Encoded (1).pdf

JORGE BURGUETE PRECIADO Controls and Automation Engineer

Personal Information Name: Jorge Burguete Preciado Date: September 4, 1989 Address: Col. Palmira Cuernavaca, Morelos. Linkedin: linkedin.com/in/jorge-burguete

Age: 29 Years E-mail: [email protected] Mobile phone: (777) 1334511 ID Profesional: 8955029

Stract Control and Automation Engineer with 4 years of experience in the automotive industry, automation and control projects for assembly and production lines. Advanced knowledge in programming PLC, HMI, Industrial Networks, integration of pneumatic equipment, MIG welding controllers, Spot, vision systems, torques, robots, digital and analog I / O modules.

Education 2008- 2013

Bachelor’s Degree

Universidad La Salle Cuernavaca Engineer in Mechatronics.

Professional Experience Autotek Magna International (Emiliano Zapata, Morelos) Controls and Automation Engineer December 2016 - current • Responsible for automated equipment, welding cells, automated welding stations, conveyors, gantry systems, lift assist automated and control systems etc. • Provide support for troubleshooting and avoid downtime, tracking failures from PLC. • Configuration and parameterization of Cognex and keyence vision systems, SEW servo drives, PowerFlex frequency inverters, Atlas Copco torque systems, safety devices, programmable safety controllers, safety relays, I / O modules, analog modules, etc. • Continuous improvement in the logic of programming, and development of HMI, migrations of obsolete equipment to new technologies. • Development of automation projects. • Participation and support in engineering changes in the process. • Configuration of Industrial Ethernet / IP, Devicenet, IOLink, Asi, Profibus and Profinet networks. • Configuration of Managed Switch, Access Point and clients. (Scalance, Stratix, MOXA) • Configuration and mapping of welding controllers. • Systems management with OPC Server, development of ANDON systems, MES, PLC sequencing, etc. • Participation, contribution and implementation of improvement ideas, to reduce quality defects, scrap reduction and plant savings. • Configuration Robot Fanuc ARCmate 120ic. • Programing of security controllers, Safety Industrial Level (SIL3 and SIL4).

Projects: • Project implementation, for the reduction of missing cord, short cords and excessive welding, in manual and robotic welding processes. • Automation of the rework process in punching. • Migration of Devicenet welding cells to Ethernet / IP, SLC to CompactLogix. • Automated poka-yokes integration in the production lines. • Project implementation for reduction of inverted and overlapped nuts in resistance welding. • Project ANDON and MES (Manufacturing Execution System) production data are sent by OPC server to a database to be shown on the internal page of the company. • Partitioning of a production line controlled by a PLC Control Logix 1756-L73s to two PLCs 1756-L73s, the logic between the two PLCs was balanced, the devicenet network was partitioned, and ethernet/IP, obtaining greater performance in the control equipment. Schneider Electric Proyecto Audi (San José Chiapa, Puebla) Specialist in Controls and Automation December 2015 - December 2016 •

• • • •

Responsible for the control and automation of Scada Systems Monitoring, BMS systems as well as continuous improvement of said systems, optimizing the energy expenditure, having under control, the flow of the main energies (hot water, cold water, ice water, HVAC, compressed air and electric power). Optimize your process and improve response times. Automation and improvement of monitoring systems. Fault Correction. Monitoring of systems such as chillers, compressors, heat exchangers and boilers.

TEG Total Engineering Group (Puebla, Puebla) Controls Engineer March 2015- December 2015 • Engineering Development for welding cells or Body in White production lines. • Development of electrical and control diagrams in EPLAN. • Process automation. • Programming of programmable logic controllers (PLC's) Siemens or Allen Bradley. • Integration and configuration of pneumatic equipment, IO modules, welding robot, manipulators, etc. • Development and programming of HMI. • Design and development of Devicenet and Ethernet / IP networks, Profibus, Profinet. • Control panel engineer. • Management of ISA Standard, interpretation of process diagrams and instrumentation. • Controllers Management, CompactLogix, ControlLogix, Guard Logix, S7 1200/1500/300. • Configuration of safety devices Sick and Pilz. • Programing of security controllers. Projects:

Electrical design of tools, Control cabinets, High,

Honda FIT/HR-V (Silao, Guanajuato

medium and low voltage cabinets, Start-up, PLC

NISSAN (Puebla, Puebla)

and HMI programming, Support for Production Jorge Burguete Preciado Página 2

LuK Schaeffler (Puebla, Puebla) Trainee in Manufacturing Engineering in the area of Assembly and Production. March 2014-February 2015

Skills: Allen Bradley • RSLogix 5000, RsLogix 500, Studio 5000 • FactoryTalk View • RSLinx y RSNetWorx SIEMENS • Step 7 • TIA Portal • WinCC Flexible Programming languages PLC: Ladder, Structure Text (ST) Function Blocks (FBD). • Java, C#, C++. • Develop Android Application for Industry IIOT. Industrial Networks •

•

Devicenet, Ethernet/IP, Profibus,Profinet, ASI, Serial y Modbus.

Schneider Electric • SmartStructure (BMS)

Control Tools • EPLAN • Vision System Cognex In Sight (Spreadsheet), Dataman, Keyence IV. • Atlas Copco torque tool. • Servo drives (Sew), Frequency Inverter (Altivar PowerFlex), Soft Starter (SMC Flex, Altistar). • Managed Industrial Switches, NAT, Routers, Access Point. • Knowledge and development in network topologies. • Controller Weld Medar, Lincon, Bosch. • IO Modules Balluff, Murr, Turck, Pepperl and Fuchs. • DSC Robot Fanuc. • Conveyors, Gantrys, Lift Assist. • Safety Modules, Pilz, Sick, Keyence, Turck (curtains, scanners Safety y safety relays). • Develop System Scada.

Trainings: • • • • • • • •

•

Training of Servodrive SEW Move Drive B. In-Sight EasyBuilder and Spreadsheets Standard (IACET License). Training in vision systems Keyence Model IV. Training in configuration of administrable Switches and design of industrial networks. Training in configuration and diagnosis of IOLink Turck modules. Training in Programming PLC HMI Siemens Tia Portal. Training in Programming PLC Rslogix 500. Training in flow meters, level meters, pH analytics and conductivity, electromagnetic meters, KROHNE brand. SmartStruxure Building Operation, Workstation and System Design certification. SmartStruxure certification Bacnet with b3 devices.

Languages Ingles Intermediate Spanish Native

Jorge Burguete Preciado Página 3