Colors For Eyer Tutorial
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Colors For Eyer Tutorial as PDF for free.
More details
- Words: 459
- Pages: 11
User Guide
Colors for EYER Tutorial
Colors for EYER Tutorial 1. Step by step tutorial 1. Open EYER, load eye-parts from Eyes Library. 2. Set Render Name. 3. Choose which eye do you wish to create Left, Right or Both.
2 3
2
4. Select Plugins -> Colors from main menu. 4
5. Select the items which color and opacity you want to change.
5
3
Colors for EYER Tutorial 6. Adjust values of colors and opacity functions.
7
6
7. To restore standard parameters select Reset button. 8. Set Render Name. 9
8
9. Select OK button.
4
10. Open Poser with installed DAZ Victoria3.
11. Load Victoria3 from Poser Figures library.
11
5
Colors for EYER Tutorial 12. This model is loaded without skin texture, so you need to first add skin texture to Victoria3 figure.
12
13. Open Poses library Zew Eyer.
13
6
14. Load MAT file generated by EYER, usualy named myEye (V3 figure must be selected).
14
7
Colors for EYER Tutorial 15. Now Victoria is ready for posing and render.
8
User Guide
Tips for Colors
Tips for Colors Caution: the Preview is available for facilitation purposes and may insignificantly differ from the rendered texture map, especially when texture is semi-transparent and functions' parameters are set on extremes.
Tip 1 If you want to change colours of laces and meshes from black to white and vice versa, remember that half-transparent textures are the hardest to show in preview and that additional to do this change you will need to set functions to extremes so the preview can be a bit different from rendering result. For better result set Contrast to minimum and then set Brightness to appropriate value (to minimum if you change from white to black, and to maximum if you change from black to white).
Tip 2 To change colours of black and white items you will need Brightness and RGB functions. Remember that increasing RGB can cost you the change of shadow colour. Decreasing values of RGB do not change shadows. To change the colour of the white items decrease value of some of RGB functions and after that set appropriate for you brightness. There are two ways to change the colour of the black items. First: increase Brightness and after that decrease values of some of RGB functions. Second: increase values of some of RGB functions. In second case you need to be careful because this method can change the colour of shadows.
10
Tip 3 To copying functions' values between items select the first item from which you want to copy. Right click on it and select Copy then select the second item to which you want to past right click on it and select Paste.
11
Colors for EYER Tutorial
Colors for EYER Tutorial 1. Step by step tutorial 1. Open EYER, load eye-parts from Eyes Library. 2. Set Render Name. 3. Choose which eye do you wish to create Left, Right or Both.
2 3
2
4. Select Plugins -> Colors from main menu. 4
5. Select the items which color and opacity you want to change.
5
3
Colors for EYER Tutorial 6. Adjust values of colors and opacity functions.
7
6
7. To restore standard parameters select Reset button. 8. Set Render Name. 9
8
9. Select OK button.
4
10. Open Poser with installed DAZ Victoria3.
11. Load Victoria3 from Poser Figures library.
11
5
Colors for EYER Tutorial 12. This model is loaded without skin texture, so you need to first add skin texture to Victoria3 figure.
12
13. Open Poses library Zew Eyer.
13
6
14. Load MAT file generated by EYER, usualy named myEye (V3 figure must be selected).
14
7
Colors for EYER Tutorial 15. Now Victoria is ready for posing and render.
8
User Guide
Tips for Colors
Tips for Colors Caution: the Preview is available for facilitation purposes and may insignificantly differ from the rendered texture map, especially when texture is semi-transparent and functions' parameters are set on extremes.
Tip 1 If you want to change colours of laces and meshes from black to white and vice versa, remember that half-transparent textures are the hardest to show in preview and that additional to do this change you will need to set functions to extremes so the preview can be a bit different from rendering result. For better result set Contrast to minimum and then set Brightness to appropriate value (to minimum if you change from white to black, and to maximum if you change from black to white).
Tip 2 To change colours of black and white items you will need Brightness and RGB functions. Remember that increasing RGB can cost you the change of shadow colour. Decreasing values of RGB do not change shadows. To change the colour of the white items decrease value of some of RGB functions and after that set appropriate for you brightness. There are two ways to change the colour of the black items. First: increase Brightness and after that decrease values of some of RGB functions. Second: increase values of some of RGB functions. In second case you need to be careful because this method can change the colour of shadows.
10
Tip 3 To copying functions' values between items select the first item from which you want to copy. Right click on it and select Copy then select the second item to which you want to past right click on it and select Paste.
11
Related Documents
Colors For Eyer Tutorial
April 2020 8
Shine For Eyer Tutorial
April 2020 3
Bump For Eyer Tutorial
April 2020 7
Colors For Clothim Tutorial
April 2020 4
Colors For Clother Tutorial
November 2019 9