Pressure Sensor - 2zps004704324
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Pressure Sensor - 2zps004704324 as PDF for free.
More details
- Words: 495
- Pages: 1
Pressure Sensor - 2ZPS004704324 2.50"
0-5“ H2O Pressure Range - 5 VDC Operation
3.92 VDC
3.95-4.05 VDC
4.08 VDC
Null Offset
0.17 VDC
0.2-0.3 VDC
0.33 VDC
3.59 VDC
3.65-3.85 VDC
Span*
±0.03 % Span
±0.05 % Span
±1.0 % Span ±1.0 % Span
±1.5 % Span ±1.5 % Span
Supply Voltage (Vs)
5.0 VDC
Common Mode Pressure
0.15" DIA.
UP
1.29" 0.15"
±0.5 % Span 4.75 VDC
12.0" APPROX.
OUT
Hystereisis And Repeatability Temperature Error Null +10° To 40°C Span +10° To 40°C Stability (1 Year)
IN
±0.3 % Span
GND
Non-Linearity
3.91 VDC ±0.5 % Span
OUT (Black)
Full Scale Output (Positive Pressure)
2.20"
Maximum
GND (Green)
Typical
IN (Red)
Minimum
8.0 VDC
2ZPS004704324 S.P. Sensor
2.94"
15 PSI
Pressure Overload Positive Pressure (Hi Side) Negative Pressure (Lo Side)
25“ H2O 15“ H2O
Burst Pressure Positive Pressure (Hi Side) Negative Pressure (Lo Side)
50“ H2O 25“ H2O
0.60" (-)LO
0.200" (3/16" Tubing Conn.) 0.125" (1/8" Tubing Conn.)
Top View
*Span Is The Algebraic Difference Between End Points (Null Offset And Full Scale Output)
Warning!
1.95"
The plastic housing on the sensor is electrically conductive. Avoid contact with any electrical components. It is acceptable to mount the sensor on grounded sheet metal such as ductwork, electrical panels, etc.
0.55"
1.00" 0.35"
Warning! Use extreme care when mounting the sensor to avoid damage to the plastic housing. Do not overtighten the mounting screws! Do not use mounting screws which are too large for the holes!
Side View
General Notes 1.)Caution:The 2ZPS004704324 Pressure Sensor Should Be Mounted In A Vertical Position As Shown With Arrow Pointing Up. ( Tubing Connections Pointing Down). If This Mounting Position Is Not Possible In Your Application, It May Be Mounted In A Horizontal Position. When Mounted In A Horizontal Position Accuracy Will Be Affected By Approximately 2% Full Scale Null Shift Due To Diaphragm Gravity Effect Error.
2.)All Wiring To Be In Accordance With Local And National Electrical Codes And Specifications.
Duct Static Pressure Sensor Applications Mounting Information When The Sensor Is Used As A Duct Static Pressure Sensor It May Be Mounted To The Ductwork Near The Static Pressure Pickup Tube. If The Sensor Is Mounted In This Manner, Away From The Controller, The Modular Plug Must Be Cut Off And 3-conductor 24 Gauge Minimum Wire Must Be Butt Spliced To The Sensor Leads. The Controller Has A Terminal Block Which Is Paralleled With The Modular Jack To Allow Wiring Connections. Total Wire Length Should Not Exceed 100Ft. If Desired The Sensor May Also Be Located Near The Controller, With The Modular Plug On The Sensor Directly Connected To The Mating Controller Jack. When This Method Is Used Tubing Must Be Run From The Sensor To The Staic Pressure Pickup Tube. Tubing Should Not Exceed 250 Ft. And Must Be Continuous Without Any Splices.
JOB NAME
FILENAME 036-22301-001-A-0602.CDR
DATE: PAGE
1 of 1
06/28/02
DRAWN BY:
B. CREWS
DESCRIPTION:
2ZPS004704324 Pressure Sensor Form: 036-22301-001 Rev. A (0602) Supersedes: Nothing
0-5“ H2O Pressure Range - 5 VDC Operation
3.92 VDC
3.95-4.05 VDC
4.08 VDC
Null Offset
0.17 VDC
0.2-0.3 VDC
0.33 VDC
3.59 VDC
3.65-3.85 VDC
Span*
±0.03 % Span
±0.05 % Span
±1.0 % Span ±1.0 % Span
±1.5 % Span ±1.5 % Span
Supply Voltage (Vs)
5.0 VDC
Common Mode Pressure
0.15" DIA.
UP
1.29" 0.15"
±0.5 % Span 4.75 VDC
12.0" APPROX.
OUT
Hystereisis And Repeatability Temperature Error Null +10° To 40°C Span +10° To 40°C Stability (1 Year)
IN
±0.3 % Span
GND
Non-Linearity
3.91 VDC ±0.5 % Span
OUT (Black)
Full Scale Output (Positive Pressure)
2.20"
Maximum
GND (Green)
Typical
IN (Red)
Minimum
8.0 VDC
2ZPS004704324 S.P. Sensor
2.94"
15 PSI
Pressure Overload Positive Pressure (Hi Side) Negative Pressure (Lo Side)
25“ H2O 15“ H2O
Burst Pressure Positive Pressure (Hi Side) Negative Pressure (Lo Side)
50“ H2O 25“ H2O
0.60" (-)LO
0.200" (3/16" Tubing Conn.) 0.125" (1/8" Tubing Conn.)
Top View
*Span Is The Algebraic Difference Between End Points (Null Offset And Full Scale Output)
Warning!
1.95"
The plastic housing on the sensor is electrically conductive. Avoid contact with any electrical components. It is acceptable to mount the sensor on grounded sheet metal such as ductwork, electrical panels, etc.
0.55"
1.00" 0.35"
Warning! Use extreme care when mounting the sensor to avoid damage to the plastic housing. Do not overtighten the mounting screws! Do not use mounting screws which are too large for the holes!
Side View
General Notes 1.)Caution:The 2ZPS004704324 Pressure Sensor Should Be Mounted In A Vertical Position As Shown With Arrow Pointing Up. ( Tubing Connections Pointing Down). If This Mounting Position Is Not Possible In Your Application, It May Be Mounted In A Horizontal Position. When Mounted In A Horizontal Position Accuracy Will Be Affected By Approximately 2% Full Scale Null Shift Due To Diaphragm Gravity Effect Error.
2.)All Wiring To Be In Accordance With Local And National Electrical Codes And Specifications.
Duct Static Pressure Sensor Applications Mounting Information When The Sensor Is Used As A Duct Static Pressure Sensor It May Be Mounted To The Ductwork Near The Static Pressure Pickup Tube. If The Sensor Is Mounted In This Manner, Away From The Controller, The Modular Plug Must Be Cut Off And 3-conductor 24 Gauge Minimum Wire Must Be Butt Spliced To The Sensor Leads. The Controller Has A Terminal Block Which Is Paralleled With The Modular Jack To Allow Wiring Connections. Total Wire Length Should Not Exceed 100Ft. If Desired The Sensor May Also Be Located Near The Controller, With The Modular Plug On The Sensor Directly Connected To The Mating Controller Jack. When This Method Is Used Tubing Must Be Run From The Sensor To The Staic Pressure Pickup Tube. Tubing Should Not Exceed 250 Ft. And Must Be Continuous Without Any Splices.
JOB NAME
FILENAME 036-22301-001-A-0602.CDR
DATE: PAGE
1 of 1
06/28/02
DRAWN BY:
B. CREWS
DESCRIPTION:
2ZPS004704324 Pressure Sensor Form: 036-22301-001 Rev. A (0602) Supersedes: Nothing
Related Documents
Pressure Sensor - 2zps004704324
June 2020 1
Pressure Sensor History
December 2019 5
Pressure Sensor Sdet
November 2019 2
Hydro Static Pressure Level Sensor
May 2020 7
At2 H 21 Pressure Sensor Improved
May 2020 2