Netsend For Quality Tool

NetSend for Medalist Quality Tool Author: Yong Chin Wee, ([email protected]) Date of Last Update: 8 Nov 2005

Required Software Version • • •

Intelligent Test Framework (ITF) Version 3.1.1 (31 Aug 2005) Medalist Repair Tool Version 3.1 Medalist Quality Tool Version 1.1

Overview This document provides process to setup Alarm Notification Feature: netsend for Medalist Quality Tool.

CONTENTS I. Setup Alarm Notification Feature on Medalist Quality Tool PC ............................... 2 II. Start the Messenger Service on Quality Tool PC and Target PC ............................... 4 III. Start Quality Tool and Set alarm threshold limit .................................................... 7

Page 1

I.

Setup Alarm Notification Feature on Medalist Quality Tool PC

1. Create folder in Medalist Quality Tool’s bin folder

2. Copy the required setup file to Medalist Quality Tool’s alarmconf folder 3. List of setup file are: hosts.txt, readme.txt and run.bat

Page 2

4. Use Text editor to open file 5. Enter the hostname of the target PC 6. Save and close the file

• • Note: Target PC will receive the message from the Medalist Quality Tool client PC

Page 3

II.

Start the Messenger Service on Quality Tool PC and Target PC

1. Navigate to Control Panel 2. Double Click on the

3. Double on the Service icon,

Page 4

4. Right Click on the Messenger shown as highlighted below

5. Change the Startup type to Automatic (Box in Red) 6. Click on the <Start> button and button

Page 5

7. Verified that <Messenger> Service is started and set to Automatic as shown below

Page 6

III.

Start Quality Tool and Set alarm threshold limit

1. Click on the Quality Tool Shortcut, 2. Click on

Page 7

3. Set the Alarm threshold limits

Page 8

4. Once the value exceed the limits, the Alarm would appear at the Quality Tool as shown

5. Messenger dialog on target PC as shown below

Page 9