Biological Safety Cabinets

Biological Safety cabinets Biological Safety Cabinets are partly-recirculating laminar airflow enclosures with high efficiency particulate air (HEPA) filtration of exhaust air and an air barrier at the work opening. HEPA-filtered vertical laminar airflow which is recirculated in the work zone creates an ultra-clean work environment for product protection. An air barrier between the operator and the work zone is maintained by a flow of room air into a full width grille in the work opening. The barrier air mixes with the laminar flow air in a sump underneath the work surface, and is exhausted to the outside environment via a HEPA filter and an optional virus burn-out. All positive pressure zones and filter seals are surrounded by negative pressure zones, so as to contain potentially hazardous aerosols.

HEPA FILTER

Media Glass fiber paper - imported

Particle retention

0.3 micron

Efficiency

99.97 %

Pressure drop

23 mm WG

Size - at supply

48" x 24" x 6" 1 Number

Size - at Exhaust

12" x12" x 6" 1 Number

PRE FILTER

Media Non woven - synthetic polyester

Particle retention

10 - 15 micron

Efficiency

90 %

Pressure drop

6 mm WG

Size

800 x 400 x 60 mm

Blower Assembly

By 1/3 HP, single phase, 1440 RPM motor, directly coupled with a pair of aluminum, centrifugal impeller. Capacity 1000 CFM, Pressure 30 mm WG

Exhaust Assembly

By ¼ HP, Single phase, 1440 RPM motor, directly coupled with a aluminum impeller. Capacity - 300 CFM, Ducting by PVC pipe with rain guard - DIA - 150 mm

Ultra violet lamp

3 feet, 30 Watt - 1 No

Illumination

4 feet, 40 Watt - with diffusers

Standard accessories

Pressure manometer, Additional power point, Gas inlet nozzle, floor leveling screws, wire chord

Power supply

240 V, single phase, 50 Hz