Ppap Level Iii Requirements

PPAP Level III REQUIREMENTS

PPAP Submission Levels Level Level Level Level Level

1 2 3 4 5

Part Submission Warrant (PSW) only. PSW with product samples and other items requested. PSW with product samples and complete supporting data. PSW and other items requested. PSW with product samples and complete supporting data available for review at the manufacturer.

Note: Level 3 will typically be used. Blackmer’s minimum supporting data is indicated below. Yellow items are always needed. ITEM

REQUIREMENT

COMMENTS

Design Records

Rarely Specified

Blackmer typically owns all design.

Engineering Change Documents Customer Engineering Approval Design FMEA

Rarely Specified

Process Flow Diagrams Process FMEA

Always required. Always required.

Dimensional Results Material Performance Test Results Initial Process Study Measurement System Analysis Study Qualified Laboratory Documentation Control Plans

Always required. Always required.

Rarely Specified

May be requested to assure control of special processes.

Rarely Specified

As specified by QA As specified by QA As specified by QA Always required.

Part Submission Warrant (PSW) Appearance Approval Report Bulk Material Requirements Sample Product

Always required.

Master Samples

As specified by QA

Checking Aids

As specified by QA

Records of Compliance

As specified by QA

As specified by QA As specified by QA Always required.

C:\Documents and Settings\misslitz\My Documents\PPAP-Level-III-Requirements.doc