Module6-handling Devices
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Module6-handling Devices as PDF for free.
More details
- Words: 546
- Pages: 7
KEMENTERIAN PELAJARAN MALAYSIA
Self Access Learning Module
ICT Literacy for Secondary School Programme
Computer Hardware Basic Maintenance Handling Input and Output Devices
PUSAT PERKEMBANGAN KURIKULUM KEMENTERIAN PELAJARAN MALAYSIA
ICTL for Secondary School - Computer Hardware Module
MODULE 6
HANDLING INPUT AND OUTPUT DEVICES
Curriculum Development Centre Ministry of Education Malaysia
1
ICTL for Secondary School - Computer Hardware Module
1.
Name of Module :
2.
Learning Outcomes: The students should be able to:
3.
Basic Maintenance – Handling input and output devices
•
to set up the input and output devices correctly
•
state the steps to connect the peripherals to system unit
•
powering the system
Knowledge and Skills 1. Connecting the peripherals 2. Powering the system
4.
Module Summary: At the end of the module, students should be able to connect peripherals; monitor, keyboard, mouse and speaker to the system unit
This module contains 5 activities:
Activity 1:
Naming the peripheral port on the system unit
Activity 2:
Connecting the Monitor to the system unit
Activity 3:
Connecting the Keyboard and mouse to the system unit
Activity 4:
Connecting the Speaker to the system unit
Activity 5:
Powering the System
2
ICTL for Secondary School - Computer Hardware Module
Activity 1:
Naming the Peripherals Port
No:
Label of the ports
1
Power port
2
PS2 port (Mouse)
3
PS2 port (keyboard)
4
USB port
5
Parallel port (printer port)
6
Serial port (Modem)
7
VGA port (Monitor display)
8
Game port (Joystick)
9,10,11 Audio ports (speaker, headphone and microphone) ( 9-Line Out, 10Line In, 11-Mic)
Figure 1: Back view of the System Unit (ports)
3
ICTL for Secondary School - Computer Hardware Module
Activity 2:
Connecting the Monitor to the system unit
Steps: 1. Plug the VGA cable of the monitor to the display device port as in Figure 2. The VGA cable is blue in colour must be connected to the display that has the same colour. Students must connect the tiny pin on VGA cable carefully.
Figure 2: Connecting VGA cable to monitor port
Activity 3:
Connecting the Keyboard and mouse to the system unit
1. Plug the PS2 cable of the keyboard (purple nozzle) and mouse (green nozzle) to the device port as Figure 3.1. Students also need to be extremely careful to attach the keyboard and mouse to their respective PS/2 port. For keyboard and mouse that have USB toggle use Figure 3.2
Figure 3.1 : Connecting keyboard and mouse to the PS2 ports
4
ICTL for Secondary School - Computer Hardware Module
Figure 3.2 : Connecting keyboard and mouse to the USB ports
Activity 4:
Connecting Audio and Microphone Devices to the system unit
1. Plug the cable of the speaker (green nozzle) and microphone (blue nozzle) to the device port as figure 4.
Figure 4 : Connecting peripherals Audio and Microphone to the Audio ports
5
ICTL for Secondary School - Computer Hardware Module
Activity 5:
Powering the System
Steps: 1. Plug in the power cord and switch the power supply switch to the ‘On’ position. 2. Press the power button. If everything is connected as it should be, all system fans should start spinning. You should hear a single beep, and after 2-5 seconds, the computer will start to boot.
Figure 5: Connecting the power cable
6
Self Access Learning Module
ICT Literacy for Secondary School Programme
Computer Hardware Basic Maintenance Handling Input and Output Devices
PUSAT PERKEMBANGAN KURIKULUM KEMENTERIAN PELAJARAN MALAYSIA
ICTL for Secondary School - Computer Hardware Module
MODULE 6
HANDLING INPUT AND OUTPUT DEVICES
Curriculum Development Centre Ministry of Education Malaysia
1
ICTL for Secondary School - Computer Hardware Module
1.
Name of Module :
2.
Learning Outcomes: The students should be able to:
3.
Basic Maintenance – Handling input and output devices
•
to set up the input and output devices correctly
•
state the steps to connect the peripherals to system unit
•
powering the system
Knowledge and Skills 1. Connecting the peripherals 2. Powering the system
4.
Module Summary: At the end of the module, students should be able to connect peripherals; monitor, keyboard, mouse and speaker to the system unit
This module contains 5 activities:
Activity 1:
Naming the peripheral port on the system unit
Activity 2:
Connecting the Monitor to the system unit
Activity 3:
Connecting the Keyboard and mouse to the system unit
Activity 4:
Connecting the Speaker to the system unit
Activity 5:
Powering the System
2
ICTL for Secondary School - Computer Hardware Module
Activity 1:
Naming the Peripherals Port
No:
Label of the ports
1
Power port
2
PS2 port (Mouse)
3
PS2 port (keyboard)
4
USB port
5
Parallel port (printer port)
6
Serial port (Modem)
7
VGA port (Monitor display)
8
Game port (Joystick)
9,10,11 Audio ports (speaker, headphone and microphone) ( 9-Line Out, 10Line In, 11-Mic)
Figure 1: Back view of the System Unit (ports)
3
ICTL for Secondary School - Computer Hardware Module
Activity 2:
Connecting the Monitor to the system unit
Steps: 1. Plug the VGA cable of the monitor to the display device port as in Figure 2. The VGA cable is blue in colour must be connected to the display that has the same colour. Students must connect the tiny pin on VGA cable carefully.
Figure 2: Connecting VGA cable to monitor port
Activity 3:
Connecting the Keyboard and mouse to the system unit
1. Plug the PS2 cable of the keyboard (purple nozzle) and mouse (green nozzle) to the device port as Figure 3.1. Students also need to be extremely careful to attach the keyboard and mouse to their respective PS/2 port. For keyboard and mouse that have USB toggle use Figure 3.2
Figure 3.1 : Connecting keyboard and mouse to the PS2 ports
4
ICTL for Secondary School - Computer Hardware Module
Figure 3.2 : Connecting keyboard and mouse to the USB ports
Activity 4:
Connecting Audio and Microphone Devices to the system unit
1. Plug the cable of the speaker (green nozzle) and microphone (blue nozzle) to the device port as figure 4.
Figure 4 : Connecting peripherals Audio and Microphone to the Audio ports
5
ICTL for Secondary School - Computer Hardware Module
Activity 5:
Powering the System
Steps: 1. Plug in the power cord and switch the power supply switch to the ‘On’ position. 2. Press the power button. If everything is connected as it should be, all system fans should start spinning. You should hear a single beep, and after 2-5 seconds, the computer will start to boot.
Figure 5: Connecting the power cable
6
Related Documents
Devices
November 2019 50
Devices Pdf
July 2020 12
External Devices
November 2019 24
Display Devices
June 2020 14
Input Devices
June 2020 43