Teltonika WiMAX Camera Teltonika WiMAX Camera encompasses a large number of environmental monitoring applications. WiMAX technology provides wide coverage in remote areas allowing transmitting high resolution video or single images wirelessly. The inherent support of Quality of Service (QoS) mechanisms allows differentiating bandwidth for time sensitive traffic to ensure required image quality. Wireless Teltonika camera saves installation time as no wired cable installation is required on the clients’ premises. The camera setup is done via a web browser. With the configured settings it may work automatically without host PC. The images can be acquired automatically with programmable period and/or upon external triggers such as motion sensors or door contacts. The video and single images can be viewed on a PC or a hand held device, and can also be transmitted to FTP-server and/or by e-mail. Simple installation and remote management allows user deploying the device easily on any operators WiMAX network. OMA-DM reduces the need for on-site installation services, saving time for support and maintenance. By remotely monitoring RSSI of each user, the shadow areas with low RSSI can be determined (QoS is proportional to RSSI). This relieves operators from heavy maintenance efforts without need to visit direct region. Teltonika WiMAX Camera Highlights § IEEE 802.16e Standard Compliant (Mobile WiMAX) (2.3/2.5/3.5 GHz) § OMA-DM supports remote firmware upgrade and management § Video and/or single snapshot images § JPEG/MPEG-4/H.264 compression § Image/Video recording to microCD memory card § Pre-alarm function (transmit/record video before sensor activity) § Built-in Web server for monitoring via standard browser § Firmware upgrade via Web-based GUI.
CAMERA FUNCTIONS
Status indication § Signal strength
§ Image sensor: 3 Megapixel CMOS, resolution QXGA
§ Connection status
(2048x1536)
§ Mains or battery power supply status
§ Lens: C/CS mount Time synchronization
§ Digital zoom function
§ Manual Supported resolutions
§ Via PC
§ QXGA (2048x1536)
§ NTP time-server
§ WUXGA (1920x1200) Management
§ UXGA (1600x1200) § XGA (1024x768)
§ Save/load camera configuration file
§ VGA (640x480)
§ Firmware update
§ QVGA (320x240) Power
§ QQVGA (160x120)
§ 12 V DC Supported image/video compression format
§ Internal backup battery
§ H.264 Other
§ MPEG-4 § JPEG
§ Software to watch multiple cameras at once (on request) § Control of external equipment (relay contacts)
Images stored/recorded in WiMAX SPECIFICATIONS
§ MicroSD card inserted in camera (max card size 16 GByte) § FTP server § E-mail
§ Standard Compliance: IEEE 802.16e-2005 Mobile WiMAX § Modulation: Scalable OFDMA Wave 2 Compliant; QPSK,
Image/video transmitting/recording
16QAM, 64QAM (DL)
§ At programmable time period
§ Duplexing Mode: TDD
§ On motion detection
§ Max Data Rate: Up to 20Mbps (DL), 5Mbps (UL);
§ On sensor activity (e.g. PIR sensor, door contact, etc)
§ Frequency bands: 2.3GHz, 2.5GHz and 3.5GHz § Channel Bandwidth: 3.5Mhz, 5MHz, 7MHz, 10MHz, 20MHz
Video review
§ RF Output Power: Max. 23dBm
§ Via camera's WEB-interface
§ FFT: 512/1024/2048 points FFT
§ E-mail (single images, videoclips)
§ Authentication: EAP-TLS, EAP-TTLS, PKMv2
§ Videostreaming
§ Encryption: AES, DES, 3DES § WiMAX QoS: UGS, rt-VR, ert-VR, nrt-VR, BE
Please note: The product specifications may change without prior notice.
HQ JSC Teltonika
Teltonika International GmbH
Teltonika International Oy
Saltoniskiu st. 10c
Rosenstraße 2
Kutomotie 18 B
LT-08105, Vilnius
10178 Berlin
00380 Helsinki
Lithuania
Germany
Finland
Tel +370 5 212 74 72 (Lithuania)
Tel +49 30 243102 205
Tel +358-9-565 96220
+49 30 243102 206
Fax +358-9-565 96300
Tel +370 5 265 73 60 (International Calls Landline) Tel +370 5 265 73 61 (Landline)
Fax +49 30 243102 22
Email
[email protected]
Fax +370 5 276 13 80
Email
[email protected]
Web www.teltonika.com
Email
[email protected]
Web www.teltonika.de
Web www.teltonika.lt