How To Setup Tpg Iptv On Vigor2710

How to setup TPG IPTV on Vigor2710 This FAQ will also apply for Vigor2700 [G][V][VG]

Procedure STEP-BY-STEP 1. Open your browser and enter 192.168.1.1 in your address bar 2. Enter the username and password of your router. By default it will be Username: "admin" and Password: (leave as blank) or if you have changed this, please enter the new username and password 3. Click on "Internet Access" on the left side menu then click on "MultiPVCs" 4. Enable Channel 3 5. In the VPI field type in "0" 6. In the VCI field type in "35" 7. Select the QoS Type to "UBR" 8. Select the Protocol to "MPoA" 9. Select the Encapsulation to "1483 Bridged IP LLC" 10.Click "Ok" to save the configuration

11. Select "Port-based Bridge" page 12. Enable Channel 3 13. Tick P2~P4. Enable the port (P2, P3 or P4) only if the PC is going to connect TPG IPTV 14. In Service Type, select "IGMP" 15. Click "OK"

16. 17. 18. 19.

Click on "Applications" on the left side menu then click on "IGMP" Tick the "Enable IGMP Proxy" Tick the "Enable IGMP Snooping" Click "OK" to save the configuration

20. Telnet to the router and enter the following command: ip igmp_snoop txquery on