Qtp Questions

Q1. 'Browser navigation timeout' is in which tab of Test Settings (File->Settings) window. A)Properties B)Resources C)Web D)WebSettings Q2. How many tabs are there in Test Settings (File->Settings) window A)7 B)6 C)5 D)8 Q3. Identify the tabs in the Test Settings (File->Settings) window A) Properties, Run, Resources, Parameters, Environment, Web, Recovery B) Properties, Run, Resources, Parameters, Environment, WebSettings,Recovery C) Properties, Run Options, Resources, Parameters, Environment, Web,Recovery D) Properties, Run, Resources, Input Parameters, Environment, Web, Recovery Q4. 'Generate Script' is in which tab of Test Settings (File>Settings)window A)Properties B)Web C)Resources D)Recovery Q5. The following are the four main columns in the Keyword view A) Item, Operation, Value, Comments B) Item, Operation, Value, Documentation C) Item, Operation, Property, Documentation D) Number, Operation, Value, Documentation Q6. For each object and method in an Expert View statement,

acorresponding row exists in the Keyword View. A)True B)False C) There is a problem with the statement. D) None of above Q7. You can work on one or several function libraries at the same time. A) True B) False Q8. You can insert additional steps on the test objects captured in the Active screen after the recording session. A) True B) False Q9. The Active Screen enables you to parameterize object values andinsert checkpoints A) True B) False Q10. A QTP user can increase or decrease the active screen informationsaved with the test. A) True B) False Q11. The Information pane provides a list of............. in the test: A) Semantic errors B) Syntax errors C) Common errors D) Logic errors Q12. When we switch from Expert view to the Keyword view, QTPautomatically checks for syntax errors in the test and shows them in theinformation pane. A) True B) False

Q13. If the information pane is not open, QTP automatically opens it incase a syntax error is detected. A)True B)False Q14. ..................... provides a list of the resources that arespecified in your test but cannot be found. A)Missingpane B) Missing Resources pane C) Resources pane D) Missing Items pane Q15. Whenever you open a test or a function library, QTP automaticallychecks for the availability of specified resources. A)True B)False Q16. The Data Table does not assists you in parameterizing your test. A)True B)False Q17. Tabs in the Debug Viewer pane are: A) Watch, Variables, Debug B) Watch, Data, Command C) Watch, Variables, Command D) View, Variables, Command Q18. ............... tab enables you to view the current value of anyvariable or VBScript expression. A)Watch B)VIew C)Locate D)Current Q19. The .... tab displays the current value of all variables that havebeen recognized up to the last step performed in the run session.

A)View B)Variables C)Locate D)Current Q20. The .........tab enables you to run a line of script to set ormodify the current value of a variable or VBScript object in your testor function library. A)View B)Variables C)Command D)Current Q21. Panes in QTP can have one of the following states—docked or floating. A)True B)False Q22. Which of the following statement is True: A) QuickTest enables you to open and work on one test at a time B) QuickTest enables you to open and work on two tests at a time C) QuickTest enables you to open and work on predefined number of testsat a time D) QuickTest enables you to open and work on nine test at a time Q23. Which of the following statement is True: A) You can open and work on two function libraries simultaneously B) You can open and work on multiple function libraries simultaneously C) You can open and work on nine function libraries simultaneously D) You can open and work on one function library at a time Q24. You can open any function library, regardless of whether it isassociated with the currently open test. A)True B)False

Q25. You can work with multiple documents (test, component, orapplication area, function libraries) using the...... dialog box A)Panes B)Display C)Show D)Windows Answers:-->

Q1. How many tabs are there in Test Settings (File>Settings) window A) 5 B) 6 C) 7 D) 8 Q2. 'Browser navigation timeout' is in which tab of Test Settings (File->Settings) window? A) Properties B) Resources C) Web D) Web Settings Q3. Identify the tabs in the Test Settings (File->Settings) window A) Properties, Run, Resources, Parameters, Environment, Web, Recovery B) Properties, Run, Resources, Parameters, Environment, Web Settings,Recovery C) Properties, Run Options, Resources, Parameters, Environment, Web, Recovery D) Properties, Run, Resources, Input Parameters, Environment, Web, Recovery Q4. 'Generate Script' is in which tab of Test Settings (File>Settings) window A) Properties B) Resources C) Web D) Recovery Q5. For each object and method in an Expert View statement, a corresponding row exists in the Keyword View. A) True B) False C) There is some problem with the statement.

D) None of above Q6. The following are the four main columns in the Keyword view A) Item, Operation, Value, Comments B) Item, Operation, Value, Documentation C) Item, Operation, Property, Documentation D) Number, Operation, Value, Documentation Q7. You can work on one or several function libraries at the same time. A) True B) False Q8. You can insert additional steps on the test objects captured in the Active screen after the recording session. A) True B) False Q9. The Active Screen enables you to parameterize object values and insert checkpoints A) True B) False Q10. A QTP user can increase or decrease the active screen information saved with the test. A) True B) False Q11. The toolbar enables you to view the details of an individual action or the entire test flow is: A. Testing toolbar B. None of the above C. Action toolbar D. Test Pane Q12. The key that is used to Start/End analog recording mode ?

A. F3 B. SHIFT+ALT+F3 C. CTRL+SHIFT+F3 D. F10 Q13. QuickTest supports virtual object for analog or lowlevel recording. A. False B. True Q14. To use a specific property to identify your object, but that property is not listed in the properties list. Then how do you identify that object? A. Add the specific property to the list B. Use the Default property C. Use some other property to identify your object Q15. The checkpoint used to check the alt attribute exists for all relevant objects (such as images) is A. Database CheckPoint B. Accessibility checkpoint C. Bitmap checkpoint D. Standard checkpoint Q16. Bitmap checkpoint is supported in VB environment. A. True B. False Q17. Can we parameterize the checkpoints properties? A. No B. Yes Q18. What is the shortcut key that is used for a Standard Checkpoint? A. F12 B. F2 C. F10 D. F7

Q19. Can we change name of checkpoint? A. No B. Yes Q20. To compare the values of the specified property during a run session with the values stored for the same test object property within the test. A. Checkpoint B. All the above C. Output Value D. Compare the object property Q21. You will use which recording mode for an object not recognized by QuickTest? A. Low-Level Recording Mode B. Normal recording Mode C. Analog Mode Q22. The statement that calls the recorded analog file is: A. RunAnalog B. CallAnalog C. ExecuteAnalog Q23. An action can be called by other tests or actions is: A. Call Action B. Split Action C. Reusable Action Q24. You can replace the page in your Active Screen tab: A. False B. True Q25. QuickTest adds a checkpoint statement in the Expert View as: A. Check Checkpoint B. Checkpoint

Q26. A Checkpoint checks that a text string is displayed within a defined area in a Windows application is: A. Accessibility B. Text Area C. Standard D. Text Q27. In ACTIVE X environment, an ACCESSIBILITY checkpoint is supported? A. No B. Yes Q28. Can we get the execution time for an action in a Test? A. Yes B. No Q29. Can we add external library files in QTP? 1. No 2. Yes Q30. The method used to get data from HTML Table is A. GetData(Row,Col) B. GetRowValue(Rowid,Colname) C. GetCellData (Row,Col)

Q1. The Command used to insert the transactions in test is: A. StartTransaction(Name�), EndTransaction(Name�)B . Services.StartTransaction "Name", Services.EndTransaction "Name" C. StartTransaction.services "Name�, EndTransaction.services "Name" Q2. A step in which one or more values are captured at a specific point in your test and stored for the duration of the run session is: A. Output Value B. Checkpoints C. Active Screen Q3. QTP can detects an application crash and activate a defined recovery scenario to continue the run session. A. True B. false Q4. In Batch Test process, the test list are saved in file format as: A. *.mtb B. *.mts C. *.mbt D. *.mtr Q5. The command used to invoke other application from QTP: A. InvokeApplication B. SystemUtil.Run C. Run D. Both b & c E. Both a & b Q6. The command used to retrieve data from excel sheet is A. Set ab = Connection("srcfilepath ") , Set ws =

ab.getdata(sheetid) B. Set ab = CreateObject("srcfilepath ") , Set ws = ab.getsheet(sheetid) C. Set ab = GetObject("srcfilepath") , Set ws = ab.worksheets(sheetid) Q7. The method that explicitly activates the recovery scenario mechanism is: A. recovery.activate B. enable C. recovery.enable D. activate Q8. The method used for sending information to the test results is: A. Reporter.log() B. Reporter.reportevent() C. Reporter.msgbox() D. Reporter.report() Q9. To terminate an application that is not responding we use: A. SystemUtil.terminate B. SystemUtil.Stop C. SystemUtil.CloseProcessByName Q10. The recovery mechanism does not handle triggers that occur in the last step of a test: A. false B. True Q11. We can add Test object methods, function calls into the Test using: A. Function generator B. Step generator C. Object repository Q12. The method that adds to the test while implementing

synchronization is: A. Synchronize B. Wait C. WaitProperty D. Pause Q13. The mechanism used to identify objects during run session is: A. Recovery scenario B. Smart identification C. Handling object Q14. Post-recovery test run options specifies: A. how to continue the run session after QTP identify the event B. errors while running C. recovery scenario during a run session Q15. The action that can be called multiple times by the test as well as by other tests is called: A. non-reusable action B. Reusable action C. External action Q16. The command used to connect with Database is: A. Createobject(connectivity name�) B. dbconnect(connectivity name) C. open(connectivity name) D. None of the above Q17. The method used to retrieve the folders is: A. FileSystemObject.Getfolder() B. FileSystemObject.selectfolder() C. FileSystemObject.retrievefolder() Q18. The method used to compare 2 XML files is: A1. XMLfile1.compare(XMLfile2) B. XMLcompare(file1,file2) C. compare(XMLfile1,XMLfile2)

Q19. The QTP script files are stored in the extension of: A. *.mts B. *.usr C. *.mtr D. *.vbs Q20. The method used to register the user-defined function with test object is: A. setFunc() B. RegisterUserFunc() C. RegisterFunc() Q21. The method used to open the specified URL in a browser is: A. openURL() B. navigateURL() C. navigate() Q22. The 3 Parameter types available in data driver is: A. DataTable,Environment,Random number B. DataTable,random number,unique C. environment,string,numeric Q23. The method added to the test while parameterizing is: A. get Data (variable, dtGlobalSheet) B. get DataTable(variable, dtGlobalSheet) C. Set Data(variable, dtGlobalSheet) D. Set DataTable(variable, dtGlobalSheet) Q24. The length of the array can be get by the method: A. length(array) B. ubound(array) C. count(array) Q25. The method used to get the count value of list box or combo box is:

A. GetItemsCount B. GetCount C. GetItemCount Q26. To retrieve the current the objects in your application during the run session: A. GetVisibleText B. GetROProperty C. SetROProperty D. GetTOProperty Q27. The list of test objects and their properties and values are stored in the: A. Object Repository B. Object Identification Q28. The method used to continue the test execution after getting run-time error is: 1. On Error Resume Next 2. On Error Raise Next 3. On Error Next