Command.docx

Command Command: _box Specify first corner or [Center]: Specify other corner or [Cube/Length]: l Specify length <300.0000>: 320 Specify width <25.0000>: 25 Specify height or [2Point] <-25.0000>: 150 Command: _cylinder Specify center point of base or [3P/2P/Ttr/Elliptical]: Specify base radius or [Diameter] <20.0000>: 20 Specify height or [2Point/Axis endpoint] <-150.0000>: 25 Command: 3DROTATE Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0 Select objects: 1 found Select objects: Specify base point: ** ROTATE ** Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: Regenerating model. Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Copy cylinder to top of the box

Command: SUBTRACT Select solids, surfaces, and regions to subtract from .. Select objects: 1 found Select objects: Select solids, surfaces, and regions to subtract .. Select objects: 1 found Select objects: 1 found, 2 total Select objects: 1 found, 3 total Select objects: 1 found, 4 total Select objects: 1 found, 5 total Select objects: 1 found, 6 total Select objects: 1 found, 7 total Select objects: 1 found, 8 total Select objects: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Enter

Command: _cylinder Specify center point of base or [3P/2P/Ttr/Elliptical]: Specify base radius or [Diameter] <40.0000>: Specify height or [2Point/Axis endpoint] <-25.0000>: 100 Cantumkan cylinder dengan box

Cantumkan lagi di bahagian belakang box

Cantumkan screw bersama dengan cylinder dan box

Command: ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Wi ndow/Object] : a Regenerating model.

Lukisan Ortografik Pergi ke halaman Layout 1 Select object : all Command : delete <enter> Command: SOLVIEW Enter an option [Ucs/Ortho/Auxiliary/Section]: U Enter an option [Named/World/?/Current] : C Enter view scale <1>: 1 Specify view center: Specify view center <specify viewport>: Specify first corner of viewport: Specify opposite corner of viewport: Enter view name: PELAN Enter an option [Ucs/Ortho/Auxiliary/Section]: O Specify side of viewport to project: Specify view center: Specify view center <specify viewport>: Enter view name: HADAPAN Enter an option [Ucs/Ortho/Auxiliary/Section]: O Specify side of viewport to project: Specify view center: Specify first corner of viewport: Specify opposite corner of viewport: Enter view name: SISI Command: soldraw Select viewports to draw.. Select objects: Specify opposite corner: 3 found Select objects: 21 solids selected.

Lukis Isometrik Command: mview Specify corner of viewport or [ON/OFF/Fit/Shadeplot/Lock/Object/Polygonal/ Restore/LAyer/2/3/4] : Specify opposite corner: Regenerating model. Melabelkan lukisan ortografik Command: mtext Labelkan semua lukisan ortografik dan satu lukisan isometric.

Command: layer