DICOM / Setup / DICOM Setup set: - Entity Type: Printer=On, AEtitle=9410, IPaddr=accordingly, Port=1024 - into Administration / DICOM / Printer set: - Printer Name=Kodak 8610, Dmax=350 - Printer Setup: Config.Info=LUT=0,5 - Portrait matrix (Columns x Rows)=5024 x 6200 - Landscape matrix (Columns x Rows)=6200 x 5024 - Graylevel 16(12)=On (Off if 8600), 8=Off (On if 8600) - Medium=Blue Film, Medium Size=8INX10IN 9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr= accordingly n SCP=8610, Copies=1, Contrast Table=5 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N -Event-Print Job=Yes, N-Event Printer=No

Author: [email protected], Edition: November ´04

2

Siemens Mammography Mammo Report Plus (Review Console) with LASER IMAGER Products n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 on LOCAL PRINTER Menu: n n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=6, Border Density=0 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma Table= Xmittance, Image Size=Scale To Fit n Detector Size= don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

3

Siemens Mammography Mammo Report Plus (Review Console) with LASER IMAGER Products

Siemens Mammo Report Plus (Review Console) via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Mammomat 3000 Nova Mammo Report Plus Review Console

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Mammo Report Plus VA20 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: in sw VA20 Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens Mammo Report Plus Setup: - login as Service - into Administration / DICOM / Setup / DICOM Setup set: - Entity Type: Printer=On, AEtitle=8610, IPaddr=accordingly, Port=5040 - into Administration / DICOM / Printer set: - Printer Name=Kodak 8610, Dmax=350 - Printer Setup: Config.Info=LUT=0,5 - Portrait matrix (Columns x Rows)=5024 x 6200 - Landscape matrix (Columns x Rows)=6200 x 5024 - Graylevel 16(12)=On (Off if 8600), 8=Off (On if 8600) - Medium=Blue Film, Medium Size=8INX10IN MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue Author: [email protected], Edition: November ´04

4

Siemens Mammography Mammo Report Plus (Review Console) with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=25.8065 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y), Contrast (dry)=5 (Always=N), Modality Group=1 (which corresponds to TFT/ULUT=upmsv3kp.w8u), Conv.Group=1, Gamma Table= Linear in Density Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Minify/Scale=On, Crop=Off, Source ID=rplus Print Priority=Normal (Always=N), Border=3.99 (Always=N) Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) Negotiate Color Print=Off

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) on 8610 Operator Menu into Configure User set: n n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Xmittance, Image Size=Scale To Fit, Detector Size= don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: November ´04

5

Siemens Mammography Mammo Report Plus (Review Console) with LASER IMAGER Products

Siemens Mammo Report Plus (Review Console) via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory DICOM Network

Siemens Mammomat 3000 Nova Mammo Report Plus Review Console

Kodak DryView 8900

Requirements: Mammo Report Plus VA20 Requirements: 8900 rev.E ie release 2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: in sw VA20 Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens Mammo Report Plus Setup: - login as Service - into Administration / DICOM / Setup / DICOM Setup set: - Entity Type: Printer=On, AEtitle=8900, IPaddr=accordingly, Port=5040 - into Administration / DICOM / Printer set: - Printer Name=Kodak 8900, Dmax=350 - Printer Setup: Config.Info= LUT=Wrkstn2a.w87,1 - Printer Setup: Portrait matrix (Columns x Rows)=5056 x 6368 (for 8x10) - Printer Setup: Landscape matrix (Columns x Rows)=6368 x 5056 (for 8x10) - Printer Setup: Medium=Blue Film, Medium Size=8INx10IN - Printer Setup: Graylevel 16(12)=On, 8=Off - Printer Setup: Portrait matrix (Columns x Rows)=6368 x 7656 (for 10x12) - Printer Setup: Landscape matrix (Columns x Rows)=7656 x 6368 (for 10x12) - Printer Setup: Medium=Blue Film, Medium Size=10INx12IN 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr= accordingly n on Configuration, System, Software License: n License Status=Mammo Key is ON n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any Author: [email protected], Edition: November ´04

6

Siemens Mammography Mammo Report Plus (Review Console) with LASER IMAGER Products n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws

Author: [email protected], Edition: November ´04

7

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

Setup for Siemens MR Harmony / Symphony / Sonata / Rhapsody / Concerto / Trio / Allegra / Avanto / Espree with LASER IMAGERS Important note: from mid 2000 MR models Harmony/Symphony/Sonata switched to the Numaris 4 syngo-based platform. Here you find Harmony/Symphony/Sonata syngo-based setup Connection via DICOM:

n Kodak DryView 8300 LASER IMAGER..................................................................................... n Kodak Digital Science 190 MEDICAL LASER PRINTER .................................................... n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / n n n n n n n n n n n n

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1)............. Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1)................................................................................ Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1)................................................................................ Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ............................................................................. Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .......................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .......................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)............................................................................ Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4,5) ......... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5)....................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5)....................................................................... Kodak DryView 8900 LASER IMAGER..................................................................................... Kodak DryView 8150 LASER IMAGER..................................................................................... Kodak Color Medical Imager 1000.............................................................................................

2 3 4 6 8 10 12 14 16 18 20 22 24 26 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER 2

Author: [email protected], Edition: May ´05

1

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

Kodak DryView 8300

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0 b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 10 or b) 1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=a) 0 or b) 4

Author: [email protected], Edition: May ´05

2

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

Kodak 190 camera

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, Curve Shape=3.0, Film Contrast=0 (use this config. in case also a Virtuoso workstation is printing on same camera) b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=a) 3.0 or b) 0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

Fiber Cable yView 00 Dr 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and if HQ by installing HQ into syngo DICOM Camera Config.File. Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber Author: [email protected], Edition: May ´05

4

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n n n n n n n n n n n n n n

Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz Film Mismatch=Print Always, Interpolation Type=831 Interp Num=2, Max.Density=300, Contrast=6, Border=0 TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: SCU AETitle=accordingly, IPAddr=accordingly SCP=8700, Copies=1, Contrast Table=a) 9 or b) 2 TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link

Kodak DryView 8100

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

Author: [email protected], Edition: May ´05

6

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

n n n n n n n n n

on Device Setup, SCP PRINTERS, Current Providers: Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: SCU AETitle=accordingly, SCU IPAddr=accordingly SCP=8100, Copies=1, Contrast Table=a) 9 or b) 2 TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0 b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u

Author: [email protected], Edition: May ´05

8

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 10 or b) 1 n TFT/ULUT=a) u1_109b.w8u or b) wrkstn2a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

Crossed Network Cable

Kodak 160 camera

Kodak MIM 200

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, Curve Shape=434 (i.e., 3.0), Film Contrast=0 b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160

Author: [email protected], Edition: May ´05

10

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180

Author: [email protected], Edition: May ´05

12

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k1120, Host Sel.=k1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=k1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=k1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly

Author: [email protected], Edition: May ´05

14

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node=k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:

Author: [email protected], Edition: May ´05

16

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +9 or b) +2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into syngo DICOM Camera Config.File. Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 MIM200 Setup: n on Configure, Network:

Author: [email protected], Edition: May ´05

18

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: Author: [email protected], Edition: May ´05

20

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Control 9 pin Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto Numaris 4 syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Kodak DryView 8300

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0 b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:

Author: [email protected], Edition: May ´05

22

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) u1_109b.w8u or b) wrkstn2a.w8u (Always=Y) n Contrast (dry)=a) 10 or b) 1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto - Trio/Allegra/Avanto Numaris 4 syngo platform

Kodak DryView 8900

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:

Author: [email protected], Edition: May ´05

24

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 9 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mr

Author: [email protected], Edition: May ´05

25

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto - Trio/Allegra/Avanto Numaris 4 syngo platform

Kodak DryView 8150

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) in Local Service/Config/DICOM LUT files set MR Image=linear,MaxDens=3.0 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200), DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any

Author: [email protected], Edition: May ´05

26

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 9 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mr

Author: [email protected], Edition: May ´05

27

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products

MR based on syngo via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens MR - Harmony/Symphony/Sonata - Rhapsody/Concerto - Trio/Allegra/Avanto/Espree Numaris 4 syngo platform Kodak CMI 1000

Requirements: MREase VA21B and VA25D and VB11A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) in Local Service/Config/DICOM LUT files set MR Image=linear if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set MR Image=MR1 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000

Author: [email protected], Edition: May ´05

28

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products n n n n n n

n

n

Modality (SCU) Config (or after modality recognition): Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No Note: Color IQ settings used when images sent with Color DICOM SOP under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: under Image Quality, Grayscale Image Quality: n Contrast=a) 9 or b) 7 (Always=Y) n TFT Set (From list)=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens MR Jazz with LASER IMAGER Products

Setup for Siemens MR Jazz with LASER IMAGERS Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer.................................................. 3 n Kodak DryView 8700 LASER IMAGER / Plus............................................................... 4 n Kodak DryView 8700 LASER IMAGER / Standard ....................................................... 5 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer.................................................. 6 n Kodak DryView 8500 LASER IMAGER / Plus............................................................... 7 n Kodak DryView 8500 LASER IMAGER / Standard ....................................................... 8 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer.................................................. 9 n Kodak DryView 8300 LASER IMAGER / Standalone.................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (not ok, image transfer incompatibility) n Kodak PACS LINK 9410 ACQUISITION SYSTEM / Kodak DryView 8100 LASER IMAGER (not ok, image transfer incompatibility) n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 15 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 17 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) . 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4).................................................................... 23

Author: [email protected], Edition: May ´05

1

Siemens MR Jazz with LASER IMAGER Products

Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 25 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 26 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 27 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 29 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 31 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 33 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 35 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 37 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 39 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 41 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 43 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 45 n Kodak DryView 8900 LASER IMAGER......................................................................... 47 n Kodak DryView 8150 LASER IMAGER......................................................................... 49 n Kodak Color Medical Imager 1000 ................................................................................. 51

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

2

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer Keypad

Keypad

Siemens Magnetom Jazz MR

UKEIB Data Cable 37-pin Digital Board Data output

DEIB Fiber Cable Fiber Cable er anag tM npu ulti-I 0M 880 3M

View 00 Dry 3M 87

Fiber Cable 8700 Dual

8800 MIM

Requirements: Magnetom Jazz rel. VA12A, 8800 rel. 5.1, 8700 rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8700 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

3

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8700 LASER IMAGER / Plus Keypad

Siemens Magnetom Jazz MR

Keypad

UKEIB Data Cable 37-pin Digital Board Data output

DEIB Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8700 Plus

Requirements: Siemens Magnetom Jazz rel. VA12A, 8700 Plus rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

4

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8700 LASER IMAGER / Standard Keypad Siemens Magnetom Jazz MR

Data Cable 37-pin Digital Board Data output iew 00 DryV 3M 87

8700 Standard

Requirements: Siemens Magnetom Jazz rel. VA12A, 8700 Standard rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad 8700 Standard Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

5

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer Keypad

Keypad

Siemens Magnetom Jazz MR

UKEIB Data Cable 37-pin Digital Board Data output

DEIB Fiber Cable Fiber Cable er anag tM npu ulti-I 0M 880 3M

View 00 Dry 3M 87

Fiber Cable 8500 Dual

8800 MIM

Requirements: Magnetom Jazz rel. VA12A, 8800 rel. 5.1, 8500 rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8500 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

6

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8500 LASER IMAGER / Plus Keypad

Siemens Magnetom Jazz MR

Keypad

UKEIB Data Cable 37-pin Digital Board Data output

DEIB Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8500 Plus

Requirements: Magnetom Jazz rel. VA12A, 8500 Plus rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

7

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8500 LASER IMAGER / Standard Keypad Siemens Magnetom Jazz MR

Data Cable 37-pin Digital Board Data output iew 00 DryV 3M 87

8500 Standard

Requirements: Magnetom Jazz rel. VA12A, 8500 Standard rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad 8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Left n on COMM Menu: 8700 Keypad Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

8

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer Keypad

Siemens Magnetom Jazz MR

Keypad

UKEIB Data Cable 37-pin Digital Board Data output

DEIB Fiber Cable Fiber Cable

DryView 8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

3M

880

put ulti-In 0M

Mana

ger

POEIB 8800 MIM

Requirements: Magnetom Jazz rel. VA12A, 8800 rel. 5.1, 8300 rel. 4.2 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial: Baud=1200, Data=8, Stop=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None, Modality Group=0 8800 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: Density=16, Contrast=10 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

9

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8300 LASER IMAGER / Standalone Keypad

Siemens Magnetom Jazz MR DryView 8300 Data Cable 37-pin Digital Board Data output

Requirements: n Siemens Magnetom Jazz MR rel. 5.4 n 8300 rel. 4.2 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16 n Contrast=10 n Sharp/Smooth=0 n on 8300 Service Menu into Configure User set: n Serial Control Interface: Protocol=Keypad n Digital Interface: Parity=Even (if error set to Disable) n Modality Group=0

Author: [email protected], Edition: May ´05

10

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak Digital Science 969 HQ LASER IMAGER Keypad

Siemens Magnetom Jazz MR

Keypad

UKEIB Data Cable 37-pin DEIB

Digital Board Data output

Fiber Cable Fiber Cable

3 M

H Q

L a se r Im ag e r

M969 HQ

Requirements: Magnetom Jazz rel. VA12A, M969 HQ rel. 5.1 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center M969 HQ Setup: n on COMM Menu: n 969 Default n on IMAGE Menu: n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu: n Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

11

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak Digital Science 969 HQT LASER IMAGER Keypad Siemens Magnetom Jazz MR

Data Cable 37-pin Digital Board Data output

3 M

H Q

L a s er Im a g e r

M969 HQT

Requirements: Magnetom Jazz rel. VA12A, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad M969 HQT Setup: n on TDB/C board: n Jumpers=RS422, Switch=Left n on COMM Menu: n 8700 Keypad Default n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n TFT=PMS, Contrast=15, Density=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

12

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak Digital Science 959 XL LASER IMAGER XL Keypad

Siemens Magnetom Jazz MR

Keypad

UKEIB Data Cable 37-pin DEIB

Digital Board Data output

Fiber Cable Fiber Cable

3 M L a ser I m ag er

M959 XL

Requirements: Siemens Magnetom Jazz rel. VA12A, M959 XL rel. 3.8 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu: 959 Default n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10

Author: [email protected], Edition: May ´05

13

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak DryView 8100 LASER IMAGER Keypad

Keypad

UKEIB Imager

Copper Cable RS422 9-pole Plug

Siemens MR Magnetom Jazz Data Cable 37-pin Digital Board Data OUT

DryView 8100

Requirements: Magnetom Jazz rel. VA12A, 8100 v1.1 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMSB n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Even (if error Disable)

Author: [email protected], Edition: May ´05

14

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Siemens MR Magnetom Jazz

Keypad

Kpad / Host Control Octopus Adaptor Cable Crossed Network Cable

Digital Board Data OUT

Data Cable 37-pin

Kodak 160 camera

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Magnetom Jazz rel. VA12A Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name= smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On

Author: [email protected], Edition: May ´05

15

Siemens MR Jazz with LASER IMAGER Products n n n n n n n n n n n n n n

Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination=KELI 160, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On Curve Shape=3.0, Auto Study=Off, Console=On at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=CurveShape

160 Setup:

no modality-specific setup needed

Author: [email protected], Edition: May ´05

16

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Siemens MR Magnetom Jazz

Keypad

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

Digital Board Data OUT

Data Cable 37-pin

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Magnetom Jazz rel. VA12A Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Author: [email protected], Edition: May ´05

17

Siemens MR Jazz with LASER IMAGER Products n n n n n n n n n n n n n n n

Formatting: True Landscape=On Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=2 Formatting: Pixel Pitch=12.6582 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination= KELP 2180, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On Curve Shape=3.0, Auto Study=Off, Console=On at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=CurveShape

2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

18

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER Siemens MR Magnetom Jazz

Keypad

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

Digital Board Data OUT

Data Cable 37-pin

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Magnetom Jazz rel. VA12A Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Author: [email protected], Edition: May ´05

19

Siemens MR Jazz with LASER IMAGER Products n n n n n n n n n n n n n n n

Formatting: True Landscape=On Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 Formatting: Trim Width Enabled=0, Trim Width Disabled=0 Formatting: Pixel Pitch=12.5 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: Select Destination= KELP 1120, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On Curve Shape=3.0, Auto Study=Off, Console=On at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=CurveShape

1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

20

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)

Keypad Siemens MR Magnetom Jazz

Digital Board Data OUT

Kpad / Host Control Octopus Adaptor Cable

yView 00 Dr 3M 87

Fiber Cable

Data Cable 37-pin

RS422 37-to-50 pin Digital Adaptor Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Magnetom Jazz rel. VA12A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On

Author: [email protected], Edition: May ´05

21

Siemens MR Jazz with LASER IMAGER Products n n n n n n n n n n n n n n n n

Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination= 8700, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

22

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Magnetom Jazz with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER Keypad Siemens MR Magnetom Jazz

Digital Board Data OUT

RS422 9-pole Plug

Kpad / Host Control Octopus Adaptor Cable COPCIL Board Copper Cable

Data Cable 37-pin

Control 9-pin

RS422 37-to-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: Magnetom Jazz rel. VA12A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On Author: [email protected], Edition: May ´05

23

Siemens MR Jazz with LASER IMAGER Products n n n n n n n n n n n n n n n

Formatting: True Landscape=On Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination= 8100, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On TFT/ULUT= Pmsb.w87, Auto Study=Off, Console=On, Annotation=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

24

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Jazz via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

DryView 8300 Siemens MR Magnetom Jazz

Requirements: n Siemens Magnetom Jazz platform Numaris Ortho rel. rel. VA13A (build 6.1F) n 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, Contrast=10, Modality Group=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=104, Printer AE title=8300 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=0, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,10, Trim=YES (is always yes) n in Menu: Help->Exposure set: Film Size=8x10, e.g., Division=6 (i.e., Format=6:1) n to acquire image on screen, press F9 or in Menu: Help->Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: n Modality Group=0

Author: [email protected], Edition: May ´05

25

Siemens MR Jazz with LASER IMAGER Products

Siemens MR Jazz via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens MR Magnetom Jazz

Kodak 190 camera

Requirements: Jazz MR platform Numaris Ortho rel. VA13A preliminary (build 6.1F) Requirements: 190 rel. 1.7.29 Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=k190, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=190 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=ANY n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=NORMAL, Border Density=BLACK n Empty img.density=BLACK, Max Density=300, Min Density=0 n Config.Information=CS435, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

26

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network DryView 8700 Plus

Siemens MR Magnetom Jazz

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

9410 PACS Link

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=1024, Printer AE title=9410 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film

Author: [email protected], Edition: May ´05

27

Siemens MR Jazz with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interp.Type=831, Interp.Num=2 n Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=E_MRI_SCANNER, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

28

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens MR Magnetom Jazz

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

9410 PACS Link DryView 8100

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 9410 v1.6, 8100 v2.4.1 Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=1024, Printer AE title=9410 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interp.Type=831, Interp Num=2 n Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: Author: [email protected], Edition: May ´05

29

Siemens MR Jazz with LASER IMAGER Products n n n n n n n

SCU AETitle=E_MRI_SCANNER, SCU IPAddr=accordingly SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 Max.Density=300, Border=0, Mag.Type=8, Smoothing=2 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=No, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

30

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens MR Magnetom Jazz

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, Contrast=10, Modality Group=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=1024, Printer AE title=9410 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=0, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,10, Trim=YES (is always yes) n in Menu: Help->Exposure set: Film Size=8x10, e.g., Division=6 (i.e., Format=6:1) n to acquire image on screen, press F9 or in Menu: Help->Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users:

Author: [email protected], Edition: May ´05

31

Siemens MR Jazz with LASER IMAGER Products n n n n n n n

SCU AETitle=E_MRI_SCANNER, SCU IPAddr=accordingly SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=No, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

32

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens MR Magnetom Jazz

Crossed Network Cable

Kodak 160 camera

Kodak MIM 200

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, KELI 160 v7.2 Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=k160, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=160 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=ANY n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=NORMAL, Border Density=BLACK n Empty img.density=BLACK, Max Density=300, Min Density=0 n Config.Information=CS435, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film

Author: [email protected], Edition: May ´05

33

Siemens MR Jazz with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 434 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

34

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens MR Magnetom Jazz

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=k2180, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=2180 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=ANY n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=NORMAL, Border Density=BLACK n Empty img.density=BLACK, Max Density=300, Min Density=0 n Config.Information=CS435, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film

Author: [email protected], Edition: May ´05

35

Siemens MR Jazz with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

36

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens MR Magnetom Jazz

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=k1120, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=1120 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=ANY n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=NORMAL, Border Density=BLACK n Empty img.density=BLACK, Max Density=300, Min Density=0 n Config.Information=CS435, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film

Author: [email protected], Edition: May ´05

37

Siemens MR Jazz with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

38

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens MR Magnetom Jazz

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=k8200, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=8200 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Empty img.density=BLACK, Max Density=300, Min Density=0 n Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

39

Siemens MR Jazz with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

40

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens MR Magnetom Jazz

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=8700 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film

Author: [email protected], Edition: May ´05

41

Siemens MR Jazz with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

42

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens MR Magnetom Jazz

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=8100 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue Author: [email protected], Edition: May ´05

43

Siemens MR Jazz with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=2 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

44

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens MR Magnetom Jazz

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, Contrast=10, Modality Group=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=8300 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=0, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,10, Trim=YES (is always yes) n in Menu: Help->Exposure set: Film Size=8x10, e.g., Division=6 (i.e., Format=6:1) n to acquire image on screen, press F9 or in Menu: Help->Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film

Author: [email protected], Edition: May ´05

45

Siemens MR Jazz with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

46

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens MR Magnetom Jazz

Kodak DryView 8900

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=8900 n in Help/Service/Options/PrinterOption set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Info=LUT=0,9, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any

Author: [email protected], Edition: May ´05

47

Siemens MR Jazz with LASER IMAGER Products n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Pmsv3k.w87 (Always=Y) n Contrast= 9 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=jazz

Author: [email protected], Edition: May ´05

48

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens MR Magnetom Jazz

Kodak DryView 8150

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=DV8150 n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Info=LUT=0,9, Trim=YES (is always yes) n in Help/Exposure set: Film Size=14x17, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On

Author: [email protected], Edition: May ´05

49

Siemens MR Jazz with LASER IMAGER Products n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mr

Author: [email protected], Edition: May ´05

50

Siemens MR Jazz with LASER IMAGER Products

MR Jazz via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens MR Magnetom Jazz

Kodak CMI 1000

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set: - Printer host name=CMI1000, Printer IP addr=accordingly - Printer TCP port=5040, Printer AE title=CMI1000 n in Help/Service/Options/Printer Option set (writing params with capital letters !): - Film Orientation=PORTRAIT, Medium Type=BLUE FILM - Film Destination=PROCESSOR, Magnification Type=CUBIC - Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK - Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes) n in Menu: Help->Exposure set: Film Size=8x10, eg Division=6 (ie Format=6:1) n to acquire image on screen, press F9 or in Menu: Help->Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:

Author: [email protected], Edition: May ´05

51

Siemens MR Jazz with LASER IMAGER Products n under Image Quality, Grayscale Image Quality: n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

52

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Setup Manual for Siemens MR Open / Vision / Impact with LASER IMAGERS Important note: from mid 2000 MR models Harmony/Symphony/Sonata switched to the Numaris 4 syngo based platform (see setup there). Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer.................................................. 3 n Kodak DryView 8700 LASER IMAGER / Plus............................................................... 4 n Kodak DryView 8700 LASER IMAGER / Standard ....................................................... 5 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer.................................................. 6 n Kodak DryView 8500 LASER IMAGER / Plus............................................................... 7 n Kodak DryView 8500 LASER IMAGER / Standard ....................................................... 8 n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer.................................................. 9 n Kodak DryView 8300 LASER IMAGER /Standalone..................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v 1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 15 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v 1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 17 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) .25 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4).................................................................... 27 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8900 LASER IMAGER ........................................................................ 29

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 31 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 32 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 33 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 35 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 37 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 39 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 41 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 43 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER(3,4,5)................................................................. 45 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 47 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 49 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 51 n Kodak DryView 8900 LASER IMAGER......................................................................... 53 n Kodak DryView 8150 LASER IMAGER......................................................................... 55 n Kodak Color Medical Imager 1000 ................................................................................. 57

Author: [email protected], Edition: May ´05

2

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

nput ulti-I 0M 880 3M

ger Mana

yView 00 Dr 3M 87

Fiber Cable 8700 Dual

8800 MIM

Requirements: SHPT rel. 1.3, 8800 rel. 4.2, 8700 rel. 1.15 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=XL, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on HOST Menu: Pixel Correct=Yes, Scale Format=Yes, Scale Magnif=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on EIB Menu: Parity=Disable, Timeout=50 Author: [email protected], Edition: May ´05

3

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8700 LASER IMAGER / Plus RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens MR

Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8700 Plus

Requirements: 8700 rel. 1.15 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters into Exposure->Job Controller: press Continue n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Plus Setup: n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Magnetom, Timeout=50, Smooth Beta=2, Sharp Beta=2 n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50

Author: [email protected], Edition: May ´05

4

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8700 LASER IMAGER / Standard 8700 Standard Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

SPCI iew 00 DryV 3M 87

Siemens 37-pin Data Cable SPDI

Requirements: 8700 rel. 1.15 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters into Exposure->Job Controller: press Continue Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Standard Setup: n on TDB/C board: Jumpers=RS232, Switch=Right n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Magnetom, Timeout=50, Smooth Beta=2, Sharp Beta=2 n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50

Author: [email protected], Edition: May ´05

5

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

Keypa d Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

er anag putM ulti-In 800M 3M8

View 00 Dry 3M 87

Fiber Cable 8500 Dual

8800 MIM

Requirements: SHPT rel. 1.3, 8800 rel. 5.1, 8500 rel. 1.22 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File HQ n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on EIB Menu: Parity=Disable, Timeout=50

Author: [email protected], Edition: May ´05

6

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8500 LASER IMAGER / Plus Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8500 Plus

Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File HQ n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Plus Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50

Author: [email protected], Edition: May ´05

7

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8500 LASER IMAGER / Standard Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

SPCI

Keypad Host

UKEIB I mager

SPDI 9-to-9-pin Copper Cable Siemens 37-pin Data Cable

yView 00 Dr 3M 87

8500 Standard

Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File HQ n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50 Author: [email protected], Edition: May ´05

8

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Printer Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable 8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

3M

880

put ulti-In 0M

Mana

ger

POEIB 8800 MIM

Requirements: SHPT rel. 1.3, 8800 rel. 5.1, 8300 rel. 4.4 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File HQ n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=16,LUT=10 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 8300 Setup: (image quality proposed by Kodak) n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu: Serial: Baud=1200, Data=8, Stop=1, Parity=Even, Protocol=3M n on 8300 Service Menu: Digital Parity=None, Modality Group=0 8800 Setup: n UKEIB:ON/OFF/ON/OFF/OFF/ON,Switch=Right,on EIB:Parity=Disable,Timeout=50 n on COMM Menu: 959 Default; on IMAGE Menu:Density=16, Contrast=10 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2

Author: [email protected], Edition: May ´05

9

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8300 LASER IMAGER / Standalone Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

Host

SPCI

8300

RS422 9-pin Copper Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad I mager

UKEIB

Siemens 37-pin Data Cable SPDI

Requirements: SHPT rel. 1.3, 8300 rel. 4.4 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File HQ n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=16,LUT=10 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8300 Setup: n on 8300 Operator Menu set: n Density=16 n Contrast=10 n Film Layout : Format=1on 1, 2 on 1, 4 on 1, 6 on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=0 (note: image quality setup proposed by Kodak)

Author: [email protected], Edition: May ´05

10

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak Digital Science 969 HQ LASER IMAGER Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens MR

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M

H Q

L a ser Im ag er

M969 HQ

Requirements: SHPT rel. 1.3, HQ rel. 4.2 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File HQ n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=6 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQ Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak) n TFT=693C0, Dmax=3.00, Contrast=6, Density=14 n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on EIB Menu: Parity=Disable, Timeout=50

Author: [email protected], Edition: May ´05

11

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak Digital Science 969 HQT LASER IMAGER M969 HQT Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

SPCI

3 M

H Q

L a s er Im a g e r

Siemens 37-pin Data Cable SPDI

Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File HQ n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=4, LUT=11 and press Set Parameters into Exposure->Job Controller: press Continue Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQT Setup: n on TDB/C board: Jumpers=RS232, Switch=Right n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Magnetom, Timeout=50 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n TFT=PMSV3K, Contrast=11, Density=4, on OIC Menu: Chemistry=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50

Author: [email protected], Edition: May ´05

12

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak Digital Science 959 XL LASER IMAGER Siemens Host Protocol Translator

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Siemens MR

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M L a s e r I m a g er

M959 XL

Requirements: SHPT rel. 1.3, XL rel. 3.8 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (eg you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with eg camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File XL n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density & LUT depending on chemistry into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=XL, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M959 XL Setup: n on COMM Menu: 959 Default n on EIB Menu: Parity=Disable, Timeout=50

Author: [email protected], Edition: May ´05

13

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

SPCI

Keypad Host

UKEIB Imager

SPDI

9-to-9-pin Copper Cable Siemens 37-pin Data Cable

RS422 9-pole Plug

DryView 8100

Requirements: SHPT v1.3, 8100 v1.1 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (eg you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with eg camera=3M 952 with SIB and reboot MR Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=XL, Timeout=50 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=50, P1,…,P6=0 n Alarm=Old, Acquire Timeout=50, P1,…,P6=0 n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMSB n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable Author: [email protected], Edition: May ´05

14

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

SPDI

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

25-9 DPC-UKEIB Cable

DPI4-to-DPC Cable

DryView 8700 Plus

iew 00 DryV 3M 87

Fiber Cable Fiber Cable

9410 PACS Link

Requirements: SHPT v1.3, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (eg you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with eg camera=3M 952 with SIB and reboot MR Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom,Camera Type=XL, Timeout=50 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Author: [email protected], Edition: May ´05

15

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=50, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=mr, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Pmsv3k.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=9, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

16

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens 25-pin Control Cable

Siemens MR

RS232 25-to-9 pin Host Adaptor Cable

SPDI

DryView 8100

RS422 9-pole Plug

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable Control 9-pin

COPCIL Board Copper Cable 9410 PACS Link

Data 37 pin

Requirements: SHPT v1.3, 9410 v1.6, 8100 v2.4.1 Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (eg you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with eg camera=3M 952 with SIB and reboot MR. Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameter into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Magnetom, Camera Type=XL, Timeout=50 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Author: [email protected], Edition: May ´05

17

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=50, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=mr, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Pmsb.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

18

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Siemens MR

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

Kpad / Host Control Octopus Adaptor Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kodak 160 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: MIM 200 v6.1, KELI 160 v7.2 MR Setup: n on Siemens MR install Camera Config.File XLP n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System-> Camera: Density=265 (i.e., Dmax), LUT=3 (i.e., Curve Shape=3.0) Contrast=500 (i.e., Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Vision: n Board/Channel=Digital Board 1 Channel 1, Logical Name=siemmr, n Mod.Name=mr, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On Author: [email protected], Edition: May ´05

19

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n n n n n n n n

Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

20

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Siemens MR

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: MIM 200 v6.1, KELP 2180 v2.17H MR Setup: n on Siemens MR install Camera Config.File XLP n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System-> Camera: Density=265 (i.e., Dmax), LUT=3 (i.e., Curve Shape=3.0) Contrast=500 (i.e., Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Vision: n Board/Channel=Digital Board 1 Channel 1, Logical Name=siemmr, n Mod.Name=mr, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On Author: [email protected], Edition: May ´05

21

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n n n n n n n n n n

Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=2 Formatting: Pixel Pitch=12.6582 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

22

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER Siemens MR

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 MR Setup: n on Siemens MR install Camera Config.File XLP n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System-> Camera: Density=265 (i.e., Dmax), LUT=3 (i.e., Curve Shape=3.0) Contrast=500 (i.e., Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Vision: n Board/Channel=Digital Board 1 Channel 1, Logical Name=siemmr, n Mod.Name=mr, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On Author: [email protected], Edition: May ´05

23

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n n n n n n n n n n n

Formatting: Req.Size Mix in Row=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 Formatting: Trim Width Enabled=0, Trim Width Disabled=0 Formatting: Pixel Pitch=12.5 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

24

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)

Siemens MR

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

ew 0 DryVi 3M 870

Fiber Cable RS422 37-to-50 pin Digital Adaptor Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations and if HQ by installing HQ into Siemens Camera Config.File MR Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Vision: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Mod.Name=smr, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60

Author: [email protected], Edition: May ´05

25

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n

Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8700, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

26

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER

Siemens MR

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

RS23-to-RS422 25-to-15 pin Converter Box

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

RS422 37-to-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: MIM200 v6.1, 8100 v2.4.1 MR Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Vision: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Mod.Name=smr, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Author: [email protected], Edition: May ´05

27

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

n n n n n n n n

n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8100, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On TFT/ULUT=Pmsb.w87, Auto Study=Off, Console=On, Annotation=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

28

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens MR

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Kodak DryView 8900

Requirements: MIM200 v6.1 Requirements: 8900 release 2.0 (ie DRE v2.00.b3, MIM v5.6.b3, MCS v2.00) Note: on some old MR, if you want to configure a new camera because you are replacing an existing one (eg you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with eg camera=3M 952 with SIB and reboot MR MR Setup: n on Siemens CT install Camera Config.File Kodak 2180 (or XLP) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=265 (ie Dmax), LUT=3 (ie Curve Shape=3.0) Contrast=500 (ie Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON ie delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.= Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name= sct, n Mod.Name=sct, Primary Control: Type= Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n on Configure, Destination, Add, Print, Network, Qualified, 8900, Set: Author: [email protected], Edition: May ´05

29

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

n n n n n

n General: Log.Name=8900, IPAddr=accordingly n General: Database=8900, Model=8900, Memory=32 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040,AETitle=NER_8900,Counter=40,Response=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.3 n SCU: Luminance Space= On, Variable Border Density=On n SCU: Curve Shape=On, Perception LUT =On, PLUT Service=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination= 8900, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any Author: [email protected], Edition: May ´05

30

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Pmsv3k.w87 (Always=Y) n Contrast= 9 (Always=Y), Smoothing Type=2 (Always=Y) n Dmin=0.00 (Always=N), Dmax= 3.00 (Always=Y) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mr

Author: [email protected], Edition: May ´05

31

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

DryView 8300 Siemens MR - Harmony/Symphony ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300 and on 8300 use D=16, C=10, Modality Group=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=300 and on 8300 use D=16, C=1, Modality Group=4 Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8300, Port=104 n on MR into System/Run/DICOM Basic Print Configuration set: Matrix=512 (if this field is not available, 512 is default i.e., already set) Filmsize=8x10, Orient=Portrait, Format=eg 3x2 Add, Density=300 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth) 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 10 or b) 1, Sharp/Smooth=0 i.e., Auto n Film Layout : Format=1 on 1, Mode=Portrait, 2:1P, 4:1P, 6:1P n on 8300 Service Menu into Configure User set: Modality Group=a) 0 or b) 4

Author: [email protected], Edition: May ´05

32

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens MR - Harmony/Symphony ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Kodak 190 camera

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 190 rel. 1.7.29 Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 (use a) configuration in case also a Virtuoso workstation is printing on same camera) b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=265, Curve Shape=0.0, Film Contrast=0 Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=190, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth) 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=a) 3.00 or b) 2.65, Curve Shape=a) 3.0 or b) 0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

33

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network DryView 8700 Plus

Siemens MR - Harmony/Symphony ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

9410 PACS Link

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=260, C=4, TFT=WRKSTN2A Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=9410, Port=1024 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

34

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=8, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interp.Type=831, Interp.Num=2 n Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 9 or b) 4 n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 260, Border=0, Mag.Type=8, Smoothing=2 (or 13) n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

35

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

9410 PACS Link DryView 8100

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 9410 v1.6, 8100 v2.4.1 Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=260, C=2, TFT=WRKSTN2A MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=9410, Port=1024 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient.=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

36

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 9 or b) 2 n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 260, Border=0, Mag.Type=8, Smoothing=2 (or 13) n Polarity=1, Orientation=1, Req.Image Size=0, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

37

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens MR - Harmony/Symphony ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300 and on 8300 use D=16, C=10, Modality Group=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=300 and on 8300 use D=16, C=1, Modality Group=4 MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=9410, Port=1024 n on MR into System/Run/DICOM Basic Print Configuration set: Matrix=512 (if this field is not available, 512 is default i.e., already set) Filmsize=8x10, Orient.=Portrait, Format=eg 3x2 Add, Density=300 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

38

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 10 or b) 1 n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u n Max.Density=300, Border=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

39

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=265, Curve Shape=0.0, Film Contrast=0 Harmony/Symphony/Sonata or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=160, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

40

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

41

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens MR - Harmony/Symphony ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 2180 v2.17H Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=265, Curve Shape=0.0, Film Contrast=0 Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=2180, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

42

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

43

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens MR - Harmony/Symphony ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=265, Curve Shape=0.0, Film Contrast=0 Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=1120, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

44

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

45

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=265, C=4, TFT=WRKSTN2A Harmony/Symphony/Sonata or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8200, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On

Author: [email protected], Edition: May ´05

46

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Supported Item: Remote Image Deletion=On, Rotation=On Interpolation: No Magnification=On, Bilin=On, Repl=On Interpolation: Cubic Spline=On, Cubic Convolution 2=On Format Types: Custom=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 SCU: Density Space=On, Variable Border=On, PLUT Service=On SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) Contrast (dry)=a) +9 or b) +4 (Always=Y) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=2 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

47

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens MR - Harmony/Symphony/Sonata ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=260, C=4, TFT=WRKSTN2A Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8700, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

48

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 4 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (or 13) (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

49

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=260, C=2, TFT=WRKSTN2A MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8100, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient.=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Author: [email protected], Edition: May ´05

50

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (or 13) (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

51

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens MR - Harmony/Symphony ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300 and on 8300 use D=16, C=10, Modality Group=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=300 and on 8300 use D=16, C=1, Modality Group=4 MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8300, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Matrix=512 (if this field is not available, 512 is default i.e., already set) Filmsize=8x10, Orient.=Portrait, Format=eg 3x2 Add, Density=300 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)

Author: [email protected], Edition: May ´05

52

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) u1_109b.w8u or b) wrkstn2a.w8u (Always=Y) n Contrast (dry)=a) 10 or b) 1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

53

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Kodak DryView 8900

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 c) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB d) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=260, C=4, TFT=WRKSTN2A Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8900, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024, Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (ie Image Data not lutted by MR, lutted by Camera) b) LUT=1 (ie Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (ie smooth) 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On

Author: [email protected], Edition: May ´05

54

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n n n n n n n n n n

Formatting: DICOM Annotation Box=On, Req.Image Size=On Formatting: Req.Size Scale=On, Req.Size Mix Page=On Formatting: Req.Size Mix Row=On, Trim=On, Formatting: True Landscape=On, Rotation=On Formatting: Minify/Crop=On, Tonescaling on Image Basis=On Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 Formatting: Min Vert Sep=4, Trim Width Enabled=4 Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 9 or b) 4 (Always=Y), n Smoothing Type=2 (or 13) (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mr

Author: [email protected], Edition: May ´05

55

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens MR - Harmony/Symphony/Sonata ie Numaris 3.5 platform - Open/Vision/Impact ie Numaris 3 platform

Kodak DryView 8150

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 e) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB f) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=DV8150, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set: Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024, Format=eg 5x4 Add, Density=300 a) LUT=10 (ie Image Data not lutted by MR, lutted by Camera) b) LUT=1 (ie Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (ie smooth) 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On

Author: [email protected], Edition: May ´05

56

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 9 or b) 1 (Always=Y),Smoothing Type=2 (or 13) (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mr

Author: [email protected], Edition: May ´05

57

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products

Siemens MR Open/Vision/Impact via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens MR - Open/Vision/Impact ie Numaris 3 platform

Kodak CMI 1000

Requirements: MR Numaris 3 rel. VB33A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 g) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB h) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A MR Setup: n on MR into System/Service declare camera IP Addr, AE Title, Port n on MR into System/Run/DICOM Basic Print Configuration set: Matrix=512 (if this field is not available, 512 is default ie already set) Filmsize=8x10, Orient.=Portrait, Format=eg 3x2 Add, Density=300 a) LUT=10 (ie Image Data not lutted by MR, lutted by Camera) b) LUT=1 (ie Image lutted by MR, linear-in-Density LUT in Camera) n on MR into Exposure/Settings set Graduation=smt (ie smooth) CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality: n Contrast=a) 9 or b) 7 (Always=Y) Author: [email protected], Edition: May ´05

58

Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products n TFT Set (From list)=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (or 13) (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

59

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Setup for Siemens Nuc.Med. e.soft with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Kodak DryView 8300

Requirements: e.soft v3.5 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2736x2136 (since Landscape), Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: NM Image=a) linear or b) NM, Max Density=3.00 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 4 or b) 1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=a) 2 or b) 4

Author: [email protected], Edition: May ´05

2

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Kodak 190 camera

Requirements: e.soft v3.5 Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=4.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : NM Image=a) linear or b) NM, Max Density=3.00 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=a) 4.0 or b) 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens e.soft Nuc. Med. workstation syngo platform

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: e.soft v3.5 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and if HQ by installing HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=15, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: NM Image=a) linear or b) NM, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber Author: [email protected], Edition: May ´05

4

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n n n n n n n n n n n n n n

Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz Film Mismatch=Print Always, Interpolation Type=831 Interp Num=2, Max.Density=300, Contrast=6, Border=0 TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: SCU AETitle=accordingly, IPAddr=accordingly SCP=8700, Copies=1, Contrast Table=a) 15 or b) 3 TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

COPCIL Board Copper Cable

Siemens e.soft Nuc. Med. workstation syngo platform

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link

Kodak DryView 8100

Requirements: e.soft v3.5 Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=15, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: NM Image=a) linear or b) NM, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

Author: [email protected], Edition: May ´05

6

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

n n n n n n n n n

on Device Setup, SCP PRINTERS, Current Providers: Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: SCU AETitle=accordingly, SCU IPAddr=accordingly SCP=8100, Copies=1, Contrast Table=a) 15 or b) 3 TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens e.soft Nuc. Med. workstation syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: e.soft v3.5 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: NM Image=a) linear or b) NM, Max Density=3.00 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u

Author: [email protected], Edition: May ´05

8

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 4 or b) 1 n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=4.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : NM Image=a) linear or b) NM, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30,

Author: [email protected], Edition: May ´05

10

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 4 i.e., 575 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=4.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: NM Image=a) linear or b) NM, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180

Author: [email protected], Edition: May ´05

12

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 4 i.e., 575 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=4.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : NM Image=a) linear or b) NM, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120

Author: [email protected], Edition: May ´05

14

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 4 i.e., 575 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=15, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=3, TFT=WRKSTN2A Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node=k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set NM Image=a) linear or b) NM, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:

Author: [email protected], Edition: May ´05

16

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

General: Log.Name=8200, IPAddr=100.100.100.40, General: Database Name=8200, Model=8200, Memory=32 Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) Supported Item: Collation=On, Common Text=On, Tonescaling=On Supported Item: Remote Image Deletion=On, Rotation=On Interpolation: No Magnification=On, Bilin=On, Repl=On Interpolation: Cubic Spline=On, Cubic Convolution 2=On Format Types: Custom=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 SCU: Density Space=On, Variable Border=On, PLUT Service=On SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) Contrast (dry)=a) +15 or b) +3 (Always=Y) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=0 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens e.soft Nuc. Med. workstation syngo platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=15, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set NM Image=a) linear or b) NM, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly

Author: [email protected], Edition: May ´05

18

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 15 or b) 3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

COPCIL Board Copper Cable

Siemens e.soft Nuc. Med. workstation syngo platform

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=15, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set NM Image=a) linear or b) NM, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

20

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 15 or b) 3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Control 9 pin Siemens e.soft Nuc. Med. workstation syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Kodak DryView 8300

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: NM Image=a) linear or b) NM, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:

Author: [email protected], Edition: May ´05

22

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 4 or b) 1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n ICCProfile=Off (Always=N), Modality=OT (Always=N) n BodyPart=Default (Always=N), Modality Group=1 n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Conv.Group=1, Gamma Table=1, Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Kodak DryView 8900

Requirements: e.soft v3.5 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=15, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set Usage of Presentation LUT=disabled NM Image=a) linear (if not there, choose nothing selected) or b) NM SC Image=a) linear (if not there, choose nothing selected) or b) NM Max Density=3.00 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:

Author: [email protected], Edition: May ´05

24

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 15 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=esoft

Author: [email protected], Edition: May ´05

25

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Kodak DryView 8150

Requirements: e.soft v3.5 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=NM c) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=15, TFT=SIEFL87B d) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200), DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set Usage of Presentation LUT=disabled NM Image=a) linear (if not there, choose nothing selected) or b) NM SC Image=a) linear (if not there, choose nothing selected) or b) NM Max Density=3.00 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM

Author: [email protected], Edition: May ´05

26

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 15 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=esoft

Author: [email protected], Edition: May ´05

27

Siemens Nuc.Med. model e.soft with LASER IMAGER Products

Nuc.Med. e.soft via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens e.soft Nuc. Med. workstation syngo platform

Kodak CMI 1000

Requirements: e.soft v4.0 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=NM e) into Local Service/Config/DICOM LUT files set NM Image=linear if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=15, TFT=SIEFL87B f) into Local Service/Config/DICOM LUT files set NM Image=NM if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set NM Image=a) linear or b) NM, Max Density=3.00 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000

Author: [email protected], Edition: May ´05

28

Siemens Nuc.Med. model e.soft with LASER IMAGER Products n n n n n n

n

n

Modality (SCU) Config (or after modality recognition): Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No Note: Color IQ settings used when images sent with Color DICOM SOP under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: under Image Quality, Grayscale Image Quality: n Contrast=a) 15 or b) 7 (Always=Y) n TFT Set (From list)=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens Nuc.Med. ICON with LASER IMAGER Products

Setup for Siemens Nuc.Med. ICON with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Kodak DryView 8300

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8300 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8300, Port=104 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: Modality Group=0

Author: [email protected], Edition: May ´05

2

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Kodak 190 camera

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 190 rel. 1.7.29 Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=k190 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=190, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens ICON Nuc. Med. workstation McIntosh platform

Fiber Cable yView 00 Dr 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8700 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=9410, Port=1024 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: Author: [email protected], Edition: May ´05

4

Siemens Nuc.Med. ICON with LASER IMAGER Products n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak 9410 PACS Link Kodak DryView 8100

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 9410 v1.6, 8100 v2.4.1 Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8100 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=9410, Port=1024 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly Author: [email protected], Edition: May ´05

6

Siemens Nuc.Med. ICON with LASER IMAGER Products n n n n n n

SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens ICON Nuc. Med. workstation McIntosh platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8300 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=9410, Port=1024 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly

Author: [email protected], Edition: May ´05

8

Siemens Nuc.Med. ICON with LASER IMAGER Products n n n n n n

SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No Trim=No, Attribute Warning=No Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Crossed Network Cable

Kodak 160 camera

Kodak MIM 200

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=k160 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=160, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On

Author: [email protected], Edition: May ´05

10

Siemens Nuc.Med. ICON with LASER IMAGER Products n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 2180 v2.17H Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=k2180 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=2180, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) Author: [email protected], Edition: May ´05

12

Siemens Nuc.Med. ICON with LASER IMAGER Products n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 1120 v2.40/032 Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=k1120 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=1120, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)

Author: [email protected], Edition: May ´05

14

Siemens Nuc.Med. ICON with LASER IMAGER Products n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8200 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8200, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)

Author: [email protected], Edition: May ´05

16

Siemens Nuc.Med. ICON with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) Supported Item: Collation=On, Common Text=On, Tonescaling=On Supported Item: Remote Image Deletion=On, Rotation=On Interpolation: No Magnification=On, Bilin=On, Repl=On Interpolation: Cubic Spline=On, Cubic Convolution 2=On Format Types: Custom=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 SCU: Density Space=On, Variable Border=On, PLUT Service=On SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=2 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens ICON Nuc. Med. workstation McIntosh platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8700 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8700, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700

Author: [email protected], Edition: May ´05

18

Siemens Nuc.Med. ICON with LASER IMAGER Products n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8100 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8100, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Author: [email protected], Edition: May ´05

20

Siemens Nuc.Med. ICON with LASER IMAGER Products n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Control 9 pin Siemens ICON Nuc. Med. workstation McIntosh platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Kodak DryView 8300

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8300 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8300, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even

Author: [email protected], Edition: May ´05

22

Siemens Nuc.Med. ICON with LASER IMAGER Products n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=u1_109b.w8u (Always=Y), Contrast (dry)=10 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Kodak DryView 8900

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8900 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8900, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On

Author: [email protected], Edition: May ´05

24

Siemens Nuc.Med. ICON with LASER IMAGER Products n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Pmsv3k.w87 (Always=Y) n Contrast= 9 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=icon

Author: [email protected], Edition: May ´05

25

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Kodak DryView 8150

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8150 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=DV8150, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On

Author: [email protected], Edition: May ´05

26

Siemens Nuc.Med. ICON with LASER IMAGER Products n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=icon

Author: [email protected], Edition: May ´05

27

Siemens Nuc.Med. ICON with LASER IMAGER Products

Siemens ICON via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens ICON Nuc. Med. workstation McIntosh platform

Kodak CMI 1000

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W (or Color) n set Host Name=CMI1000 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=CMI1000, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:

Author: [email protected], Edition: May ´05

28

Siemens Nuc.Med. ICON with LASER IMAGER Products n Contrast=9 (Always=Y) n TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens workstation Leonardo with LASER IMAGER Products

Setup for Siemens workstation Leonardo with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ............................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ............................. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens workstation Leonardo with LASER IMAGER Products

Siemens Leonardo via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

DryView 8300 Siemens Leonardo Workstation syngo platform

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 4 or b) 1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=a) 2 or b) 4

Author: [email protected], Edition: May ´05

2

Siemens workstation Leonardo with LASER IMAGER Products

Siemens Leonardo via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens Leonardo Workstation syngo platform

Kodak 190 camera

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190, DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=a) 3.0 or b) 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) DICOM Network DryView 8700 Plus

Siemens Leonardo Workstation Syngo platform

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

9410 PACS Link

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00

Author: [email protected], Edition: May ´05

4

Siemens workstation Leonardo with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 4 or b) 2 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Leonardo Workstation Syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

9410 PACS Link

DryView 8100

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831

Author: [email protected], Edition: May ´05

6

Siemens workstation Leonardo with LASER IMAGER Products n Interp Num=0, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 4 or b) 2 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Leonardo Workstation syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831

Author: [email protected], Edition: May ´05

8

Siemens workstation Leonardo with LASER IMAGER Products n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 4 or b) 1 n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens Leonardo Workstation syngo platform

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=434 (i.e., 3.0), Film Contrast=0 b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160, DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

10

Siemens workstation Leonardo with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens Leonardo Workstation syngo platform

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180, DICOM Node=k2180, Pixel Size=79x79, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5156, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

12

Siemens workstation Leonardo with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens Leonardo Workstation syngo platform

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0 Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120, DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

14

Siemens workstation Leonardo with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network Kodak DryView 8200 Siemens Leonardo Workstation syngo platform

Crossed Network Cable

Kodak MIM 200

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200, DICOM Node=k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set : XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

16

Siemens workstation Leonardo with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +4 or b) +2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) DICOM Network

iew 00 DryV 3M 87

Siemens Leonardo Workstation syngo platform

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700, DICOM Node=dv8700, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup:

Author: [email protected], Edition: May ´05

18

Siemens workstation Leonardo with LASER IMAGER Products n n n n

on Configure, Network: Node Name=MIM, IPAddr=accordingly Subnet Mask=accordingly, Gateway Addr=accordingly on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens Leonardo Workstation syngo platform

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100, DICOM Node=dv8100, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5216, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

Author: [email protected], Edition: May ´05

20

Siemens workstation Leonardo with LASER IMAGER Products n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens Leonardo Workstation syngo platform

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=4, Modality Group=2 b) into Local Service/Config/DICOM LUT files set set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300, DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

Author: [email protected], Edition: May ´05

22

Siemens workstation Leonardo with LASER IMAGER Products n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 4 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens Leonardo Workstation syngo platform

Kodak DryView 8900

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=xa c) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B d) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB (or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM

Author: [email protected], Edition: May ´05

24

Siemens workstation Leonardo with LASER IMAGER Products n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 4 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=leo

Author: [email protected], Edition: May ´05

25

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens Leonardo Workstation syngo platform

Kodak DryView 8150

Requirements: Leonardo syngo platform VB30B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=xa e) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B f) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150, Type=DICOM Printer,Class=kodak8150, DICOM Node=kodak8150, Pixel Size=78.12x78.12, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save - into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM

Author: [email protected], Edition: May ´05

26

Siemens workstation Leonardo with LASER IMAGER Products n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 4 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=leo

Author: [email protected], Edition: May ´05

27

Siemens workstation Leonardo with LASER IMAGER Products

Leonardo via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens Leonardo Workstation syngo platform

Kodak CMI 1000

Requirements: Leonardo platform syngo VD30A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=xa g) into Local Service/Config/DICOM LUT files set XA Image=linear if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B h) into Local Service/Config/DICOM LUT files set XA Image=xa if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer, Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save - into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly

Author: [email protected], Edition: May ´05

28

Siemens workstation Leonardo with LASER IMAGER Products n n n n n n n n

n

n

under More Settings: DICOM Port=5040 Edit Host Name/AE Title=CMI1000 Modality (SCU) Config (or after modality recognition): Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No Note: Color IQ settings used when images sent with Color DICOM SOP under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: under Image Quality, Grayscale Image Quality: n Contrast=a) 4 or b) 7 (Always=Y) n TFT Set (From list)=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens workstation MagicView 300 with LASER IMAGER Products

Setup for Siemens workstation MagicView 300 with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ............................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .............................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ............................. 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 22 n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens workstation MagicView 300 with LASER IMAGER Products

Siemens Magicview 300 via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

Siemens MagicView 300

Kodak DryView 8300

Requirements: Siemens Magicview 300 rel. VA30B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 8300, Alias=Kodak DV8300, AET=8300 TCP/IP: Host =PC-name of DV8300, Port=104, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8300, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=0, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of DV8300 must be inserted in hosts of MV300 PC 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=Auto n Film Layout : Format=1 on 1, Mode=Portrait, 2:1P, 4:1P, 6:1P n on 8300 Service Menu into Configure User set: Modality Group=0

Author: [email protected], Edition: May ´05

2

Siemens workstation MagicView 300 with LASER IMAGER Products

Siemens MagicView 300 via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens MagicView 300

Kodak 190 camera

Requirements: Siemens MagicView 300 rel. VA30B, 190 rel. 1.7.29 Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 190, Alias=Kodak MLP190, AET=190 TCP/IP: Host =PC-name of MLP190, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak MLP190, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MLP190 must be inserted in hosts of MV300 PC 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=30.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

3

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network Kodak DryView 8700 Plus

Siemens MagicView 300

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

Kodak 9410 PACS Link

Requirements: Siemens MagicView 300 rel. VA30B, 9410 v1.6, 8700 v1.34 Note: Image Data not lutted by MV300, lutted by Camera Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into MagicView Camera Config.File MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Network Names: Printer Type=Kodak 8700, Alias=Kodak DV8700, AET=9410 TCP/IP: Host =PC-name of 9410, Port=1024, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8700, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of 9410 must be inserted in hosts of MV300 PC

Author: [email protected], Edition: May ´05

4

Siemens workstation MagicView 300 with LASER IMAGER Products 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=dv8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 n on Device Setup, SCP PRINTERS, Current Providers: n Printer=dv8700, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=dv8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

5

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens MagicView

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

9410 PACS Link DryView 8100

Requirements: Siemens MagicView 300 rel. VA30B, 9410 v1.6, 8100 v2.4.1 Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Network Names: Printer Type=Kodak 8100, Alias=Kodak DV8100, AET=9410 TCP/IP: Host =PC-name of 9410, Port=1024, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8100, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of 9410 must be inserted in hosts of MV300 PC

Author: [email protected], Edition: May ´05

6

Siemens workstation MagicView 300 with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

7

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens MagicView 300

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Siemens MagicView 300 rel. VA30B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 8300, Alias=Kodak DV8300, AET=9410 TCP/IP: Host =PC-name of 9410, Port=1024, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8300, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=0, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of 9410 must be inserted in hosts of MV300 PC

Author: [email protected], Edition: May ´05

8

Siemens workstation MagicView 300 with LASER IMAGER Products 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

9

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens MagicView 300

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, KELI 160 v7.2 Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Network Names: Printer Type=Kodak 160, Alias=Kodak KELI160, AET=160 TCP/IP: Host =PC-name of MIM200, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak KELI160, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC

Author: [email protected], Edition: May ´05

10

Siemens workstation MagicView 300 with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 434 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

11

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens MagicView 300

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 2180 v2.17H Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 2180, Alias=Kodak KELP2180, AET=2180 TCP/IP: Host =PC-name of DPS, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak KELP2180, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of DPS must be inserted in hosts of MV300 PC

Author: [email protected], Edition: May ´05

12

Siemens workstation MagicView 300 with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 434 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

13

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens MagicView 300

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 1120, Alias=Kodak KELP1120, AET=1120 TCP/IP: Host =PC-name of DPS, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak KELP1120, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of DPS must be inserted in hosts of MV300 PC

Author: [email protected], Edition: May ´05

14

Siemens workstation MagicView 300 with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 434 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

15

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens workstation MagicView 300

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Network Names: Printer Type=Kodak 8200,Alias=Kodak DV8200,AET=8200 TCP/IP: Host =PC-name of MIM200, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8200, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retri.e.,s=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32

Author: [email protected], Edition: May ´05

16

Siemens workstation MagicView 300 with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) Supported Item: Collation=On, Common Text=On, Tonescaling=On Supported Item: Remote Image Deletion=On, Rotation=On Interpolation: No Magnification=On, Bilin=On, Repl=On Interpolation: Cubic Spline=On, Cubic Convolution 2=On Format Types: Custom=On, Row Symmetric=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 SCU: Density Space=On, Variable Border=On, PLUT Service=On SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=11 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

17

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens workstation MagicView 300

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into MagicView Camera Config.File Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 8700, Alias=Kodak DV8700, AET=8700 TCP/IP: Host =PC-name of MIM200, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8700, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC

Author: [email protected], Edition: May ´05

18

Siemens workstation MagicView 300 with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens workstation MagicView 300

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 8100, Alias=Kodak DV8100, AET=8100 TCP/IP: Host =PC-name of MIM200, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8100, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

20

Siemens workstation MagicView 300 with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens workstation MagicView 300

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 8300, Alias=Kodak DV8300, AET=8300 TCP/IP: Host =PC-name of MIM200, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8300, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=0, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32

Author: [email protected], Edition: May ´05

22

Siemens workstation MagicView 300 with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Media Info: Media=8x10in, 2256x2676, 2596, Blue Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=11.811 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 on Configure, SCP Services, select the specific modality, Modify: PLUT=N, ToneScaling=PerceptionLUT (Always=Y) TFT/ULUT=u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) NeventReports=Off (Always=Y), Warning Status=On Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off Modality ID=Off, Annotation Override=Off (Always=N) Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) Smoothing Type=2 (Always=N) Border=Black (Always=N), Film Base=Blue Film (Always=N) Film Size=8INx10IN (Always=N), Negotiate Color Print=Off

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

23

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens workstation MagicView 300

Kodak DryView 8900

Requirements: Siemens MagicView 300 rel. VA40A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 8900 (or 8100), Alias=Kodak DV8900, AET=8900 TCP/IP: Host =PC-name of 8900, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8900, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of 8900 must be inserted in hosts of MV300 PC 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any

Author: [email protected], Edition: May ´05

24

Siemens workstation MagicView 300 with LASER IMAGER Products n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=Y), Contrast=9 (Always=Y) n Smoothing Type=11 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mv300

Author: [email protected], Edition: May ´05

25

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens workstation MagicView 300

Kodak DryView 8150

Requirements: Siemens MagicView 300 rel. VA40A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak 8150 (or 8100),Alias=Kodak DV8150,AET=DV8150 TCP/IP: Host =PC-name of 8150, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak DV8150, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of 8150 must be inserted in hosts of MV300 PC 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On

Author: [email protected], Edition: May ´05

26

Siemens workstation MagicView 300 with LASER IMAGER Products n n n n n n n n n n n n n n n n n n n n n n n

Formatting: DICOM Annotation Box=On, Req.Image Size=On Formatting: Req.Size Scale=On, Req.Size Mix Page=On Formatting: Req.Size Mix Row=On, Trim=On, Formatting: True Landscape=On, Rotation=On Formatting: Minify/Crop=On, Tonescaling on Image Basis=On Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 Formatting: Min Vert Sep=2, Trim Width Enabled=2 Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: Negotiate Presentation LUT=No, Negotiate Color Print=No, TFT Set Name=Pmsb.w87 (Always=Y) Contrast=9 (Always=N), Smoothing Type=11 (Always=N) Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) Image Polarity=Normal (Always=N) NeventReports=No (Always=Y), Warnings=Yes Print Priority=Normal (Always=N), Border=3.99 (Always=N) 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, Modality ID=No, Annotation Override=No, Density Patch=No Image Resizing=Minify/Scale (Always=N), Text Box Location=None, Source ID=mv300

Author: [email protected], Edition: May ´05

27

Siemens workstation MagicView 300 with LASER IMAGER Products

MagicView 300 via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens workstation MagicView 300

Kodak CMI 1000

Requirements: Siemens MagicView 300 rel. VA40A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list): Names: Printer Type=Kodak CMI1000, Alias=Kodak CMI1000, AET=CMI1000 TCP/IP: Host =PC-name of CMI1000, Port=5040, DNS/WINS=clicked - Save - into Film Sheet set: Film Job: Printer Alias=Kodak CMI1000, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO - into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked - note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of CMI1000 must be inserted in hosts of MV300 PC CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:

Author: [email protected], Edition: May ´05

28

Siemens workstation MagicView 300 with LASER IMAGER Products n under Image Quality, Grayscale Image Quality: n Contrast=9 (Always=Y) n TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=11 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

29

Siemens workstation MagicView 1000 with LASER IMAGER Products

Setup for Siemens workstation MagicView 1000 with LASER IMAGERS Connection POINT-TO-POINT:

n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual.......................................................................... 3 4 5

n Kodak DryView 8700 LASER IMAGER / Plus .......................................................................... n Kodak DryView 8700 LASER IMAGER / Standard ................................................................... n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8500 LASER IMAGER / Dual.......................................................................... 6 7 8

n Kodak DryView 8500 LASER IMAGER / Plus .......................................................................... n Kodak DryView 8500 LASER IMAGER / Standard ................................................................... n Kodak DryView 8800 MULTI-INPUT MANAGER / n n n n n n n n n n n n n n n

Kodak DryView 8300 LASER IMAGER / Dual.......................................................................... Kodak DryView 8300 LASER IMAGER / Standalone................................................................ Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual / Kodak DryView 8300 LASER IMAGER / Dual.......................................................................... Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual / Kodak DryView 8500 LASER IMAGER / Dual.......................................................................... Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual / Kodak DryView 8300 LASER IMAGER / Dual.......................................................................... Kodak Digital Science 969 HQ LASER IMAGER.................................................................. Kodak Digital Science 969 HQT LASER IMAGER ............................................................... Kodak Digital Science 959 XL LASER IMAGER .................................................................. Kodak DryView 8100 LASER IMAGER..................................................................................... Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ........................................... Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1)................................................................................ Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ............................................................................. Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .......................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .......................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) ........... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4).........................................................................

9 10

11

12

13 14 15 16 17

18 20 22 24 26 28 30

1

Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER. 2

Author: [email protected], Edition: May ´05

1

Siemens workstation MagicView 1000 with LASER IMAGER Products

Connection via DICOM:

n Kodak DryView 8300 LASER IMAGER..................................................................................... 32 n Kodak Digital Science 190 MEDICAL LASER PRINTER .................................................... 33 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / n n n n n n n n n n n n n n

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual,8500 Plus, 8800/8500 Dual and HQ) ( 1) ............................................ Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1)................................................................................ Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER (1)................................................................................ Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ........................................................................................................................ Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ............................................................................. Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .......................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER (2,3,4) .......................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)..................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ..................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5)....................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER (4,5)....................................................................... Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (5) .............................................................................................................. Kodak DryView 8900 LASER IMAGER..................................................................................... Kodak DryView 8150 LASER IMAGER..................................................................................... Kodak Color Medical Imager 1000.............................................................................................

Author: [email protected], Edition: May ´05

34 36 38

40 42 44 46 48

50 52 54

56 59 62 65

2

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Siemens Host Protocol Translator

Siemens Camera Server

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

nput ulti-I 0M 880 3M

00 3M 87

ger Mana

DryView

Fiber Cable 8700 Dual

8800 MIM

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, 8800 rel. 4.2, 8700 rel. 1.15 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File DRY_VIEW n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

3

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8700 LASER IMAGER / Plus Siemens Camera Server

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8700 Plus

Requirements: Siemens MagicView rel. VA31B, 8700 Plus rel. 1.15 Note: Magicview could be linked to 8700 direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File DRY_VIEW n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Plus Setup: n on COMM Menu: n Siemens Default n on SIEMENS Menu: n Modality=Sienet, Timeout=75 n on IMAGE Menu: n TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

4

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8700 LASER IMAGER / Standard 8700 Standard Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI iew 00 DryV 3M 87

Siemens 37-pin Data Cable SPDI

Requirements: Siemens MagicView rel. VA31B, 8700 Standard rel. 1.15 Note: Magicview could be linked to 8700 direct (Local Print) or over Camera Server Setup: on Siemens MagicView rel. VA31B install Camera Config.File DRY_VIEW Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8700 Standard Setup: n on TDB/C board: n Jumpers=RS232, Switch=Right n on COMM Menu: n Siemens Default n on SIEMENS Menu: n Modality=Sienet, Timeout=75 n on IMAGE Menu: n TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on SYSTEM Menu: n Memory Management=Best Fit n on EIB Menu: n Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

5

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Siemens Host Protocol Translator

Siemens Camera Server

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

ger Mana put lti-In Mu 8800 3M

iew 0 DryV 3M 870

Fiber Cable 8500 Dual

8800 MIM

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, 8800 rel. 5.1, 8500 rel. 1.22 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

6

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8500 LASER IMAGER / Plus Siemens Host Protocol Translator

Siemens Camera Server

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

yView 00 Dr 3M 87

8500 Plus

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, 8500 Plus rel. 1.22 Note: Magicview could be linked to 8500 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8500 Plus Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

7

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8500 LASER IMAGER / Standard Siemens Host Protocol Translator

Siemens Camera Server

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB I mager

SPDI 9-to-9-pin Copper Cable Siemens 37-pin Data Cable

yView 00 Dr 3M 87

8500 Standard

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, 8500 Standard rel. 1.22 Note: Magicview could be linked to 8500 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

8

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8300 LASER IMAGER / Dual Siemens Host Protocol Translator

Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable 8300 Dual Fiber Cable

9-to-9-pin Copper Cable 37-pin Digital Cable

3M

880

put ulti-In 0M

Mana

ger

POEIB 8800 MIM

Requirements: Siemens MagicView rel. VA31C, SHPT rel. 1.3, 8800 rel. 5.1, 8300 rel. 4.4 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31C install Camera Config.File 8300 n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=4 8800 Setup: n on COMM Menu: 959 Default n on IMAGE Menu: Density=16, Contrast=1 n on HOST Menu: Pixel Corr.=Yes, Scale Format=Yes, Scale Mag.=Yes n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

9

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8300 LASER IMAGER / Standalone Siemens Host Protocol Translator

Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI

8300

RS422 9-pin Copper Cable Host

Siemens 37-pin Data Cable

Keypad

I mager

UKEIB

SPDI

Requirements: Siemens MagicView rel. VA31C, SHPT rel. 1.3, 8300 rel. 4.4 Note: Magicview could be linked to 8300 direct (i.e., Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31C install Camera Config.File 8300 n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8300 Setup: n on 8300 Operator Menu set: n Density=16 n Contrast=1 n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=4

Author: [email protected], Edition: May ´05

10

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual / Kodak DryView 8300 LASER IMAGER / Dual Siemens Host Protocol Translator

Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

9-to-9-pin Copper Cable Fiber Cable 37-pin Digital Cable

POEIB 3M

lti-I 0 Mu 880

nager t Ma npu

Fiber Cable

iew 0 DryV 3M 870

8300 Dual

8800 MIM 8700 Dual

Requirements: Siemens MagicView VA31B, SHPT 1.3, 8800 v.5.1, 8700 v.1.22, 8300 v.4.4 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8300 Setup: n on 8300 Operator Menu set: n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None, Modality Group=4 8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif.=Yes n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

11

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual / Kodak DryView 8500 LASER IMAGER / Dual Siemens Host Protocol Translator

Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable 8700 Dual

View 00 Dry 3M 87 er anag tM npu ulti-I 0M 880 3M

Fiber Cable

View 00 Dry 3M 87

8800 MIM 8500 Dual

Requirements: Siemens MagicView VA31B, SHPT 1.3, 8800 v.5.1, 8700 v.1.22, 8500 v.1.22 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

8800/8700 Dual/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

12

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual / Kodak DryView 8300 LASER IMAGER / Dual Siemens Host Protocol Translator

Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

9-to-9-pin Copper Cable Fiber Cable 37-pin Digital Cable

POEIB 3M

lti-I 0 Mu 880

nager t Ma npu

Fiber Cable

iew 0 DryV 3M 870

8300 Dual

8800 MIM 8500 Dual

Requirements: Siemens MagicView VA31B, SHPT 1.3, 8800 v.5.1, 8500 v.1.22, 8300 v.4.4 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8300 Setup: n on 8300 Operator Menu set: n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None, Modality Group=4 8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif.=Yes n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

13

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak Digital Science 969 HQ LASER IMAGER Siemens Host Protocol Translator

Siemens Camera Server

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M

H Q

L a ser Im ag er

M969 HQ

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, M969 HQ rel. 4.2 Note: Magicview could be linked to HQ direct (i.e., Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQ Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

14

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak Digital Science 969 HQT LASER IMAGER M969 HQT Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI

3 M

H Q

L a s er Im a g e r

Siemens 37-pin Data Cable SPDI

Requirements: Siemens MagicView rel. VA31B, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Note: Magicview could be linked to HQT direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File M959_XL Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M969 HQT Setup: n on TDB/C board: Jumpers=RS232, Switch=Right n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Sienet, Timeout=75 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry) n TFT=TLII, Contrast=5, Density=7, on OIC Menu: Chemistry=1 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

15

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak Digital Science 959 XL LASER IMAGER Siemens Host Protocol Translator

Siemens Camera Server

RS232 25-to-9 pin Host Adaptor Cable

Siemens 25-pin Control Cable

Keypad Host

SPCI

UKEIB

Siemens 37-pin Data Cable DEIB

SPDI

Fiber Cable Fiber Cable

3 M L a s e r I m a g er

M959 XL

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, M959 XL rel. 3.8 Note: Magicview could be linked to XL direct (i.e., Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File M959_XL n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on SHPT set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n on XL Input Module install LUT TLII_959 Linear-in-Density p/n 78.8079.9817.0 Siemens RS232 25-to-9 Host Adaptor Cable pinout

25 pin side 9 pin side

2 4

3 6

7,1 1

18 5

25 9

M959 XL Setup: n on COMM Menu: n 959 Default n on EIB Menu: n Parity=Disable, Timeout=75

Author: [email protected], Edition: May ´05

16

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA31B with Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPCI

Keypad Host

UKEIB Imager

SPDI

9-to-9-pin Copper Cable Siemens 37-pin Data Cable

RS422 9-pole Plug

DryView 8100

Requirements: Siemens MagicView rel. VA31B, SHPT v1.3, 8100 v1.1 Note: Magicview could be linked to 9410 direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel.VA31B install Camera Config.File DRY_VIEW n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=75, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=WRKSTN2A n on LOCAL PANEL Menu: Contrast=2, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable

Author: [email protected], Edition: May ´05

17

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) Siemens Host Protocol Translator

Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPDI

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

25-9 DPC-UKEIB Cable

DPI4-to-DPC Cable

DryView 8700 Plus

iew 00 DryV 3M 87

Fiber Cable Fiber Cable

9410 PACS Link

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: SHPT v1.3, 9410 v1.6, 8700 v1.34 Note: Magicview could be linked to 9410 direct (Local Print) or over Camera Server Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into MagicView Camera Config.File Setup: n on Siemens MagicView rel.VA31B install Camera Config.File DRY_VIEW n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Author: [email protected], Edition: May ´05

18

Siemens workstation MagicView 1000 with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=75, Parity=None, Memory=22 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=mv, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Wrkstn2a.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=2, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

19

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER Siemens Host Protocol Translator

Siemens Camera Server

Siemens 25-pin Control Cable

RS232 25-to-9 pin Host Adaptor Cable

SPDI

DryView 8100

RS422 9-pole Plug

Keypad Host

SPCI

UKEIB Copper Cable

Siemens 37-pin Data Cable

DPC

DPC-to-UKEIB Cable

DPI4 Cable Control 9-pin

COPCIL Board Copper Cable 9410 PACS Link

Data 37 pin

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: SHPT v1.3, 9410 v1.6, 8100 v2.4.1 Note: Magicview could be linked to 9410 direct (Local Print) or over Camera Server Setup: n on MagicView install Camera Config.File DRY_VIEW (or if problems XL) n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Author: [email protected], Edition: May ´05

20

Siemens workstation MagicView 1000 with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=75, Parity=None, Memory=22 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200 on Device Setup, HOST KEYPADS: n Kpad=mv, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Wrkstn2a.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=2, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

21

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER Siemens Camera Server

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 160 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: Magicview could be linked to MIM200 direct (Local Print) or over Camera Server MagicView Setup: on MagicView VA31B install Camera Config.File XLP MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=MagicView Wkst.: n Board/Channel=Digital Board 1 Channel 1, Logical Name=mv, n Mod.Name=mv, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=64, Lines=64, Parity=None, Timer=59, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On Author: [email protected], Edition: May ´05

22

Siemens workstation MagicView 1000 with LASER IMAGER Products n n n n n n n

Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=0.0, Auto Study=Off, Console=On 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

23

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER Siemens Camera Server

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 2180 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: Magicview could be linked to MIM200 direct (Local Print) or over Camera Server MagicView Setup: on MagicView VA31B install Camera Config.File Kodak 2180 MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=MagicView Wkst.: n Board/Channel=Digital Board 1 Channel 1, Logical Name=mv, n Mod.Name=mv, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=64, Lines=64, Parity=None, Timer=59, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Author: [email protected], Edition: May ´05

24

Siemens workstation MagicView 1000 with LASER IMAGER Products n n n n n n n n n

Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=2 Formatting: Pixel Pitch=12.6582 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=0.0, Auto Study=Off, Console=On 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

25

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER Siemens Camera Server

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

Kpad / Host Control Octopus Adaptor Cable

Kodak 1120 camera Fiber Cable

RS422 37-to-50 pin Digital Adaptor Cable

Kodak MIM 200

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: Magicview could be linked to MIM200 direct (Local Print) or over Camera Server MagicView Setup: on MagicView VA31B install Camera Config.File Kodak 1120 MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=MagicView Wkst.: n Board/Channel=Digital Board 1 Channel 1, Logical Name=mv, n Mod.Name=mv, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=64, Lines=64, Parity=None, Timer=59, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Author: [email protected], Edition: May ´05

26

Siemens workstation MagicView 1000 with LASER IMAGER Products n n n n n n n n n

Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 Formatting: Trim Width Enabled=0, Trim Width Disabled=0 Formatting: Pixel Pitch=12.5 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=0.0, Auto Study=Off, Console=On 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

27

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) Siemens Camera Server

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable

iew 0 DryV 3M 870

Fiber Cable RS422 37-to-50 pin Digital Adaptor Cable

Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations and if HQ by installing HQ into Siemens Camera Config.File MagicView Setup: on MagicView VA31B install Camera Config.File DRY_VIEW MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=MagicView Wkst: n Board/Channel=Digital Board 1 Channel 1, Logical Name=mv, n Mod.Name=mv, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=64, Lines=64, Parity=None, Timer=59, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=0, Interpolation Smooth=0 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Author: [email protected], Edition: May ´05

28

Siemens workstation MagicView 1000 with LASER IMAGER Products n n n n n n n n n n n n n n n n n

Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=12.8205 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8700, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=0, Film Contrast=2 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Wrkstn2a.w87, Auto Study=Off, Console=On, Annotation=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

29

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER Siemens Camera Server

Siemens 25-pin Control Cable

SPCI

SPDI

Siemens 37-pin Data Cable

25-to-25 Null Modem Cable

RS23-to-RS422 25-to-15 pin Converter Box

25cm=10inch Extension (not mandatory) Cable + Kpad / Host Control Octopus Adaptor Cable COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

RS422 37-to-50 pin Digital Adaptor Cable Data 37 pin Kodak MIM 200 Kodak DryView 8100

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM200 v6.1, 8100 v2.4.1 MagicView Setup: on MagicView VA31B install Camera Config.File DRY_VIEW MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=MagicView Wkst: n Board/Channel=Digital Board 1 Channel 1, Logical Name=mv, n Mod.Name=mv, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=64, Lines=64, Parity=None, Timer=59, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=0, Interpolation Smooth=0 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Author: [email protected], Edition: May ´05

30

Siemens workstation MagicView 1000 with LASER IMAGER Products

n n n n n n n n

n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: into Machine Setup Menu set: Tonescaling=Perception LUT at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup Select Destination=8100, Media Size Select=35x43 at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: Orientation=P, Copies=01, Smoothing Type=0, Film Contrast=2 Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On TFT/ULUT=Wrkstn2a.w87, Auto Study=Off, Console=On, Annotation=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

31

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens Magicview via DICOM with Kodak DryView 8300 LASER IMAGER DICOM Network

DryView 8300 Siemens Magicview

Requirements: Siemens Magicview rel. VA32 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8300_Dicom, - DICOM services=PRINT_SCP, aet=8300, port=104, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed e.g., 1=kodakd 3M_DryView_8300_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16 n Contrast=1 n Sharp/Smooth=1 n Film Layout : Format=1 on 1, Mode=Portrait n on 8300 Service Menu into Configure User set: n Modality Group=4 (i.e., LUT=linear-in-Density)

Author: [email protected], Edition: May ´05

32

Siemens workstation MagicView 1000 with LASER IMAGER Products

Siemens MagicView VA32 via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER DICOM Network

Siemens MagicView

Kodak 190 camera

Requirements: Siemens MagicView rel. VA32, 190 rel. 1.7.29 MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K190 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_190_Dicom, - DICOM services=PRINT_SCP, aet=190, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed e.g., 1=kodakd Kodak_190_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

Author: [email protected], Edition: May ´05

33

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network 8700 Plus

Siemens MagicView

Fiber Cable iew 00 DryV 3M 87

Fiber Cable

9410 PACS Link

Requirements: Siemens MagicView 1000 rel. VB32, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into MagicView DICOM Camera Config.File MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8700 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8700_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8700_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView

Author: [email protected], Edition: May ´05

34

Siemens workstation MagicView 1000 with LASER IMAGER Products 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=SCU_DBP, SCU IPAddr=accordingly, SCP=8700 n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

35

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens MagicView

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

9410 PACS Link DryView 8100

Requirements: Siemens MagicView 1000 rel. VB32, 9410 v1.6, 8100 v2.4.1 MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8100 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8100_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8100_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView

Author: [email protected], Edition: May ´05

36

Siemens workstation MagicView 1000 with LASER IMAGER Products 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

37

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER DICOM Network

Kodak DryView 8300 Control 9 pin Siemens MagicView 1000

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8300_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8300_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView

Author: [email protected], Edition: May ´05

38

Siemens workstation MagicView 1000 with LASER IMAGER Products 9410 Setup: n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=MERGE_PRINT_SCU, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

39

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens MagicView 1000

COPCIL board Copper Cable Data 37 pin

Kodak 9410 PACS Link

Requirements: Siemens MagicView 1000 rel.VB33, 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup (using 8600 Config.File): - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8610 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8600_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8600_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Segment Type=anatomical, Scale=ON To eliminate white bands on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Background R=0, G=0, B=0

Author: [email protected], Edition: May ´05

40

Siemens workstation MagicView 1000 with LASER IMAGER Products 9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations=5 n on SCP PRINTER Menu, Registered User: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=6 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT=don’t care n Max.Density=350, Contrast=6, Border Density=0 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, VRTX32=1.08, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma Table=Linear OD, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: May ´05

41

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER DICOM Network

Siemens MagicView

Kodak 160 camera Crossed Network Cable

Kodak MIM 200

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, KELI 160 v6.1 MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K160 Dicom Printer, - modality type=DICOM_PRINTER, - camera type=Kodak_KELI_160_Dicom (or Kodak_MLP_190_Dicom), - DICOM services=PRINT_SCP, aet=160, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd Kodak_KELI_160_Dicom (or 1=kodakd Kodak_MLP_190_Dicom ) - exit/exit (i.e., in order to return to main menu) and reboot MagicView

Author: [email protected], Edition: May ´05

42

Siemens workstation MagicView 1000 with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed

Author: [email protected], Edition: May ´05

43

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER DICOM Network

Siemens MagicView 1000

Kodak 2180 camera Fiber Cable

Kodak MIM 200

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 2180 v2.17H MagicView Setup: - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K2180 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_2180_Dicom, - DICOM services=PRINT_SCP, aet=2180, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd Kodak_2180_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView

Author: [email protected], Edition: May ´05

44

Siemens workstation MagicView 1000 with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed

Author: [email protected], Edition: May ´05

45

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER DICOM Network

Siemens MagicView 1000

Kodak 1120 camera Fiber Cable

Kodak MIM 200

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 1120 v2.40/032 Note: due to a swap of the columns with rows the film size 11x14 is not working MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K1120 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_1120_Dicom, - DICOM services=PRINT_SCP, aet=1120, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd Kodak_1120_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView

Author: [email protected], Edition: May ´05

46

Siemens workstation MagicView 1000 with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed

Author: [email protected], Edition: May ´05

47

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER DICOM Network

Siemens workstation MagicView 1000

Crossed Network Cable

Kodak MIM 200

Kodak DryView 8200

Requirements: Siemens MagicView 1000 rel. VB32B Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K8200 Dicom Printer, - modality type=DICOM_PRINTER, - camera type=Kodak_DryView_8200_Dicom (or Kodak_MLP_190_Dicom), - DICOM services=PRINT_SCP, aet=8200, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8200_Dicom (or 1=kodakd Kodak_MLP_190_Dicom ) - exit/exit (i.e., in order to return to main menu) and reboot MagicView MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

Author: [email protected], Edition: May ´05

48

Siemens workstation MagicView 1000 with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025

Author: [email protected], Edition: May ´05

49

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) DICOM Network

iew 00 DryV 3M 87

Siemens workstation MagicView 1000

Fiber Cable Fiber Cable

Kodak MIM 200

Kodak DryView 8700 Plus

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into MagicView Camera Config.File MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8700 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8700_Dicom, - DICOM services=PRINT_SCP, aet=8700, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8700_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView

Author: [email protected], Edition: May ´05

50

Siemens workstation MagicView 1000 with LASER IMAGER Products MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60

Author: [email protected], Edition: May ´05

51

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER DICOM Network

Siemens workstation MagicView 1000

COPCIL Board Copper Cable

RS422 9-pole Plug Control 9-pin

Data 37-pin

Kodak MIM 200 Kodak DryView 8100

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8100 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8100_Dicom, - DICOM services=PRINT_SCP, aet=8100, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8100_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Author: [email protected], Edition: May ´05

52

Siemens workstation MagicView 1000 with LASER IMAGER Products n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Author: [email protected], Edition: May ´05

53

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8300 LASER IMAGER DICOM Network

Control 9 pin Siemens workstation MagicView 1000

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Kodak DryView 8300

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8300_Dicom, - DICOM services=PRINT_SCP, aet=8300, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8300_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On

Author: [email protected], Edition: May ´05

54

Siemens workstation MagicView 1000 with LASER IMAGER Products n n n n n n n n n n n n n n n n

Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On Formatting: DICOM Annotation Box=On, Req.Size Scale=On Formatting: Req.Size Mix in Row=On, Trim=On Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On Formatting: Req.Image Size=On, Req.Size Mix on Page=On Formatting: True Landscape=On Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 Formatting: Trim Width Enabled=2, Trim Width Disabled=0 Formatting: Pixel Pitch=11.811 Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1

Author: [email protected], Edition: May ´05

55

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) DICOM Network

Kodak DryView 8610 Control 9 pin Siemens Mammomat 3000 Nova MagicView 1000 platform Review Console

COPCIL board Copper Cable Data 37 pin

Kodak MIM 200

Requirements: MagicView 1000 rel.VB33 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup (using 8600 Config.File): - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8610 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8600_Dicom, - DICOM services=PRINT_SCP, aet=8610, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8600_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Segment Type=anatomical, Scale=ON To eliminate white bands on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set: Background R=0, G=0, B=0 MagicView Setup to print images with Dmax=350: - into Service Login (at Unix level), edit density.dat file and set 350 Dmax value for digital-mammo images ie

Author: [email protected], Edition: May ´05

56

Siemens workstation MagicView 1000 with LASER IMAGER Products

cd /home/cs_root/data/lut vi density.dat change the following 6 lines as follows: 0 DX 350 0 CR 350 0 MG 350 0 CT 350 (this line needed when Ref.Test Patterns eg SMPTE are used) 0 OT 350 0 DEFAULT 350 reboot MagicView MagicView Setup to print with Image Data lutted by MV, not lutted by 8610 (setup: Gamma=Lin.in Density, C=6, Modality Group=1): - into Service Login (at Unix level), edit LUT^CR.def file and modify it with following exp / density value pairs ie cd /home/cs_root/data/lut vi LUT^CR.def change the lines as follows: 0 20 25 31 51 42 76 56 102 73 127 93 153 115 178 143 204 182 229 230 255 300 copy LUT^CR.def file into the LUT^CT.def, LUT^MG.def and LUT^DX.def files (ie LUT^CR.def is the file with LUT applied by MV to image data and is copied into LUT^CT.def, LUT^MG.def and LUT^DX.def to be sure to have same LUT applied by MV to image data no matter which Modality-tag have the image data) ie cd /home/cs_root/data/lut cp LUT^CR.def LUT^CT.def (needed when Ref. Test Patterns eg SMPTE used) cp LUT^CR.def LUT^MG.def cp LUT^CR.def LUT^DX.def reboot MagicView MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 Author: [email protected], Edition: May ´05

57

Siemens workstation MagicView 1000 with LASER IMAGER Products n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600),Header/Line,Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=nova n Print Priority=Normal (Always=N), Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1

Author: [email protected], Edition: May ´05

58

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak DryView 8900 LASER IMAGER DICOM Network

Siemens MagicView 1000 workstation

Kodak DryView 8900

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) MV Setup (using Kodak 8200 or 3M M969 HQ Config.file, easier config.): - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, - modality type=DICOM_PRINTER, camera type= Kodak_DryView_8200_Dicom, - DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter nbr of the printer to be installed eg 1=kodakd Kodak_DryView_8200_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView MagicView Setup (creating 8900 by modifying files, only if True Size needed): - into Service Login (at Unix level) in /home/cs_root/data/camera directory dbp_format.dat and dbp_camera_types.dat files needs to be edited by adding the DV8900 matrixes ie cd /home/cs_root/data/camera vi dbp_format.dat add the following lines: Kodak_DryView_8900_Dicom 14x17 350.75x427.03 4488x5464 325 Kodak_DryView_8900_Dicom 14x14 350.75x350.75 4488x4488 325 Kodak_DryView_8900_Dicom 11x14 274.63x350.75 3514x4488 325 Kodak_DryView_8900_Dicom 10x12 248.84x299.17 3184x3828 325 Kodak_DryView_8900_Dicom 8x10 197.57x248.84 2528x3184 325 cd /home/cs_root/data/camera vi dbp_camera_types.dat

Author: [email protected], Edition: May ´05

59

Siemens workstation MagicView 1000 with LASER IMAGER Products add the following line: Kodak_DryView_8900_Dicom -

reboot MagicView

-

into Service Login (at Unix level), logged as sit install from main menu do: edit/config/create (ie to configure the DICOM printer as separate node) node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, modality type=DICOM_PRINTER, camera type=Kodak_DryView_8900_Dicom, DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly RETURN, exit, exit (ie in order to return to main menu) from main menu do: install/net exit (ie in order to return to main menu) and reboot MagicView from main menu do: hc_install/install devices/install (ie to select the printer) enter number of the printer to be installed eg 1=kodakd Kodak_DryView_8900_Dicom exit/exit (ie in order to return to main menu) and reboot MagicView at this point only a default-Layout ie printing format is available for 8900 other Layouts ie other printing formats could be manually genarated by using the Layout-Editor which is present inside MagicView application otherwise other Layouts ie other printing formats could be automatically generated deriving them from the Layouts of an already existing camera to automatic generate other Layouts ie other printing formats from main menu do: hc_install/modify/copy layouts input=Kodak_KELP_2180_Dicom output=Kodak_DryView_8900_Dicom reboot MagicView

-

-

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 Author: [email protected], Edition: May ´05

60

Siemens workstation MagicView 1000 with LASER IMAGER Products n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=Y), Contrast=2 (Always=Y) n Smoothing Type=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mv

Author: [email protected], Edition: May ´05

61

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak DryView 8150 LASER IMAGER DICOM Network

Siemens MagicView 1000 workstation

Kodak DryView 8150

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) MV Setup (using Kodak 8200 or 3M M969 HQ Config.file, easier config.): - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8150 Dicom Printer, - modality type=DICOM_PRINTER, camera type= Kodak_DryView_8200_Dicom, - DICOM services=PRINT_SCP, aet=DV8150, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter nbr of the printer to be installed eg 1=kodakd Kodak_DryView_8200_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView MagicView Setup (creating 8150 by modifying files, only if True Size needed): - into Service Login (at Unix level) in /home/cs_root/data/camera directory dbp_format.dat and dbp_camera_types.dat files needs to be edited by adding the DV8150 matrixes ie cd /home/cs_root/data/camera vi dbp_format.dat add the following lines: Kodak_DryView_8150_Dicom 14x17 346.70x421.07 4438x5390 325 Kodak_DryView_8150_Dicom 14x14 346.70x344.82 4438x4414 325 Kodak_DryView_8150_Dicom 11x14 268.73x346.70 3440x4438 325 cd /home/cs_root/data/camera vi dbp_camera_types.dat add the following line: Kodak_DryView_8150_Dicom

Author: [email protected], Edition: May ´05

62

Siemens workstation MagicView 1000 with LASER IMAGER Products

-

reboot MagicView

-

into Service Login (at Unix level), logged as sit install from main menu do: edit/config/create (ie to configure the DICOM printer as separate node) node name=kodakd (max 6 chars), component name=DV8150 Dicom Printer, modality type=DICOM_PRINTER, camera type=Kodak_DryView_8150_Dicom, DICOM services=PRINT_SCP, aet=DV8150, port=5040, IPaddr=accordingly RETURN, exit, exit (ie in order to return to main menu) from main menu do: install/net exit (ie in order to return to main menu) and reboot MagicView from main menu do: hc_install/install devices/install (ie to select the printer) enter numbr of the printer to be installed eg 1=kodakd Kodak_DryView_8150_Dicom exit/exit (ie in order to return to main menu) and reboot MagicView at this point only a default-Layout ie printing format is available for 8150 other Layouts ie other printing formats could be manually genarated by using the Layout-Editor which is present inside MagicView application otherwise other Layouts ie other printing formats could be automatically generated deriving them from the Layouts of an already existing camera to automatic generate other Layouts ie other printing formats from main menu do: hc_install/modify/copy layouts input=Kodak_KELP_2180_Dicom output=Kodak_DryView_8150_Dicom reboot MagicView

-

-

8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: Author: [email protected], Edition: May ´05

63

Siemens workstation MagicView 1000 with LASER IMAGER Products n n n n n n n n n n n n n

Negotiate Presentation LUT=No, Negotiate Color Print=No, TFT Set Name=Wrkstn2a.w87 (Always=Y) Contrast=1 (Always=Y), Smoothing Type=0 (Always=Y) Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) Image Polarity=Normal (Always=N) NeventReports=No (Always=Y), Warnings=Yes Print Priority=Normal (Always=N), Border=3.99 (Always=N) 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, Modality ID=No, Annotation Override=No, Density Patch=No Image Resizing=Minify/Scale (Always=N), Text Box Location=None, Source ID=mv

Author: [email protected], Edition: May ´05

64

Siemens workstation MagicView 1000 with LASER IMAGER Products

MagicView 1000 via DICOM with Kodak Color Medical Imager 1000 DICOM Network

Siemens MagicView 1000 workstation

Kodak CMI 1000

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=CMI1000 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8300_Dicom, - DICOM services=PRINT_SCP, aet=CMI1000, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8300_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults) n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality: n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y)

Author: [email protected], Edition: May ´05

65

Siemens workstation MagicView 1000 with LASER IMAGER Products n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No n Save Changes and Exit

Author: [email protected], Edition: May ´05

66