Server-config-notes (1).docx

  • Uploaded by: Jovan Christian Olan
  • 0
  • 0
  • December 2019
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Server-config-notes (1).docx as PDF for free.

More details

  • Words: 705
  • Pages: 5
ROUTER CONFIGURATION 1. Reset router 2. Type 192.168.1.1 to the address bar 3. Type admin for log in and password 4. Select wireless setup/Wlan 5. Change SSID and Password (save and reboot) 6. Click save and close the configuration 7. Try to access the wifi connection with your mobile phone PEER TO PEER NETWORK CONFIGURATION (FOR SERVER and CLIENT) 1. Right click my computer 2. Click properties 3. Click Change settings 4. Click change 5. Select COMPUTER NAME (type SERVER/CLIENT) 6. Select WORKGROUP NAME ( type CSS) 7. Click Ok, then restart 8. Click network icon on desktop/ My computer then network 9. Select turn on network discovery and file sharing 10. Click yes turn on network discovery in all public networks 11. Press F5 for refresh (SERVER and CLIENT) FOR SERVER ONLY Find the LAN Icon on taskbar Then click the LAN Icon on taskbar Open the Network and Sharing Center Click the Local Area Connection Click the Properties Click the Internet Protocol Version 4 (TCP,IPv4) Click Properties Click the Use the following IP Address: IP Address : 192.168.1.2 Subnet Mask:

255.255.255.0

Click Use the following DNS Server Addresses Preferred DNS Server:

192.168.1.2

Then OK Click Start Menu Type DCPROMO.EXE on search box Then click dcpromo.exe Then Next Then Next DNS CONFIGURATION Click the Create a new domain in a new forest: Then Next Then type CSS.COM Then Next Select on forest functional level: Windows Server 2008 R2 Then Next Then Next Then Yes Then Next Password:

Admin123

Confirm:

Admin123

Then Next Then Next Then check Reboot on completion and wait until your pc restart. Find the LAN Icon on taskbar Then click the LAN Icon on taskbar Open the Network and Sharing Center Click the Local Area Connection Click the Properties

Click the Internet Protocol Version 4 (TCP,IPv4) Click Properties Click Use the following DNS Server Addresses Preferred DNS Server:

Change 127.0.0.1 to 192.168.1.2

Then OK DHCP INSTALLATION Click the Server Manager from the Toolbar Click Roles, Click Server Roles Click Add Roles Then Next Click the DHCP Server Then Next Then Next Then Next Click Validate Then Next Then Next Then click Add Scope Name:

pcnetworking

Starting IP Address:

192.168.1.2

Ending IP Address:

192.168.1.15

Then Ok Then Next Then Next Click Validate Then Next Then Next Click Install Then Close NOTE: Restart SERVER and CLIENT PC (manually)

CREATING USER ACCOUNTS Click Start Menu Click Administrative Tools Click Active Directory Users and Computer Click “+” CSS.COM Double click Users Right click “Users” then “New” Choose “User” First Name:

Alden

Last Name:

Richard

Full Name:

Initial: S.

Alden S. Richard

User Login Name: [email protected] Then Next Password:

Admin123

Confirm Password: Admin123 Uncheck the “User must change password in next login” Check the “Password never expires” Remember to Capitalize the First Letter of your Password Then Next Then Finish Then Close JOINING CLIENT ON THE DOMAIN NETWORK (WINDOWS 7) CLIENT PC (FOR CLIENT ONLY) Click Start Menu Right click Computer Click Properties Click “Change Settings” Click Change

REMOTE DESKTOP CONNECTIONS

Select the Domain

1. Right click My Computer then Click

Type under Domain “CSS.COM”

Properties

Then OK

2. Click Remote Settings 3.Select Allow Connections from computers

User Name:

Administrator

running any versions of remote desktop ,

Password:

Admin123

Then OK 4. Click Start Menu then type Remote

Then OK

Desktop Connections - press enter

Then OK

5. Click on search box then type the IP

Then Close

address of server/client 192.168.1.2

Then Restart Now

(or type SERVER/CLIENT) 6. Click Connect and please wait for the

Ctrl + Alt + Delete

process… click YES

Click Switch User

(note: when remoting client to server choose

Click Other Users

USE ANOTHER ACCOUNT)

Username:

aldenrichard

Password:

Admin123

7. Administrator – username Admin123 – password THEN CLICK OK (note: when remoting server to client choose ADMINISTRATOR – then Admin123 as password)

NOTE: CHANGE THE CLIENT SETTINGS BACK INTO WORKGROUP DELETION OF CONFIGURATION REMOVING ROLES Type DCPROMO.EXE on search box

Click Server Manager

Then Next

Click Roles

Check Delete

Click Remove Roles

Then Next

Then Next

Check Delete Password :Admin123 Confirm Passsword: Admin123

Uncheck - Active Directory Domain Services - DHCP - DNS SERVER

Then Next

Then Next

Then Next

Click Remove

Check the Reboot

Then Close

Yes to Restart pc

Related Documents


More Documents from "Kevin Bran"