Notes 32_class.docx

Configure physical network connections

Configure FTE using the Installation Builder 7.5.1 About Master definitions and FTE

If you create a Master definition in which you define all the FTE options, you can use it to configure your Experion FTE node. Essentially, you download the Master definition that contains all the FTE configuration options to the FTE node. Refer to the Installation Builder User Guide for information on using the tool and creating a Master definition.

7.5.2 Considerations

• You can only perform a download when the Installation Builder is running in the online mode and is connected to the IDB. • When you perform a download, the integrity of the master definition is validated, and if there are errors, you are allowed to continue.

7.5.3 Prerequisites

Before using this procedure ensure that. • You are logged on with an account that has administrator privileges. • You launched the Installation Builder in online mode. • The node being updated with the master definition has Experion R301 or later software installed.

7.5.4 Download FTE-configured master definition

Use this procedure to download the Master definition containing the correct FTE options to the FTE node. 1 In Installation Builder network tree view, find the computer node on which the FTE options are to be configured. 2 Select the Master Definition under the computer node in the network tree. 3 Right-click the Master Definition and choose File > Download or click toolbar. A confirmation message is displayed. 4 Click Yes. 5 The tool verifies the target node is the same type defined in the node definition and validates the integrity of the values. If it detects any errors, an Online Validation Errors message is displayed. Click OK to return to the Node Installation Builder and correct the errors. Refer to the “Validate Node Definitions” section in the Installation Builder User Guide. 6 If there are differences between the current configuration and the configuration being downloaded, a