Pspice Report New

Title

: Electrical Circuit Simulation using PSpice

Objectives

:

1. To analyse DC circuit using PSpice software 2. To analyse AC circuit using PSpice software

Equipments : 1. PSpice software 2. Computer

Procedures

:

A. DC circuit analysis

a. Series Circuit

Figure 1 1. The circuit is shown in Figure 1 is chosen. 2. The voltages for R1, R2 and R3 are calculated.

3. Analysis the circuit by PSpice software and verify the calculation voltages. 4. Discuss the observation.

b. Parallel Circuit

Figure 2 1. The circuit is shown in Figure 2 is chosen 2. The currents through R1, R2 and R3 are calculated 3. Analysis the circuit by PSpice software and verify the calculation currents 4. Disscuss the observation.

c. Two Sources Circuit

Figure 3 1. The circuit in Figure 3 is chosen. 2. The current through R2 is calculated. 3. Analysis the circuit by PSpice software and verify the calculation current. 4. Discuss the observation.

B. AC circuit analysis

a.

Results

:

A. DC circuit analysis a. Series Circuit i.

Calculation Voltages V1=R1RTVS=100Ω1000Ω10 V=1 V V2=R2RTVS=220Ω1000Ω10 V=2.2 V V3=R3RTVS=680Ω1000Ω10 V=6.8 V

ii. PSpice analysis

V1=10 V-9 V=1 V V2=9 V-6.8 V=2.2 V V3=6.8 V-0 V=6.8 V

b. Parallel Circuit i.

Calculation Currents

I1= VsR1=20 V1.0 kΩ=20 mA I2= VsR2=20 V2.2 kΩ=9.09 mA I3= VsR3=20 V560 kΩ=35.7 mA

ii. PSpice analysis

I1=2 × 10-2=20 mA I2=9.091 × 10-3=9.09 mA I3=3.571 × 10-2=35.7 mA

c. Two Sources Circuit i.

Calculation current through R2

Step 1 : Consider 10 V alone RTs1=R1+ R32=100Ω+50Ω=150Ω ITs1= Vs1RTs1= 10V150V=66.7 mA I2s1=R3R2+R3 ITs1=100Ω200Ω66.7 mA=33.3 mA

Step 2 : Consider 5 V alone RTs2=R3+ R12=100Ω+50Ω=150Ω ITs2= Vs2RTs2= 5V150V=33.3 mA I2s2=R1R1+R2 ITs2=100Ω200Ω33.3 mA=16.7 mA

Step 3 : Add the values obtain from the both above steps I2=I2s1+ I2 s2= 33.3 mA+16.7 mA=50 mA

ii. PSpice analysis

I2=5 × 10-2 =50 mA

B. AC circuit analysis

Discussion : Suggestions for further work in the future: 1. Give the lab manual for convenience in learning. 2. Do not use red maker while writing on the whiteboard because it is unclear. 3. Use LCD projector to show how to do the experiment. 4. Use microphone to give the explanation. Conclusion : 1. The DC circuit analysis is verified by PSpice Software. 2. The AC circuit analysis is verified by PSpice Software. 3. The PSpice Software can be used in both DC and AC circuit analysis.