176-0206 MOTOR GP-GEAR -HYDRAULIC FAN S/N AAB1-UP; AAN1UP PART OF 146-9824 MOTOR GP-GEAR AN ATTACHMENT 924GZ WHEEL LOADER 924GZ WHEEL LOADER AAB 924G and 924Gz Wheel Loader AAB00001-UP (MACHINE) POWERED BY 3056 Engine SEBP2975
HYDRAULIC SYSTEM MOTOR GP
140-9257 MOTOR & MTG GP-HYDRAULIC FAN 192-7495 MOTOR & MTG GP-HYDRAULIC FAN 195-3285 MOTOR AR-HYDRAULIC FAN 195-3287 MOTOR AR-HYDRAULIC FAN 146-9824 MOTOR GP-GEAR 146-9824 MOTOR GP-GEAR 176-0206 MOTOR GP-GEAR 192-7741 MOTOR GP-GEAR
Parts catalogue group:
176-0206: MOTOR GP-GEAR
Parts for your 924GZ WHEEL LOADER: CATERPILLAR SIS Pos.
Part No
Qty
Parts name
1.
2M-2570
[1]
LOCKNUT (1/2-20-THD)
2.
5P-8245
[1]
WASHER-HARD (13.5X25.5X3-MM THK)
3.
176-0209 N
[1]
SEAL-LIP TYPE
4.
8J-6273 N
[1]
RING-RETAINING
5.
135-5935 N
[1]
SEAL-SHAFT
6.
176-0210
[1]
FLANGE
7.
4W-7356 N
[2]
SEAL-O-RING
8.
099-3095
[1]
DOWEL
9.
176-0211
[1]
BODY-VALVE
10.
087-0991
[1]
VALVE AS-CHECK
11.
9S-4182
[2]
PLUG-O-RING
12.
209-7792
[1]
VALVE GP-RELIEF
13.
176-0798 M
[4]
BOLT (M10X1.5X94-MM)
14.
3J-7354 N
[2]
SEAL-O-RING
15.
3K-0360 JLN
[2]
SEAL-O-RING
16.
6V-8397 JLN
[2]
SEAL-O-RING
299-3939 MOTOR GP-GEAR -REVERSING FAN S/N DHC1-UP; CXK1-UP PART OF 289-6394 MOTOR GP-GEAR AN ATTACHMENT 2896394 MOTOR GP-GEAR Caterpillar 924H, 924HZ, 924K, 928HZ, 930K, 938K
ENTIRE GROUP: 299-3939: MOTOR GP-GEAR
Sem Pórticos no Corpo: 19cm³/rot
INDIVIDUAL PARTS: 1.208-2293[4] 2.208-0792[1] 3.099-3095[4] 4.220-2680[1] -
BOLT (M10X1.5X97.8-MM) FLANGE . DOWEL . CAP-END .
PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY AVAILABLE REPAIR KIT(S):
453-2020[1] - KIT-SEAL . (INCLUDES O-RING SEALS, REATAINING RING, SHAFT SEAL,
192-7739 MOTOR GP-GEAR -REVERSIBLE FAN-HYDRAULIC FAN S/N 6XR1-UP PART OF 194-7748 CONVERSION GP-HYDRAULIC FAN, 192-7491 MOTOR & MTG GPHYDRAULIC FAN AN ATTACHMENT
ENTIRE GROUP: Sem Pórticos no Corpo: 19cm³/rot 192-7739: MOTOR GP-GEAR : 924G 3DZ 924G 3PZ 924G 6YW 924G 9SW 924GZ AAB 924G AAN
INDIVIDUAL PARTS: 1.2M-2570[1] - LOCKNUT (1/2-20-THD) 2.5P-8245[1] - WASHER-HARD (13.5X25.5X3-MM THK) 3.113-3632[1] - ADAPTER-FAN . 4.296-6031 J[1] - SEAL-LIP TYPE . 5.8J-6273 J[1] - RING-RETAINING 6.135-5935 J[1] - SEAL-SHAFT . 7.208-0792[1] - FLANGE . 8.4W-7356 J[2] - SEAL-O-RING 9.099-3095[4] - DOWEL . 10.189-2100 Y[1] - VALVE GP-SOLENOID (24-VOLT)(HYDRAULIC FAN) . 11.208-0924[1] - VALVE GP-RELIEF (FAN SPEED) . 12.208-0886 J[1] - VALVE GP-RELIEF (HYDRAULIC FAN MOTOR) . 13.208-2293[2] - BOLT (M10X1.5X97.8-MM) 14.160-8492 M[2] - BOLT (M10X1.5X85-MM) .