Draping With A Split Using Msc Laminate Modeler

WORKSHOP 7 DRAPING WITH A SPLIT

PAT325, Workshop 7, July 2009 Copyright 2008 MSC.Software Corporation

WS7-1

● Problem Description ● This workshop introduces the concept of creating a split, or cut, in a ply to reduce the shearing that it might undergo while being draped on a mould. ● First, the geometry is created and meshed by running a session file. ● Lamina/plies are created in MSC.Laminate Modeler for two material property sets. The materials are of type scissor or slide. ● Because the surfaces are highly curved a split is introduced in one of the plies. This shows how to do this important procedure. It is important because any surface, no matter how complex its shape, can be draped if splits are introduced in the draping material/fabric. ● Software Version ● Patran 2008 r2 for MD Nastran ● Files Required ● Drapewithsplit.ses ● Materials.ses PAT325, Workshop 7, July 2009 Copyright 2008 MSC.Software Corporation

WS7-2

SUGGESTED EXERCISE STEPS 1. 2.

3. 4. 5. 6. 7.

Create a new database. Import geometry and mesh by playing the session file drapewithsplit.ses Create material properties by playing the session file materials.ses Create a new layup file Create MSC.Laminate Modeler materials Create MSC.Laminate Modeler plies Modify first ply to create split

PAT325, Workshop 7, July 2009 Copyright 2008 MSC.Software Corporation

WS7-3

PAT325, Workshop 7, July 2009 Copyright 2008 MSC.Software Corporation

Video Quality Optimized for Viewing at 100% WS7-4