Nokia Codes,

Phone Codes Nokia | Siemens | Panasonic | Motorola | Ericsson

Nokia

CODES

DESCRIPTIONS

*3370# #3370# *#4720# *#4720# *#0000# *#9999# *#06# #pw+1234567890+1# #pw+1234567890+2# #pw+1234567890+3# #pw+1234567890+4# *#147# *#1471# *#21# *#2640# *#30# *#43# *#61# *#62# *#67# *#67705646# *#73# *#746025625# *#7760# *#7780# *#8110# *#92702689# *#94870345123456789# **21*number# **61*number# **67*number# 12345 press and hold #

Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5% Deactivate Enhanced Full Rate Codec (EFR) Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time Deactivate Half Rate Codec Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type Phones software version if *#0000# does not work For checking the International Mobile Equipment Identity (IMEI Number) Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) (vodafone) this lets you know who called you last Last call (Only vodofone) Allows you to check the number that "All Calls" are diverted to Displays security code in use Lets you see the private number Allows you to check the "Call Waiting" status of your phone. Allows you to check the number that "On No Reply" calls are diverted to Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to Allows you to check the number that "On Busy Calls" are diverted to Removes operator logo on 3310 & 3330 Reset phone timers and game scores Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible Manufactures code Restore factory settings Software version for the nokia 8110 Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again Deactivate the PWM-Mem Turn on "All Calls" diverting to the phone number entered Turn on "No Reply" diverting to the phone number entered Turn on "On Busy" diverting to the phone number entered This is the default security code Lets you switch between lines

*#3283# or *#DATE# Date of Manufacture *#682371158412125# Software Version

Siemens

MODELS *#0003*(secret code 8 digits)# Siemens S25/C25

CODES & DESCRIPTIONS All Siemens Phones: Service Provider Unlock SP unlock *#0003*(secret code 8 digits)# Show IMEI code: * # 06 # Resets language to automatic selection : * # 0000 # then Green button Pin Out

Data Cable schematics Phone's connector pin-out: 1- GND 2- SB 3- POWER 4- NC 5- TX 6- RX 7- CLOCK 8- DATA 9- GND MIC 10- HF MIC 11- AUDIO 12- GND AUDIO

Siemens S1/S3/S3 Com To view the software date and else with S3 com, S4, S4Power, Sony cmdx 1000e press with SIM removed *#06# and left softkey. To view some other stuff with S4Power, Sony cmdx 1000e press with SIM removed *#06# and left softkey twice. To view the software date with S3 com, S4, S4Power, Sony cmdx 1000e press with SIM installed menu 98 and left softkey twice. ACTIVATE MONITOR MODE Siemens S1/S3 Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 5553756, Hang-Up Button (Red Handset key)

Siemens S3 COM/S4 Menu, 9 (Phone Options), 7 (Phone Status - 8 on Some), Left Display Button (left MENU key), 7684666, Hang-Up Button (Red Handset key) Note: Now Monitor should appear at the bottom of the Network Options menu. MONITOR MODE Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress ) CH Channel Number RX Signal Strength (dB) N NCC (Colour Code) B BCC (Colour Code) CI Cell ID (in Hex) C1+ How long before phone does forced hand over. (see RX and RXAM) LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC TXPWR Transmit Power (dB) RXAM Receive signal strength cut-off point TS* Time Slot Number TA* Timing Advance. Distance from tower in Km X 2 PL* Power Level POWER table PL: 5 6 7 8 9 10 11 12 13 14 15 dB: 33 31 29 27 25 23 21 19 17 15 13 Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02 LF* C1 value with continuous transmission from tower LS* C1 Value with discontinuous transmission from tower QF* Bit Error Rate with continuous transmission from tower

QS* Bit Error Rate with discontinuous transmission from tower BER (bit error rate) table QF/QS register: 0 1 2 3 4 5 6 7 % of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Siemens S1/S3 Here's a trick to play Tetris, also known as Klotz on a Siemens S1. Turn the phone on. Enter PIN. Before the telephone has logged in to the your GSM net do the following steps. 1: Choose F 9 (function settings) 2: Choose send own number and push the right button for choose. 3: Push 9 USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4. [I have just heard from one of the programmers of the phone that Tetris was in the phone during development, but it was removed before it was produced. Apparently someone has the patent on games in mobile phones and Siemens didn't want to pay the licensing fees. It was either in Menu F-9-9 or it's not there at all.]

Siemens S3 Comfort MONITOR MODE The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone. TO ACTIVATE MONITOR MODE: Turn the phone on. Enter the PIN access code on press OK. (Only if is enabled). Press Menu. (Left top button). Press 9. (Phone Options). Press 8. (Phone Status) (May be button 7 in some phones). You may see your IMEI Number Left Display Button (Top left MENU key). 7684666 Hang-Up Button. (Red Handset key). Note: Monitor should appear now at the bottom of the Network Options menu. MONITOR MODE Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Siemens S4/S4 Power In phonebook under "Own Phone No." enter +12022243121 (which is the number to the White House) and you'll get a greeting from the people who programmed the phone. MONITOR MODE The Siemens S4 series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone. TO ACTIVATE MONITOR MODE: Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 7684666, Hang-Up Button (Red Handset key) Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress ) -------------------CH Channel Number RX Signal Strength (dB) N NCC (Color Code) B BCC (Color Code) CI Cell ID (in Hex) C1+ how long before phone does forced hand over. (see RX and RXAM) LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC TXPWR Transmit Power (dB) RXAM Reeceive signal strength cut-off point TS* Time Slot Number TA* Timing Advance. Distance from tower in Km X 2 PL* Power Level

Power Table

PL: 5 6 7 8 9 10 11 12 13 14 15 dB: 33 31 29 27 25 23 21 19 17 15 13 Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02 LF* C1 value with continuous transmission from tower LS* C1 Value with discontinuous transmission from tower QF* Bit Error Rate with continuous transmission from tower QS* Bit Error Rate with discontinuous transmission from tower

BER (bit error rate) table QF/QS register: 0 1 2 3 4 5 6 7 % of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Siemens S6/S10 In Phonebook, store as your own number: +12022243121 Then you get the sun and two palms in the display, also a greeting message of the "MMI-team". It has been said that the phone number is the number of the Capitol building in Washington, DC (but not sure).

Siemens S15 Secret Menu's Press * -> # -> 7 -> 4 -> 3 -> 6 -> 3 -> 6 -> 7 -> * -> 8 -> 3 -> 7 -> 8 -> # ,press clear key to clear screen and return to stand-by mode press Menu, it will show additional menu Menu 3.3.4 Band selection, Menu 3.3.4.1 Automatic band selection, Menu 3.3.4.2 select GSM 900 only, Menu 3.3.4.3 select GSM 1800 only, Menu 10 Engineering, Menu 10.1 MS info, Menu 10.2 software detail, Menu 10.2.1 software version, Menu 10.2.2 EEPROM version, Menu Menu Menu Menu Menu

10.3 Test/production details 10.3.1 Hardware deta 10.3.2 production deta 10.3.3 Service deta 10.3.4 Mechanical deta

Menu 10.1.1 MS info on, then on the screen show these, for example: FCN RXL C1 C2 642 011+11+91 -> PAGE 1 CID DSC CB 11211 045 000 -> PAGE 2 BCC NCC TN 000 002 00 -> PAGE 3 RXf RXs RQf RQs 00 00 00 00 -> PAGE 4 ATa APa Hn Hf 001 000 05 00 -> PAGE 5 DTU DTD HP CI + ? - - -> PAGE 6 MM CC RR IdNS Nul Idl -> PAGE 7

Panasonic

CODES

DESCRIPTIONS

*#06#

For checking the International Mobile Equipment Identity (IMEI Number)

\ Motorola

CODES *#06# [][][] 119 [] 1 [] [][][] 119 [] 0 []

DESCRIPTIONS For checking the International Mobile Equipment Identity (IMEI Number) Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5% Deactivate Enhanced Full Rate Codec (EFR)

Ericsson

CODES *#06# Shortcuts: Save a Missed Call into your phone directory Hide your number when calling when you don't want the other party to know your number) Check you battery level when phone is off Save a number into your phone memory (not SIM card) Call a phone number from SMS message

DESCRIPTIONS For checking the International Mobile Equipment Identity (IMEI Number) Scroll to "Missed Call", press "Yes" to display the required number. Press any number (i.e. 0 to 9), then press "clear" once to clear that number, then press & hold "<" until you see "Store". Press "Yes" After dialling the required number & before pressing "Yes", press ">" twice to choose "Hide Id?" & then press "Yes". Also works for pre-programmed & last dialled numbers just press "No" & wait for the number to appear on the screen first then follow same procedure Press "No" quickly one time & wait for the battery meter to show up! Follow normal procedures to store a phone number. When prompted to set a storage position, press "#" once & key in desired location, or press "#" twice for next available position You can call from within a SMS message if the phone number is written in it. Just scroll the message until the phone number appears on the display, then press "Yes" to call

MADE BY SHINYBOY007