Class1_1_88

Resolving network issues Related topics “Enable ethernet port for onboard NIC” on page 112 “Resolve duplicate IP addresses” on page 112

9.4.1 Enable ethernet port for onboard NIC Use this procedure to enable the onboard NIC. Skip this procedure if onboard NICs are currently enabled. CAUTION BIOS setup is an advanced tool. Enter the system setup only if you are an experienced user.

1. Restart the computer and, when prompted during system startup, press the appropriate key(s) to enter system setup. 2. Select Integrated Devices. 3. If Network Interface Controller is listed, you have onboard NIC. Change the setting to On. 4. Save changes and exit BIOS settings to continue the system startup.

9.4.2 Resolve duplicate IP addresses Use this procedure to resolve duplicate IP addresses for FTE node. 1. Perform the following: Operating system Tasks Windows 2007 1. Click Start > Control Panel. The Control Panel window is displayed. 2. Click Network and Internet > Network and sharing Center > Change Adapter Settings. Windows Server 2008 1. Click Start > Control Panel. The Control Panel window is displayed. 2. Click Network and sharing Center > Manage Network Connections. Windows Server 2012

The Network Connections window is displayed. 2. Right-click the Honeywell FTE Adapter, and then choose Properties. The Honeywell