Rotocone Vacuum Dryers

Rotocone Vacuum Dryers

In direct heat rotary dryers a continuous feed of wet particulate material is dried by contact with heated air, while being transported along the interior of a rotating cylinder, with the rotating shell acting as

rotary dryers in co-current (parallel) and counter-current operation. In the former, the wet material is exposed to the hottest air, which enables heat sensitive or sticky materials to be dried successfully. In the counter-current operation dried material is exposed to the hottest air helping to achieve very low moisture content. The

Features : •

All contact parts of made out of SS 316 / SS 316 L quality Material in GMP Models and Mild steel externals with SS 304 Internals in standard Models.

•

Shell Materials are with SS 316 / SS 316 L for GMP Models and SS 304 for Non – GMP Model.

•

Jacket Materials are made out of SS 304 for GMP Models and MS for Non – GMP Models.

•

Cladding is made out of SS 304 for GMP Model and MS For NonGMP Model .

•

Internal Finishing will be Mirror polish, and External finish will be Mat finish.

•

Cyclone Separators is Provided for all Models.

•

Condenser and condensate Receivers are provided for all Models.

•

Validation ports and nitrogen purge Nozzles are provided

•

Can be designed to customers specifications requirements.

hot gases may enter the dryer at very high temperature.

Optional: •

Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid. ( for Temperature requirements above 95º C )

32

Bulk Drug Equipment

the conveying device and stirrer. We offer