Hp Jetdirect Print Server
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Hp Jetdirect Print Server as PDF for free.
More details
- Words: 695
- Pages: 4
HP Jetdirect Print Server - Using the Embedded Web Server with Jetdirect Firmware x.08.40 Using the embedded Web server HP Jetdirect print servers contain an embedded Web server that can be accessed through a supported Web browser. The embedded Web server provides access to configuration and status pages for the HP Jetdirect print server and the attached peripheral device. NOTE: The firmware on the HP Jetdirect print server must be X.07.03 or newer for the embedded Web server to be available. HP Jetdirect models with firmware versions A.xx.xx do not have an embedded web server. Click here to download HP Download Manager software to upgrade the Jetdirect firmware
Supported Web browsers The following Web browsers are supported: NOTE: Netscape 6.0 is not supported for use with the HP LaserJet 4100 Family printer embedded Web server or the HP Color LaserJet 4550 Family printer embedded Web server. Microsoft Windows 95, 98, NT 4.0, and 2000: •
Netscape Navigator v. 4.01, 4.02, 4.03, 4.05, 4.06, 4.07, and 4.08
•
Microsoft Internet Explorer v. 4.0 with update v SP1, 4.5x, and 5
HP-UX and Sun Solaris: •
Netscape Navigator v. 4.01, 4.02, 4.03, 4.05, 4.06, 4.07, and 4.08
Viewing the embedded Web server Before using the embedded Web server, the HP Jetdirect print server must be configured with a valid IP address. There are many ways to configure an IP address on the print server. For example, the Jetdirect print server will, by default, send Bootstrap Protocol (BOOTP) or Dynamic Host Configuration Protocol (DHCP) requests to be configured by a server. Also, the IP parameters can be configured using the control panel of the printer (for selected printers), Telnet, or HP Web Jetadmin. If the HP Jetdirect print server does not receive a BOOTP or DHCP configuration within a few minutes, it will default to the IP address 192.0.0.192. This address is not necessarily a valid IP address for the network, but it can be used to access the HP Jetdirect print server. However, to use the default IP address, a route must be established from the computer to the Jetdirect by using a route add command. See the help files of the operating system for more details on this command. Once a route or a valid IP address is established, perform the following steps: 1. Open a supported Web browser. 2. Enter the IP address of the print server as the URL.
3. The HP Jetdirect embedded Web page will be displayed. 4. Click Administration. 5. Click the tabs for the pages needed to configure or view the Jetdirect settings. 6. Click the ? icon on the right side of the Web page for additional help. NOTE: Changes to the IP address and other parameters will close the connection to the embedded Web server. To re-establish a connection, use the new IP address. Figure 1: : Status page of the EWS
Several configuration parameters are available through the embedded Web server. Below is an example of the Configuration page: Figure 2: : Configuration Screen of the EWS
Special features
The following HP all-in-one products are supported by the HP Jetdirect 170x, HP Jetdirect 175x, HP Jetdirect 300x, and HP Jetdirect 500x external print servers for scanning (using the embedded Web server) and printing. More functions may be available. Contact the HP all-in-one product or printer support group for details or visit the HP Web site for these products for more assistance. •
The HP Officejet G55, G85, and G95 series: Full product functionality should be available with these products.
•
The HP Officejet R40, R45, R60, R65, and R80 series.
•
The HP Officejet 1150c, 1170c and 1175c Professional series.
•
The HP LaserJet 1100A series.
•
The HP PSC 500. NOTE: The HP LaserJet 3200 and 1200/1220 printers support scanning with the embedded Web server only if connected to an HP Jetdirect 175x print server.
TCP/IP - EWS enhancements The latest HP Jetdirect firmware now supports the ability to disable the Embedded Web Server (EWS). This option is available via telnet and the TFTP configuration file. •
To disable the EWS via telnet/tftp, type: ews-config: 0.
•
To enable the EWS via telnet/tftp, type: ews-config: 1
Supported Web browsers The following Web browsers are supported: NOTE: Netscape 6.0 is not supported for use with the HP LaserJet 4100 Family printer embedded Web server or the HP Color LaserJet 4550 Family printer embedded Web server. Microsoft Windows 95, 98, NT 4.0, and 2000: •
Netscape Navigator v. 4.01, 4.02, 4.03, 4.05, 4.06, 4.07, and 4.08
•
Microsoft Internet Explorer v. 4.0 with update v SP1, 4.5x, and 5
HP-UX and Sun Solaris: •
Netscape Navigator v. 4.01, 4.02, 4.03, 4.05, 4.06, 4.07, and 4.08
Viewing the embedded Web server Before using the embedded Web server, the HP Jetdirect print server must be configured with a valid IP address. There are many ways to configure an IP address on the print server. For example, the Jetdirect print server will, by default, send Bootstrap Protocol (BOOTP) or Dynamic Host Configuration Protocol (DHCP) requests to be configured by a server. Also, the IP parameters can be configured using the control panel of the printer (for selected printers), Telnet, or HP Web Jetadmin. If the HP Jetdirect print server does not receive a BOOTP or DHCP configuration within a few minutes, it will default to the IP address 192.0.0.192. This address is not necessarily a valid IP address for the network, but it can be used to access the HP Jetdirect print server. However, to use the default IP address, a route must be established from the computer to the Jetdirect by using a route add command. See the help files of the operating system for more details on this command. Once a route or a valid IP address is established, perform the following steps: 1. Open a supported Web browser. 2. Enter the IP address of the print server as the URL.
3. The HP Jetdirect embedded Web page will be displayed. 4. Click Administration. 5. Click the tabs for the pages needed to configure or view the Jetdirect settings. 6. Click the ? icon on the right side of the Web page for additional help. NOTE: Changes to the IP address and other parameters will close the connection to the embedded Web server. To re-establish a connection, use the new IP address. Figure 1: : Status page of the EWS
Several configuration parameters are available through the embedded Web server. Below is an example of the Configuration page: Figure 2: : Configuration Screen of the EWS
Special features
The following HP all-in-one products are supported by the HP Jetdirect 170x, HP Jetdirect 175x, HP Jetdirect 300x, and HP Jetdirect 500x external print servers for scanning (using the embedded Web server) and printing. More functions may be available. Contact the HP all-in-one product or printer support group for details or visit the HP Web site for these products for more assistance. •
The HP Officejet G55, G85, and G95 series: Full product functionality should be available with these products.
•
The HP Officejet R40, R45, R60, R65, and R80 series.
•
The HP Officejet 1150c, 1170c and 1175c Professional series.
•
The HP LaserJet 1100A series.
•
The HP PSC 500. NOTE: The HP LaserJet 3200 and 1200/1220 printers support scanning with the embedded Web server only if connected to an HP Jetdirect 175x print server.
TCP/IP - EWS enhancements The latest HP Jetdirect firmware now supports the ability to disable the Embedded Web Server (EWS). This option is available via telnet and the TFTP configuration file. •
To disable the EWS via telnet/tftp, type: ews-config: 0.
•
To enable the EWS via telnet/tftp, type: ews-config: 1
Related Documents
Hp Jetdirect Print Server
November 2019 15
Hp Jetdirect Print Servers
November 2019 24
Hp Blue Print
November 2019 24
Hp Integrity Rx7640 Server
June 2020 10
Print Server Win2k3 - Sap
May 2020 3