Momentum Press 2013 Catalog

Solutions for the Engineering Community

2013 Catalog OCTOBER – DECEMBER

w w w . m o m e n t u m p r e s s . n e t

Contents

Introduction................................................................................................................. 1 Forthcoming: October through December, 2013.................................................. 2 Biomedical and Nanomedical Technologies...................................................................................2 Civil engineering ................................................................................................................................................. 3 manufacturing engineering....................................................................................................................... 3 material science and engineering......................................................................................................... 4 Mechanical engineering................................................................................................................................ 5

Recently Published: January through August, 2013............................................ 6 Biomedical and Nanomedical Technologies...................................................................................6 CIVIL Engineering...................................................................................................................................................7 Environmental Science and Engineering........................................................................................... 8 Manufacturing engineering.......................................................................................................................9 Materials Science and engineering..................................................................................................... 11 Mechanical engineering.............................................................................................................................. 11

Published in 2012...................................................................................................... 14 Backlist: ...................................................................................................................... 17 Contact Us................................................................................................................... 25

Introduction

October 1, 2013 In this catalog, you’ll find new titles in science, engineering, and applied technology, written for practitioners, researchers, faculty, and students. In 2013, we are continuing to bring you the same innovative content we’ve always been proud to offer in print, individual eBooks, and in digital collections. Inside, you’ll also find an announcement for our MP Collections. On page 24, you can read more details about the applied, concise titles (average page count around 150) which will be aimed at advanced engineering students, and ideal for course readings and research in specialty areas less covered by introductory textbooks and research monographs. We’re looking for editors and authors for these collections, so let us hear from you with ideas! And last, MP and ASME Press have begun a new series, The Technologies for Sustainable Life Series (Simon Pollard, PhD, Series Editor). See page 23 for more details. Enjoy reading our fourth quarter 2013 catalog, and contact us with any questions, orders, or ideas. Thank You!

800.689.2432 • momentumpress.net

1

Front List Impedimetric Biosensors for Medical Applications Current Progress and Challenges By Jo Valerie Rushworth, Natalie A. Hirst, and Jack A. Goode

Publication Date: November 2013 Print ISBN: 978-1-60650-636-3 $89.95 Ebook ISBN: 978-1-60650-637-0 $81.00

Pages: 88 Biomedical and Nanomedical Technologies

In this monograph, the authors discuss the current progress in the medical application of impedimetric biosensors, along with the key challenges in the field. First, a general overview of biosensor development, structure and function is presented, followed by a detailed discussion of impedimetric biosensors and the principles of electrochemical impedance spectroscopy. Next, the current state-of-the art in terms of the science and technology underpinning impedance-based biosensors is reviewed in detail. The layer-by-layer construction of impedimetric sensors is described, including the design of electrodes, their nano-modification, transducer surface functionalization and the attachment of different bioreceptors. The current challenges of translating lab-based biosensor platforms into commerciallyavailable devices that function with real patient samples at the POC are presented. From the ASME/MP Series: Biomedical & Nanomedical Technologies.

DFA (Detrended Fluctuation Analysis) An Empirical Study on Heartbeat By Toru Yazawa

Publication Date: December 2013 Print ISBN: 978-1-60650-612-7 $89.95 Ebook ISBN: 978-1-60650-613-4 $81.00

Pages: 88 Biomedical and Nanomedical Technologies

2

This book described empirical results of biological use of an analytical technique, DFA (Detrended Fluctuation Analysis). But this book did not describe what DFA is. Instead, using DFA, fluctuation of heartbeats was investigated in this book. Because human hearts are inappropriate specimens for conducting physiological experiments, crustacean hearts were chosen at first as a model to conduct various experiments such as isolated-heart experiments. Later, this book described human heart as well. First, we tried to describe how human hearts resemble with invertebrate hearts. (Those who do not need biology can skip biology sections.) Then, various results obtained from analysis both on model animals and humans were presented. By presenting the empirical results, the authors suggested how DFA is practically useful in the field of biomedical technology. From the ASME/MP Series: Biomedical & Nanomedical Technologies.

Momentum Press • 4th Quarter 2013 Catalog

Front List concise Encyclopedia of Construction Terms and Phrases Karl F. Schmid This is the first up-to-date, comprehensive reference on building construction terms and phrases to have been published in recent years. The coverage will be wide ranging from familiar terms like ‘concrete’ to arcane terms like ‘elutriator.’ Entries are explained in terms of their use in specific types of construction. Common construction math formulas are also explained. The book will provide ample resources for further reference and study, including listings of relevant associations and societies, as well as governmental agencies involved with the construction industry. Publication Date: October 2013 Print ISBN: 978-1-60650-618-9 $149.95 Ebook ISBN: 978-1-60650-619-6 $135.00

Pages: 700 CIVIL Engineering

Automating Manufacturing Operations The Penultimate Approach William M. Hawkins

Publication Date: December 2013 Print ISBN: 978-1-60650-367-6 $99.95 Ebook ISBN: 978-1-60650-369-0 $90.00

Pages: 320

Industrial automation has gone from simple pre-programmed machine instructions to complex general manufacturing, rulesbased automation procedures. Unlike other books on industrial automation, this book focuses in on ‘Manufacturing Operations Systems’ (MOPS) in general. It describes their development, implementation and successful management. The book especially addresses the all-important human-machine interface: computerbased manufacturing procedures that are understandable to both computers and humans. The reader will benefit from: • An introduction to the theory of tubular flames • The ‘how to’ of maintaining stability of tubular flames through continuous combustion • Examples of both small-scale and large-scale applications like steel making, chemical processing, flexible-fuel-source heaters, efficient boilers, and other similar uses

Manufacturing engineering

800.689.2432 • momentumpress.net

3

Frontlist Real Time Control of the Industrial Enterprise Peter Martin and Walter Boyes

Publication Date: December 2013 Print ISBN: 978-1-60650-359-1 $89.95 Ebook ISBN: 978-1-60650-361-4 $81.00

Pages: 220 Manufacturing engineering

Over the last fifty years, almost none of the productivity gains in manufacturing have come from better chemistry or better design, or even better management and financial controls. Rather, those gains have come from better automation and control of the processes: continuous, batch, hybrid , and discrete. The secret to making manufacturing sustainable is better control. So, why aren’t the theories that have led to enormous gains in productivity being used above the plant level? This book explains both why not and how better controls can be applied to the supply chain, and to enterprise financial management. This book provides engineering and technology managers the insight and tools for achieving a fully integrated automated manufacturing enterprise, from the technical and engineering side to the business management side. It is particularly helpful to readers seeking to bring the non-technical parts of a manufacturing operation—customer service, cost and financial management—in line with the alreadyautomated production, inventory management, and plant management.

Scattering of Acoustic and Electromagnetic Waves by Small Impedance Bodies of Arbitrary Shapes Alexander G. Ramm

Publication Date: November 2013

The behavior of acoustic or electromagnetic waves reflecting off, and scattering from, intercepted bodies of any size and kind can make determinations about the materials of those bodies and help in better understanding how to manipulate such materials for desired characteristics. This book offers analytical formulas which allow you to calculate acoustic and electromagnetic waves, scattered by one and many small bodies of an arbitrary shape under various boundary conditions. Equations for the effective (self-consistent) field in media consisting of many small bodies are derived. These results and formulas are new and not available in the works of other authors.

Print ISBN: 978-1-60650-621-9 $159.95 Ebook ISBN: 978-1-60650-622-6 $143.00

Pages: 256 Materials Science and Engineering

4

Momentum Press • 4th Quarter 2013 Catalog

Frontlist Tubular Combustion Advanced Black Belt Concepts Satoru Ishizuka, Derek Dunn-Rankin, and Robert W. Pitz

Publication Date: October 2013 Print ISBN: 978-1-60650-303-4 $89.95 Ebook ISBN: 978-1-60650-305-8 $81.00

Pages: 192

Tubular combustors are cylindrical tubes where flame ignition and propagation occur in a spatially confined, highly controlled environment, in a nearly flat, elongated geometry. This allows for some unique advantages where extremely even heat dispersion is required over a large surface while still maintaining fuel efficiency. Tubular combustors also allow for easy flexibility in type of fuel source, allowing for quick changeover to meet various needs and changing fuel pricing. This new addition to the MP sustainable energy series will provide the most up-to-date research on tubular combustion—some of it only now coming out of private proprietary protection. Highlights include: • An introduction to the theory of tubular flames • The ‘how to’ of maintaining stability of tubular flames through continuous combustion • Examples of both small-scale and large-scale applications like steel making, chemical processing, flexible-fuel-source heaters, efficient boilers, and other similar uses

mechanical engineering

800.689.2432 • momentumpress.net

5

Recently Published GFP Whole Cell Microbial Biosensors Scale-up and scale-down effects on biopharmaceutical processes By Frank Delvigne

Publication Date: January 2013 Print ISBN: 978-1-60650-427-7 $89.95 Ebook ISBN: 978-1-60650-417-8 $81.00 Pages: 52 Biomedical and Nanomedical Technologies

Two strategies are usually considered for the optimization of microbial bioprocesses. The first one involves genetic or metabolic engineering of the target microbial strains in order to improve its production efficiency or its tolerance to adverse conditions. The second one is based on the chemical engineering improvement of the bioreactors and scaling-up rules. This work is more particularly dedicated to this second class of parameters. Recent developments in bioreactor technologies follow the scaling-out principle, i.e. carrying out several cultures in parallel with controlled conditions for screening purposes. Several mini-bioreactor concepts, i.e. bioreactor with working volume of 1 to 100 mL with controlling devices, have been developed following this principle. From the ASME/MP Series: Biomedical & Nanomedical Technologies. See Page 16 For Ordering Information.

Photodynamic Therapy Mediated by Fullerenes and their Derivatives By Mike Hamblin The Fullerene molecule is a carbon-based nano-scale structure of 60 carbon atoms arranged in a 3-dimensional soccer ball- like sphere. It is highly stable, but it can be modified with functional groups for desired biological activity. This new monograph in the ASME-Momentum Press series on Biomedical & Nanomedical Technologies will explore the basic physics and chemistry of Fullerenes, how the Fullerene molecule can be chemically modified with bio-active moieties, and then how it can be applied in clinical use. Examples of antimicrobial and anti-cancer uses will be discussed. Publication Date: January 2013 Print ISBN: 978-1-60650-426-0 $89.95 Ebook ISBN: 978-1-60650-416-1 $81.00

From the ASME/MP Series: Biomedical & Nanomedical Technologies. See Page 16 For Ordering Information.

Pages: 60 Biomedical and Nanomedical Technologies

6

Momentum Press • 4th Quarter 2013 Catalog

Recently Published Biocompatible Nanomaterials for Targeted and Controlled Delivery of Biomacromolecules By Sanju Dhawan and Deepak Kapoor

Publication Date: June 2013 Print ISBN: 978-1-60650-600-4 $89.95 Ebook ISBN: 978-1-60650-602-8 $81.00 Pages: 56 Biomedical and Nanomedical Technologies

Nanomaterials have gained immense recognition, particularly in biomacromolecular delivery, owing to their capability of diagnosis, controlled drug release or targeting at molecular, cellular and organ level. The present chapter endeavors to describe the role of nanomaterials in the development of various nanostructured, biomacromolecular delivery systems. The chapter presents a discussion on various physicochemical properties, preparation techniques and analytical tools for characterizing these systems. The mechanisms of cellular internalization of nanomaterial based targeted systems is also embarked upon. Various challenges posed during the development, scale up and large-scale production is discussed. A brief overview pertaining to the regulatory requirements and commercialization of these systems is also included. From the ASME/MP Series: Biomedical & Nanomedical Technologies. See Page 16 For Ordering Information.

Facilities Management Managing Maintenance for Buildings and Facilities By Joel Levitt

Publication Date: February 2013 Print ISBN: 978-1-60650-324-9 $120.95 Ebook ISBN: 978-1-60650-326-3 $109.00 Pages: 234

Facilities management is a broad-based discipline that calls into play architectural, construction, engineering and management skills, particularly for running and maintaining commercial, institutional, academic, and industrial buildings. This book will cover the essential role and responsibilities of the facilities manager, both as manager of existing building inventory as well as future planning and risk-based maintenance. Newcomers to facilities management will find this an excellent introduction, while established professionals will be able to brush up on the latest technological and regulatory trends affecting how complex facilities should be successfully maintained by way of risk assessment. For the classroom, the book contains ample exercises, useful ready-to-use forms and resources for extended study and instruction.

CIVIL Engineering

800.689.2432 • momentumpress.net

7

Recently Published BACnet The Global Standard for Building Automation and Control Networks By H. Michael Newman

Publication Date: August 2013 Print ISBN: 978-1-60650-288-4 $99.95 Ebook ISBN: 978-1-60650-290-7 $90.00

Pages: 358

BACnet is a set of data communication protocols, developed jointly by ASHRAE, ANSI and ISO, for how the automatic control systems in a building—from heating, to ventilation to lighting to fire control and alarm systems—can communicate with one another and, in turn, offer a centralized way for controlling all systems in a building. The BACnet protocols are made use of in central control systems manufactured by companies like Honeywell, Siemens, and Johnson Controls, among many others. This book will offer those readers the ‘inside wisdom’ from the person who actually helped to create this standard specification making it easier to understand the intent and use of each of the data sharing protocols, the controller requirements, and the opportunities for inter-operability between different proprietary controllers and systems.

civil engineering

The Path to More Sustainable Energy Systems How Do We Get There from Here? By Ben W. Ebenhack and Daniel M. Martinez Energy engineers, technology managers, and political leaders all need a solid, holistic understanding of where the world finds its energy—the limits of that energy—and what we will need to do in the future if we are to have a cleaner and environmentally sustainable world, all without sacrificing our modern technologicalbased civilization. This book will shed some much needed light on that conundrum. It

Publication Date: June 2013 Print ISBN: 978-1-60650-260-0 $76.95 Ebook ISBN: 978-1-60650-262-4 $70.00 Pages: 192

• Provides a broad overview of our current energy sources, their uses and limitations and political and economic constraints • Clarifies the urgency behind the sweeping changes in the world’s energy needs and available supplies • Offers a rational paradigm for how we can go about selecting the optimal mix of fossil, renewable and sustainable energy sources and how we can then aggressively move toward those more sustainable sources

Environmental Science and Engineering

8

Momentum Press • 4th Quarter 2013 Catalog

Recently Published Understanding Ultrasonic Level Measurement By Stephen Milligan, Henry Vandelinde, and Michael Cavanagh

Publication Date: January 2013 Print ISBN: 978-1-60650-439-0 $76.95

Storing, handling, and processing of bulk solid and liquid materials is fundamental to nearly every manufacturing and processing industry, from the food industry and agribusiness, to the plastics industry, to the mining and cement industries, to coal-fired electric utilities. This new book will offer a quick and useful guide to the use of ultrasound as a way to measure the levels of these materials in a wide variety of operational environments and situations. The book will explain the history of this technology, its proper set-up and operation, and a helpful selection of useful application examples. It will also offer good guidance on ultrasound equipment and vendors.

Ebook ISBN: 978-1-60650-441-3 $69.00 Pages: 152 Manufacturing Engineering

Mastering Lean Six Sigma Advanced Black Belt Concepts Salman Taghizadegan A Master Black Belt (MBB) in Six Sigma statistical quality control is awarded to those individuals who possess the highest level of expertise and knowledge of current industry practice. Becoming a Master Black Belt involves a great deal more than just learning advanced statistical techniques. It also involves knowing how to use those tools to implement and manage an overall Lean Six Sigma program. This book develops a dynamic program to meet the requirements of a MBB and provides the necessary skills for leading a company in a Quality Improvement initiative. Highlights of the book include: • an introduction to the requirements and knowledge needed for Publication Date: July 2013 a Six-Sigma Master Black-Belt. Print ISBN: 978-1-60650-404-8 • guidance on how to design a strategic Lean Six-Sigma $119.95 Infrastructure successfully. Ebook ISBN: 978-1-60650-406-2 • guidance on how to manage multiple on-going Lean Six-Sigma $108.00 Black-Belts Projects. Pages: 618 • coverage of statistical analysis concepts and advanced Manufacturing engineering measurement methods and tools. • illustrative case studies. 800.689.2432 • momentumpress.net 9

Recently Published Automated Weighing Technology Process Solutions By Ralph Closs, Henry Vandelinde, and Matt Morrissey Weighing items and bulk materials is one of the most essential aspects of any industrial enterprise, and automating those tasks is at the heart of any automated enterprise. This book will review the essential challenges in both static and dynamic weighing and then go on to explain how a suite of very popular, highly adopted controllers and sensors from Siemens electronics can be used to make such operations as efficient as possible. Useful applications for various types of industrial processes help to make vivid the benefits of this technology. Publication Date: August 2013 Print ISBN: 978-1-60650-633-2 $78.95 Ebook ISBN: 978-1-60650-634-9 $62.00 Pages: 150 Manufacturing Engineering

Control System Migrations A Practical Project Management Handbook By Daniel Roessler

Publication Date: September 2013 Print ISBN: 978-1-60650-443-7 $89.00 Ebook ISBN: 978-1-60650-445-1 $80.00 Pages: 320 Manufacturing Engineering

10

Reliable and effective control systems are a critical component of safe and profitable operations across process industries. And many of our industrial facilities today continue to operate using legacy control systems from the past four decades that are at or near the end of their lifecycles. Migration projects to modern control systems are complex, requiring detailed upfront planning, a methodical implementation strategy and astute project management. This comprehensive collection of best practices guides you to control system migration success. • A practical application guide to walk you through the entire process • A thorough resource to aid the identification of common and high-risk challenges • A concise primer of project management covering both the technical aspects of projects and the intangible factors for success Momentum Press • 4th Quarter 2013 Catalog

Recently Published X-Ray Fluorescence Spectrometry and Related Techniques: An Introduction By Eva Margui and Rene Van Grieken

Publication Date: February 2013 Print ISBN: 978-1-60650-391-1 $208.95 Ebook ISBN: 978-1-60650-393-5 $189.00 Pages: 142 Materials Science and engineering

X-ray fluorescence spectrometry (XRF) is a well-established analytical technique for qualitative and quantitative elemental analysis of a wide variety of routine quality control and research samples. Among its many desirable features, it delivers true multielement character analysis, acceptable speed and economy, easy of automation, and the capacity to analyze solid samples. This remarkable contribution to this field provides a comprehensive and up-to-date account of basic principles, recent developments, instrumentation, sample preparation procedures, and applications of XRF analysis. If you are a professional in materials science, analytic chemistry, or physics, you will benefit from not only the review of basics, but also the newly developed technologies with XRF. Those recent technological advances, including the design of low-power micro-focus tubes and novel X-ray optics and detectors, have made it possible to extend XRF to the analysis of low Z elements and to obtain 2D or 3D information on a micrometer-scale.

Chemical Sensors: Simulation and Modeling Volume 4: Optical Sensors Edited by Ghenadii Korotcenkov

Publication Date: January 2013 Print ISBN: 978-1-60650-318-8 $230.95 Ebook ISBN: 978-1-60650-320-1 $208.00 Pages: 502 Mechanical engineering

Volume 4: Optical Sensors covers various approaches used for modeling and simulation of different types optical sensors such as fiber optic, surface Plasmon resonance, Fabry-Perot interferometer, transmittance in the mid-infrared region, luminescence based devices, etc. Approaches used for design and optimization of optical systems aimed for remote gas sensing and gas analysis chamber for NDIR spectral range are discussed as well. The description of multiscale atomistic simulation of hierarchical nanostructured materials for optical chemical sensing is also included in present volume. This 5 volume reference work covering simulation and modeling will serve as the perfect complement to Momentum Press’s 6 volume reference works Chemical Sensors: Fundamentals of Sensing Materials and Chemical Sensors: Comprehensive Sensor Technologies, which present detailed information related to materials, technologies, construction and application of various devices for chemical sensing.

800.689.2432 • momentumpress.net

11

Recently Published Classical and Modern Engineering Methods in Fluid Flow and Heat Transfer An Introduction for Engineers and Students By Abram Dorfman

Publication Date: March 2013 Print ISBN: 978-1-60650-269-3 $120.95 Ebook ISBN: 978-1-60650-271-6 $109.00

This book presents contemporary theoretical methods in fluid flow and heat transfer, emphasizing principles of investigation and modeling of natural phenomena and engineering processes. More than a hundred examples show the applicability of the methods in such areas as nuclear reactors, aerospace, crystal growth, turbine blades, electronics packaging, optical fiber coating, wire casting, blood flow, urinary problems, and food processing. Intended for practicing engineers and students, the book balances strong formulation of problems with detailed explanations of definitions and terminology. Author comments give attention to special terms like singularity, order of magnitude, flow stability, and nonisothermicity characteristics.

Pages: 385 Mechanical engineering

PEM Fuel Cells Thermal and Water Management Fundamentals Yun Wang, Ken S. Chen, and Sun Chan Cho Polymer Electrolyte Membrane (PEM) fuel cells hold great promise as a potential alternative to conventional fossil-fuel-powered energy sources. However, they produce waste heat, and the water used in their system must be carefully controlled and monitored. This book offers the most up-to-date research on advanced methods for managing both waste heat and monitoring water flows and water concentration in PEM fuel cells. The most workable solutions to these problems and the challenges that still lie ahead are emphasized. The reader will find: Publication Date: April 2013 Print ISBN: 978-1-60650-245-7 $76.95 Ebook ISBN: 978-1-60650-247-1 $69.00

Pages: 386

• A review of multi-component mass transport phenomena, particularly as they apply to gas flow and hydrogen and air flow • Coverage of multi-phase flow and heat transfer characteristics of PEM fuel cells • Unique coverage of solid water phase behavior of PEM fuel cells and subfreezing temperature operation.

Mechanical engineering

12

Momentum Press • 4th Quarter 2013 Catalog

Recently Published Chemical Sensors: Simulation and Modeling Volume 5: Electrochemical Sensors Edited by Ghenadii Korotcenkov

Publication Date: July 2013 Print ISBN: 978-1-60650-596-0 $199.95 Ebook ISBN: 978-1-60650-598-4 $180.00

Pages: 408 mechanical engineering

Momentum Press is proud to bring to you Chemical Sensors: Simulation and Modeling Volume 5: Electrochemical Sensors, edited by Ghenadii Korotcenkov. This is the fifth of a five-volume comprehensive reference work that provides computer simulation and modeling techniques in various fields of chemical sensing. The important applications for chemical sensing include such topics as bulk and surface diffusion, adsorption, surface reactions, sintering, conductivity, mass transport, and interphase interactions. In this fifth volume, you will find background and guidance on: • Modeling and simulation of electrochemical processes in both solid and liquid electrolytes, including charge separation and transport (gas diffusion, ion diffusion) in membranes, protonelectron transfers, electrode reactions, etc. • Various models used to describe electrochemical sensors such as potentiometric, amperometric, conductometric, impedimetric, and ionsensitive FET sensors

800.689.2432 • momentumpress.net

13

Published in 2012 Chitosan and Its Derivatives as Promising Drug Delivery Carriers By M. Prabaharan Publication Date: October 2012 Print ISBN: 978-1-60650-423-9 $89.95 Ebook ISBN: 978-1-60650-413-0 $81.00 Pages: 80

Photodynamic Therapy Mediated by Fullerenes and their Derivatives By Mike Hamblin Publication Date: October 2012 Print ISBN: 978-1-60650-426-0 $89.95 Ebook ISBN: 978-1-60650-416-1 $81.00 Pages: 60

biomedical engineering

biomedical engineering

Mobile Wearable Nano-Bio Health Monitoring Systems with Smartphones as Base Stations By Vijay K. Varadan and Linfeng Chen Publication Date: October 2012 Print ISBN: 978-1-60650-424-6 $89.95 Ebook ISBN: 978-1-60650-414-7 $81.00 Pages: 80

Silica Nanoparticles as Drug Delivery System for Immunomodulator GMDP By E.V. Parfenyuk, N.A. Alyoshina, and Yu S.Antsiferova Publication Date: October 2012 Print ISBN: 978-1-60650-421-5 $89.95 Ebook ISBN: 978-1-60650-395-9 $81.00 Pages: 60

biomedical engineering

biomedical engineering

Nanoparticles and Brain Tumor Treatment By Gerardo Caruso, Maria Caffo, and Giuseppe Raudino Publication Date: September 2012 Print ISBN: 978-1-60650-422-2 $89.95 Ebook ISBN: 978-1-60650-408-6 $81.00 Pages: 80 Biomedical engineering

Nanotechnology in Medicine Emerging Applications By Eugene Koprowski Publication Date: February 2012 Print ISBN: 978-1-60650-248-8 $84.95 Ebook ISBN: 978-1-60650-250-1 $76.00 Pages: 172 Biomedical engineering

Catching the Process Fieldbus An Introduction to PROFIBUS for Process Automation By James Powell and Henry Vandelinde Publication Date: September 2012 Print ISBN: 978-1-60650-396-6 $76.95 Ebook ISBN: 978-1-60650-398-0 $70.00 Pages: 172 Manufacturing engineering

Going the Distance Solids Level Measurement with Radar By Tim Little and Henry Vandelinde Publication Date: September 2012 Print ISBN: 978-1-60650-400-0 $76.95 Ebook ISBN: 978-1-60650-402-4 $70.00 Pages: 134 Manufacturing engineering

14

Momentum Press • 4th Quarter 2013 Catalog

Published in 2012 Plant IT Integrating Information Technology into Automated Manufacturing By Dennis L. Brandl Publication Date: December 2012 Print ISBN: 978-1-60650-431-4 $109.99 Ebook ISBN: 978-1-60650-433-8 $99.00 Pages: 140

Variable Speed Drives Principles and Applications for Energy Cost Savings, Fourth Edition By David W. Spitzer Publication Date: September 2012 Print ISBN: 978-1-60650-363-8 $131.95 Ebook ISBN: 978-1-60650-365-2 $119.00 Pages: 220

Manufacturing engineering

Manufacturing engineering

Quality Recognition & Prediction Smarter Pattern Technology with the Mahalanobis-Taguchi System By Shoichi Teshima, Yoshiko Hasegawa, and Kazuo Tatebayashi Publication Date: June 2012 Print ISBN: 978-1-60650-342-3 $153.95 Ebook ISBN: 978-1-60650-344-7 $139.00 Pages: 230

An Introduction to Transport Phenomena In Materials Engineering, Second Edition By David Gaskell Publication Date: August 2012 Print ISBN: 978-1-60650-355-3 $219.95 Ebook ISBN: 978-1-60650-357-7 $198.00 Pages: 664

Manufacturing Engineering

Materials Science and Engineering

Solids Level Measurement and Detection Handbook Emerging Applications By Joe Lewis Publication Date: February 2012 Print ISBN: 978-1-60650-254-9 $108.95 Ebook ISBN: 978-1-60650-256-3 $98.00 Pages: 208

Characterization of Tribological Materials Second Edition Publication Date: December 2012 By William A. Glaeser, C. Richard Brundle, and Charles A. Evans, Jr. Print ISBN: 978-1-60650-257-0 $109.95 Ebook ISBN: 978-1-60650-259-4 $99.00 Pages: 180

Manufacturing engineering

Textile Processes Quality Control and Design of Experiments By Georgi Damyanov and Diana Germanova-Krasteva Publication Date: November 2012 Print ISBN: 978-1-60650-387-4 $219.95 Ebook ISBN: 978-1-60650-389-8 $198.00 Pages: 240

Materials Science and Engineering

Modeling Solid-State Precipitation By Ernst Kozeschnik Publication Date: December 2012 Print ISBN: 978-1-60650-062-0 $219.95 Ebook ISBN: 978-1-60650-064-4 $198.00 Pages: 464 Materials science and engineering

Manufacturing engineering

800.689.2432 • momentumpress.net

15

Published in 2012 Polymer Testing New Instrumental Methods By Muralisrinivasan Subramanian Publication Date: June 2012 Print ISBN: 978-1-60650-242-6 $131.95 Ebook ISBN: 978-1-60650-244-0 $119.00 Pages: 220 Materials science and engineering

Solid-State NMR Basic Principles & Practice By David C. Apperley, Robin K. Harris, and Paul Hodgkinson Publication Date: June 2012 Print ISBN: 978-1-60650-350-8 $120.95 Ebook ISBN: 978-1-60650-352-2 $109.00 Pages: 280 Materials Science and Engineering

Aerospace Sensors By Alexander Nebylov Publication Date: December 2012 Print ISBN: 978-1-60650-059-0 Ebook ISBN: 978-1-60650-061-3 Pages: 348

Chemical Sensors: Simulation and Modeling—Volume 2: Conductometric-Type Sensors By Ghendaii Korotcenkov Publication Date: June 2012 Print ISBN: 978-1-60650-312-6 $230.95 Ebook ISBN: 978-1-60650-314-0 $219.00 Pages: 300 Mechanical engineering

Chemical Sensors: Simulation and Modeling—Volume 3: Solid-State Devices By Ghenadii Korotcenkov Publication Date: December 2012 Print ISBN: 978-1-60650-315-7 $230.95 Ebook ISBN: 978-1-60650-317-1 $219.00 Pages: 517 Mechanical engineering

$219.95 $198.00

Mechanical engineering

Chemical Sensors: Simulation and Modeling—Volume 1: Microstructural Characterization and Modeling of Metal Oxides By Ghenadii Korotcenkov Publication Date: June 2012 Print ISBN: 978-1-60650-309-6 $230.95 Ebook ISBN: 978-1-60650-311-9 $219.00 Pages: 440

The Essentials of Finite Element Modeling and Adaptive Refinement For Beginning Analysts to Advanced Researchers in Solid Mechanics By John O. Dow Publication Date: June 2012 Print ISBN: 978-1-60650-332-4 $109.95 Ebook ISBN: 978-1-60650-334-8 $99.00 Pages: 271 Mechanical engineering

Mechanical engineering

16

Momentum Press • 4th Quarter 2013 Catalog

Backlist Construction Crew Supervision 50 Take Charge Leadership Techniques & Light Construction Glossary By Karl F. Schmid Publication Date: November 2009 Print ISBN: 978-1-60650-077-4 $39.95 Ebook ISBN: 978-1-60650-078-1 $37.00 Pages: 228

The Engineering Language A Consolidation of the Words and Their Definitions Publication Date: January 2010 By Ronald Hanifan Print ISBN: 978-1-60650-206-8 $36.95 Ebook ISBN: 978-1-60650-208-2 $33.00 Pages: 280

Civil Engineering

engineering General reference

Construction Estimating: A Step-by-Step Guide to a Successful Estimate By Karl F. Schmid Publication Date: September 2011 Print ISBN: 978-1-60650-292-1 $48.95 Ebook ISBN: 978-1-60650-293-8 $44.00 Pages: 305

Climate Change: The Fork at the End of Now By Micha Tomkiewicz, Ph.D Publication Date: June 2011 Print ISBN: 978-1-60650-272-3 Ebook ISBN: 978-1-60650-274-7 Pages: 320

$96.95 $87.00

Civil Engineering

Environmental Science and Engineering

Professional Expression To Organize, Write, and Manage for Technical Communication By P.E. Morris, M.D. Publication Date: July 2009 Print ISBN: 978-1-60650-071-2 $30.95 Ebook ISBN: 978-1-60650-072-9 $28.00 Pages: 204

Advanced Regulatory Control Applications and Techniques By David W. Spitzer Publication Date: October 2009 Print ISBN: 978-1-60650-124-5 $60.95 Ebook ISBN: 978-1-60650-126-9 $54.00 Pages: 158

engineering General reference

Social Media for Engineers and Scientists By Jon DiPietro Publication Date: November 2011 Print ISBN: 978-1-60650-251-8 $48.95 Ebook ISBN: 978-1-60650-253-2 $44.00 Pages: 228 engineering General reference

Manufacturing Engineering

Alarm Management for Process Control A Best-Practice Guide for Design, Implementation, and Use of Industrial Alarm Systems By Douglas H. Rothenberg Publication Date: September 2009 Print ISBN: 978-1-60650-003-3 $175.95 Ebook ISBN: 978-1-60650-005-7 $159.00 Pages: 610 Manufacturing Engineering

800.689.2432 • momentumpress.net

17

Backlist Industrial Resource Utilization and Productivity Understanding the Linkages By Anil Mital, Ph.D. and Arun Pennathur, Ph.D. Publication Date: August 2010 Print ISBN: 978-1-60650-130-6 $84.95 Ebook ISBN: 978-1-60650-132-0 $76.00 Pages: 262 Manufacturing Engineering Process Control Case Histories An Insightful and Humorous Perspective from the Control Room By Gregory K. McMillan Publication Date: March 2010 Print ISBN: 978-1-60650-176-4 $36.95 Ebook ISBN: 978-1-60650-177-1 $33.00 Pages: 128 Manufacturing Engineering Protecting Industrial Control Systems from Electronic Threats By Joseph Weiss Publication Date: June 2010 Print ISBN: 978-1-60650-197-9 $108.95 Ebook ISBN: 978-1-60650-199-3 $98.00 Pages: 338 Manufacturing Engineering

Raw and Finished Materials: A Concise Guide to Properties and Applications By Brian Dereu Publication Date: November 2011 Print ISBN: 978-1-60650-073-6 $84.95 Ebook ISBN: 978-1-60650-075-0 $76.00 Pages: 285 Manufacturing Engineering

Robust Control System Networks: How to Achieve Reliable Control After Stuxnet, By Ralph Langner Publication Date: September 2011 Print ISBN: 978-1-60650-300-3 $96.95 Ebook ISBN: 978-1-60650-302-7 $87.00 Pages: 206 Manufacturing Engineering

The WBF Book Series: ISA-95 Implementation Experiences, By WBF Publication Date: February 2011 Print ISBN: 978-1-60650-215-0 $96.95 Ebook ISBN: 978-1-60650-217-4 $87.00 Pages: 278 Manufacturing Engineering

The WBF Book Series: ISA-88 and ISA-95 in the Life Science Industries By WBF Publication Date: March 2011 Print ISBN: 978-1-60650-203-7 $96.95 Ebook ISBN: 978-1-60650-205-1 $87.00 Pages: 220 Manufacturing Engineering

THE WBF BOOK SERIES: ISA 88 Implementation Experiences, By The WBF Publication Date: December 2010 Print ISBN: 978-1-60650-212-9 $96.95 Ebook ISBN: 978-1-60650-214-3 $87.00 Pages: 292 Manufacturing Engineering

THE WBF BOOK SERIES: Applying ISA 88 In Discrete and Continuous Manufacturing By The WBF Publication Date: December 2010 Print ISBN: 978-1-60650-200-6 $96.95 Ebook ISBN: 978-1-60650-202-0 $87.00 Pages: 227 Manufacturing Engineering

18

Momentum Press • 4th Quarter 2013 Catalog

Backlist Bonds and Bands in Semiconductors, Second Edition By J. C. Phillips and Gerald Lucovsky Publication Date: November 2009 Print ISBN: 978-1-60650-133-7 $120.95 Ebook ISBN: 978-1-60650-135-1 $109.00 Pages: 352

Characterization of Ceramics By Ronald E. Loehman, C. Richard Brundle, and Charles A. Evans, Jr. Publication Date: March 2010 Print ISBN: 978-1-60650-194-8 $108.95 Ebook ISBN: 978-1-60650-196-2 $98.00 Pages: 295

Materials Science and Engineering

Materials Science and Engineering

Characterization in Compound Semiconductor Processing By Gary E. McGuire, Yale E. Strausser, and C. Richard Brundle Publication Date: January 2010 Print ISBN: 978-1-60650-041-5 $108.95 Ebook ISBN: 978-1-60650-043-0 $98.00 Pages: 212

Characterization of Composite Materials By Hatsuo Ishida, C. Richard Brundle, and Charles A. Evans, Jr. Publication Date: March 2010 Print ISBN: 978-1-60650-191-7 $108.95 Ebook ISBN: 978-1-60650-193-1 $98.00 Pages: 277

Materials Science and Engineering

Materials Science and Engineering

Characterization in Silicon Processing By Yale E.Strausser, C. Richard Brundle, and Charles A. Evans, Jr. Publication Date: January 2010 Print ISBN: 978-1-60650-109-2 $108.95 Ebook ISBN: 978-1-60650-111-5 $98.00 Pages: 240

Characterization of Integrated Circuit Packaging Materials By Thomas M. Moore, Robert G. McKenna, and C. Richard Brundle Publication Date: March 2010 Print ISBN: 978-1-60650-187-0 $108.95 Ebook ISBN: 978-1-60650-189-4 $98.00 Pages: 274

Materials Science and Engineering

Materials Science and Engineering

Characterization of Catalytic Materials By Israel E. Wachs, C. Richard Brundle, and Charles A. Evans, Jr. Publication Date: March 2010 Print ISBN: 978-1-60650-184-9 $108.95 Ebook ISBN: 978-1-60650-186-3 $98.00 Pages: 202

Characterization of Metals and Alloys By Paul H. Holloway, P. N. Vaidyanathan, and C. Richard Brundle Publication Date: December 2009 Print ISBN: 978-1-60650-047-7 $108.95 Ebook ISBN: 978-1-60650-049-1 $98.00 Pages: 310

Materials Science and Engineering

Materials Science and Engineering

800.689.2432 • momentumpress.net

19

Backlist Characterization of Optical Materials By Gregory J. Exarhos, C. Richard Brundle, and Charles A. Evans, Jr. Publication Date: March 2010 Print ISBN: 978-1-60650-050-7 $108.95 Ebook ISBN: 978-1-60650-052-1 $98.00 Pages: 212 Materials Science and Engineering

Characterization of Organic Thin Films By Abraham Ulman, C. Richard Brundle, and Charles A. Evans, Jr. Publication Date: January 2010 Print ISBN: 978-1-60650-044-6 $108.95 Ebook ISBN: 978-1-60650-046-0 $98.00 Pages: 276 Materials Science and Engineering

Characterization of Polymers By Ned J. Chou, Stephen P. Kowalczyk, and Ravi Saraf Publication Date: March 2010 Print ISBN: 978-1-60650-053-8 $108.95 Ebook ISBN: 978-1-60650-055-2 $98.00 Pages: 320 Materials Science and Engineering Plastics Technology Handbook: Volume 1 Introduction, Properties, Fabrication, Processes By Don Rosato, Marlene G. Rosato, and Nick R. Schott Publication Date: October 2010 Print ISBN: 978-1-60650-079-8 $423.95 Ebook ISBN: 978-1-60650-081-1 $382.00 Pages: 1,456 Materials Science and Engineering

20

Plastics Technology Handbook: Volume 2 Manufacturing, Composites, Tooling, Auxiliaries Edited by: Donald V. Rosato, Marlene G. Rosato, Nick R. Schott Publication Date: October 2011 Print ISBN: 978-1-60650-082-8 $423.95 Ebook ISBN: 978-1-60650-084-2 $382.00 Pages: 966 Materials Science and Engineering

Diffuse Scattering and the Fundamental Properties of Materials By Rozaliya Barabash, Gene E. Ice, and Patrice E.A. Turchi Publication Date: April 2009 Print ISBN: 978-1-60650-000-2 $181.95 Ebook ISBN: 978-1-60650-002-6 $163.00 Pages: 444 Materials Science and Engineering

Acoustic High-Frequency Diffraction Theory By Frédéric Molinet Publication Date: May 2011 Print ISBN: 978-1-60650-100-9 Ebook ISBN: 978-1-60650-102-3 Pages: 474

$146.95 $132.00

Mechanical Engineering

Automotive Sensors By John Turner and Joe Watson Publication Date: March 2009 Print ISBN: 978-1-60650-009-5 Ebook ISBN: 978-1-60650-011-8 Pages: 278

$131.95 $119.00

Mechanical engineering

Momentum Press • 4th Quarter 2013 Catalog

Backlist Bio-Inspired Engineering By Christopher H. M. Jenkins Publication Date: December 2011 Print ISBN: 978-1-60650-223-5 Ebook ISBN: 978-1-60650-225-9 Pages: 156

$133.95 $120.00

Mechanical engineering

Biomedical Sensors By Deric P. Jones and Joe Watson Publication Date: November 2010 Print ISBN: 978-1-60650-056-9 Ebook ISBN: 978-1-60650-058-3 Pages: 320

Mechanical engineering

$153.95 $143.00

Mechanical engineering

Centrifugal and Axial Compressor Control By Gregory K. McMillan Publication Date: March 2010 Print ISBN: 978-1-60650-173-3 Ebook ISBN: 978-1-60650-174-0 Pages: 140

Chemical Sensors : Fundamentals of Sensing Materials — Volume 2: Nanostructured Materials By Ghenadii Korotcenkov Publication Date: November 2011 Print ISBN: 978-1-60650-106-1 $241.95 Ebook ISBN: 978-1-60650-108-5 $218.00 Pages: 450 Chemical Sensors: Fundamentals of Sensing Materials ­— Volume 3: Polymers and Other Materials Edited by Ghenadii Korotcenkov Publication Date: January 2011 Print ISBN: 978-1-60650-230-3 $241.95 Ebook ISBN: 978-1-60650-232-7 $218.00 Pages: 380 Mechanical Engineering

$48.95 $44.00

Mechanical engineering

Chemical Sensors: Fundamentals of Sensing Materials — VOLUME 1: General Approaches By Ghenadii Korotcenkov Publication Date: September 2010 Print ISBN: 978-1-60650-103-0 $241.95 Ebook ISBN: 978-1-60650-105-4 $218.00 Pages: 528 Mechanical engineering

Chemical Sensors: Comprehensive Sensor Technologies — Volume 4: Solid State Devices Edited by Ghenadii Korotcenkov Publication Date: May 2011 Print ISBN: 978-1-60650-233-4 $241.95 Ebook ISBN: 978-1-60650-235-8 $218.00 Pages: 380 Mechanical Engineering

Chemical Sensors: Comprehensive Sensor Technologies ­— Volume 5: Electrochemical and Optical Sensors Edited by Ghenadii Korotcenkov Publication Date: July 2011 Print ISBN: 978-1-60650-236-5 $241.95 Ebook ISBN: 978-1-60650-238-9 $218.00 Pages: 370 Mechanical Engineering

800.689.2432 • momentumpress.net

21

Backlist Chemical Sensors: Comprehensive Sensor Technologies ­— Volume 6: Chemical Sensors Applications Edited by Ghenadii Korotcenkov Publication Date: November 2011 Print ISBN: 978-1-60650-239-6 $241.95 Ebook ISBN: 978-1-60650-241-9 $218.00 Pages: 382 Mechanical engineering

Reduce Your Engineering Drawing Errors Preventing the Most Common Mistakes By Ronald Hanifan Publication Date: May 2010 Print ISBN: 978-1-60650-210-5 $43.95 Ebook ISBN: 978-1-60650-211-2 $40.00 Pages: 100 Mechanical engineering

Virtual Engineering By Joe Cecil Publication Date: March 2010 Print ISBN: 978-1-60650-097-2 Ebook ISBN: 978-1-60650-099-6 Pages: 158

$84.95 $76.00

Mechanical engineering

22

Momentum Press • 4th Quarter 2013 Catalog

A New Series from Momentum Press and ASME Press! The Technologies for Sustainable Life Series

Simon Pollard, PhD, Series Editor Nancy Cromar, PhD and Derek Dunn-Rankin, PhD, Associate Editors This new concise monograph series (comprised of small contributions of 50-100 pages each) provides perspectives and applications of engineering technologies to a sustainable, low carbon economy. Written by leading experts in environmental engineering, pollution control and environmental policy, the series is intended to furnish the 21st century engineer with a practical and well-rounded introduction concerning the new sustainability agenda—one focused on energy resource efficiency, linked infrastructures and integrated policy design. Each concise monograph offers a definitive analysis of its subject, with an applied focus that promotes engineering relevance and the contribution of technology to the sustainability agenda. Following an introduction to the key issues and the tenets of systems thinking, the series adopts a ‘resource cycle’ logic; progressing through a discussion of ecosystems and natural resources, materials extraction and flow through economies and then sustainable manufacturing and energy utilization. These themes are then linked to the cross-cutting aspects of pollution control and, finally, organizational governance and policy development. Forthcoming topical groups within the series will include: Ecosystems and natural resources; Technologies for a sustainable life; Sustainable design, manufacturing and consumption; Energy and resource management; Environment, pollution and human health; and Governance, policy, citizens and the firm. To submit a proposal for consideration and further information, contact the commissioning editor, Dr. Nigel Hollingworth at: [email protected]

And Continuing To Grow from ASME and MP… The Biomedical & Nanomedical Technologies Series Ahmed Al-Jumaily and Chris Jenkins, Series Editors This series continues to add new books which provide a mixture of both theoretical and practical content that will appeal to engineers in both academia and industry. For both series, ASME Press will sell the print editions of these titles in North and South America. Momentum Press will sell the electronic version in these regions as well as worldwide, and the print editions throughout the rest of the world. Authors from the wide range of science and engineering—from academia, research institutions and industry—who are involved in conception, design, development, analysis and operation of biomedical and biotechnological systems, materials and applications are invited to contribute. To submit a proposal for consideration and further information, please contact commission editor Dr. Nigel Hollingworth at [email protected].

800.689.2432 • momentumpress.net

23

Solutions for the Engineering Community

Announcing a New Publishing Program

The MP Collections

Momentum Press is proud to announce a new publishing program — The MP Collections. These applied, concise titles (with an average page count of 150) will be on various engineering topics, and aimed at advanced engineering students. Content in these collections will be ideal for course readings and research in specialty areas less covered by introductory textbooks and research monographs. We are actively seeking editors to head up these collections of titles, as well as authors to write individual books. Collection editors will work closely with our editorial staff to select topics and drive the direction of the content within each subject area. Once established, the collections will be marketed to faculty for course adoption, but predominantly to university libraries, where MP offers unrestricted, and perpetual access to digital content through university libraries, rendering our content easily accessible to all. If you have an interest (or have friends or colleagues in engineering that might want to participate in this publishing program), please let us know. Shoshanna Goldberg ([email protected], 781-710-3097): Electrical Engineering Computer Science & Engineering Civil & Environmental Engineering Industrial Engineering Joel Stein ([email protected], 732-828-0616): Mechanical Engineering Materials Science & Engineering Chemical Engineering

24

Momentum Press • 4th Quarter 2013 Catalog

Additional Information

How to Place an Order USA & Canada

Latin America

AIDC Online | www.momentumpress.net Phone | 800.689.2432 Email | [email protected]

Cranbury International LLC Online | www.cranburyinternational.com Phone | 802.223.6565 Email | [email protected] Contact | Ethan Atkin

Europe, Middle East & Africa McGraw-Hill Professional Online | www.mcgraw-hill.co.uk Email | [email protected] Phone | +44 (0) 1628 502700 Fax | +44 (0) 1628 635895

Asia McGraw-Hill Education 60 Tuas Basin Link, Singapore 638775 Online | www.mheducation.asia Email | [email protected] Phone | (65) 6863 1580 Fax | (65) 6862 3354

Australia & New Zealand McGraw-Hill Education Online | www.mcgraw-hill.com.au Email | [email protected] Phone | 61 2 9900 1800 Fax | 61 2 9900 1980

India & South Asia Tata McGraw-Hill Education Pvt. Ltd. Phone | +91-120-438 3400 Fax | +91-120-438 3401-403 Email | [email protected] Contact | Ms. Rekha Dhyani

Request a Desk Copy For Textbook Adoption Please visit our website, www.momentumpress.net, to request a desk copy.

LIBRARY SALES [email protected] (For more Information, see the back of this catalog)

800.689.2432 • momentumpress.net

25

What the experts are saying about Robust Control System Networks: How to Achieve Reliable Control After Stuxnet (Ralph Langer):  “...the first great, 5-star ICS security book.“  Dale Peterson, Digital Bond

“...brief, concise, well-written, full of compelling anecdotes, and groundbreaking.” Richard Bejtlich, TaoSecurity

ebooks for the engineering Library Create your own Customized Content Bundle  — the more books you buy, the higher your discount! The Content • • • • •

Manufacturing Engineering Mechanical & Chemical Engineering Materials Science & Engineering Civil & Environmental Engineering General Reference

The Terms • • • • •

Perpetual access for a one-time fee No subscriptions or access fees Unlimited concurrent usage Downloadable PDFs Free MARC records

To learn more, visit: http://www.momentumpress.net/library For more information or to set up a free trial, contact: [email protected]

Solutions for the Engineering Community

JFM-2013 ISBN 978-1-60650-190-0