Kidde DAC School
Welcome! Kidde, Fenwal & Chemetron D&C School Instructor: Ken Koerten Customer Technical Services Manager
INTRODUCTIONS •
Distributor personnel: Name Position Company name & location Any Addressable Panel Experience??
PRESENTATION SUMMARY • INTRODUCTION
• FEATURES & BENEFITS
• CHANGE OVER LEGACY
• QUESTIONS
3
1
Kidde DAC School
Multi-loop Addressable Panel
Kidde DAC School
Aries NETLink
MLX
FN8000
MULTI-LOOP PANEL
6
2
AGENCY TESTING & LISTING
FM requirements
• •
ANSI/NFPA-72
•
ANSI/UL864-9
ANSI/UL864-9
• •
Canadian ULC-S527-99
January 11, 2011
March 11, 2011
7
7
FORTHCOMING APPROVALS
NYFD
CSFM
Denver
CA - Seismic
Chicago
USCG 8
APPLICATIONS •
•
•
•
Commercial Industrial High Tech Historic
•
Server Rooms
•
Process Control Rooms
•
Data Processing Areas
•
Electronic Switch Rooms
•
Cabinets
•
Turbines
•
Warehouses
•
Power Generation
•
Museums
•
And more
9
3
PROTECTION SYSTEMS •
FM-200
•
Argonite
•
Novec 1230
•
FE-13
•
CO2
•
Dry Chemical
•
Wet Chemical
•
Foam
•
Water Mist
•
Pre-Action
•
Sprinkler/Deluge
•
Low-rise Fire Alarm 10
• INTRODUCTION
• FEATURES & BENEFITS
• CHANGE OVER LEGACY
• QUESTIONS
11
OUT-OF-THE-BOX FEATURES •
2 SLC w/ 255 addresses each
•
4 x 40 Display-Keypad
•
2 NACs
•
2 Release-NACs
•
3 Programmable Form-C relays
•
1 Trouble Form-C relay
•
2 APO rated 2 A each @ 24 VDC
•
2 USB ports for PC & printer
•
2 RS-232 ports for graphics
NEW
NEW
NEW
12
4
OUT-OF-THE-BOX FEATURES •
RS-485 Annunciator network
•
120/240 V 50/60 Hz AC input
•
5.4 A Power supply unit
•
NEMA 1 enclosure
•
4 programmable soft-switches
•
Ground fault detection by circuit
NEW
NEW
NEW
•
10,000 event log capacity
•
Real Time Clock w/ battery
•
Degrade mode operation
•
Battery replacement reminder
NEW
NEW
13
SLC RELAY R-NAC
CITY-TIE
31 Annunciator Devices Max. ATM-L/R 1 - 16
ICM Bus
Remote LED Annunciator 1-16
IIM Bus
Remote User Interface 1 - 15
Printer
PC Connections
24VDC IN
IIM DACT NETWORK
SYSTEM ARCHITECTURE
RS485
RS485
RS485
RS232
RS485
RS232
USB
USB
R-NAC 1 R-NAC 2
User Interface PMU
SLC1
MicroController
NAC 1 NAC 2
24VDC Switching Power Supply (optional)
24VDC Switching Power Supply
SLC2
MCB – Main Control Board
VFR_1 (TBL) VFR_2 (PROG) VFR_3 (PROG)
12VDC Battery
PSU Supervision
12VDC Battery
VFR_4 (PROG)
14
ENCLOSURE OPTIONS: 3-TIER
Global
PSU & PMU
Expansion Backplane
PSU & PMU
Expansion Backplane
PSU & Control Board
Canadian
Expansion Backplane
Expansion Expansion Backplane
PSU & PMU
12VDC Battery
PSU
12VDC Battery
15
5
ENCLOSURE OPTIONS: 2-TIER
Global
Canadian PSU & PMU
Expansion
PSU & PMU
PSU & Control Board
Expansion Backplane
PSU & PMU
12VDC Battery
PSU
12VDC Battery
16
ENCLOSURE OPTIONS - REMOTE
Remote Display-Control Module
Remote LED Annunciator Module 17
EXPANSION CARD CAGE & BACKPLANE
•
6-module positions per backplane
•
4 backplanes max per panel
•
Provides power & communication to modules
18
6
EXPANSION & FUNCTIONAL MODULES •
Panel supports up to 24 modules SLC (max 6) Release-NAC Relay City-Tie (max 1) DACT (max 1)* ICM (max 1)*
NEW
NIC & FOCC (max 1)*
•
Addressing – no dip switches
* Next Release
19
SLC – MCB & EXPANSION RRM
ASM
Ion
Manual Photo D-A-F Abort Release
Air Sampling
AI
AAM SLC
NAC
ARC •
SLC: MCB 2; Cards 1 each
•
SmartOne Protocol – Backwards Compatible
SLC
– 255 Addresses – No device type restriction – Up to 140 RRMs / unit •
Class A, B and X wiring
•
Disconnect switch
•
Pluggable terminal blocks
Linear Heat
NEW NEW
20
R-NAC – MCB & EXPANSION CARDS •
MCB 4 circuits; Expansion Cards 3 each
•
Field selectable NAC or ARC ARC - Control Heads, Solenoids & Actuators NAC - Horns, Strobes, Bells
•
Pluggable terminal blocks
•
NFPA 72 Disconnect switch
•
R-G-Y Status LED‟s
•
Wiring styles: ARCs: Class A & B NACs: Class & B
NEW NEW NEW
NEW
•
NACs synchronizeA d
•
„Triple-R‟ Redundancy safeguard
21
7
“TRIPLE-R” REDUNDANCY SAFEGUARD TB1
4 3 21
4 3 21
SLC
RS 485
TB15 J5
J3 RS-232 B
RS-232 A
J8
Watchdog Timer
TB4
NO NC C NO NC C
TB8 TB10
NO NC C
High Watchdog
Low
NAC 2
S2
TB3 - -
TB14 NAC 1
+ + Batt Out
1 2 34
Style 4
J10
1 2 34
TB9
NO NC C
Relay 1 Relay 2 Relay 3 Trouble
Main Microprocessor
USB B
TB5
PSU J12 AC IN L N
240
Release 1
120 TB13
TB12 1 2 3 4
Release 2 TB11
Aux 24 VDC TB2
1 2 34
Combo 1 TB7
1 2 34
Combo 2 TB6
1 2 34
1 2 34
Release Circuit
22
RELAYS – MCB & EXPANSION CARD •
4 Form C Relays
•
Each Independently programmable
•
Contacts rated 3A at 30 VDC / 120 VAC
•
Interlocks management: EPO HVAC shutdown Damper closure Building fire alarm BMS systems Zone status annunciation
23
CITY-TIE MODULE •
3 independently operated circuits
•
Municipal Tie Inputs: – Local Energy – Shunt-Trip Master Box – Reverse Polarity
24
8
DIGITAL ALARM COMMUNICATOR TRANSMITTER (DACT)* •
Transmits system status over phone lines
•
SIA and CID formats supported
•
Transmits:
NEW
System Status Normal AC Failure Low Battery Voltage Alarm Per Point System Supervisory System Trouble Ground Fault NAC Trouble Degraded operation due to microprocessor failure * Next release 25
NETWORKING* •
Robust token-passing, peerto-peer protocol
•
Remote configuration upload
•
Sub-network & grouping options
•
Node-level access protection
•
Network-wide access from single point using ICM
•
Master node option
•
Up to 64 nodes
•
2,040 addresses each node
•
130,560 across network
•
Single or Dual Channel operation
* Next release 26
NETWORK CONNECTIVITY OPTIONS
Optic Fiber
Copper
•
Backplane module
•
Daughter module
•
1 module per panel
•
1 module per panel
•
Generates & boosts communications
•
Noise & interference reduction
•
18 AWG
•
•
4,000 ft
62.5/125 or 100/140 multimode duplex media
•
5,280 ft
* Next release
27
9
SINGLE-ZONE WATERLESS SYSTEM SLC
NAC 1: Pre-Alm NAC 2: Pre-Rel / Rel R-NAC 2: Rel R-NAC 1: Actuators or Control Head
28
TWO-ZONE SYSTEM W/ CONTROL HEAD (AND PRE-ACTION SYSTEM)
Pre-Rel. / Rel. (NAC 1)
ASM
Pre-Alm R-NAC 1: Pre-Action Valve
Rel (NAC 2) Pre-Rel. / Rel. (R-NAC 2) Rel (R-NAC 3)
R-NAC 4: Control Head
Pre-action system CANNOT be aborted!! 29
REMOTE-RELEASE MODULE RRM
RRM
Auxiliary Power Supply
30
10
REMOTE-RELEASE MODULE •
Up to 140 modules per control unit
•
Grouping parameter - “Simultaneous” activation - Up to 7 groups of 20 RRMs per group
•
Each module can be in multiple groups
31
PERIPHERAL PRODUCTS
Signaling Line Circuit
RS-232 Communications
PALM
APIC
ORION XT Detector Internet Access*
ASD Detector
RS-485 Communications S2
S1
LK17 LK32 LK16
Out B Out A In B In A W1
+24 V Com PS Flt
A B
*Future
RDCM 1-15
LAM 1-16
Trouble Sup. Sil. Out Pre Alm Alarm Pw r On
Lamp Test Com Ack Reset Silence Drill
LK15
LK14
LK13
LK12
LK11
LK10
LK9
LK8
LK7
LK6
LK5
LK4
LK3
LK2
LK1
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
LK31
LK30
LK29
LK28
LK27
LK26
LK25
LK24
LK23
LK22
LK21
LK20
LK19
LK18
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
Driver Board* 1-16
32
• INTRODUCTION
• FEATURES & BENEFITS
• CHANGE OVER LEGACY
• QUESTIONS
33
11
CHANGES OVER LEGACY PANELS •
Programmable SLC Style/Class all loops
•
Manual Disconnect switches for SLCs, NACs and R-NAC
•
Configurable SLC loop controller to map degrade mode alarm to a NAC on MCB
•
'Autoconfigure' operation for creating a default EOC output control configuration.
•
Alpha numeric password
•
System restart
•
Entering serial number
•
Expanded RRM groups:7 groups of 20 RRMs per group
34
USER INTERFACE – LOCAL & REMOTE 4 x 40 characters
Soft-Keys
Status LEDs
NEW
System Keys
NEW
35
RS-485 ANNUNCIATOR NETWORK •
Supports 31 remote annunciators 1 to 16 LED Annunciators (R-LAM) NEW 1 to 15 User-Interfaces (RDCM) 1 to 16 LED Drivers (ATM-L & ATM-R)*
R-LAM
RDCM
* Next release 36
12
LED ANNUNCIATOR – REMOTE & LOCAL NEW
•
48 independent LED‟s
•
Three system-level LED‟s: Power Trouble Signal Silenced
•
2 functional switches
•
Dual color LED‟s
Local
Remote 37
INTERNET COMMUNICATION MODULE (ICM) •
Provides Internet connectivity
•
Configuration Program download
•
Network-wide access from single node
•
Automatic email notification
•
Event viewing Distributor Internet
Protected Site
Corporate Loss Prevention * Next Release 38
CONFIGURATION SOFTWARE •
Displays & Day/Night/ Annunciators Weekend
PC-based program
•
Expandable configuration
•
Text-Editing for EOC
•
Soft keys
•
Isolation Macros Selective input/output isolations Initiating devices
EOC
Control Board I/O
Network IIM Display Strings Site & System Settings Addressable Devices (SLC) Expandable I/O Modules
Co nfi gu To rati on ol
Control modules and/or on-board outputs •
Separate Test Logs Walk Test Initiating Devices
•
Multi-Alarm Acknowledge
•
Global Alarm Acknowledge
39
13
GROUND FAULT DETECTION •
Voice of Customer Ground fault diagnosis Timely detection
•
Implementation In circuit detection Push button trigger
•
Benefit Fast system commissioning Lower Cost of installation
40
REMOVABLE TERMINALS •
Voice of Customer Ability to isolate outputs Easy & quick
•
Implementation Pluggable & Polarized terminals
•
Benefit Easy system wiring Fast system commissioning Lower Cost of installation
41
HINGED MAIN BOARD •
Voice of Customer Easy access to PSU Field replaceable
•
Implementation Hinged main board Swings open
•
Benefit Faster installation Quick service & checkout
42
14
FLEXIBLE WIRING KNOCKOUTS •
Voice of Customer Multiple conduit penetration Large 1” AC
•
Implementation Triple access knockouts 1” center expansion
•
Benefit Fewer external junction boxes Wiring zone separation
43
POWER SUPPLY OPTIONS •
One common PS across all panels: – Less inventory to stock – Common wiring method – 5 years of proven reliability
•
Expandable to 20 Amps per enclosure
•
Charges up to – 165 AH batteries for UL applications – 132 AH batteries for ULC applications 44
SEAMLESS INTEGRATION NO OTHER COMPETITOR CAN MATCH THIS OFFERING RANGE Control
AND LEVEL OF INTEGRATION
Detection
Suppression
SINGLE POINT OF RESPONSIBILITY 45
15
INSTALLED BASE RETROFIT
MIGRATION STRATEGY
46
INSTALLED BASE RETROFIT •
Voice of Customer
•
Implementation
Reuse existing field wiring & devices
SmartOne protocol PEGAsys
Retrofit Kit •
Benefit Preserve investment Maintain agency approvals Maintain competitive position
ARIES NETLink
47
• INTRODUCTION
• FEATURES & BENEFITS
• CHANGE OVER LEGACY
• QUESTIONS
48
16
QUESTIONS?
Kidde DAC School
Intelligent System Overview
• INTRODUCTION
• INTELLIGENT SYSTEM
• SMARTONE DEVICES
• HANDS ON EXERCISE
51
17
SYSTEM OPERATION Initiate Alarms Annunciate Fire Location Notify Occupants Activate Safety Procedures Release Extinguishing System Call Fire Department
52
SEQUENCE OF OPERATION
Flammable-Liquid Fires Fast Response w/ Minimal Delay
Electrical Fires Staged, Sequential Response
53
SEQUENCE OF OPERATION(ELECTRICAL FIRES)
Pre-Alarm
Smoke Detector
Pre-Release w/ Longer Time Delay
Requires confirmation signal Counting- or Cross-Zoned Detectors
Release signal
Upon expiration of delay and no abort
54
18
DEVICES
• INTRODUCTION
• INTELLIGENT SYSTEM
• SMARTONE DEVICES
• HANDS ON EXERCISE
56
INTELLIGENT VS. CONVENTIONAL SYSTEMS SLC Address 6
Address 5
Address 4
Address 3
Address 2
Address 1
Initiation, control, notification, and release via Signaling Line Circui t
Multiple Discreet Initiating Circuits 57
19
SMARTONE INITIATING DEVICES
Sample for fire signatures every 9 sec Sample rate increases to every 2 sec on initial fire-signature detection Issue alarm if 2 of 3 additional samples are positive
58
SMARTONE COMMUNICATIONS Called Broadcast Indexed Polling Potential 255 addresses broken into 8 groups of 32 addresses each Group 1 Group 2 Group 3
0 - 31 32 - 63 64 - 95
59
BROADCASTS Alternating indexed and group polls Indexed poll checks each group for alarm and trouble messages Group poll checks for device presence when index poll has no alarm or trouble messages responding device when index poll has alarm or trouble messages
60
20
POLL PATTERN
Index
Group 1
Index Group 2
Index Group 3
Index
Group 4
Index Group 5
Index Group 6
Index
Group 7 Index
Group 8 Index
Group 1
Pattern repeats continuously
61
WHEN INDEX POLL POSITIVE Sequentially checks addresses until reporting device is found Handshakes with device to determine device message (i.e., alarm or trouble) Confirms message via follow-up handshakes 3 more for alarm 2 more for trouble 62
• INTRODUCTION
• INTELLIGENT SYSTEM
• SMARTONE DEVICES
• HANDS ON EXERCISE
63
21
SMARTONETM DETECTOR
Alarm (By Detector)
(By Detector)
64
DRIFT COMPENSATION Accounts for changes in detectionchamber output over time Factors that can cause changes Dirt Dust Component Aging
65
DRIFT COMPENSATION Smoke Detectors
Detectors Continuously Monitor – Background obscuration levels – Record levels 256 times per day – Compute daily and accumulated averages – Make first drift compensation after 32 days of operation
66
22
INITIAL DRIFT COMPENSATION
Average obscuration level measured during first 32 days of operation replaces factory cleanair reference value
67
EVERY DAY THEREAFTER
Detector Records Background obscuration levels Averages 256 samples per day
Maintains Continuous 32-day rolling average FIFO
68
FACTORY CALIBRATION
Precise smoke obscuration level
Establishes correlation between obscuration levels and detectionchamber outputs
Clean-air reference value
69
23
AFTER FIRST 32 DAYS OF OPERATION
Precise smoke obscuration level
Adversely alters factory correlation between obscuration levels and detection-chamber outputs
New clean-air value after 32 days Factory clean-air reference value
70
INITIALLY-COMPENSATED DETECTOR New smoke-obscuration calibration level Precise smoke obscuration level Restores factory correlation between obscuration levels and detection-chamber outputs
New clean-air value after 32 days Factory clean-air reference value 71
AGING / DIRTY DETECTOR
Current obscuration calibration level
Adversely alters new correlation between obscuration levels and detection-chamber outputs
New clean-air reference value Previous clean-air reference value
72
24
COMPENSATED DETECTOR Adjusted smoke-obscuration calibration level
Current obscuration calibration level
Restores proper correlation between obscuration levels and detection-chamber outputs
Adjusted clean-air reference value Previous clean-air reference value
73
BENEFIT
Takes the same amount of smoke to activate detector regardless of age or state of cleanliness as long as there is no drift error.
74
AUTOMATIC INITIATING DEVICES • CPD-7052 Ionization Detector • PSD-7152 Photoelectric Detector • THD-7252 Heat Detector • DH-2000
Duct Detector
75
25
IONIZATION DETECTOR No Smoke
Smoke Detection
76
IONIZATION DETECTOR Advantages
Disadvantages
– Small particle detector
– Slow response to large particles (i.e., smoldering fires)
– Fast, flaming fires
– Adversely affected by air flow and ambient pressure
– Good confirmation detector – Sensitivity range 0.5 - 1.5 %/ft.
77
PHOTOELECTRIC DETECTOR Light Source
No Smoke
Light Receiver
Smoke Detection
Light Source
Light Receiver
78
26
PHOTOELECTRIC DETECTOR Advantages
Disadvantages
– Large particle detector
– Slow response to small particles (i.e., flaming fires)
– Slow, smoldering fires – Good early-warning detector
– Adversely affected by dark smoke
– Sensitivity range 0.5 3.5 %/ft.
79
HEAT DETECTOR No Heat
Heat Detection Low Resistance
High Resistance
Thermistor Bead
Thermistor Bead
80
HEAT DETECTOR Advantages
Disadvantages
– Activated by the most reliable fire signature
– Slowest response to fires
– Very large Listed spacing
– Fire is large when detected
– Sensitivity range 135 155°F – Good for dusty environment where smoke detector is not desirable
81
27
DH-2000 DUCT DETECTOR
Always use Photoelectric Detector! 82
MANUAL INITIATING DEVICES
AI
Monitor Module
83
SMARTONE MODULES • AI
Monitor Module
• AO
Control Module
• ASM
Addressable Signal Module
• RRM
Remote Release Module
• Loop Isolator Module
84
28
LOOP ISOLATOR
85
SMARTONE OUTPUT DEVICES AO, ASM and RRM Sequentially activated Approximately 1/2-sec for each output NOTE: AOs must be grouped in order to meet NFPA code when 20 or more AOs are to be activated.
86
ADDRESSABLE SIGNAL MODULE
87
29
ADDRESSABLE SIGNAL MODULE FROM PREVIOUS SLC DEVICE
TO NEXT SLC DEVICE
REGULATED 24 VOLT SUPPLY
NAC
88
REMOTE RELEASE MODULE
89
REMOTE RELEASE MODULE TO NEXT SLC DEVICE
FROM PREVIOUS SLC DEVICE
SLC
REMOTE RELEASE MODULE (RRM) 24VDC
PSU
RELEASE
STATUS
RELEASE DEVICE
REGULATED 24 VOLT SUPPLY
90
30
SPECIALTY MODULES • PALM
AnaLASER-II Interface Module
• APIC
Addressable Protocol Interface Card
• AAM
Addressable AlarmLine Module
PALM
APIC
AAM
91
ANALASER® II INTERFACE MODULE
92
AIR-INTELLIGENCE APIC APIC
Addressable Protocol Interface Card
93
31
ADDRESSABLE ALARMLINE MODULE
94
SMARTONE ADDRESSING & REGISTRATION
• Electronically Addressed (except the APIC, AIM) • SmartOne devices Registered into the control unit
95
SMARTONE ADDRESSING & REGISTRATION •
SmartOne devices are addressed via - Handheld Programmer (except APIC, AIM) - FN-8000-ML Menu Procedure (except APIC, AIM)
•
APIC: addressed via Hex1 and Hex2 switches
•
AIM: addressed via LASERNET or control unit.
•
All SmartOne devices are registered via - FN-8000 Menu Procedure - AutoLearn - Configuration Upload
96
32
PROGRAMMER
97
SMARTONETM HAND-HELD PROGRAMMER •
Compact design & user friendly
•
Convenient means to assign device address information
•
Supports all intelligent SmartOne modules
•
AC and battery power operation.
98
SMARTONETM HAND-HELD PROGRAMMER-FEATURES •
Integral detector base
•
Snap-in AI/AO programming adapter
•
SLC interface connectors
•
AC power adapter
•
4 x AA rechargeable batteries-Internal battery Supervision 99
33
SMARTONETM HAND-HELD PROGRAMMER-FEATURES •
Optional carrying case
•
Status & charging LED‟s
•
Auto power save
•
Contract & Backlight Adjustment
•
specific trouble codes
100
SMARTONETM HAND-HELD PROGRAMMERFEATURES –CONTINUED Integral Detector Fixture: - For use w/photo, ion, and thermal detectors -Eliminates need for SLC wiring -Reduces connection time -Optional automatic alarm test (user configurable) -Approx 15 seconds per device -Sequential device addressing (device range selection)
101
SMARTONETM HAND-HELD PROGRAMMERFEATURES –CONTINUED AI/AO module adapter: -Snaps directly to HHP detector fixture -NO wiring or end-of-line resistors required (except NC AI‟s) Reduces connection time -Optional automatic alarm test (user configurable) -Approx 15 seconds addressing time per device -Sequential device addressing (device range selection) 102
34
SMARTONETM HAND-HELD PROGRAMMERFEATURES –CONTINUED SLC “flying leads” -Plug-in type connector -For use with RRM, ASM, and AAM modules -NO external power or endof-line resistors required to program modules.
103
SMARTONETM HAND-HELD PROGRAMMERFEATURES –CONTINUED Menu Navigation Keys
104
ADDRESSING ASM TO PROGRAMMER
SET FOR AUDIO MODE 4.7K
4.7K
105
35
ADDRESSING RRM TO PROGRAMMER
SLC
REMOTE RELEASE MODULE (RRM) 24VDC
PSU
RELEASE
STATUS
Power NOT needed 106
HSSD INTERFACE MODULE Addressed via • LASERNET or Orion Software • Panel Menu Procedure Registered via • Panel Menu Procedure • AutoLearn • Configuration Upload Cannot be addressed via programmer!
107
QUESTIONS?
108
36
HANDS ON EXERCISE
Assign addresses to SmartOne devices
109
Kidde DAC School
Installation, Assembly & Circuits Review
• INTRODUCTION
• INSTALLATION & ASSEMBLY
• WIRING
• HANDS ON EXERCISE
111
37
CONTENT OF BOX-BASE UNIT •
NEMA 1 enclosure with door
•
1 Power Management Board (PMU)
•
1 Power Supply Unit (PSU)
•
Main Circuit Unit board (MCB) with User interface (UI)
•
Hardware Kit
•
Installation configuration kit – Installation manual – Configuration software manual
•
Installation instructions
•
Enclosure door label
•
Installer‟s wiring diagram
112
• INTRODUCTION
• INSTALLATION & ASSEMBLY
• WIRING
• HANDS ON EXERCISE
113
INSTALLATION & ASSEMBLY SEQUENCE 1. Mount the enclosure per 2-4.1 2. Install PMU per 2-4.4 3. Make AC power connection per 2-4.5 4. Install PSU per 2-4.3 5. Install battery per 2-7.4 and 2-7.5 6. Install expansion Card Cage assembly per 2-7.1 7. Install expansion cards per 2-7.2 8. Install MCB w/UI per 2-4.6 9. Make SLC devices and output devices connections per 2-8.4 and 2-8
114
38
CONFIGURATION SEQUENCE 1. Power the system up and perform the following functions per 4-9: – Enter serial number when prompted – Change installer and owner passwords (4-8.2) 2. Configure the system (chapter 3) 3. Perform initiating and output devices tests (chapter 5).
115
SURFACE MOUNT ENCLOSURE INSTALLATION 3-T Enclosure
2-T Enclosure
5-3/8 5-3/8
14-3/8
14-3/8
116
SEMI-FLUSH MOUNT ENCLOSURE INSTALLATION 3-T Enclosure
2-T Enclosure
0.059 inch Thick Trim Ring Trim Ring Dimensions (LXB) • 3-Tier: • 2-Tier:
17-1/2 x 34-5/8 (in) 17-1/2 x 34-5/8 (in) 117
39
POWER MANAGEMENT UNIT INSTALLATION - PRIMARY AC INPUT •
1 Power Supply Unit – 120VAC 50/60Hz, 3.2 A – 240VAC 50/60Hx, 1.6 A
•
2 Power Supply Unit – 120VAC 50/60Hz, 6.4 A – 240VAC 50/60Hx, 3.2 A
•
Each PMU can interface with 2 PSU‟s for a total of 10.8 A @ 27.6 Vdc.
118
POWER MANAGEMENT UNIT INSTALLATION
119
AC POWER CONNECTION
120
40
POWER SUPPLY UNIT •
One common PS across all panels
•
Each PSU provides 5.4 A
•
Can be expanded to 20 A per enclosure with 4 PSU
121
POWER SUPPLY UNIT INSTALLATION Appearance of Voltage-Selector Slide Switch when set for either 120 VAC or 220/240 V
115 V
230 V
(Slide to required position. Default position is 115 VAC.)
Threaded hole for mounting screw
Fastening tab for mounting screw
122
POWER SUPPLY CONNECTIONS
1 2 3
1 2 3 4 5
= = = = =
4
5
White & black wire White wire Green wire Double black wire Double red wire 123
41
BATTERY CONNECTIONS
124
AUXILIARY POWER INPUT CAPACITANCE
Module
Max. Input Capacitance
Addressable Signal/Sounder Module (ASM)
100 µF
Remote Release Module (RRM)
220 µF
Remote LED Annunciator Module (RLAM)
100 µF
Remote Control Display Module (RDCM)
100 µF
470µF max. capacitance per output 125
STANDBY BATTERY CONNECTIONS
126
42
BATTERY CHARGER • High-rate charger • Charges up to - 165 AH batteries for US applications - 132 AH batteries for Canadian applications • Only charges when required • Disconnect Batteries on Alarm condition
127
EXPANSION CARD CAGE ASSEMBLY To PMU 24 Vdc Earth ground
To MCB Communication Terminal (J9) 24 Vdc outputs
To Next Backplane Com Terminal (J10)
128
MAIN CONTROL BOARD (MCB)
129
43
• INTRODUCTION
• INSTALLATION & ASSEMBLY
• WIRING
• HANDS ON EXERCISE
130
MAIN CONTROL BOARD (MCB) IN-B OUT-A
RS485
IN-A
SLC 1 & SLC 2
To RDCM & LAM
OUT-B IN-
OUT-
IN+
OUT+
J8
SLC 1 or 2
J19 or J20
NORM
ISOL
IN-
OUT-
IN+
OUT+
NORM
ISOL
IN-
OUT-
SLC 1
IN+
OUT+
SLC 2 J20
J19
Relay-Contact Rating
NC
RS232 A or RS232 B
TB3
TBL RELAY NC C NO
RS232 B TB3
J2 PMU COMMS OUT
Main Control Board (MCB)
J10 24 VDC IN
Circuits & COM Ports • 2 SLC • 2 NAC • 2 R-NAC • 4 relays • 2 RS232 ports • 2 USB port • 1 24 VDC output • 1 RS485 port on UI
RS232 A
J8 RELAY 3
NO C
Trouble Relay
USB HOST USB DEVICE
J9 BACKPLANE COMMS OUT
NC
TB2
NO C
RELAY 2
NC
TB1
Programmable Relays
RELAY 1
NO C
3.0 A @ 30 VDC (resistive) 3.0 A @ 120 VAC (resistive)
J17
J18
J16
R-NAC 1 OUT+
IN+ IN-
J15 NAC 1
R-NAC 2 OUT-
ISOL
NORM
OUT+
IN+ IN-
OUT-
ISOL
NORM
J17 or J18
OUT+
IN+ IN-
NAC 2 OUT-
ISOL
NORM
OUT+
IN+ IN-
OUT-
ISOL
To Backplane J10
To optional PMU J12
To PMU J3, J4 or J5
NORM
J15 or J15
R-NAC 1 or 2 OUT+
IN+ IN-
R-NAC 1 or 2
OUT-
OUT+
R-NAC 1 & R-NAC 2
IN+ IN-
OUT-
NAC 1 & NAC 2
131
INTERNAL 24VDC POWER CONNECTIONS
132
44
INTERNAL COMMUNICATION CONNECTIONS Jumper for RS485 bus
133
SIGNALING LINE CIRCUIT - ONBOARD
• 2 SLC loops with 255 devices each • No device type restriction •SLC wiring options – Class A – Class A, style 7 – Class B
• Maximum Resistance per loop = 40 Ω • Maximum Capacitance per loop = 0.5 µF
Note: Class A style 7 is now referred to as Class X by NFPA 134
SIGNALING LINE CIRCUIT-EXPANSION •
1 SLC loops with 255 devices each
•
Up to 6 SLC cards per control unit
• •
No device type restriction SLC wiring options – Class A – Class A, style 7 – Class B
•
Maximum Resistance per loop = 40 Ω
•
Maximum Capacitance per loop = 0.5 µF
Note: Class A style 7 is now referred to as Class X by NFPA 135
45
SLC CLASS A WIRING Class A, Style 6 SLC Wiring
P OUT+
IN+
OUT-
PSD7152
S
CPD7052
THD7252
AI
AO
+
+
ASM
RRM
IN-
Do not use looped wire under terminals of detector bases for Models PSD-7152, CPD7052, and THD-7252. Break SLC wire run to provide supervision of connections.
SLC 1 or 2
J19 or J20
To PMU, To PMU, AUX-1 or 2 - AUX-1 or 2 +
Class A, Style 7 SLC Wiring (Loop Isolators required)
136
SLC CLASS B WIRING
P OUT+
IN+
OUT-
S
PSD7152
CPD7052
THD7252
AI
AO
+
ASM
+
RRM
IN-
SLC 1 or 2
J19 or J20 THD7252
To PMU, To PMU, AUX-1 or 2 - AUX-1 or 2 +
Class B, Style 4 SLC Wiring
137
SLC CLASS A WIRING RESISTANCE Resistance Measurement
Ohmmeter
Capacitance Measurement Procedure • Obtain capacitance per foot of wire information from wire manufacturer • Multiply value by total wiring footage Maximum Resistance per SLC Loop = 40 Ω. Maximum Capacitance per SLC Loop = 0.5 µF 138
46
SLC CLASS B WIRING RESISTANCE Jumper Branch 1
Maximum Resistance per SLC Loop = 40 Ω.
Branch 2
Branch 4
Ohmmeter
Resistance Measurement Procedure
Branch 3
• Short the ends of each branch line one at a time. • Measure the resistance from the terminating points at the control unit to the end of the branch line. • Remove the shorting jumper after each branch-line resistance measurement. 139
SLC CLASS B WIRING CAPACITANCE Capacitance per SLC Loop = 0.5 µF Capacitance Measurement Procedure • Obtain capacitance per foot of wire information from wire manufacturer • Multiply value by total wiring footage
140
NOTIFICATION APPLIANCE CIRCUITS
• Regulated 24 VDC, 28 Vdc max. • Wiring: Class A, Style Z or Class B, Style Y • NAC Current: -2.0 A (max., Non-Synchronized) -1.5A (max., Synchronized) • Voltage Drop: 2.0 V (max.)
24 VDC input * Can be programmed for synchronization.
141
47
NOTIFICATION-APPLIANCE CIRCUITS WIRING Class A, Style Z NAC Wiring
• NAC are power limited • Compatible with conventional, ULListed notification appliances such as: • MT Series Multi-Tone Horns and Horn/Strobes • NS Series Horn/Strobes *
Class B, Style Y NAC Wiring
• NH Series Horns • RSS(P) Series Strobes * • Exceeder Series * • Commander Series * Can be programmed for synchronization.
142
NOTIFICATION APPLIANCE CURRENT Use twisted, unshielded, low-capacitance wire
143
RELEASE NOTIFICATION APPLIANCE CIRCUITS
•NAC configuration supports - one synchronized circuit or - non-synchronized circuit • Release configuration supports - one solenoid per circuit - up to 8 actuators per circuit 144
48
TYPICAL RELEASE NOTIFICATION APPLIANCE CIRCUITS WIRING NORM
ISOL
IN-
OUT-
IN+
OUT+
NORM
ISOL
IN-
SLC 1
OUT-
IN+
OUT+
SLC 2 J20
J19
Relay-Contact Rating
NC
TB2
NO C
RELAY 2
NC
TB1
Programmable Relays
RELAY 1
NO C
3.0 A @ 30 VDC (resistive) 3.0 A @ 120 VAC (resistive)
RS232 A
J8 TB3
NC
RELAY 3
NO C
TBL RELAY NC C NO
RS232 A or RS232 B RS232 B
TB3
Trouble Relay
USB HOST USB DEVICE
S
P
S
Power Limited
P
Main Control Board (MCB)
J10 24 VDC IN
J2 PMU COMMS OUT
Supervised
J9 BACKPLANE COMMS OUT
Legend:
J17
J18 R-NAC 1 OUT+
IN+ IN-
J16
J15 NAC 1
R-NAC 2 OUT-
ISOL
NORM
OUT+
IN+ IN-
OUT-
ISOL
NORM
OUT+
IN+ IN-
NAC 2 ISOL
OUT-
S
J17 or J18
NORM
P
OUT+
IN+ IN-
OUT-
ISOL
To Backplane J10
To optional PMU J12
To PMU J3, J4 or J5
NORM
S
P
Notification-Appliance Circuit Notification-Appliance Circuit
R-NAC 1 or 2 OUT+
P +
End-of-Line Resistor 10 k +/- 5%, 0.5 W
IN+ IN-
OUT-
S
+
Blk
+
R-NAC 1 or 2 OUT+
IN+ IN-
OUT-
+
End-of-Line Resistor 10 k +/- 5%, 0.5 W
Red
J17 or J18
Actuator / Protractor Circuit
S R-NAC 1 or 2
10 ohm Current Limiting Resistor Blk
Actuator / Protractor
End-of-Line Resistor 10 k +/- 5%, 0.5 W
Notification-Appliance Circuit
Solenoid Circuit J17 or J18 (Class B, Style Y) In-Line Releasing Device, P/N 06-220023-001 (Must be close nippled to solenoid enclosure)
Or
+
+
Or
OUT+
IN+ IN-
OUT-
P
(Non-Power-Limited when In-Line Device not used) See General Note 3.
Red
In-Line Releasing Device, P/N 06-220023-001 (Must be close nippled to actuator / protractor)
Or Solenoid Circuit J17 or J18 (Class A, Style Z) R-NAC 1 or 2
S
P
In-Line Releasing Device, P/N 76-800000-004 (Must be close nippled to solenoid enclosure) Blk
Red
OUT+
IN+ IN-
OUT-
End-of-Line Resistor 10 k +/- 5%, 0.5 W
(Non-Power-Limited when In-Line Device not used) See General Note 3.
145
RELEASE APPLIANCE CIRCUITS WIRING FOR SOLENOIDS
146
RELEASE APPLIANCE CIRCUITS WIRING FOR ACTUATORS Release Circuits-Actuators CLASS B, Non-Power-Limited Wiring
Compensation resistor Compensation resistor
In-Line Releasing Device. P/N 06-220023-001 (Must be closed nipped to actuator assembly
Do not intermix different types of actuator in the release circuit. When measuring the total release circuit resistance, use an ohmmeter with 10mA maximum current output. 147
49
REMOTE-RELEASING MODULE WIRING SLC (out) SLC (in)
Be sure to connect module casing to earth ground! SLC
REMOTE RELEASE MODULE (RRM) 24VDC
RELEASE
PSU STATUS
24 VDC (in) 24 VDC (out)
Red
Control Head or Solenoid
Blk
Power Limited
4.7kΩ, 0.5W
In-Line Releasing Device
Auxiliary Power Supply N.O. Trouble Contact
148
REMOTE-RELEASING MODULE WIRING SLC (out) SLC (in)
Be sure to connect module casing to earth ground! SLC
In-Line Releasing Device (RRM) REMOTE RELEASE MODULE 24VDC
RELEASE
PSU STATUS
24 VDC (in) 24 VDC (out)
Red
Blk
Red
Blk
Control Head or Solenoid
Power Limited 4.7kΩ, 0.5W Auxiliary Power Supply N.O. Trouble Contact
Control Head or Solenoid
149
REMOTE-RELEASING MODULE WIRING SLC (out) SLC (in)
SLC
REMOTE RELEASE MODULE(RRM) 24VDC
PSU
RELEASE
STATUS
Compensating Resistor 24 VDC(in) 24 VDC(out)
End-of-Line Resistor 4.7kO, 0.5 W
Supervised and Non -Power - Limited Auxiliary Power Supply N.O. Trouble Contact
Initiator Assemblies (P /N 31- 199932 -004 or P/N 93- 191001 -001)
150
50
RELAY CIRCUITS • 4 Form C Relays - 3 programmable - 1 dedicated trouble (Onboard only) • Contact Ratings - 3.0 A @ 30 Vdc (resistive) - 3.0 A @ 120 Vac (resistive)
Onboard Relays
Expansion Relays card 151
RELAY CIRCUITS NORM
ISOL
IN-
OUT-
IN+
OUT+
NORM
ISOL
SLC 1
IN-
OUT-
IN+
OUT+
SLC 2 J20
J19
Relay-Contact Rating
USB HOST USB DEVICE
RS232 A
J8 TB3
NC
RELAY 3
NO C
RS232 A or RS232 B
TBL RELAY NC C NO
RS232 B
TB3
J9 BACKPLANE COMMS OUT
NC
TB2
NO C
RELAY 2
NC
TB1
Trouble Relay
RELAY 1
Programmable Relays
NO C
3.0 A @ 30 VDC (resistive) 3.0 A @ 120 VAC (resistive)
J10 24 VDC IN
J2 PMU COMMS OUT
Main Control Board (MCB)
J17
J18 R-NAC 1 OUT+
IN+ IN-
J16
J15 NAC 1
R-NAC 2 OUT-
ISOL
NORM
OUT+
IN+ IN-
OUT-
ISOL
NORM
OUT+
IN+ IN-
NAC 2 OUT-
ISOL
NORM
OUT+
IN+ IN-
OUT-
ISOL
To Backplane J10
To optional PMU J12
To PMU J3, J4 or J5
NORM
Relay Output Diagram
152
PRINTER AND COMPUTER CONNECTION
Compatible Printers; drivers already installed for these printers • Okidata Microline 186 (USB printer) • Okidata Microline 320 (Both USB and RS232 printers) • Epson FX-890 (USB printer) 153
51
RDCM/LAM INSTALLATION
Surface Mount
Semi-Flush Mount
154
RDCM/LAM CONNECTIONS
155
PERIPHERAL-DEVICES CURRENT
Use chart to estimate the maximum length of wire that can be connected to RS-485 peripheral 156
52
ADDRESSING LAM Addressing a brand new LAM 1. Connect LAM to main board or RS485 network and power up the system. 2. On Power up LAM goes to addressing Mode by flashing green POWER LED. 3. On pressing the ACK key, first LED turns yellow. The first LED correspond to address 1. LAM address can be selected by pressing the ACK key multiple times. 4. After selecting the required Address, press and hold Signal Silence button for 5 sec to confirm the address
157
ADDRESSING LAM Change LAM Address using local LAM buttons 1. Connect LAM to main board or RS485 network and power up system and LAM 2. Press and hold ACK and SIGNAL SILENCE keys for about 5 seconds to put the LAM into addressing Mode 3. When LAM enters into Addressing Mode; green Power LED will be flashing and first LAM LED turned ON 4. The first LED corresponds to address 1. LAM Address can be selected by pressing ACK button multiple times. 5. After selecting the required Address, press and hold Signal Silence button for 5 sec to confirm the address
158
ADDRESSING RDCM Addressing a brand new RDCM 1.Connect RDCM through UI RS485 network and power up system. 2.On Power up RDCM will be in addressing mode, by displaying “Enter New Module Address (1-15):” 3. Enter the required address (1-15) using RDCM Keypad and press “Enter button
”
159
53
ADDRESSING RDCM Change address of RDCM through local Menu 1. Enter 1,2 and 3 using RDCM key pad to enter Into local menu of RDCM. 2. RDCM displays the following options (1) MODULE ADDRESSING (2) CONTRAST ADJUSTMENTS (3) BACKLIGHT SETTINGS (4) MANUFACTURER SERIAL NUMBER 3. Press 1 to select option “MODULE ADDRESSING” 4. RDCM displays “Enter New Module Address (1-15):” 5. Enter the required address (1-15) using RDCM Keypad and press “Enter button
” to address the RDCM 160
QUESTIONS?
161
• INTRODUCTION
• INSTALLATION & ASSEMBLY
• WIRING
• HANDS ON EXERCISE
162
54
Kidde DAC School
Configuration software
CONFIGURATION
SOFTWARE
CONFIGURATION SOFTWARE •
PC-based program
Displays & Day/Night/ Annunciators Weekend
EOC
Control Board I/O
Network
•
Expandable configuration
•
Event output EOC
•
New enhanced layout
•
Soft keys
•
Compatible operating systems
IIM Display Strings Site & System Settings Addressable Devices (SLC) Expandable I/O Modules
Co nfi gu To rati on ol
– Windows XP – Windows vista – Windows 7
165
55
WINDOWS TOOL BAR ICONS Print File Save File About
Open File New File
Help Verify Configuration Network Node Map
Send Configuration Receive Configuration
Clear Event Log
Online
Receive Event Log
166
PROJECT DEFINITION Tabs
167
„SLC & EXPANSION MODULE‟ TAB
Click on Add to add an expansion module: -
SLC card R-NAC card Relay card PMU City Tie DACT NIC FOCC
168
56
CONFIGURATION
169
IONIZATION SMOKE DETECTOR
Parameters: Latching / Non-Latching General Alarm List Activation Day / Night Alarm Verification PAS Delay Application Selection Pre-Alarm Threshold Alarm Threshold
170
LOCATION ENTRY BOX
40-Character Device Location
171
57
NEW MONITOR-MODULE TYPES
•
Drill Switch
•
Acknowledge Switch
•
Alarm-Silence Switch
•
Reset Switch
172
ABORT STATIONS
•
Underwriters Laboratories (UL)
•
Reset to Full Delay
•
Freeze and Hold
•
Industrial Risk Insurers (IRI)
173
WATERFLOW
Parameters: Non-Latching Input Activate General Alarm Silenceable
174
58
ADDRESSABLE RELAY (AO)
Parameters: Silenceable • General Alarm Output • Drill Activation • Walk-Test Activation • Sequential Deactivation • Fan Restart
175
REMOTE RELEASE MODULE (RRM) Parameters: Device Address
Release Device Release Circuit Activation Time Non-Power Limited Wiring Dual Solenoid Releasing Release Groups Thermal Cycling
176
„DAY/NIGHT/WEEKEND‟ TAB
Day/Night Settings
Night Settings on Weekends Day Start/Stop
177
59
„ON-BOARD‟-OUTPUTS TAB On-Board Outputs Selection List
178
ACCESS-OUTPUTS BOX Enable/Disable Selection
179
NACS Parameters: 40-Char. Circuit Description General Alarm Output Class A/B Wiring Selection Intelligent NAC Code Pattern Silenceable (with Inhibit and Automatic Periods) Walk Test and Drill Activation Thermal Cycling
180
60
RELEASE CIRCUITS Parameters: 40-Char. Circuit Description
Release Activation Device Release Circuit Actuation Period Non-Power Limited Wiring Dual Solenoid Releasing Thermal Cycling
181
R-NAC CIRCUITS Enable/Disable Selection
182
PROGRAMMABLE RELAYS Parameters: 40-Char. Circuit Description General Alarm Output AC Power Loss Activation Pre-Alarm Condition Activation Supervisory Service Activation Trouble Activation
Thermal Cycling
183
61
„DISPLAYS‟ TAB
Main control unit user interface
Remote Display Control Module Add LED Annunciator Module Add Remote Display Control Module
184
„GLOBAL‟ TAB Central Station
Fire Drill NAC Coded Pattern
Global Timers Nightly Test Start General Alarm Outputs Isolation Macros 1 & 2
185
GLOBAL TIMERS
Parameters: AC Failure Delay (0-180 min or 0-12 hours) AO Sequential Deactivation Timer ( 5-15 seconds) Alarm Verification Timer (60-180 seconds) PAS Investigation Timer (0-180 seconds)
186
62
ISOLATION MACROS
ADD Devices or Circuits
Functional Description
DELETE Devices or Circuits
Isolation Command View Box
CLEAR MACRO
187
SELECTIONS FOR MACROS Device/Circuit Selection Window
188
DEVICE RANGE
Range Start Range End
189
63
MODULE CONFIGURATION
ADDING MODULES
Click to add RDCM/LAM
Click to add expansion module
191
ADDING EXPANSION MODULE
Click on Add to add an expansion module: -
SLC card R-NAC card Relay card PMU City Tie DACT NIC FOCC
192
64
ADDING EXPANSION CARD
1. Click on Add
2. Click to add to expansion card e.g. SLC Card
193
EXPANSION CARD ADDRESSES Tow (2) Important Expansion Card Addresses 1. Physical address: • Identifies the physical address identifies the slot in the expansion card cage Numbering begins with the first slot from the left of first expansion car cage. • Up to 24 expansion cards are supported per control unit • The physical address of the last slot on the forth expansion cage is 24 2. Logical address: identifies • The expansion card number for a particular type of expansion module. e.g., SLC 3, R-NAC 3, Relay 1, etc •
194
ADDING SLC CARD
1. Click on Add
2. Click to add to expansion card e.g. SLC Card
195
65
PHYSICAL ADDRESS OF SLC CARD
Physical address
Expansion card cage
1 2 3……6 • Physical address identifies slot in expansion card cage • Numbering begins with first slot from left of first card cage • Up to 6 cards on card cage & 24 expansion cards per control unit •Physical address of the last slot on the forth expansion cage is 24 196
LOGICAL ADDRESS OF SLC CARD
Logical address Type in Owner Location. e.g., Zone 3
Select SLC wiring class option
Click OK to complete SLC card addition • Logical address identifies the SLC loop number • Onboard SLC loops assigned logical addresses 1 & 2 from factory • Expansion SLC card logical address begins from 3 • Up to 8 SLC loops are supported; 2 onboard and 6 expansion cards.
197
ADDING R-NAC CARD
1. Click on Add
2. Click to add to R-NAC Card
198
66
LOGICAL ADDRESS OF R-NAC CARD
Logical address Type in Owner Location. e.g., Zone 3
Click OK to complete R-NAC card addition
• Logical address identifies the R-NAC expansion card number •Expansion R-NAC card logical address begins from 1 with the first R-NAC card added
199
ADDING RELAY CARD
1. Click on Add
2. Click to add to Relay Card
200
PHYSICAL ADDRESS OF RELAY CARD
Physical address
Expansion card cage
1 2 3……6
• Physical address identifies slot in expansion card cage • Numbering begins with first slot from left of first card cage • Up to 6 cards on card cage & 24 expansion cards per control unit •Physical address of the last slot on the forth expansion cage is 24 201
67
LOGICAL ADDRESS OF RELAY CARD
Logical address Type in Owner Location. e.g., Zone 3
Click OK to complete Relay card addition
• Logical address identifies the Relay expansion card number •Expansion Relay card logical address begins from 1 with the first Relay card added
202
ADDING CITY TIE CARD
1. Click on Add
2. Click to add to Relay Card
203
PHYSICAL ADDRESS OF CITY TIE CARD
Physical address
Expansion card cage
1 2 3……6
• Physical address identifies slot in expansion card cage • Numbering begins with first slot from left of first card cage • Up to 6 cards on card cage & 24 expansion cards per control unit •Physical address of the last slot on the forth expansion cage is 24 204
68
CONFIGURING CITY TIE CARD
Type in Owner Location
Select type of reporting
Click OK to complete configuration
205
ADDING CITY TIE CARD
1. Click on Add
2. Click to add to PMU
206
CONFIGURING NEW PMU Check if PMU will Be charging battery
Type in Owner Location Check to supports Auxiliary 1/2 power output as a resettable circuit. Check if 2 PSU will be connected to PMU Click OK to complete configuration
207
69
ADDING RDCM
Corresponds to the beginning or continuation of addition of RDCMs
Click to add RDCM This should correspond with the total number of RDCMs connected to the control unit
208
CONFIGURING RDCM
• Check the Master box to designate this RDCM the master.
209
ADDING RDCM
Corresponds to the beginning or continuation of addition of LAMs
Click to add LAM
This should correspond with the total number of LAMs connected to the control unit
210
70
CONFIGURE LAM
Type in Owner location Check to enable audible notification Check to enable this LAM component with PSU supervision
211
QUESTIONS?
212
HANDS ON EXERCISE
213
71
Kidde DAC School
Event output control (EOC)
EOC TAB
EOC tab
Click on edit to open text editor
215
EOC TEXT EDITOR Toolbar
Menu
216
72
AGENDA • EOC OPERATORS • EOC EXAMPLES • „C‟ IDENTIFIER • „Q‟ VARIABLE • HANDS ON EXERCISE
217
EVENT OUTPUT CONTROL PROGRAMMING Basic Program Structure Inputs = Outputs Input/condition part
Output/Action part
Syntax Ln:k = U Where n= SLC loop number (same as logical address) k = Initiation device address U= Output
Example: L1:1=SG1 If initiating device with address1 on SLC loop 1 is active then turn on SG1. 218
DESIGNATION OF INITIATING DEVICES
•
All initiating devices specified by the loop number followed by colon followed by the device address, e.g., L1:25 (e.g., AI with address 25 on SLC1) L2:1 (e.g., PHOTO detector with address 1 on SLC 2) L3:105 (e.g., AIM with address 105 on SLC 3) L4:213 (e.g., ION detector with address 213 on SLC 4)
219
73
EOC OUTPUT SYNTAX Onboard NAC, R-NAC and Relay circuits, have output syntax that is the same as FN6000: • SG1, SG2, SG3, SG4 for NACs; • AR1, AR2 for Release; and • RY1, RY2, RY3 for Relays.
Expansion NAC Circuits Syntax
SGr:k Circuit number on expansion card Logical address of R-NAC card Example: SG1:1 indicate NAC1 on R-NAC card1
220
EOC OUTPUT SYNTAX Expansion Release Circuits Syntax
ARr:k Circuit number on expansion card Logical address of R-NAC card Example: AR1:2 indicates release circuit 2 on R-NAC expansion card1 Note: R-NAC circuit must be configured as „Release‟; the default is NAC
221
EOC OUTPUT SYNTAX
Expansion Release Circuits Syntax
RYr:k Circuit number on expansion card Logical address of Relay card For example: RY1:1 indicates relay circuit 1 on relay card 1
222
74
ECO “AND” OPERATOR The “AND” Operator
“*” Example: L1:1*L1:2=SG1 If initiating devices with addresses 1 and 2 on SLC loop 1 are active then turn on SG1.
223
EOC “OR” OPERATOR
The “OR” Operator “+” Example: L1:1+L1:2=SG1 If initiating devices with addresses 1 or 2 on SLC loop 1 are active, then turn on SG1.
224
EOC “THRU” OPERATOR The “THRU” Operator “#” Example: (L1:1#10)=SG1 If any initiating devices with addresses 1 thru 10 on SLC loop 1 is active then turn on SG1.
225
75
BRACKET/PARENTHESIS Brackets specify order of operation “(
)”
Examples: 1.) L1:1*L1:10+L1:15#20=SG1 2.) (L1:1*L1:10)+(L1:15#20)=SG1 3.) L1:1*(L1:10+(L1:15#20))=SG1 Brackets define exact meaning
226
COMMA
Activating Multiple outputs “,” Example: L1:1=SG1,RY1,L1:8 Separate all specified outputs by a comma.
227
EOC “DELAY” OPERATOR The “DELAY” Operator “D” Example: D(L1:1,30)=SG1 When device with address 1 on SLC loop 1 activates, wait 30 seconds and then turn on SG1.
228
76
DELAY OPERATOR CHARACTERISTICS
Delay is specified in seconds
Single delays cannot exceed 3600 seconds
Delays longer than 3600 seconds can be achieved buy using identifiers
229
EOC “GREATER THAN” OPERATOR The “GREATER THAN” Operator “(Input)>1” Example: (L1:1#10)>1=SG1 When more than one initiating device is active from addresses 1 thru 10 on SLC loop 1, turn on SG1. NOTE: Works for up to (>9)
230
EOC “ABORT” OPERATOR “D(Input,Delay,Abort)” Example: D(L1:1,30,L1:10)=AR1 During countdown, if abort with address 10 on SLC loop 1 is activated, execute abort per defined abort type. Abort Characteristics
Do not use “+”, or “#‟‟ when specifying multiple aborts. Do not assign aborts to an identifier and then sub in the identifier. 231
77
EOC “I” IDENTIFIER “I” Example: (L1:1#10)=I1 When an initiating device from addresses 1 to 10 on SLC loop 1 actives, set I1 and increment I1 on subsequent device activations.
232
IDENTIFIER CHARACTERISTICS
Identifiers must be defined on the right side of the equation before they can be used on the left side. Identifiers must never appear on the right side of the equation after they appear on the left side. Identifiers should only appear once on the right side of the equation. Up to 255 unique identifiers can be used (I1 –I255)
233
SIGNAL CIRCUIT ACTIVATION SPECIFIER “SG1/60” Example: L1:1+L1:2=SG1/60 L1:1*L1:2=SG1:1/120 When initiating device 1 or 2 on SLC loop 1 activates turn on SG1 @ 60BPM. When initiating device 1 and 2 on SLC loop 1 are active, turn on SG1 on R-NAC card 1 @ 120 BPM
234
78
SIGNAL CIRCUIT ACTIVATION SPECIFIER Technique works for: /60 = 60 Beats per minute /120 = 120 Beats per minute /C = On constant /T = Temporal code three
235
EOC “NOT” OPERATOR “N” Example (Input): L1:1*NL1:2=SG1 When initiating device 1 on SLC loop 1 is active and initiating device 2 on SLC loop 1 is not active then turn on SG1
Example (Output): L1:1+L1:2=SG1 L1:1*L1:2=NSG1 When initiating device 1 or 2 on SLC 1 is active then turn off SG1. When initiating devices 1 and 2 are active then turn off SG1.
236
PRE ALARM ADJUSTMENT
“Input=Set-point=Devices to be changed” Example: (L1:1#50) = 0.9 = P(L1:1#50) When any initiating device from 1 thru 50 on SLC loop 1 activates, then change pre-alarm threshold on devices 1 thru 50 to .9 %/FT on SLC loop 1.
237
79
ALARM ADJUSTMENT
“Input=Set-point=Devices to be changed” Example: P(L1:1#50)=1.3=(L1:1#50) When any initiating device from 1 thru 50 on SLC loop 1 goes into pre alarm, then change alarm threshold on devices 1 thru 50 on SLC loop 1 to 1.3 %/FT
238
EOC “TROUBLE” OPERATOR “T(Input)” Example: T(L1:1)=SG1 When device 1 on SLC loop 1 goes into “trouble” then turn on SG1.
239
EOC “PRE-ALARM” OPERATOR “P(Input)” Example: P(L1:1)=SG1 When initiating device 1 on SLC loop 1 goes into PreAlarm then turn on SG1.
240
80
EOC GENERAL TROUBLE “GT” OPERATOR “GT” Example: GT=SG1 When the panel goes into trouble for any reason then activate SG1. Outputs will de-energize when trouble clears
241
GENERAL SUPERVISORY “GS” OPERATOR “GS” Example: GS=SG1 When the panel goes into supervisory for any reason then activate SG1. Outputs will de-energize when supervisory clears
242
PROGRAM COMMENTS
“$” Example: $ Release sequence, data storage area When a character of a line is “$”, the following characters on the line are ignored.
243
81
GENERAL EOC RULES
128 characters per EOC Line
255 EOC Lines
244
• EOC OPERATORS • EOC EXAMPLES • „C‟ IDENTIFIER • „Q‟ VARIABLE • HANDS ON EXERCISE
245
BASIC SUPPRESSION SYSTEM EXAMPLE Consider the following application. Smoke detectors, abort station and manual releases on SLC loop 1
AR1
SD 1
SD 2
SD 3
SG1
SG1
SD 4
SD 5
ABORT 10
SD 6
Manual Release 11
246
82
BASIC SUPPRESSION SYSTEM Sequence of operation: 1.) Horns activate 60/BPM on first detector alarm 2.) Horns change to 120/BPM on more then one detector, (pre-release) 3.) 30 second delay (Detector activation) 4.) 10 second delay (Manual release activation) 5.) Manual release overrides abort 6.) Horns change to steady on release
247
BASIC SUPPRESSION SYSTEM EOC as follows: 1. (L1:1#6)=SG1/60,I1 2. (I1)>1=SG1/120 3. D((I1)>1,30,L1:10)+D(L1:11,10)=SG1/C,AR1
248
BASIC MAINTENANCE BYPASS EXAMPLE Consider the following application with smoke detector 1 and AI2 on SLC loop 1
SD 1 SG1
SG1
Keyed Maintenance Bypass attached to AI 2
83
BASIC MAINTENANCE BYPASS
L1:1 =Smoke detector on SLC loop 1
L1:2 =AI on SLC loop 1 programmed for supervisory trouble and connected to a keyed switch
SG1 = Output to be bypassed
250
BASIC MAINTENANCE BYPASS Sequence: 1.) If detector activates and maintenance bypass is not on, then active horns 2.) If detector activates and maintenance bypass is on, then do not active horns 3.) If maintenance bypass activates and detector is active, then shut off horns
251
BASIC MAINTENANCE BYPASS EOC Example Line 1.)
L1:1*NL1:2=SG1
Checks the condition of the maintenance bypass before activating SG1. Line 2.)
L1:1*L1:2=NSG1
Is only in the program to account for a condition whereby someone forgets to activate the bypass and turns on the bypass after the output is activated.
252
84
• EOC OPERATORS • EOC EXAMPLES • „C‟ IDENTIFIER • „Q‟ VARIABLE • HANDS ON EXERCISE
253
“C” STATE IDENTIFIER •
The “C” identifier is a state condition which can be set when a defined set of conditions are met within the EOC program
•
Once Set, the “C” identifier will remain set until it is told to de-activate with a not C statement or a panel reset is done
•
The “C” identifier can move from either side of the equals sign as needed.
254
“C” STATE IDENTIFIER
The C Identifier IS
POWERFUL !!! 255
85
EXAMPLES USING THE “C” IDENTIFIER Consider the following application
PALM 20 SD 1
SD 2
SD 4
SD5
SD 3
SLC 1
SG1
SG2 SD 6
SLC 2 PALM 21
256
EXAMPLES USING THE “C” IDENTIFIER Application Sequence of Operation 1. If either ORION is in alarm then SG1 is active 2. If both ORION are not active then turn off SG1 3. If a spot smoke detector activates then SG1 comes on and stays on until reset is pressed.
257
EXAMPLES USING THE “C” IDENTIFIER EOC Program: Line 1.)
L1:20+L1:21=SG1
Line 2.)
NL1:20*NL21=NSG1
Line 3.)
L1:1#6=SG1
258
86
EXAMPLES USING THE “C” IDENTIFIER Correct EOC Program: Line 1.)
L1:20+L1:21=SG1
Line 2.)
(NL1:20*NL21)*NC1=NSG1
Line 3.)
L1:1#6=SG1,C1
259
EXAMPLES USING THE “C” IDENTIFIER Consider the following application: Sprinkler Zone 1 = AR1
Sprinkler Zone 2 = AR2
HD 2
HD 1
Sprinkler Zone 3 = AR3
Sprinkler Zone 4 = AR4
HD 3
HD 4
260
EXAMPLES USING THE “C” IDENTIFIER Pipe and pump limitations require:
If zone 1 is active, Zone 2 can activate but 3 and 4 must be disabled. If zone 2 is active, Zone 1 or 3 can activate but zone 4 must be disabled. If zone 3 is active, Zone 2 or 4 can activate but zone 1 must be disabled. If zone 4 is active, Zone 3 can activate but 1 and 2 must be disabled. No more than 2 zones can ever be active.
261
87
EXAMPLES USING THE “C” IDENTIFIER Example Code: 1.) L1:1*NC3*NC4*NC5=AR1,C1 2.) L1:2*NC4*NC5=AR2,C2 3.) L1:3*NC1*NC5=AR1:1,C3 4.) L1:4*NC1*NC2*NC5=AR1:2,C4 5.) (C1#C4)>1=C5
262
EXAMPLES USING THE “C” IDENTIFIER Consider the following Application: L1:1
= AI connected to a momentary switch
SG1 = SIG circuit
263
EXAMPLES USING THE “C” IDENTIFIER
Application Sequence of Operation:
After the momentary switch is depressed three times, the signal circuit is activated. (Count to Three)
264
88
EXAMPLES USING THE “C” IDENTIFIER Line 1.) L1:1*NC1*NC2*NC3*NC4= C1 Upon activation of device 1 on SLC loop 1 the states of C1,C2,C3, and C4 are checked. If C1 thru C4 are not active, C1 is set. Line 2.) NL1:1*C1=NC1,C2 When device 1 on SCL loop 1 is released the condition of C1 is checked. It will be active so C1 is shut off and C2 is set Line 3.) L1:1*C2=NC2,C3 When device 1 on SLC loop 1 is pressed the second time, the condition of C2 is checked. It will be active so C2 is shut off and C3 is set
265
EXAMPLES USING THE “C” IDENTIFIER Line 4.) NL1:1*C3=NC3,C4 When device 1 on SLC loop 1 is released the second time, the condition off C3 is checked. It will be active, so C4 is set. Line 5.) L1:1*C4=NC4,SG1 When device 1 on SLC loop 1 is pressed for a third time, the condition of C4 is checked. It will be active, so C4 is reset and SG1 is turned on.
266
EXAMPLES USING THE “C” IDENTIFIER Complete EOC 1.) L1:1*NC1*NC2*NC3*NC4= C1 2.) NL1:1*C1=NC1,C2 3.) L1:1*C2=NC2,C3 4.) NL1:1*C3=NC3,C4 5.) L1:1*C4=NC4,SG1
267
89
EXAMPLES USING THE “C” IDENTIFIER Complete EOC 1.) L1:1*NC1*NC2*NC3*NC4= C1 2.) NL1:1*C1=NC1,C2 3.) L1:1*C2=NC2,C3 4.) NL1:1*C3=NC3,C4 5.) L1:1*C4=NC4,SG1
268
• EOC OPERATORS • EOC EXAMPLES • „C‟ IDENTIFIER • „Q‟ VARIABLE • HANDS ON EXERCISE
269
INCREMENTAL VARIABLE “Q” Example: L1:1=I1 I1=Q1 Q1>4=SG1 If initiating device with address 1 on loop 1 is active set I1. Assign incremental value Q1 to I1 and when I1 becomes true more than 4 times activate SG1.
270
90
„Q‟ IDENTIFIER CHARACTERISTICS
•
Identifiers must be defined on the right side of the equation before they can be used on the left side. Identifiers must never appear on the right side of the equation after they appear on the left side. Identifiers should only appear once on the right side of the equation. Once activated and assigned a non-Zero value, can only be reassigned to its initial Zero value by the subsequent execution of another EOC statement that re-initializes it to Zero via the “NOT” Operator or a successful system reset operation.
271
• EOC OPERATORS • EOC EXAMPLES • „C‟ IDENTIFIER • „Q‟ VARIABLE • LAM OUPUT • HANDS ON EXERCISE
272
LAM OUTPUT SYNTAX Syntax for referencing LAM LEDs
LEDr:k LED number LAM Logical address Example: LED1:1 indicates LED number 1 on LAM module 1
273
91
EOC EXAMPLE WITH LAM OUTPUTS L1:1#5=LED1:1,I1 I1>1=SG1,LED1:2,NLED1:1,I2 D(I2,30)=AR1,SG2,LED1:3,NLED1:2 If any of the initiating devices with addresses 1 through 5 on loop 1 is active turn on LED1 on LAM1 and set I1. If more than 1 initiating device is active, activate SG1, turn on LED2 on LAM1 and turn off LED1 on LAM1, assign I2. If I2 is true, delay 30 seconds and activate onboard RNAC circuit 1, activate SG2, turn on LED3 on LAM1 and turn off LED2 on LAM1 274
QUESTIONS?
275
• EOC OPERATORS • EOC EXAMPLES • „C‟ IDENTIFIER • „Q‟ VARIABLE • LAM OUPUT • HANDS ON EXERCISE
276
92
D&C SCHOOL
NETWORKING
NETWORKING •
Up to 64 nodes
•
Remote configuration upload
•
2,040 addresses each node
•
Node-level access protection
•
130,560 across network
•
•
Robust token-passing, peerto-peer protocol
Network-wide access from single point using ICM
Node 1
Node 2
Node 64 278
278
NETWORK CONNECTIVITY W/ CU CABLE
Ch 1
Ch 2
Ch 1
Node 1
Node 2
•
Backplane module
•
Style 4, 6 & 7
•
Ch 1
Ch 2
1 module per node
Ch 2
Node 3 •
Ch 1
Ch 2
Node 64
2-Conductor twisted shielded cable
•
18 AWG, 4,000 ft
279
279
93
NETWORK CONNECTIVITY W/ OPTIC FIBER Ch 1
Ch 2
Ch 1
2c Cu Cables Per Ch.
Node 1
2 F.O.Cables /channel
Node 2
SerialComm module with Fenwal software
•
External module(s) in wall enclosure
•
24VDC from FACP
•
Style 4 – 1 module per node
•
Style 6 & 7 – 2 modules per node • 8.3/125 um SM Cable: 12 miles Mixed Cu-OF network
•
•
Ch 2
Node 64
62.5/125 um MM cable: 1 Mile
280
280
NETWORKING CARD INSTALLATION
Inserting NIC card into Card cage slot
Network Interface Card (NIC)
281
281
FOCM INSTALLATION
282
282
94
NIC RS485 WIRING DIAGRAM – DUAL CHANNEL
NIC Communications Circuits CH1 – CH2 (J12 – J13) Voltage: Current: Recommended Wire: Max. Wire Length:
Per RS-485 Standard (-7.5 to +12.5 Vdc Max) Per RS-485 Standard (250mA Max short circuit) Twisted, shielded, low-capacitance, fire-alarm wire 4,000 Ft. per twisted pair
Connector (FIBER OPTIC) 2 X ST Connectors
283
FOCM WIRING DIAGRAM – DUAL CHANEL
284
284
NETWORKING CONFIGURATION
95
NETWORK CONFIGURATION
Click on Add to add an expansion module: - SLC card - R-NAC card - Relay card - PMU - City Tie - DACT - NIC - FOCM
286
286
ADDING NIC
1. Click on Add
2. Click to add NIC
287
287
PHYSICAL ADDRESS OF NIC
Physical address
Expansion card cage
1 2 3……6 • The physical address identifies the slot in the expansion card cage • Numbering begins with the first slot from the left of first expansion card cage • up to six (6) expansion card can be added to a card cage and 24 expansion cards are supported per control unit; the physical address of the last slot on the forth expansion cage is 24 288
288
96
NETWORK CONFIGURATION OPTIONS
289
289
NETWORK CONFIGURATION OPTIONS Option
Function
Node Number
Reference local node of networked control units. Up to 64 nodes per network.
Channel 1
Check this box if the network messages will be transmitted over communication channel 1 communication. Checking only Channel 1represents a single-channel network communication configuration. Checking both Channel 1 and Channel 2 represents dual-channel network communication configuration.
Channel 2
Check this box if the network messages will be transmitted over communication channel 2. Checking only Channel 2 represents a single-channel network communication configuration. Checking both Channel 1 and Channel 2 represents dual-channel network communication configuration.
Group Number
Reference the autonomous sub-networks or groups that the local node belongs to. There are 65 possible groupings, numbered 0 to 64.
Time Synch Period
Specify how often the system synchronizes the clock with the other panels in the network.
Network Reset Event
Checking this box enables events from this node to be reset from a remote node.
Network Silent Event
Checking this box enables events from this node to be silenced from a remote node.
Log All Network Events
Checking this box enables events on entire network to logged in local node event log
Process Group 0
Checking this box assign a master node privileges to the local node.
Channel 1 Left Fiber
Check this box if incoming network messages through channel 1 will be transmitted over fiber optic cable
Channel 1 Right Fiber
Check this box if outgoing network messages through channel 1 will be transmitted over fiber optic cable
Channel 2 Left Fiber
Check this box if incoming network messages through channel 2 will be transmitted over fiber optic cable
Channel 2 Right Fiber
Check this box if outgoing network messages through channel 2 will be transmitted over fiber optic cable
290
290
NETWORK ACTIVATION
97
NETWORK ACTIVATION
292
292
NETWORKING ACTIVATION
293
293
NETWORK ACTIVATION
294
294
98
NETWORK EOC PROGRAMMING
NETWORK EOC PROGRAMMING EOC Syntax Fx:Ln:k Where x = node number n = SLC loop number k = Initiating device address Example F1:L1:4+F2:L3:5 = SG1 If initiating device with address 4 on SLC 1 of node 1 is active or initiating device with address 5 on SLC3 of node 2 is active then turn SG1 on.
EOC EXAMPLE Write an EOC for the following sequence of operation 1.
If photo detector with address 3 on SLC1 or ION detector with address 4 on SLC 2, both on node 1, in alarm then turn on SG1 at 60bpm
2.
If ASD with address 5 on SLC 3 on node1 is in alarm then turn SG2 on at 60bpm
3.
If alarm on both 1 and 2 above, then turn on SG1/120 and SG2/120.
4.
Delay 15 seconds and if abort with address 30 on SLC1 of node 1 is not pressed, then activate AR1 and turn on SG1/C and SG2/C.
5.
If either devices with addresses 5 and 6 on SLC 1 and 2 respectively of node 2 is in alarm, and either sequence 1 or 2 above is in alarm, then, delay for 15 seconds and activate AR1 on node 1 and turn on SG1/C and SG2/C on node 1.
99
EXAMPLE EOC L1:3+L2:4=SG1/60,I1 L3:5=SG2/60,I2 I1*I2=SG1/120,SG2/120,I3 D(I3,30,L1:2)=AR2, SG1/C,SG2/C (F1:L2:4+F1:L3:5)*(F2:L1:5+F2:L2:6)=C1 D(C1,15)=AR2, SG1/C,SG2/C
298
QUESTIONS
DETECTION
AND
ALARM SCHOOL
DACT, ICM, BACNET
100
DIGITAL ALARM COMMUNICATOR TRANSMITTER (DACT) •
Transmits system status over phone lines
•
SIA and CID formats supported
•
Transmits: – System Status Normal – AC Failure – Low Battery Voltage – Alarm Per Point – System Supervisory – System Trouble – Ground Fault – NAC Trouble – Degraded operation due to microprocessor failure
INTERNET COMMUNICATION MODULE (ICM) •
Provides Internet connectivity
•
Configuration Program download
•
Network-wide access from single node
•
Automatic email notification
•
Event viewing
•
Modbus TCP/IP communication
Distributor Internet
Corporate Loss Prevention
Protected Site
302
MODBUS
Modbus RTU
•
Configured via RS-232
•
Supports all points on 28 MLIC network nodes – 255 points per loop – Up to 2040 points system – Up to 57,120 points per network
•
•
Can support 64 MLIC network nodes with 3 Modbus nodes Supports additional 50 C variable registers
Modbus TCP/IP
• Configured via ICM • Supports all points on 28 MLIC network nodes
255 points per loop Up to 2040 points system Up to 57,120 points per network
• Can support 64 MLIC network nodes with 3 Modbus nodes • Supports additional 50 C variable registers
101
BACNET INTERFACE MODULE (BIM)
•
High performance Building Automation multi-protocol gateway
•
BACnet Testing Lab approved
•
Converts panel Modbus data via rs232 to BACnet objects available to clients on TCP/IP
•
Each module can support up 1250 points
•
Up to 2 BIMs can be added to a control unit
304
DACT EXPANSION CARD INSTALLATION
Inserting DACR card into Card cage slot
Digital Alarm Communicator Module (DACT) 305
DACT EXPANSION CARD WIRING
306
102
ICM EXPANSION CARD INSTALLATION
Inserting ICM card into Card cage slot
Internet Communication Module (ICM) 307
ICM WIRING
308
DACT CONFIGURATION
103
DACT CONFIGURATION
Click on Add to add an expansion module:
-
SLC card R-NAC card Relay card PMU City Tie DACT NIC FOCM ICM
310
ADDING DACT
1. Click on Add
2. Click to add NIC
311
PHYSICAL ADDRESS OF DACT
Physical address Expansion card cage
1 2 3……6 • The physical address identifies the slot in the expansion card cage • Numbering begins with the first slot from the left of first expansion card cage • up to six (6) expansion card can be added to a card cage and 24 expansion cards are supported per control unit; the physical address of the last slot on the forth expansion cage is 24 312
104
DACT CONFIGURATION OPTIONS
313
DACT CONFIGURATION OPTIONS Option
Function
Owner Location
Reference location name for DACT module.
Style
Select either local only communicator or network-wide communicator.
Channel 2 Enabled
By selecting this check box, the DACT module will immediately attempt to dial out on the secondary phone line if the primary phone line fails.
Call is Forwarded
By selecting this check box, the DACT module performs a test on both the Primary and Secondary phone lines at least once every 4 hours.
Blind Dialing
By selecting this check box, the DACT module will dial regardless of whether the it detects a dial tone.
Protocol
Two protocols are available from the drop-down list: • SIA DC-05-1999.09 Ademco Contact ID • SIA DC-03-1990.01(R2003.10)
Primary Phone #
Enter the primary phone number. 20 characters are allowed.
Secondary Phone #
Enter the secondary phone number. 20 characters are allowed.
Account Number 1
10 alphanumeric characters are allowed
Country Code
Select United States, Canada, or India
Periodic Test
24 hours, 12 hours, 4 hours. Use the up/down arrows to set the Periodic Test Start (H:M):time. 314
ICM CONFIGURATION
105
ICM IP ADDRESS •
IP (Internet Protocol) address must be configured before internet communication can be established with panel.
•
Default IP address is 0.0.0.0
•
Two IP addressing options: - Automatic IP address - Manual IP address
AUTOMATIC IP ADDRESS •
The ICM default IP address of 0.0.0.0 automatically enables its Dynamic Host Configuration Protocol (DHCP).
•
If a DHCP server exists in the network to which the ICM is being connected it supplies the ICM with an IP address, gateway address, and sub-net mask when the ICM boots up.
•
If DHCP server does not exist, the ICM responds with a diagnostic error; the red Diagnostic light emitting diode (LED) blinks continuously and the green Status LED blinks five times if no DHCP server is present.
•
If no DHCP exist, pursue manual IP address option
MANUAL IP ADDRESS •
The IP address must be configured manually if no DHCP server exists
•
The recommended way to accomplish this is to connect a laptop or PC to the serial port of the ICM
NOTE: ICM DOES NOT HAVE TO BE POWERED FOR THIS OPERATIONS 318
106
MANUAL IP ADDRESSING PROCEDURE After connecting ICM to computer as demonstrated on previous slide, perform the following to manually assign the ICM an IP address via the serial port 1.
Activate a terminal emulation program such as HyperTerminal with communications settings of 9600 baud, 8 bits, no parity, 1 stop bit, and no flow control.
319
MANUAL IP ADDRESSING PROCEDURE 2.
Cycle the ICM's power off, and then back on, to enter Setup (i.e., Configuration) Mode. A self-test begins after power-up, and the red Diagnostic LED starts blinking after which there is only one second to enter three lower case "x" characters.
Note: The easiest way to enter Setup Mode is to hold down the "x" key at the terminal (or emulation program) while powering up the ICM.
3.
Select 0 (Server Configuration) and follow the prompts to access the IP address.
4. Enter the new IP Address, gateway, and subnet (as needed). Note: When configuring the ICM manually, obtain the appropriate IP Address, gateway address, and sub-masks from the local network administrator..
MANUAL IP ADDRESSING PROCEDURE 5. Select 9 to save the configuration and exit Setup Mode; the ICM performs a power reset upon exiting the Setup Mode. 6. Turn off the ICM/Control Unit power. 7. Remove the RS-232 NullModem Adapter and reconnect the RJ11 modular cord as shown 8. After re-connections are completed, re-apply power to the ICM/Control Unit.
107
THE ICM WEB BROWSER •
The ICM's Web server issues web pages and related files when requested by a Web browser.
•
The ICM includes a default page (index.html) that contains a custom Java applet. The Web browser loads and executes the applet when the Web page is requested.
•
The applet provides a graphical user interface for monitoring the control unit.
322
ICM OPERATION The initial screen that appears when the java applet starts
Click on setup to configure ICM
ICM OPERATIONS
Enter 5 recipients email addresses
Enter addresses Source information (Ref to ICM manual)
When done with entries above, click OK
108
REAL TIME EVENT LOG VIEWING •
Upon the occurrence of an unusual system event, automatic email will be sent and a link provided to the panel‟s event log.
•
Clicking the link starts the java applet
•
Clicking on listings in the opens the listings page shown on the next slide
•
Enter password assigned in the previous slide to open real time event long
REAL TIME EVENT VIEWING
THANK YOU
109