Calibration Cycle Ecc 6

Integration Test Plan

Module - Plant Maintenance Maintenance Cycle

Test Scenario

No

BUSINESS PROCESS STEPS

1 Create Characterisitic Temeperature

2 Create Master Inspection Characteristic

TRANS. CODE

CT04

QS21

INPUT DATA

Patch/ Reference

OUTPUT DATA / RESULT

SAP Doc Reference/

Name: Temperature. Description: Temperature in Deg C. Status:released. Data Type:Numeric format No. of characters:6 Decimal Places:2 Unit of measure: Deg C. Value Assignment: Single Value.

DATA ACCEPTED ,.

Maintenanc e plan category MM created.

Name: TEMP; Description: Temperature in deg C Control data: Quantitative characteristic is selected; Status:released; Model: Reference Characteristic; Control indicators selected: Sampling procedure,Summery recording, Defects recording,Optional character,Fixed scope

DATA ACCEPTED

Master inspection Characteris tics :VOLTS created.

OK / Error (support by Screen Shots)

OK

OK

Comments : Tested By K.Kiran Kumar

Test Date 12/02/2007

Approved By

Approved Date

Integration Test Plan Test Scenario

No

BUSINESS PROCESS STEPS

Module - Plant Maintenance Maintenance Cycle TRANS. CODE

INPUT DATA

Patch/ Reference

OUTPUT DATA / RESULT

SAP Doc Reference/

OK / Error (support by Screen Shots)

,no.documentation,reco rd measured values, No formula. 3 Create Measuring instrument

IE01

4 Create Measuring point

IK01

6

Create General Maintenance task list

IA05

Name: MUMT-250; Category:Q; Description: temperature controller. Maint.plant:1000; Workcenter:ELE-MNT; company code:1000; costcenter:101010; task list usage: Maintenance(004); Business Area: Measuring point Object: Equipment (IEQ); Equipment: MUMT-250 Measuring point category: M(meas.general); charecteristic:TEMPERA TURE. Decimal Places:2 Unit of Measure: Deg C Group:21 usage:Plantmaintenanc e(4); status:released(4); strategy: ; inspection type:300

DATA ACCEPTED

OK

DATA ACCEPTED

DATA ACCEPTED

Measuring point: 46 created.

Tsaklist with Group:21 and groupcount er:1

OK

OK

Comments : Tested By K.Kiran Kumar

Test Date 12/02/2007

Approved By

Approved Date

Integration Test Plan Test Scenario

No

BUSINESS PROCESS STEPS

Module - Plant Maintenance Maintenance Cycle TRANS. CODE

INPUT DATA

Patch/ Reference

OUTPUT DATA / RESULT

SAP Doc Reference/

OK / Error (support by Screen Shots)

created. 7

Create Inspection Method

QS 31

Name:TEQUP Description:Inspection Method for Test equipment. Staust: Being Created. Plant :1000 Select Attach document Select document type:

Data Not accepted.

Comments : Tested By K.Kiran Kumar

Test Date 12/02/2007

Approved By

Approved Date