CHANDAB
CHANDA BWALYA & ASSOCIATES LIMITED GROUP SAFETY MEETINGS
Department/Section ENGINEERING
Date : 10/09/09
Subject: WORK PERMIT REQUIREMENT Present: 1. P. KATONGO …………………. 3. L. PHIRI …………………………
2. P. BANDA …………………… 4. E. DOMBOLA ………………..
5. B. CHANDA. ……………………
Discussion Points/ Actions required Work permits are required for all works carried out within the Refinery Restricted Areas with the exceptions of the following: 1. Work performed by operators in their course of duty. 2. Welding works done in the Refinery workshops. 3. Isolations, Re-energizing or Resetting of Electrical equipment in Sub-stations. 4. Lab Staff & their Test apparatus or Machines /Maintenance of the same in the course of their normal duties. 5. Normal duties of Inspection Staff, Vibration Monitoring Staff & Lab Staff when they cross the sections, they should just inform the Supervisor of the host section before entering. 6. All works done outside the Refinery Bonded Area. TYPES OF WORK PERMITS. 1. HOT WORK Works that is expected to produce sparks naked flame or any source of ignition. 2. COLD WORK Any work within the Refinery Bonded Area that does not fall under the hot work as defined above.
CHAIRMAN OF MEETING Sign ………………………..
Follow up actions
CHANDAB