Milan Man9100x

MIL-9100X Media Conversion System User’s Guide

Sunnyvale, California Minnetonka, Minnesota

LEGAL Trademark Rights © 2004 The MiLAN logo and MiLAN Technology trademarks areregistered trademarks of MiLAN Technology in

the United States and/or other countries. Information in this document is subject to change without notice and does not represent a commitment on the part part of MiLAN Technology. MiLAN Technology provides this document [as is,] without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranty of fitness or merchantability for a particular purpose. MiLAN Technology may make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at any time. This document could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes may be incorporated in new editions of the publication.

The MiLAN Technology Five-Year Limited Warranty MiLAN Technology warrants to the original consumer or purchaser that each of its products, and all components thereof, will be free from defects in material and/or workmanship for a period of five years from the original factory shipment date. Any warranty hereunder is extended to the original consumer or purchaser and is not assignable. MiLAN Technology makes no express or implied warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, except as expressly set forth in this warranty. In no event shall MiLAN Technology be liable for incidental or consequential damages, costs, or expenses arising out of or in connection with the performance of the product delivered here under. MiLAN Technology will in no case cover damages arising out of the product being used in a negligent fashion or manner.

Regulatory Approvals FCC Class UL 195 CSA 22 No. 950 EN60950 CE EN55022 Class A EN50082-1

Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numÈrique de la classe A respecte toutes les exigences du RËglement sur le matÈriel brouilleur du Canada.

European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/ 23/EEC) issued by the commission of the European Community. Compliance with these directives implies conformity to the following European Norms: EN55022 (CISPR 22) - Radio Frequency Interference EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic Immunity EN60950 (IEC950) - Product Safety

Year 2000 Compliance MiLAN Technology warrants that the MIL-9100X is year 2000 compliant. See www.milan.com for additional information on other products. To Contact Technical Support For prompt response when calling for technical support, have the following information ready: product serial number, date of purchase, vendor or place of purchase. Contact one of the following:

Telephone: +1.408.744.2751 or email: [email protected]

Part #: 90000081 Rev. C

Table of Contents

Table of Contents Chapter 1: Introduction Overview of the MIL-9100X .................................................................................. 1-1 Features .................................................................................................................... 1-1 Media Converters ................................................................................................... 1-1

T O C

Chapter 2: Installation Installation Requirements...................................................................................... 2-1 Installing a MIL-9100X ........................................................................................... 2-1 Installing a Second Power Supply........................................................................ 2-2

Appendix A: Specifications Diagnostic LEDs...................................................................................................... A-1 Hardware Features ................................................................................................. A-1 Environmental Operating Conditions ................................................................. A-1

Appendix B: Technical Support Services World Wide Web Server ........................................................................................ B-1 Internet FTP Server................................................................................................. B-1 Contacting Technical Support............................................................................... B-1 Expediting Technical Support Service................................................................. B-1 Returning Procedures ............................................................................................ B-2

Index

MIL-9100X Media Conversion System

iii

Table of Contents

T O C

iv

MIL-9100X Media Conversion System

Ch ap t e r 1 : In tro d u c tio n

Chapter 1 gives an overall description of the MIL-9100X Media Conversion System.

1.1 Overview of the MIL-9100X The MIL-9100X Media Conversion System is an 8-slot rack mount assembly, that can support up to eight different media converters, including a “master” (MiLAN’s MIL-4650) or a “slave” device (MiLAN’s MIL-4655). The master and slave devices are used to manage the MIL-9100X using SNMP.

I N T R O D U C T I O N

The media conversion system can accommodate media converters that support Ethernet, Fast Ethernet, Gigabit Ethernet, ATM or a combination of all these technologies. The MIL-9100X is “hot-swappable,” meaning you can remove and replace media converters without powering down the device. 1.1.1

Features The MIL-9100X offer the following features: • Fits into a 19" rack in a 1U size slot • One on-board power supply, with second bay for one additional hot swappable, load balancing, redundant power supply • Diagnostic LEDs indicating power supply status

1.2 Media Converters The MIL-9100X supports a variety of MiLAN designed devices. Refer to the device’s install guide for configuration and installation information for each device.

MIL-9100X Media Conversion System

1-1

Introduction

Currently, MiLAN Technology’s conversion modules supported include (but not limited to): • MIL-140TRM: Multi-mode media converter; 10BASE-FL to 10BASE-T,

I N T R O D U C T I O N

• MIL-160TRM: Single-mode media converter; 10BASE-FL to 10BASE-T • MIL-170TRM: Single-mode media converter, 10BASE-FL to 10BASE-T • MIL-180CRM/180TRM: Multi-mode media converter; 100BASE-TX to 100BASE-FX • MIL-190CRM: Single-mode media converter; 100BASE-TX to 100BASE-FX, • MIL-240TRM: Media converter; featuring three 100BASETX ports • MIL-1225LSRM: Media converter, 1000BASE-LX to 1000BASE-SX • MIL-1240LSRM: Media converter; 1000BASE to 1000BASE • MIL-4650: Master SNMP agent, 10BASE-T/100BASE-TX • MIL-4655: Slave SNMP Agent

Contact MiLAN sales at (800) 466-4526 for more information on all of these devices.

1-2

MIL-9100X Media Conversion System

Ch ap te r 2 : In s ta lla tio n

Chapter 2 gives installation information for a MIL-9100X Media Converter System.

2.1 Installation Requirements Before installing the MIL-9100X, make sure you have the following: • MIL-9100X Media Converter System • Power supply (two if necessary) • Two, right-angle bracket assemblies • Eight, 440 × 1/4 phillips-head screws

I N S T A L L A T I O N

• Power cord • Standard, Phillips screwdriver (not included)

Figure 2-1. MIL-9100X, with a no Media Converters Installed

2.2 Installing a MIL-9100X To install a MIL-9100X Media Conversion System: 1. Install the two bracket assemblies to each side of the unit: Line up the bracket holes to the holes on the chassis. Use the phillips head screws (supplied) to secure the brackets. MIL-9100X Media Conversion System

2-1

Chapter 2

2. Install the MIL-9100X into a 1U size slot on a rack. Use the phillips head screws (supplied) to secure the device. Note:

For safety reasons, MiLAN recommends that two people install the MIL-9100X. One person should hold the unit, while the other secures the MIL-9100X. Also, excessive charring of the unit will damage internal components and void the warranty.

3. Add the extra power supply (if necessary). I N S T A L L A T I O N

4. Populate the bays with media converters and/or SNMP agents. Refer to the device’s documentation for installation instructions. 5. Plug in the power cord (or cords) into unit and then to the appropriate power supply. Power 1 and/or Power 2 LEDs illuminate. The device is ready for network connections.

2.3 Installing a Second Power Supply 1. At the rear of the print server, remove the screws securing the faceplate and remove it from the chassis. 2. Slide the module into the bay through the guide rails. 3. Insert the module into the card-edge connector. Make sure it is seated firmly. 4. Secure the module with the two screws located on the faceplate of the unit.

2-2

MIL-9100X Media Conversion System

Ap p end ix A : S p e c ific a tio n s

A.1

Diagnostic LEDs Table A-1 describes the status of the unit when an LED lights: Table A-1: Diagnostic LEDs

LED Power 1 Power 2

A.2

Function

Color

System power is applied to the unit from the first power supply System power is applied to the unit from the second power supply

Green Green

Hardware Features Hardware features for the MIL-9100X series: • Enclosure: Two-part aluminum alloy housing (black) • Rack mount: 1U size

S P E C I F I C A T I O N S

• Supports half- and full-duplex modes of operation (see the specific media converter’s documentation) • Power supply: 110/220 VAC with an IEC connector, or a -48 VDC with a Telco connector.

A.3

Environmental Operating Conditions Table A-2: Recommended Operation Conditions

Parameters Operating Temperature Humidity: Non-condensing Altitude test Temperature test (Operating) Temperature test (Packaged)

MIL-9100X Media Conversion System

Minimum +5° C 10% Sea level 5° C -25 ° C

Maximum 40° C 95% 40,000 ft. (at 40° C) 50° C 70° C

A-1

Appendix A

S P E C I F I C A T I O N S

A-2

MIL-9100X Media Conversion System

Appendix B: Technical Support Services B.1

World Wide Web Server Product information, manuals, new product announcements, programs, applications stories and more can be obtained through the world wide web. Our address is: http://www.milan.com

B.2

Internet FTP Server MiLAN has set up an anonymous FTP server for those with access to the internet. The address is ftp.milan.com. Drivers and installation tips are located in the /pub/ MCSys directory.

Note:

B.3

To ensure binary transfer of files, switch to binary mode by entering bin or binary before downloading.

Contacting Technical Support

T E C H S U P P O R T

To contact MiLAN Technology Technical Support:

B.4

• By Phone:

1.408.744.2751

• By Fax:

1.408.744.2771

• By email:

[email protected]

Expediting Technical Support Service For faster service when calling our technical support department: • Be in a position where the computer and the Media Conversion System are accessible • Know the type and versions of software you are using • Know your hardware specification, including memory and

MIL-9100X Media Conversion System

B-1

Appendix B

disk space • Note any and all error messages • Be specific about the problem(s)

B.5

RMA Procedures To return a unit to MiLAN for repair: 1. Call technical support at 408/744-2751

T E C H

2. Technical support engineers will work with users to find the problem. If technical support determines that the unit is defective, a return materials authorization (RMA) will be issued by our RMA administrator who will also provide shipping instructions.

S U P P O R T

Note:

B-2

It is required that any return has an RMA number, or it will be rejected and returned to the sender.

9100X Media Conversion System

Index

Index

Hardware features A-1 Hot-swappable 1-1 http //www.milan.com B-1

Numerics

I

110/220 VAC A-1 1U slot 1-1, 2-2, A-1 206.40.59.2 B-1 -48 VDC A-1 8-slot rack assembly 1-1

Installation Requirements 2-1 Installation requirements 2-1 Installing a MIL-9100X 2-1 Internet access B-1 Internet FTP server B-1

A

L

ATM 1-1

LEDs 1-1, 2-2, A-1

B

M

Bracket assembly 2-1

Fast Ethernet 1-1 Features 1-1 ftp.milan.com B-1 Full-duplex A-1

Media converters 2-2 MIL-1225LSRM 1-2 MIL-1240LSRM 1-2 MIL-140TRM 1-2 MIL-160TRM 1-2 MIL-170TRM 1-2 MIL-180CRM 1-2 MIL-180TRM 1-2 MIL-190CRM 1-2 MIL-240TRM 1-2 MIL-4650 1-1, 1-2 MIL-4655 1-1, 1-2 MIL-9100X 1-1, 2-1, 2-2 Features 1-1 Overview 1-1

G

O

Gigabit Ethernet 1-1

Operating conditions A-1

H

P

Half-duplex A-1

Power cord 2-1 Power supply

D MiLAN sales

(800) 466-4526 1-2 E Ethernet 1-1 F

MIL-9100X Media Conversion System

I N D E X

I-1

Index

Auto-switching 2-1 R Return materials (RMA) B-2

authorization

S Safety tip 2-2 Second power supply Installation 2-2 SNMP agent 1-1, 1-2, 2-2 Specifications A-1 T I N D E X

Technical support B-1 W World wide web server B-1

I-2

MIL-9100X Media Conversion System

MiLAN TECHNOLOGY 1329 Moffett Park Drive Sunnyvale, CA 94089 Part Number: 90000081 Rev. C

Printed in the USA