Gsi Forklift Test[1]

FORKLIFT TEST Revised Date 10/18/08 Name______________________________ Date______________ (Please Print) Score___________________ Circle the best answer. A score of 28 out of 35 (80%) is needed to pass this test. 1. The safety warning or precaution labels on a forklift must be legible. a) True b) False 2. How are

forklifts and cars different? a) Forklifts have rear wheel steering and front wheel drive b) Forklifts have different centers of gravity and balance c) Forklifts and cars are not different d) BothAandB e) None of the above 3. You must understand the controls, instrumentation and operating instructions for the specific forklift you will be operating. a)

True b) False 4. Before starting a forklift, you must: a) Ensure that the transmission is in neutral and that the parking brake is engaged b) Check the fuel lines and fittings on liquefied petroleum type forklifts c) Have your foot on the brake pedal when starting the engine d) All of the above e) None

of the above 5. A forklift load capacity of 5,000 pounds at 24 inches means: a) That a 5,000 pound load can only be lifted 24 inches above the ground b) That a 5,000 pound load can be lifted as high as you want c) That a 5,000 pound load can be lifted as high as

you want, as long as the center of gravity for the load is within 24 inches of the mast d) That a 5,000 pound load can be lifted as high as you want, as long as the center of gravity for the load is farther than 24 inches from the mast

FORKLIFT TEST Revised Date 10/18/08 6. Why must a forklift operator always check the nameplate of the forklift they are operating? a) They must know the lifting capacity of the forklift b) If they do not, they may pick up a load that is to heavy, causing the forklift to tip c) They must check

to see if the rated capacity has changed because of the addition of attachments d) All of the above e) None of the above 7. What is the purpose of a pre-operational inspection? a) To ensure you will be operating an unsafe vehicle b) To ensure you will be operating a safe vehicle 8.

What List six things you should look for during your pre-operational check of your vehicle. (each answer worth one (1) point) a) ______________________________ b) ______________________________ c) ______________________________ d) ______________________________ e) ______________________________ f) ______________________________ 9. When loading or unloading highway trucks with a forklift, what must be done? a) The truck must have its rear wheels chocked

b) The truck does not have to have its rear wheels chocked c) The truck brakes must be set d) The truck brakes must not be set e) BothAandC 10. Do not operate the starter continuously for more than: a) 10 seconds b) 20 seconds c) 15 seconds d) 30 seconds 11. How can

a forklift be used as a man lift? a) Have the person to be raised stand on the forks b) Place a pallet on the forks and then have the person stand on it c) Only when a manufacturer approved attachment with appropriate safety devices is used. d) You can never use the forklift as a man lifter

under any circumstances

FORKLIFT TEST Revised Date 10/18/08 12. When operating the forklift you must watch out for what types of surface conditions? a) Uneven floors b) Rough surfaces c) Wet or oily surfaces d) All of the above 13. Forklifts equipped with attachments will be operated as partially loaded forklifts when not handling a load.

a) True b) False 14. The forks should be spaced as far apart as possible to aid in keeping the load stable. a) True b) False 15. You must always be aware of how much headroom or overhead clearance is available when operating a forklift. a) True b) False 16. The forklift

always has the right of way over pedestrians and other equipment. a) True b) False 17. Forklifts should not be driven up to anyone standing in front of a bench or other fixed object. a) True b) False 18. Forklift operators are required to driven with the load on the uphill side. a) True

b) False 19. Fire aisles and access to stairways may not be blocked. a) True b) False 20. If a forklift does not have a seat with a seatbelt for a passenger, no riders are allowed. a) True b) False

FORKLIFT TEST Revised Date 10/18/08 21. Dock boards (bridge plates) must be properly secured before they are driven over. a) True b) False 22. Speed must be increased when negotiating turns. a) True b) False 23. A forklift operator should drive in reverse if vision is obstructed by the load. a)

True b) False 24. A forklifts wheelbase, track and height, the load�s weight distribution and the forklifts counterweight location all contribute to the vehicles stability. a) True b) False 25. When a forklifts load center falls within the stability triangle, the vehicle is stable and will not tip over. a) True b) False

26. Forklifts with leaking fuel systems may be used. a) True b) False 27. The forks must not be placed under the load as far as possible. a) True b) False 28. When lifting a load never lift the load higher than needed to clear any obstacles. a) True b) False

29. A safe distance must be maintained from the edges of ramps or platforms. a) True b) False 30. Forklifts may be used to opening or closing doors. a) True b) False