Quick Start Guide
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Quick Start Guide as PDF for free.
More details
- Words: 599
- Pages: 8
XPack Quick Start Guide
The Age of
Web-Centric Computing
Included in the box 1. XPack 2. Stand
3. Keyboard 4. Mouse 2
5. Power adapter (with AC cable)
1
6. Four M4 mm x 12 mm screws in bag for VESA bracket installation 7. VESA bracket 8. VGA cable
9. Ethernet cable
10. Wireless antenna (if Wi-Fi SKU) 11. Quick user and installation guide 3
6 5
4
8
7
9
10
11
1 Mount XPack
latch
Mounting using VESA bracket a.
b.
keyholes
Using the four screws supplied, mount the VESA bracket to the back of the monitor (See Fig. A)
Kensington lock
Connect Keyboard, Ethernet, VGA and power cables to XPack (Fig. B)
mounting holes
standoffs
mounting screws (M4 mm x 12 mm)
Figure A
Figure B
Figure C
Note: please use the screws included in the package. Use of longer screws may cause damage to the monitor.
c. d. e.
Align the four bottom keyholes on the back of the XPack with the four standoffs on the VESA bracket (Fig. C) Slide down XPack until fully seated (Fig. D) Proceed to Step 2
Figure D
Mounting using XPack stand If VESA mount on the monitor is not available, you can use the stand to mount the XPack vertically. Note that placing the XPack horizontally on the table without the stand may overheat the unit.
Follow these steps: a. b. c.
d. e.
Thread the Keyboard, Ethernet, VGA and power cables through the stand opening (Fig. A) Connect the cables to the XPack (Fig. B)
Align the two bottom keyholes on the back of the XPack with the two standoffs on the stand (Fig. B) Slide XPack down until fully seated (Fig. C) Proceed to Step 2
Figure A
standoffs
Figure B
Figure C
2 Connect to monitor
Locate VGA connector in the back of the monitor and connect the other end of the VGA cable, then fasten the screws.
3 Connect mouse to keyboard
Locate USB port on the left or right side of the keyboard and connect the mouse to it. Note, that the mouse will function on either port.
4 Network connections
Locate Ethernet wall jack and plug the other end of the Ethernet cable into it.
5 Connect power
Locate AC wall outlet and plug the AC cord.
6 Power it up
Proceed to power up the unit by pressing the power button. You should see alternating yellow-green LED activity, at the end of which the LED should settle in the green state.
Power button Power LED
7 Register XPack
When the unit first comes up, a dialog box appears asking you to attach your XPack to the account you’ve created.
S/N: Account: Group: Username: Password:
Register XPack
I want to use XPack without associating it with an accout.
* Please note that without associating your XPack with an account, you will not be able to manage it remotely. If you haven’t created an account yet, you can do so at http://www.moderro.com/NewAccountWiz/
Reference View
Wi-Fi antenna
On/Off Microphone
Power LED
Headphone
Reset
Speakers USB ports
Kensington slot
12V DC
Power input
DVI
DVI port
VGA
VGA port
LAN 100/1000
Keyboard port Ethernet port
ON/OFF key
Mouse cord
USB
USB
Moderro key
Important CAUTION: Danger of explosion if battery is incorrect replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. WARRANTY VOID IF SEAL IS BROKEN
Resources Troubleshooting:
XPack Remote Management Guide: XPack User Interface Guide: XPack Applications:
www.moderro.com/XPack/troubleshooting www.moderro.com/XPack/remote www.moderro.com/XPack/UI www.moderro.com/XPack/applications
www.moderro.com
© Copyright 2008 Moderro Technologies. All rights reserved.
The Age of
Web-Centric Computing
Included in the box 1. XPack 2. Stand
3. Keyboard 4. Mouse 2
5. Power adapter (with AC cable)
1
6. Four M4 mm x 12 mm screws in bag for VESA bracket installation 7. VESA bracket 8. VGA cable
9. Ethernet cable
10. Wireless antenna (if Wi-Fi SKU) 11. Quick user and installation guide 3
6 5
4
8
7
9
10
11
1 Mount XPack
latch
Mounting using VESA bracket a.
b.
keyholes
Using the four screws supplied, mount the VESA bracket to the back of the monitor (See Fig. A)
Kensington lock
Connect Keyboard, Ethernet, VGA and power cables to XPack (Fig. B)
mounting holes
standoffs
mounting screws (M4 mm x 12 mm)
Figure A
Figure B
Figure C
Note: please use the screws included in the package. Use of longer screws may cause damage to the monitor.
c. d. e.
Align the four bottom keyholes on the back of the XPack with the four standoffs on the VESA bracket (Fig. C) Slide down XPack until fully seated (Fig. D) Proceed to Step 2
Figure D
Mounting using XPack stand If VESA mount on the monitor is not available, you can use the stand to mount the XPack vertically. Note that placing the XPack horizontally on the table without the stand may overheat the unit.
Follow these steps: a. b. c.
d. e.
Thread the Keyboard, Ethernet, VGA and power cables through the stand opening (Fig. A) Connect the cables to the XPack (Fig. B)
Align the two bottom keyholes on the back of the XPack with the two standoffs on the stand (Fig. B) Slide XPack down until fully seated (Fig. C) Proceed to Step 2
Figure A
standoffs
Figure B
Figure C
2 Connect to monitor
Locate VGA connector in the back of the monitor and connect the other end of the VGA cable, then fasten the screws.
3 Connect mouse to keyboard
Locate USB port on the left or right side of the keyboard and connect the mouse to it. Note, that the mouse will function on either port.
4 Network connections
Locate Ethernet wall jack and plug the other end of the Ethernet cable into it.
5 Connect power
Locate AC wall outlet and plug the AC cord.
6 Power it up
Proceed to power up the unit by pressing the power button. You should see alternating yellow-green LED activity, at the end of which the LED should settle in the green state.
Power button Power LED
7 Register XPack
When the unit first comes up, a dialog box appears asking you to attach your XPack to the account you’ve created.
S/N: Account: Group: Username: Password:
Register XPack
I want to use XPack without associating it with an accout.
* Please note that without associating your XPack with an account, you will not be able to manage it remotely. If you haven’t created an account yet, you can do so at http://www.moderro.com/NewAccountWiz/
Reference View
Wi-Fi antenna
On/Off Microphone
Power LED
Headphone
Reset
Speakers USB ports
Kensington slot
12V DC
Power input
DVI
DVI port
VGA
VGA port
LAN 100/1000
Keyboard port Ethernet port
ON/OFF key
Mouse cord
USB
USB
Moderro key
Important CAUTION: Danger of explosion if battery is incorrect replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. WARRANTY VOID IF SEAL IS BROKEN
Resources Troubleshooting:
XPack Remote Management Guide: XPack User Interface Guide: XPack Applications:
www.moderro.com/XPack/troubleshooting www.moderro.com/XPack/remote www.moderro.com/XPack/UI www.moderro.com/XPack/applications
www.moderro.com
© Copyright 2008 Moderro Technologies. All rights reserved.
Related Documents
Quick Start Guide
May 2020 13
Quick Start Guide
November 2019 27
R35 Quick Start Guide
June 2020 6
Msc.fatigue Quick Start Guide
May 2020 37
P5 Quick Start Guide
December 2019 32