3/26/2019
Piyush's Blog: Cisco MDS Series Swich Zoning
Piyush's Blog About me
EMC Isilon
XtremIO
VMAX
Scripting
CISCO
Brocade
NetApp
Miscellaneous
FRIDAY, MARCH 13, 2015
Cisco MDS Series Swich Zoning Fundamentally below flow chart should be followed for zoning:
Before we begin zoning please make sure you have cabled each HBA to both switches assuring the host is connected to each switch. Now let’s get started … Configuring and Enabling Ports with Cisco Device Manager: Once your HBAs are connected we must first Enable and Configure the ports. 1. Open Cisco Device Manager to enable port:
2. Type in the IP address, username and password of the first switch:
3. Right-click the port you attached FC cable to and select enable:
Cisco allows the usage of multiple VSANs (Virtual Storage Area Network). If you have created a VSAN other than VSAN 1 you must configure the port for the VSAN you created.
storageteknologi.blogspot.com/2015/03/cisco-mds-series-zoning.html
1/5
3/26/2019
Piyush's Blog: Cisco MDS Series Swich Zoning
1. To do this, right-click the port you enabled and select “Configure”:
2. When the following screen appears, click on Port VSAN and select your VSAN, then click “Apply”:
3. Save your configuration by clicking on “Admin” and selecting “Save Configuration”, once the “Save Configuration” screen pops up and requests you to select “Yes”:
Click "Yes"
Once you have enabled and configured the ports, we can now zone your Hosts HBAs to the SAN. Login to Cisco Fabric Manager: 1. Let’s begin by opening Cisco Fabric Manager:
storageteknologi.blogspot.com/2015/03/cisco-mds-series-zoning.html
2/5
3/26/2019
Piyush's Blog: Cisco MDS Series Swich Zoning
2. Enter FM server username and password (EMC Default admin; password) , then clock “Login”:
3. Highlight the switch you intend to zone and select “Open”:
4. Expand the switch and right-click “VSAN”, then select “Edit Local Full Zone Database”:
Creating An FC Alias: In order to properly manage your zones and HBAs, it is important to create an “FC Alias” for the WWN of each HBA. The following screen will appear: 1. When it does, right-click “FC-Aliases” and select “Insert”, once selected the next screen will appear. Type in the name of the host and HBA ID, example: SQL_HBAO. Click the down and then select the WWN that corresponds to your server, finally click “OK”:
storageteknologi.blogspot.com/2015/03/cisco-mds-series-zoning.html
3/5
3/26/2019
Piyush's Blog: Cisco MDS Series Swich Zoning
Creating Zones: Now that we have created FC-Aliases, we can now move forward creating zones. Zones are what isolates connectivity among HBAs and targets. Let’s begin creating zones by: 1. Right-clicking on “Zones”. 2. Select “Insert” from the drop down menu. A new screen will appear. 3. Type in the name of the “Zone”, for management purposes use the following format _ Example: SQL01_HBAO_VNX_SPAO. 4. Click “OK”:
Note: These steps must be repeated to zone the hosts HBA to the second storage controller. In our case, VNX_SPB1. Adding Members to Zones: Once the Zones names are created, insert the aliases into the Zones: 5. Right-click on the Zone you created. 6. Select “Insert”, and a new screen will appear. 7. Select “FC-Alias”, click on “…” box then select Host FC Alias. 8. Select the target FC Alias, click “OK”, and click “Add”:
Also Read cisco-mds-fabric-switch-command-line Happy Learning! Posted by piyush chawla at 10:27 AM Labels: CISCO MDS, Zoning
No comments: Post a Comment
storageteknologi.blogspot.com/2015/03/cisco-mds-series-zoning.html
4/5
3/26/2019
Piyush's Blog: Cisco MDS Series Swich Zoning
Enter your comment...
Comment as:
Publish
Google Accoun
Preview
Newer Post
Home
Older
Subscribe to: Post Comments (Atom)
Picture Window theme. Powered by Blogger.
storageteknologi.blogspot.com/2015/03/cisco-mds-series-zoning.html
5/5