New Ip Receiver Sting Ir-200

NEW IP RECEIVER Sting IR-200 PVR

Update Receiver Software 1. The receiver update is via USB Stick . 2. You Should Download the Software from : http://www.telran.co.il/sat/index.asp?module=satDwonload 3. download the file save on your PC unzip him then get the file : IR-2002.09.ups and copy to a USB Stick . 4. insert the usb Stick into the receiver front panel (USB port) . 5. press Menu Go to Utility right arrow go to USB press OK.

6.after press OK you will see all files on your USB Stick now Select the file : IR-200-2.09.ups and press OK

7. now press OK on S/W Upgrade and the download will begin after it will Done the receiver will make Reboot and now you have new SW .

Main Menu

Installation Page

1.To get to the sub option in installation page you need to press right arrow on RCU and then choose the option you need and press OK.

2.To get out to main you press Exit and then Left arrow to get to Main Menu

Satellite Search Option

Diseqc Window

Here you choose your Satellite diseq Port.

Network Windows

IP Setting

1.first line we choose Auto and press Apply and then Exit. 2. now we go to" Net Application"

3. Press Down arrow and mark Net Application and press OK.

4. in Type choose "NuevoXtream" 5. Input Type Choose "Domain" 6. in Server Press OK.

7. if there is symbols in please delete them by pressing SAT on RCU. 8. Now write in small letters "g2.zapto.org" after finish writing press Exit and then OK.

9. now down to Authorization and press OK. 10. In this option we insert our User ID , Password , and Registration Number.

11. once again if there is symbols in please delete them by pressing SAT on RCU until you get to first on the left line. 12. After complete insert all registration in Caps Letter press Exit and then OK. 13.now go to Register press OK and wait until you will get a popup window "Registration Successful"

That’s Complete your receiver Settings Good Luck.