Electrical Design,sathish.gk

G.K.Sathish Kumar #394,19th Cross, 4th Maim Road, Ramesh Nagar, Bangalore- 37 [email protected], [email protected]

+91-9894795986

CARRIER OBJECTIVES:

SUMMARY OF QUALIFICATIONS

To dedicate myself to the professional of electrical and electronics engineering where I can my skills and knowledge impractically and giving the best of mine to the concern and also develop my self.

Two years continuing experience in Finite Element Analysis (FEA), including static/dynamic, Electromagnet, thermal and modal analysis Several years experience with ANSYS classic, ANSYS workbench and beginning stage of Maxwell2D,3D ,Rmxpart Strong background in Design and Analysis of Motor Designing and FEA Analysis Very strong education in Design and Analysis of Power Electronics and Drives Having knowledge in FEA Analysis of Semiconductor Device and Electromagnet Knowledge about Circuit Design and Analysis Having experience in production & QC engineer Creative ability to analyze technical and logical problems

I. Working as an Associate IT Consultant (FEA Analyser) in ITC InfoTech, Bangalore from 30.06.08 to till date. For Leading oil and gas industry client

PROFESSIONAL EXPERIENCE

Web Site: www.itcinfotech.com 1. Project: Research and development of mechatrinics system for subsea oil Industry and FEA analysis of both mechanical and electrical parts Company: Smith oil group Nic, USA. Web Site: http://www.smithoilgroup.com Responsible:Static FEA Analysis of electrical and mechanical system To implement remote sensing system electronic device Develop of required control system Selection of electronic device and of motor Designing of drives circuit And preparing of technical document and power point Presentation 2. Project: Static FEA Analysis Seadrill Rig and Mechanical Equipment and Preparing Technical Document Company: Aker Solution, Norway Web Site: www.akersolutions.com Responsible: Developed A Static FEA Analysis Seadrill Rig and Mechanic Equipment and Preparing Of Technical Document, Power Point Presentation

II. Worked as Lecturer P.V Polytechnic Tindivanam. (From Jan 2006 to Jul 2006) Subject handling:-1.Electrical machines 2.power electronics III. Worked in Ajanta India Limited at Mobi, Gujarath. Production & QC engineer (contract basis) From Nov 2003 to Dec 2005 Responsible: - Monitoring daily production as per requirement Maintaining the production record Maintaining delivery and order record Manage worker and time to time production Quality check Maintaining QC record ME – Power Electronics and Drive 68% [2006-2008] (Anna University) Mailam Engg. College, Mailam – 604 304 Case study: - CAD of Electrical Apparatus, Modelling And Analysis Of Electrical Machines(FEA), Advanced Semiconductor Drives, AC & DC Drives, Digital Signal Processor, Analysis Of Inverter &Converter Diploma in Industrial Safety Engineering Annamalai University Annamalai Nagar. EDUCATIONAL QUALIFICATION

BE - Electrical and Electronics Engineering 60% [2000-2003](University of Madras) St.Joseph’s College of Engineering, Jeppiar Nagar Chennai – 600 119 Diploma In Electrical and Electronics Engineering 87.8% [1997-2000](DOTE) Adhiparasakthi Polytechnic, Melmaruvathur –603 301 S.S.L.C 71.83% [1996-1997] National Higher Secondary School Tindivanam

Post graduate: Title:-Thermal Characterization of high Speed Switched Reluctance Motor with soft

Composite Material ACADEMIC PROJECTS

Description: - This project investigates the application potential of soft magnetic composite material (SOMALOY 500) in high-speed switched reluctance motor (SRM). Two configurations (1) all sheet metal with smooth frame and ribbed frame (2) all Soft magnetic composite material with smooth frame and ribbed frame have been studied using finite element analysis(FEA) to obtain their nodal temperature distributions in different parts with two different stator frames such as stator with smooth frame and stator with ribbed frame. The study reveals that the all soft magnetic composite configuration with ribbed stator frame has a better thermal capability a desirable feature in high speed Aerospace applications.

Undergraduate: Title:-Design and Analysis of Multi Level Inverter for Single Phase Induction Motor. Description: - The main objective of this project is to design and analysis of the multi level inverter for industrial motor. which is allow them to reach high voltage with low harmonic without the use of transformer as the number of voltage level increasing the harmonic content of out put voltage waveform decreases significantly Diploma: Title:-Play Stop and Play Reversal. Control of Three phases Induction Motor. Description The main objective of this project the induction motor using for building lift. Which is controlled by Plug stop and plug reversal control switch

LANGUAGE

C, C++.

SIMULATION TOOL

MATLAB/Simulink, ANSOFT(Simplorer)

FEM SOFTWARE

ANSYS classic & ANSYS workbench [E- Mag, Thermal, Structural]

MICROSOFT OFFICE And OPENOFFICE

word Document , Excel Power point

TECHNICALSKILLS

IEEE & INTERNATIONAL CONFERENCE

1. "Torque-to-Weight Ratio Improvement with Soft Magnetic Composite Material in High Speed Switched Reluctance Motor" IEEE TENCON 2008, Hyderabad, November 19-21. India 2. "Two Dimensional Magnetic and Thermal Analysis of High Speed Switched Reluctance Motor Using Soft Magnetic Composite Material” IEEE TENCON 2008, Hyderabad, November 19-21 .India 3. “Improved torque characteristics of switched Reluctance motor with staggered rotor pole” ICEE2009 Pondicherry Engineering College, Pondicherry, India 4. “A new method for reducing magnetic radial force in switched reluctance motor” ICEE-2009 Pondicherry Engineering College, Pondicherry, India 5. “Mechanical charactersion of high speed switched reluctance motor using soft composite Material” INCACE’09 Kongu Engineering College Tamilnadu India (selected) 1. "Magnetic and Thermal Analysis of High Speed Switched Reluctance Motor with Soft

NATIONAL CONFERENCE

Magnetic Martial" ETPES'0818th April 2008. Sethu Institute of Technology Kariapatti 626106, Madurai, India 2. "High Speed Switched Reluctance Motor Using Magnetic Composite Material For Aerospace Application" PEDECS 2008. Annamalai University, Annamalaainagar 608002. India 3. “Thermal and vibration analysis of high-speed switched reluctance motor with soft composite material” Rajalashmi Engineering College Chennai India

WORKSHOP & TRAINING

SKILL RESPONSIBILITIES:

1. National Work Shop on Power Electronic (NWPE – 2006) Indian Institute of Technology - Kanpur, U.P, India] 2. Recent Trend in Wind Power Generation and FACTS National Institute of Technology, Tiruchirapalli – 620 015 3. Training programme for Engineers of Future (PEF-G) L&T Switch Gear Training Centre, Connor] 4. Short Term Training Program Emerging Trends in Embedded and Wireless Technology. Mailam Engineering Collage, Mailam - 604 304

Ability to Lead a Team and Ability to Arrange Work Schedule to Effect Early and Timely Completion of Projects And Works

Father’s Name

G.Kaliyavarathan,

Permanente Address

#31 Umapathy Street,

N.K. Na-gar, Tindi-vanam, Villupuram Dist, Tamil nadu-604002, India. PERSONAL PROFILE

DECLARATION:

Place: Bangalore Date:

Date of Birth

08-11-1979

Gender

Male

Nationality

Indian

Language known

Tamil and English

Passport No.

B2520709

Pan No

BZCPS9020C

Current CTC

3 Lac / A

Notice period

1 Month

I hereby declare that all the above statement mentioned is correct to the best of my Knowledge and belie

Yours Faithfully, G.K.SathishKumar