Brinell Hardness It has a plate form for sample placing,a hand wheel and indentor 10 mm steel ball. Load can be applied upto 3500 kg but we usually go upto 3000 kg It has hanger of 500 kg Force Four 250 Kg weights and four 500 kg weights Make = Shimadzu Japan Rockewell Hardness Tester. There are two such machines placed in Lab. Three scales of 60,100 n 150 load. 2 types of indenter Diamond Cone n Steel Ball Make = Shimadzu Japan Charpy Impact Tester Starting angle 139.5o Used for measuring Toughness Polariscope Used to check internal stresses in Transparent Plastics. Tensometer Limit 2 ton to 20 kN Three types of sample can be tested Strip Type, Wire Type, Round Type. It can be operated Manually or Automatic. Scale is available to read from 300 N to 20 kN Protable Hardness Tester (Brinell Type) 1 round of small needle = 500 Kg.F. Big needle simply shows the force applied. Deep drawing Cupping Machine. To check if a metal can be drawn into sheets or not or to check the drawing capabilities of a metal. Press. For pressing different materials like bakelite applies pressure upto 6000 psi with max temperature of 250oC Impact Test Notch Making Machine Simple used to make a notch(cut) on the sample to be tested in charpy impact test machine Plastic Impact Test Machine. UTM. 100 ton
NEXT TIME I WILL INSHALLAH UPLOAD THE COMPLETE ASSIGNMENT ONE DAY EARLIER THAN SUBMISSION SO KEEP VISITIN THE LINK www.esnips.com/web/ramiz AND REMEMBER ME N’ 05-MET IN PRAYERS