Donnie Darko Mask.pdf
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Donnie Darko Mask.pdf as PDF for free.
More details
- Words: 920
- Pages: 17
DONNIE DARKO MASK Materials list - Printing device - Paper sheets for printing / A4 or US Letter paper - Thick paper or thin cardboard. 160-300g. - Spray mount or Glue stick to glue the paper patterns on your cardboard if you use method A - Scissors and a craft knife. - Adhesive tape. (transparent) - Thick needle and ruler to scold the folds
- (Optional!) Wood Glue and a small brush if you prefer to use the glue flaps.
Printing - The templates should not be scaled. In your printer settings do not select to fit the paper. The patterns fit to A4 paper (210 mm x 297 mm) or US Letter paper (8½" X 11").
PAGE 1/17
A How to print and fold thick paper/ numbers hidden The numbers will be inside of your mask
(1) Print out your patterns on thin paper. (Do not scale the pattern) (2) Glue your patterns on the backside of your cardboard you would like to use. We recommend Spray Glue or a glue stick. Dont use glue that wets the paper too much. Your printed pattern lines will be on the inside of your final mask. (3) Cut out the patterns along the solid
cutting lines for each piece. The dashed lines are the folding lines so make sure not to cut them. (If you want to use adhesive tape you can cut away the glue flaps) (4) Score the outward and inward folding lines with a thick needle or a stencil pen, then crease and fold along the lines. The dashed lines are either valley or mountain folds. Make sure to fold the patterns in the right direction.
IMPORTANT
Mountain fold line
Valley fold line
Cut line
Glue flap
PAGE 2/17
B How to print and fold thin paper/ numbers visible The numbers will be outside of your mask
(1) Print out your patterns on your final paper.(Do not scale the pattern) (2) Cut out the patterns along the solid cutting lines for each piece. The dashed lines are the folding lines so make sure not to cut them. (If you want to use adhesive tape you can cut away the glue flaps)
(4) Score the outward and inward folding lines with a thick needle or a stencil pen, then crease and fold along the lines. The dashed lines are either valley or mountain folds. Make sure to fold the patterns in the right direction.
IMPORTANT
Mountain fold line
Valley fold line
Cut line
Glue flap
PAGE 3/17
How to assemble Assembly (5) Find the matching numbers and glue the corresponding sides together. We recommend two options.
(6) After completing the mask we recommend to glue the headband together on the final page. Tape it to the inside to get an optimal fit of the mask. (7) Let your creativity flow. You can decorate and color your mask anyway you like.
Option 1 / Easy Adhesive tape Use adhesive tape to fix the corresponding sides from the outside. pro: easy and fast contra: tape is visible from the outside
Have fun we woulD lovE to See yOur CreatioNs.
Option 2 / Advanced Glue We recommend wood glue express to glue the flaps together. Just use a thin layer otherwise the paper gets too soggy. Use a small brush to apply the glue on the flap. After drying the woodglue gets invisible. You can also use a glue stick but the connection is not very durable.
taG youR phoTos wIth tHe haShtag #AwesoMepatTerns And sHare Them With Us. yoU havE queStions?
pro: invisible contra: time consuming Glue all parts together to complete the model.
PAGE 4/17
ConTact uS [email protected]
If you printed this pattern 1:1 the line should be 100mm
100mm
gluE flapS 50
53
59
48 43
46
PAGE 5/17
51 52
4
glue TogetheR 4
58
61
57
PAGE 6/17
3
2
1
glue TogetheR
1
62
55
54
PAGE 7/17
2
3 52
51
PAGE 8/17
27
63 19
26
26
24
25
glue TogetheR
20
21
41
21
22
17
20 23
PAGE 9/17
60
34
34
32
27
19
31
33
glue TogetheR
29
28
35
29
31
18 30
PAGE 10/17
glue TogetheR 53
59
56
56
38
44
36
40
55
58
57
54
61
62 63
60
PAGE 11/17
50
49 39
38
glue TogetheR
39
37
37
36
35
33
30
32
PAGE 12/17
43 44
47 45
glue TogetheR
45
42
40
42
41
24
25
23
PAGE 13/17
46
48
49
47
PAGE 14/17
8 18
7 6
5 12
11
10
9
28
13
22
14 16
15
17
PAGE 15/17
8
7 5
6
9
Teeth 10
11
12
13 14 16 15
PAGE 16/17
The head band The Head Band is an additional fix to make sure that the mask fits you well. Follow the instructions below and glue it to the inside of the mask. (1) Cut 3 Stripes out of A4/US letter paper.
(3) Cut out two more stripes and glue them to the sides of the ring (see drawing below).
(2) Glue the stripes together with tape and wrap the band around your head. Make sure the band fits well. Then glue it together so you have a closed ring.
(4) Place the head band inside of the mask and fix it to the mask.
A4 papeR / us leTter papeR
30mm 30mm 30mm
30mm Glue to the inside of the mask
60mm
Tape together
Tape together
60mm
Tape together
Tape together
PAGE 17/17
- (Optional!) Wood Glue and a small brush if you prefer to use the glue flaps.
Printing - The templates should not be scaled. In your printer settings do not select to fit the paper. The patterns fit to A4 paper (210 mm x 297 mm) or US Letter paper (8½" X 11").
PAGE 1/17
A How to print and fold thick paper/ numbers hidden The numbers will be inside of your mask
(1) Print out your patterns on thin paper. (Do not scale the pattern) (2) Glue your patterns on the backside of your cardboard you would like to use. We recommend Spray Glue or a glue stick. Dont use glue that wets the paper too much. Your printed pattern lines will be on the inside of your final mask. (3) Cut out the patterns along the solid
cutting lines for each piece. The dashed lines are the folding lines so make sure not to cut them. (If you want to use adhesive tape you can cut away the glue flaps) (4) Score the outward and inward folding lines with a thick needle or a stencil pen, then crease and fold along the lines. The dashed lines are either valley or mountain folds. Make sure to fold the patterns in the right direction.
IMPORTANT
Mountain fold line
Valley fold line
Cut line
Glue flap
PAGE 2/17
B How to print and fold thin paper/ numbers visible The numbers will be outside of your mask
(1) Print out your patterns on your final paper.(Do not scale the pattern) (2) Cut out the patterns along the solid cutting lines for each piece. The dashed lines are the folding lines so make sure not to cut them. (If you want to use adhesive tape you can cut away the glue flaps)
(4) Score the outward and inward folding lines with a thick needle or a stencil pen, then crease and fold along the lines. The dashed lines are either valley or mountain folds. Make sure to fold the patterns in the right direction.
IMPORTANT
Mountain fold line
Valley fold line
Cut line
Glue flap
PAGE 3/17
How to assemble Assembly (5) Find the matching numbers and glue the corresponding sides together. We recommend two options.
(6) After completing the mask we recommend to glue the headband together on the final page. Tape it to the inside to get an optimal fit of the mask. (7) Let your creativity flow. You can decorate and color your mask anyway you like.
Option 1 / Easy Adhesive tape Use adhesive tape to fix the corresponding sides from the outside. pro: easy and fast contra: tape is visible from the outside
Have fun we woulD lovE to See yOur CreatioNs.
Option 2 / Advanced Glue We recommend wood glue express to glue the flaps together. Just use a thin layer otherwise the paper gets too soggy. Use a small brush to apply the glue on the flap. After drying the woodglue gets invisible. You can also use a glue stick but the connection is not very durable.
taG youR phoTos wIth tHe haShtag #AwesoMepatTerns And sHare Them With Us. yoU havE queStions?
pro: invisible contra: time consuming Glue all parts together to complete the model.
PAGE 4/17
ConTact uS [email protected]
If you printed this pattern 1:1 the line should be 100mm
100mm
gluE flapS 50
53
59
48 43
46
PAGE 5/17
51 52
4
glue TogetheR 4
58
61
57
PAGE 6/17
3
2
1
glue TogetheR
1
62
55
54
PAGE 7/17
2
3 52
51
PAGE 8/17
27
63 19
26
26
24
25
glue TogetheR
20
21
41
21
22
17
20 23
PAGE 9/17
60
34
34
32
27
19
31
33
glue TogetheR
29
28
35
29
31
18 30
PAGE 10/17
glue TogetheR 53
59
56
56
38
44
36
40
55
58
57
54
61
62 63
60
PAGE 11/17
50
49 39
38
glue TogetheR
39
37
37
36
35
33
30
32
PAGE 12/17
43 44
47 45
glue TogetheR
45
42
40
42
41
24
25
23
PAGE 13/17
46
48
49
47
PAGE 14/17
8 18
7 6
5 12
11
10
9
28
13
22
14 16
15
17
PAGE 15/17
8
7 5
6
9
Teeth 10
11
12
13 14 16 15
PAGE 16/17
The head band The Head Band is an additional fix to make sure that the mask fits you well. Follow the instructions below and glue it to the inside of the mask. (1) Cut 3 Stripes out of A4/US letter paper.
(3) Cut out two more stripes and glue them to the sides of the ring (see drawing below).
(2) Glue the stripes together with tape and wrap the band around your head. Make sure the band fits well. Then glue it together so you have a closed ring.
(4) Place the head band inside of the mask and fix it to the mask.
A4 papeR / us leTter papeR
30mm 30mm 30mm
30mm Glue to the inside of the mask
60mm
Tape together
Tape together
60mm
Tape together
Tape together
PAGE 17/17
Related Documents
Donnie Darko
July 2020 15
Donnie Darko Things
November 2019 14
Donnie Darko Ensayo
October 2019 17
Donnie Darko Mask.pdf
October 2019 18
I - Media Studies - Case Study - Donnie Darko
June 2020 10
More Documents from "Riccardo Nakamoto Maganza"
Geometria-trigonometria-conamat.pdf
October 2019 28
Donnie Darko Mask.pdf
October 2019 18
Enjambre Falacia-tabs Drum.docx
October 2019 17
Entrevista Laboral.docx
November 2019 0