Remote Desktop
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Remote Desktop as PDF for free.
More details
- Words: 307
- Pages: 2
How to change the listening port for Remote Desktop Article ID : 306759 Last Review : January 31, 2007 Revision : 2.2 This article was previously published under Q306759 Important This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base: 256986 (http://support.microsoft.com/kb/256986/) Description of the Microsoft Windows Registry
INTRODUCTION
S
Sw
This article describes how to change the port that Remote Desktop listens on. Note The Remote Desktop Connection Client for the Mac supports only port 3389. 3389 is the default port.
MORE INFORMATION R You can use the Remote Desktop feature in Microsoft Windows XP Professional to connect to your
O
computer from another remote computer. Warning The Remote Assistance feature in Microsoft Windows XP may not work correctly if you change the listening port. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 307711 (http://support.microsoft.com/kb/307711/) Remote Assistance invitation file does not contain correct port number To change the port that Remote Desktop listens on, follow these steps. Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk. 1. Start Registry Editor. Locate and then click the following registry subkey: 2. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\ WinStations\RDP-Tcp\PortNumber 3. On the Edit menu, click Modify, and then click Decimal. Note When
P
Manage Your Profile |Contact Us © 2007 Microsoft Corporation. All rights reserved. Terms of Use |Trademarks |Privacy Statement
INTRODUCTION
S
Sw
This article describes how to change the port that Remote Desktop listens on. Note The Remote Desktop Connection Client for the Mac supports only port 3389. 3389 is the default port.
MORE INFORMATION R You can use the Remote Desktop feature in Microsoft Windows XP Professional to connect to your
O
computer from another remote computer. Warning The Remote Assistance feature in Microsoft Windows XP may not work correctly if you change the listening port. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 307711 (http://support.microsoft.com/kb/307711/) Remote Assistance invitation file does not contain correct port number To change the port that Remote Desktop listens on, follow these steps. Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk. 1. Start Registry Editor. Locate and then click the following registry subkey: 2. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\ WinStations\RDP-Tcp\PortNumber 3. On the Edit menu, click Modify, and then click Decimal. Note When
P
Manage Your Profile |Contact Us © 2007 Microsoft Corporation. All rights reserved. Terms of Use |Trademarks |Privacy Statement
Related Documents
Remote Desktop
April 2020 31
Remote Desktop
November 2019 17
Remote Desktop
May 2020 10
Remote Desktop
May 2020 14
Lctn0010 Remote Desktop Example
December 2019 15