Basic Vs Crystal Syntax
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Basic Vs Crystal Syntax as PDF for free.
More details
- Words: 4,189
- Pages: 19
Crystal Reports Comparison of Crystal and Basic Formula Syntax
Overview Crystal Reports version 8 and higher offers two different syntaxes for writing formulas: the Crystal syntax and the Basic syntax. This paper describes some of the differences between the two syntaxes and provides general information on the control structures that are available for the syntaxes.
Contents INTRODUCTION ............................................................................................ 3 FORMULA COMMENTS ................................................................................. 3 Crystal syntax .................................................................................................... 3 Basic syntax....................................................................................................... 3
THE RESULT OF A FORMULA........................................................................ 4 Formula Variable ........................................................................................4 Crystal syntax .................................................................................................... 4 Basic syntax....................................................................................................... 4
Output of the Formula .................................................................................4 Crystal syntax .................................................................................................... 4 Basic syntax....................................................................................................... 4
ASSIGNMENT OPERATOR ............................................................................. 5 Crystal syntax .................................................................................................... 5 Basic syntax....................................................................................................... 5
STATEMENTS .............................................................................................. 5 Separating Statements..................................................................................5 Crystal syntax .................................................................................................... 5 Basic syntax....................................................................................................... 5
Continuing Statements .................................................................................6 Crystal syntax .................................................................................................... 6 Basic syntax....................................................................................................... 6
USING DATE, TIME, OR DATETIME VALUES .................................................. 6 Crystal syntax .................................................................................................... 6 Basic syntax....................................................................................................... 7
EXTRACTING ELEMENTS FROM A STRING ..................................................... 7 Crystal syntax .................................................................................................... 7 Basic syntax....................................................................................................... 7
ARRAYS ..................................................................................................... 7
12/28/2004 12:12 PM
Copyright © 2004 Business Objects. All rights reserved.
Page 1
Crystal Reports
Crystal versus Basic Formula syntax
Declaring an Array......................................................................................8 Crystal syntax .................................................................................................... 8 Basic syntax....................................................................................................... 8
Referencing Elements within an Array ........................................................8 Crystal syntax .................................................................................................... 8 Basic syntax....................................................................................................... 8
Assigning values to an array........................................................................8 Crystal syntax .................................................................................................... 8 Basic syntax....................................................................................................... 8
VARIABLES ................................................................................................. 8 Variable Scopes ...........................................................................................9 Crystal syntax .................................................................................................... 9 Basic syntax....................................................................................................... 9
Variable Types ...........................................................................................10 Crystal syntax .................................................................................................. 10 Basic syntax..................................................................................................... 10
Variable Names..........................................................................................11 Declaring Multiple Variables in One Statement ........................................11 Crystal syntax .................................................................................................. 11 Basic syntax..................................................................................................... 11
IF-THEN-ELSE CONTROL STRUCTURES ...................................................... 11 Else If versus ElseIf....................................................................................12 Crystal syntax .................................................................................................. 12 Basic syntax..................................................................................................... 12
Single-Line IF Statements ..........................................................................12 Crystal syntax .................................................................................................. 12 Basic syntax..................................................................................................... 13
Multi-Line IF Statements ...........................................................................13 Crystal syntax .................................................................................................. 13 Basic syntax..................................................................................................... 13
SELECT OR CASE STATEMENTS ................................................................. 14 Crystal syntax .................................................................................................. 14 Basic syntax..................................................................................................... 14
LOOPING .................................................................................................. 14 For/Next Loops ..........................................................................................15 Crystal syntax .................................................................................................. 15 Basic syntax..................................................................................................... 15
Exiting a For/Next loop .............................................................................16 Crystal syntax .................................................................................................. 16 Basic syntax..................................................................................................... 16
Do Loops....................................................................................................16 Do … While..................................................................................................... 17 Crystal syntax only .......................................................................................... 17 Do While … Loop and Do Until … Loop ....................................................... 17 Basic syntax only............................................................................................. 17 Do … Loop While and Do … Loop Until ....................................................... 18 Basic syntax only............................................................................................. 18
While Loops ...............................................................................................18 Crystal syntax .................................................................................................. 19 Basic syntax..................................................................................................... 19
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 2
Crystal Reports
Crystal versus Basic Formula syntax
Introduction Most formulas in Crystal Reports can be written in either Crystal or Basic syntax. However, Record Selection and Group Selection formulas must be written in Crystal syntax. Crystal syntax is similar to formula writing in C++ while Basic syntax is similar to formula writing in Microsoft Visual Basic.
Formula Comments Formula comments are notes included with a formula to explain its design and operation. Comments do not print and they do not affect the formula; they appear only in the Formula Workshop. Use comments to explain the purpose of a formula or explain the steps involved in writing it. Crystal syntax uses two forward slashes (//) to denote a comment. Comments can begin on a new line or on the same line as the rest of the code. Comments begin with Rem or an apostrophe (‘). A comment beginning with Rem is a separate statement and must begin on a new line or must be separated from the rest of the line by a colon. A comment beginning with an apostrophe can begin on the same line as the rest of the code without needing to be separated by a colon.
Crystal syntax // This is a comment in Crystal syntax "Hello World" "Hello World" // This is a comment in Crystal syntax
Basic syntax Rem This is a comment in Basic syntax formula = "Hello World" : Rem This is a comment in Basic _ syntax ' This is a comment in Basic syntax formula = "Hello World" ' This is a comment in Basic syntax
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 3
Crystal Reports
Crystal versus Basic Formula syntax
The Result of a Formula There are two main differences between Crystal and Basic syntax when returning the result of a formula: •
Basic syntax uses a special variable called formula whereas Crystal syntax does not.
•
Basic syntax returns the value assigned to the formula variable whereas Crystal syntax returns the last line within the formula.
Formula Variable Basic syntax requires a special variable called formula to return the value of the formula whereas Crystal syntax does not.
Crystal syntax // This formula will output "Hello World" "Hello World"
Basic syntax ' This formula will output "Hello World" Formula = "Hello World"
Output of the Formula Crystal syntax returns the last line within the formula while Basic syntax returns the value after the special variable called “formula”. This means that in Basic syntax there can be other statements below the variable but the formula will not output these values.
Crystal syntax // This formula will output the number 5 Numbervar x; "Hello World"; x :=5
Basic syntax ' This formula will output "Hello World" Dim x as number Formula = “Hello World” x = 5
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 4
Crystal Reports
Crystal versus Basic Formula syntax
Assignment Operator The assignment operator is the colon equal sign (:=) in Crystal syntax as opposed to the equal sign (=) in Basic syntax.
Crystal syntax Numbervar x; x := 5; // Notice the colon equal sign versus the equal // sign x;
Basic syntax dim x as number x = 5 ' Notice the equal sign versus the colon equal sign formula = x
Statements All formulas exist as a sequence of statements. For a formula to evaluate correctly, these statements must be separated and continued correctly.
Separating Statements In Crystal syntax a semicolon must separate each statement (;). In Basic syntax, either a new line or a colon must separate statements (:).
Crystal syntax // A semicolon separates the statements Numbervar ID; if {Customer.Last Year's Sales} > 10000 then ID := {Customer.Customer ID};
Basic syntax ' A line break separates the statements dim ID as number if {Customer.Last Year's Sales} > 10000 then ID = {Customer.Customer ID} formula = ID
' A colon separates the statements dim ID as number : if {Customer.Last Year's Sales} > 10000 then ID = {Customer.Customer ID} : formula = ID 12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 5
Crystal Reports
Crystal versus Basic Formula syntax
Continuing Statements In Crystal syntax you can continue a statement onto the next line by simply starting the text on the next line. In Basic syntax you must use the line continuation character, a space followed by an underscore ( _).
Crystal syntax // Statement is continued by using a line break if {Customer.Last Year's Sales} > 10000 and {Customer.Country} = "USA" then "Good sales"
Basic syntax ' Statement is continued using the underscore if {Customer.Last Year's Sales} > 10000 _ and {Customer.Country} = "USA" then formula = "Good sales" end if
Using Date, Time, or DateTime values When using date, time, or date time values, the Date, Time, and DateTime functions cannot be used in a formula written in Basic syntax. This is because these are all data type names in Basic syntax.
Crystal syntax Date(2000,01,01); // Crystal syntax only Time(13,30,50); // Crystal syntax only DateTime(2000,01,01,13,30,50); // Crystal syntax only CDate(2000,01,01); CTime(13,30,50); CDateTime(2000,01,01,13,30,50); DateValue(2000,01,01); TimeValue(13,30,50); DateTimeValue(2000,01,01,13,30,50);
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 6
Crystal Reports
Crystal versus Basic Formula syntax
Basic syntax Formula = CDate(2000,01,01) Formula = CTime(13,30,50) Formula = CDateTime(2000,01,01,13,30,50) Formula = DateValue(2000,01,01) Formula = TimeValue(13,30,50) Formula = DateTimeValue(2000,01,01,13,30,50)
Extracting Elements from a String You can extract individual elements from a string by specifying the character position or a range of character positions. In Crystal syntax this is done using square brackets [ ] while Basic syntax uses parentheses ( ). Negative values specify a position starting from the end of the string.
Crystal syntax "HELLO" [5] // Returns "O" "HELLO" [-3] // Returns "L" "HELLO" [3 to 4] // Returns "LL" "HELLO" [-3 to 2] // Returns "EL"
Basic syntax formula = "HELLO" (5) ' Returns "O" formula = "HELLO" (-3) ' Returns "L" formula = "HELLO" (3 to 4) ' Returns "LL" formula = "HELLO" (-3 to 2) ' Returns "EL"
Arrays When using arrays, the main differences between the two syntax types are: •
Declaring an array
•
Referencing elements within an array
•
Assigning values to an array
In both syntaxes the result of a formula cannot be an array. The formulas shown in the “Declaring an array” and “Assigning values to an array” sections require additional syntax to ensure the result is a single value and not an array, otherwise the formula will return an error.
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 7
Crystal Reports
Crystal versus Basic Formula syntax
Declaring an Array Crystal syntax uses the Array function to declare an array while Basic syntax uses parenthesis instead.
Crystal syntax StringVar Array MyArray; // Notice the Array function
Basic syntax Dim MyArray() as String ' Notice the parenthesis
Referencing Elements within an Array Crystal syntax uses square brackets [ ] to reference an element within an array whereas Basic syntax uses parenthesis ( )
Crystal syntax MyArray[3] // Notice the square bracket
Basic syntax formula = MyArray(3) ' Notice the parenthesis
Assigning Values to an Array Crystal syntax does not require use of the Array function when assigning values to an array but Basic syntax does use the Array function.
Crystal syntax MyArray := ["a", "b", "c"] // Notice no Array function
Basic syntax MyArrray = Array("a", "b", "c") ' Notice the Array function
Variables A variable represents a specific data item or value, and acts as a placeholder for that value. When a formula encounters a variable, the formula searches for the value of the variable and uses it in the formula. Unlike a constant value, which is fixed and unchanging, a variable can be repeatedly assigned different values. When you assign a value to a variable, the variable maintains the value until you later assign a new value. Because of this flexibility, it is necessary for you to declare variables before you use them so that Crystal Reports is aware of them and understands how you intend to use them. There are three elements involved when declaring variables:
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 8
Crystal Reports
Crystal versus Basic Formula syntax
•
Scope
•
Type
•
Name
Variable Scopes There are three types of variable scopes: •
Local
•
Global
•
Shared
You can use these three types of variable scopes for both Crystal and Basic syntax. However, Crystal syntax does not contain the Dim local scope whereas Basic syntax does. If no scope is specified, the variable will default to a global scope regardless of the formula syntax being used. •
Dim or Local – Dim (Basic syntax only) or Local variables are only recognized within the formula in which they are declared.
•
Global – Global variables use the same memory block to store a value for access throughout a single report object, whether that is the main report or a subreport.
•
Shared – Shared variables are recognized in all report objects within a single Crystal Reports file. Shared variables are frequently used to pass data from subreports to the main report.
Crystal syntax // Variable scope is declared first, then variable type, // then variable name Local CurrencyVar C; Global NumberVar N; Shared StringVar S;
Basic syntax ' Variable scope is declared first, then variable name, _ then variable type Dim B as Boolean Local C as Currency Global N as Number Shared S as String
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 9
Crystal Reports
Crystal versus Basic Formula syntax
Variable Types Variable types can be declared in multiple ways:
Seven simple types Number
Boolean
Currency
Date
String
Time
DateTime
Six range types Number Range
DateTime Range
Currency Range
Date Range
String Range
Time Range
Crystal syntax requires that the variable type be specified when declaring the variable. In Basic syntax if the type is not declared then it will be set when the variable is first used.
Crystal syntax // Note that the type is declared before the variable is // used Global StringVar s; s := “Hello”; s;
Basic syntax ' Note that the type is not declared until the variable is _ used Global S S = “Hello” formula = S
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 10
Crystal Reports
Crystal versus Basic Formula syntax
Variable Names When you declare a variable, you also specify its name. A variable cannot have the same name as any function, operator or other keyword that is valid for the syntax used in the formula. In the Formula Workshop the names of the built-in functions, operators and other keywords are displayed in a different color so it is easy to see if the variable name conflicts.
Declaring Multiple Variables in One Statement In Crystal syntax you must declare variables in separate statements. In Basic syntax you can declare more than one variable in a single statement.
Crystal syntax // Note that X, Y, and Z are declared in separate // statements Local NumberVar X; Local StringVar Y; Local BooleanVar Z; X := 5; Y := "hello"; Z := True; X;
Basic syntax ' Note that X, Y, and Z are declared in a single statement Local X, Y, Z X = 5 Y = "hello" Z = True formula = X
If-Then-Else Control Structures In an IF statement, there are three main differences between Crystal and Basic syntax:
12/28/2004
•
Else If versus ElseIf
•
Single-Line IF statements
•
Multi-Line IF statements
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 11
Crystal Reports
Crystal versus Basic Formula syntax
Else If versus ElseIf In Crystal syntax this command is two words; in Basic syntax it is one word.
Crystal syntax If {Customer.Last Year's Sales} < 100 Then "Under $100" Else If {Customer.Last Year's Sales} in 100 to 200 Then "Between $100 and $200"
Basic syntax If {Customer.Last Year's Sales} < 100 Then formula = "Under $100" ElseIf {Customer.Last Year's Sales} in 100 to 200 Then formula = "Between $100 and $200" End If
Single-Line IF Statements In Basic syntax, a single-line IF statement does not start a new line after the first THEN statement. Line continuation characters such as the underscore (_) can be used to stretch a single-line IF statement over multiple lines. Starting a new line after the first THEN makes an IF statement into a multi-line IF statement.
Crystal syntax // One line StringVar x If {Customer.Customer ID} = 1 then x := "One"; x;
// Two lines without line continuation character StringVar x; If {Customer.Customer ID} = 1 then x := "One"; x;
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 12
Crystal Reports
Crystal versus Basic Formula syntax
Basic syntax ' One line Dim x as string If {Customer.Customer ID} = 1 then x = "One" Formula = x
' Two lines with underscore line continuation character Dim x as string If {Customer.Customer ID} = 1 then _ x = "One" Formula = x
Multi-Line IF Statements More than one statement can be executed as the result of a condition being met. However, in Crystal syntax the two results are enclosed within parentheses whereas Basic syntax encloses the results within the condition using the ElseIf, Else, or End If statements.
Crystal syntax NumberVar x; NumberVar y; If {Customer.Customer ID} = 1 then ( x := 1; y := 2 ); // Notice the parentheses as opposed to End If x;
Basic syntax shared x as number If {Customer.Customer ID} = 1 then x = {Customer.Customer ID} formula = "One" End If ' Notice the End If as opposed to parenthesis
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 13
Crystal Reports
Crystal versus Basic Formula syntax
Select or Case Statements The Select or Case statement is similar to an If-Then-Else statement. However, you can write formulas that are clearer and less repetitive using a Select statement. The major differences between Crystal and Basic syntax are: •
Crystal syntax uses Select while Basic syntax Select Case
•
Crystal syntax uses a colon to separate the result from the output whereas Basic syntax uses a line break
•
Crystal syntax uses Default and Basic syntax uses Case Else
•
Crystal syntax uses two semi colons to end the statement but Basic syntax uses End Select
Crystal syntax Select {Customer.Customer ID} // Notice the Select versus // Select Case Case 1 :
"One" // Notice the colon versus line break
Case 2 :
"Two"
Default : "Other" // Notice Default versus Case Else ;; // Notice the two semicolons versus the End Select
Basic syntax Select Case {Customer.Customer ID} ' Notice the Select Case _ versus Select Case 1
' Notice the line break versus colon
formula = "One" Case 2 formula = "Two" Case Else
' Notice the Case Else versus Default
formula = "Other" End Select ' Notice the End Select versus two semicolons
Looping Loops enable you to evaluate a sequence of statements multiple times. Any one evaluation of a formula can have at most 29,999 loop condition evaluations. Therefore, if a loop structure performs a loop 30,000 or more times, the following error message appears: “A loop was evaluated more than the maximum number of times allowed”. This applies to both Crystal and Basic syntax.
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 14
Crystal Reports
Crystal versus Basic Formula syntax
For/Next Loops For loops require a For Counter variable to count the number of iterations through the loop. If you add a Step statement to the For loop you can control the increment that the For Counter uses. It can be a negative step number if you wish to have the loop go from a large number to a small number. For loops will support an Exit statement. The main differences between Crystal and Basic syntax are: •
Crystal syntax uses the Do statement to begin the contents of the For loop whereas Basic syntax does not.
•
Crystal syntax uses parenthesis around the contents of the For loop while Basic syntax encloses the contents of the For loop by ending it with the Next statement.
Crystal syntax // The following formula will return “abc” Numbervar x; StringVar Array MyArray := ["a","b","c"]; StringVar Concatenate; For x := 1 To count(MyArray) Do // Notice the Do statement ( Concatenate := Concatenate + MyArray[x] ); // Notice the parenthesis versus the Next statement
Basic syntax ' The following formula will return “abc” dim x as number dim MyArray() as string MyArray = Array("a","b","c") dim Concatenate as string For x = 1 To count(MyArray) Step 1 ' Notice there is no Do _ statement Concatenate = Concatenate + MyArray(x) Next x ' Notice the Next statement Formula = Concatenate
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 15
Crystal Reports
Crystal versus Basic Formula syntax
Exiting a For/Next loop You can exit from a For loop by using the Exit For statement. The following example searches the Global array names for the name "Fred". If it finds the name, it returns the index of the name in the array and exits out of the For loop. Even though the For Counter variable is set to loop four times, the formula only loops three times due to the Exit For statement.
Crystal syntax stringvar array names; names := ["Frank", "Helen", "Fred", "Linda"]; numbervar i; numbervar output;
For i := 1 to 4 Do (
If names [i] = "Fred" Then (
output := i; Exit For // Exit the loop once Fred is found
); ); output
Basic syntax Global names () As String names = Array("Frank", "Helen", "Fred", "Linda") Dim i
For i = 1 to 4 If names (i) = "Fred" Then formula = i Exit For ' Exit the loop once Fred is found End If Next I
Do Loops The Do loop that is supported in Crystal syntax is: •
12/28/2004
Do … While
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 16
Crystal Reports
Crystal versus Basic Formula syntax
There are 4 different types of Do Loops supported in Basic syntax: •
Do While … Loop
•
Do Until … Loop
•
Do … Loop While
•
Do … Loop Until
Do … While The Do ... While statement evaluates the expression once no matter what. It then evaluates the condition, and if the condition is true, evaluates the expression again. This process continues until the condition is false. This is the only Do loop supported in Crystal syntax; it is not supported in Basic syntax.
Crystal syntax only // The following formula will return the number 1. The loop // will evaluate once. numbervar x; Do x:=x+1 While x>5; x
Do While … Loop and Do Until … Loop The main difference between these two loops is that the Do While loop evaluates a condition and does actions while the condition is true, whereas the Do Until loop evaluates a condition and does actions until the condition is true. Both loops evaluate the condition first and then do the action. All Do loops support an Exit Do statement.
Basic syntax only ' The following formula will return the number 0. The loop _ will not evaluate. dim x as number Do While x = 2 x = x + 1 Loop formula = x
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 17
Crystal Reports
Crystal versus Basic Formula syntax
' The following formula will return the number 6. The loop _ will evaluate three times. Dim x as number Do Until x > 5 x = x + 2 Loop formula = x
Do … Loop While and Do … Loop Until The main difference between these two loops is that the Do Loop While evaluates the loop while a condition is true, whereas the Do Loop Until evaluates until the condition is true. Both loops do the action first and then evaluate the condition to see if they should loop again. All Do loops support an Exit Do statement
Basic syntax only ' The following formula will return the number 1. The loop _ will evaluate once. dim x as number Do x = x + 1 Loop While x = 2 formula = x
' The following formula will return the number 6. The loop _ will evaluate six times. dim x as number Do x = x + 1 Loop Until x > 5 formula = x
While Loops While loops are similar to Do While Loops except that they generally do not support Exit statements. While loops are supported in both Basic and Crystal syntax . The main differences between Basic syntax and Crystal syntax are: •
12/28/2004
Basic syntax ends a While loop with Wend whereas Crystal syntax encloses the contents of the While loop with parenthesis
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 18
Crystal Reports
Crystal versus Basic Formula syntax
•
Crystal syntax requires While…Do whereas Basic syntax only requires While
•
Crystal syntax supports the Exit While statement whereas Basic syntax does not
Crystal syntax // The following formula will return the value of 1 // and will not evaluate the loop due to the exit while // statement numbervar x; While x < 3 Do // Notice the While Do statement versus While ( x := x + 1; if x = 1 then exit while; // Notice the Exit While // statement );
// Notice the parenthesis versus the Wend statement x
Basic syntax ' The following formula will return the number 1 and _ evaluate the loop once dim x as number While x = 0 ' Notice the While statement versus While Do x = x + 1 Wend ' Notice the Wend statement versus parenthesis Formula = x
www.businessobjects.com The Business Objects product and technology are protected by US patent numbers 5,555,403; 6,247,008; 6,578,027; 6,490,593; and 6,289,352. The Business Objects logo, the Business Objects tagline, BusinessObjects, BusinessObjects Broadcast Agent, BusinessQuery, Crystal Analysis, Crystal Analysis Holos, Crystal Applications, Crystal Enterprise, Crystal Info, Crystal Reports, Rapid Mart, and WebIntelligence are trademarks or registered trademarks of Business Objects SA in the United States and/or other countries. Various product and service names referenced herein may be trademarks of Business Objects SA. All other company, product, or brand names mentioned herein, may be the trademarks of their respective owners. Specifications subject to change without notice. Not responsible for errors or omissions. Copyright © 2004 Business Objects SA. All rights reserved.
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 19
Overview Crystal Reports version 8 and higher offers two different syntaxes for writing formulas: the Crystal syntax and the Basic syntax. This paper describes some of the differences between the two syntaxes and provides general information on the control structures that are available for the syntaxes.
Contents INTRODUCTION ............................................................................................ 3 FORMULA COMMENTS ................................................................................. 3 Crystal syntax .................................................................................................... 3 Basic syntax....................................................................................................... 3
THE RESULT OF A FORMULA........................................................................ 4 Formula Variable ........................................................................................4 Crystal syntax .................................................................................................... 4 Basic syntax....................................................................................................... 4
Output of the Formula .................................................................................4 Crystal syntax .................................................................................................... 4 Basic syntax....................................................................................................... 4
ASSIGNMENT OPERATOR ............................................................................. 5 Crystal syntax .................................................................................................... 5 Basic syntax....................................................................................................... 5
STATEMENTS .............................................................................................. 5 Separating Statements..................................................................................5 Crystal syntax .................................................................................................... 5 Basic syntax....................................................................................................... 5
Continuing Statements .................................................................................6 Crystal syntax .................................................................................................... 6 Basic syntax....................................................................................................... 6
USING DATE, TIME, OR DATETIME VALUES .................................................. 6 Crystal syntax .................................................................................................... 6 Basic syntax....................................................................................................... 7
EXTRACTING ELEMENTS FROM A STRING ..................................................... 7 Crystal syntax .................................................................................................... 7 Basic syntax....................................................................................................... 7
ARRAYS ..................................................................................................... 7
12/28/2004 12:12 PM
Copyright © 2004 Business Objects. All rights reserved.
Page 1
Crystal Reports
Crystal versus Basic Formula syntax
Declaring an Array......................................................................................8 Crystal syntax .................................................................................................... 8 Basic syntax....................................................................................................... 8
Referencing Elements within an Array ........................................................8 Crystal syntax .................................................................................................... 8 Basic syntax....................................................................................................... 8
Assigning values to an array........................................................................8 Crystal syntax .................................................................................................... 8 Basic syntax....................................................................................................... 8
VARIABLES ................................................................................................. 8 Variable Scopes ...........................................................................................9 Crystal syntax .................................................................................................... 9 Basic syntax....................................................................................................... 9
Variable Types ...........................................................................................10 Crystal syntax .................................................................................................. 10 Basic syntax..................................................................................................... 10
Variable Names..........................................................................................11 Declaring Multiple Variables in One Statement ........................................11 Crystal syntax .................................................................................................. 11 Basic syntax..................................................................................................... 11
IF-THEN-ELSE CONTROL STRUCTURES ...................................................... 11 Else If versus ElseIf....................................................................................12 Crystal syntax .................................................................................................. 12 Basic syntax..................................................................................................... 12
Single-Line IF Statements ..........................................................................12 Crystal syntax .................................................................................................. 12 Basic syntax..................................................................................................... 13
Multi-Line IF Statements ...........................................................................13 Crystal syntax .................................................................................................. 13 Basic syntax..................................................................................................... 13
SELECT OR CASE STATEMENTS ................................................................. 14 Crystal syntax .................................................................................................. 14 Basic syntax..................................................................................................... 14
LOOPING .................................................................................................. 14 For/Next Loops ..........................................................................................15 Crystal syntax .................................................................................................. 15 Basic syntax..................................................................................................... 15
Exiting a For/Next loop .............................................................................16 Crystal syntax .................................................................................................. 16 Basic syntax..................................................................................................... 16
Do Loops....................................................................................................16 Do … While..................................................................................................... 17 Crystal syntax only .......................................................................................... 17 Do While … Loop and Do Until … Loop ....................................................... 17 Basic syntax only............................................................................................. 17 Do … Loop While and Do … Loop Until ....................................................... 18 Basic syntax only............................................................................................. 18
While Loops ...............................................................................................18 Crystal syntax .................................................................................................. 19 Basic syntax..................................................................................................... 19
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 2
Crystal Reports
Crystal versus Basic Formula syntax
Introduction Most formulas in Crystal Reports can be written in either Crystal or Basic syntax. However, Record Selection and Group Selection formulas must be written in Crystal syntax. Crystal syntax is similar to formula writing in C++ while Basic syntax is similar to formula writing in Microsoft Visual Basic.
Formula Comments Formula comments are notes included with a formula to explain its design and operation. Comments do not print and they do not affect the formula; they appear only in the Formula Workshop. Use comments to explain the purpose of a formula or explain the steps involved in writing it. Crystal syntax uses two forward slashes (//) to denote a comment. Comments can begin on a new line or on the same line as the rest of the code. Comments begin with Rem or an apostrophe (‘). A comment beginning with Rem is a separate statement and must begin on a new line or must be separated from the rest of the line by a colon. A comment beginning with an apostrophe can begin on the same line as the rest of the code without needing to be separated by a colon.
Crystal syntax // This is a comment in Crystal syntax "Hello World"
Basic syntax Rem This is a comment in Basic syntax formula = "Hello World" : Rem This is a comment in Basic _ syntax
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 3
Crystal Reports
Crystal versus Basic Formula syntax
The Result of a Formula There are two main differences between Crystal and Basic syntax when returning the result of a formula: •
Basic syntax uses a special variable called formula whereas Crystal syntax does not.
•
Basic syntax returns the value assigned to the formula variable whereas Crystal syntax returns the last line within the formula.
Formula Variable Basic syntax requires a special variable called formula to return the value of the formula whereas Crystal syntax does not.
Crystal syntax // This formula will output "Hello World" "Hello World"
Basic syntax ' This formula will output "Hello World" Formula = "Hello World"
Output of the Formula Crystal syntax returns the last line within the formula while Basic syntax returns the value after the special variable called “formula”. This means that in Basic syntax there can be other statements below the variable but the formula will not output these values.
Crystal syntax // This formula will output the number 5 Numbervar x; "Hello World"; x :=5
Basic syntax ' This formula will output "Hello World" Dim x as number Formula = “Hello World” x = 5
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 4
Crystal Reports
Crystal versus Basic Formula syntax
Assignment Operator The assignment operator is the colon equal sign (:=) in Crystal syntax as opposed to the equal sign (=) in Basic syntax.
Crystal syntax Numbervar x; x := 5; // Notice the colon equal sign versus the equal // sign x;
Basic syntax dim x as number x = 5 ' Notice the equal sign versus the colon equal sign formula = x
Statements All formulas exist as a sequence of statements. For a formula to evaluate correctly, these statements must be separated and continued correctly.
Separating Statements In Crystal syntax a semicolon must separate each statement (;). In Basic syntax, either a new line or a colon must separate statements (:).
Crystal syntax // A semicolon separates the statements Numbervar ID; if {Customer.Last Year's Sales} > 10000 then ID := {Customer.Customer ID};
Basic syntax ' A line break separates the statements dim ID as number if {Customer.Last Year's Sales} > 10000 then ID = {Customer.Customer ID} formula = ID
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 5
Crystal Reports
Crystal versus Basic Formula syntax
Continuing Statements In Crystal syntax you can continue a statement onto the next line by simply starting the text on the next line. In Basic syntax you must use the line continuation character, a space followed by an underscore ( _).
Crystal syntax // Statement is continued by using a line break if {Customer.Last Year's Sales} > 10000 and {Customer.Country} = "USA" then "Good sales"
Basic syntax ' Statement is continued using the underscore if {Customer.Last Year's Sales} > 10000 _ and {Customer.Country} = "USA" then formula = "Good sales" end if
Using Date, Time, or DateTime values When using date, time, or date time values, the Date, Time, and DateTime functions cannot be used in a formula written in Basic syntax. This is because these are all data type names in Basic syntax.
Crystal syntax Date(2000,01,01); // Crystal syntax only Time(13,30,50); // Crystal syntax only DateTime(2000,01,01,13,30,50); // Crystal syntax only CDate(2000,01,01); CTime(13,30,50); CDateTime(2000,01,01,13,30,50); DateValue(2000,01,01); TimeValue(13,30,50); DateTimeValue(2000,01,01,13,30,50);
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 6
Crystal Reports
Crystal versus Basic Formula syntax
Basic syntax Formula = CDate(2000,01,01) Formula = CTime(13,30,50) Formula = CDateTime(2000,01,01,13,30,50) Formula = DateValue(2000,01,01) Formula = TimeValue(13,30,50) Formula = DateTimeValue(2000,01,01,13,30,50)
Extracting Elements from a String You can extract individual elements from a string by specifying the character position or a range of character positions. In Crystal syntax this is done using square brackets [ ] while Basic syntax uses parentheses ( ). Negative values specify a position starting from the end of the string.
Crystal syntax "HELLO" [5] // Returns "O" "HELLO" [-3] // Returns "L" "HELLO" [3 to 4] // Returns "LL" "HELLO" [-3 to 2] // Returns "EL"
Basic syntax formula = "HELLO" (5) ' Returns "O" formula = "HELLO" (-3) ' Returns "L" formula = "HELLO" (3 to 4) ' Returns "LL" formula = "HELLO" (-3 to 2) ' Returns "EL"
Arrays When using arrays, the main differences between the two syntax types are: •
Declaring an array
•
Referencing elements within an array
•
Assigning values to an array
In both syntaxes the result of a formula cannot be an array. The formulas shown in the “Declaring an array” and “Assigning values to an array” sections require additional syntax to ensure the result is a single value and not an array, otherwise the formula will return an error.
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 7
Crystal Reports
Crystal versus Basic Formula syntax
Declaring an Array Crystal syntax uses the Array function to declare an array while Basic syntax uses parenthesis instead.
Crystal syntax StringVar Array MyArray; // Notice the Array function
Basic syntax Dim MyArray() as String ' Notice the parenthesis
Referencing Elements within an Array Crystal syntax uses square brackets [ ] to reference an element within an array whereas Basic syntax uses parenthesis ( )
Crystal syntax MyArray[3] // Notice the square bracket
Basic syntax formula = MyArray(3) ' Notice the parenthesis
Assigning Values to an Array Crystal syntax does not require use of the Array function when assigning values to an array but Basic syntax does use the Array function.
Crystal syntax MyArray := ["a", "b", "c"] // Notice no Array function
Basic syntax MyArrray = Array("a", "b", "c") ' Notice the Array function
Variables A variable represents a specific data item or value, and acts as a placeholder for that value. When a formula encounters a variable, the formula searches for the value of the variable and uses it in the formula. Unlike a constant value, which is fixed and unchanging, a variable can be repeatedly assigned different values. When you assign a value to a variable, the variable maintains the value until you later assign a new value. Because of this flexibility, it is necessary for you to declare variables before you use them so that Crystal Reports is aware of them and understands how you intend to use them. There are three elements involved when declaring variables:
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 8
Crystal Reports
Crystal versus Basic Formula syntax
•
Scope
•
Type
•
Name
Variable Scopes There are three types of variable scopes: •
Local
•
Global
•
Shared
You can use these three types of variable scopes for both Crystal and Basic syntax. However, Crystal syntax does not contain the Dim local scope whereas Basic syntax does. If no scope is specified, the variable will default to a global scope regardless of the formula syntax being used. •
Dim or Local – Dim (Basic syntax only) or Local variables are only recognized within the formula in which they are declared.
•
Global – Global variables use the same memory block to store a value for access throughout a single report object, whether that is the main report or a subreport.
•
Shared – Shared variables are recognized in all report objects within a single Crystal Reports file. Shared variables are frequently used to pass data from subreports to the main report.
Crystal syntax // Variable scope is declared first, then variable type, // then variable name Local CurrencyVar C; Global NumberVar N; Shared StringVar S;
Basic syntax ' Variable scope is declared first, then variable name, _ then variable type Dim B as Boolean Local C as Currency Global N as Number Shared S as String
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 9
Crystal Reports
Crystal versus Basic Formula syntax
Variable Types Variable types can be declared in multiple ways:
Seven simple types Number
Boolean
Currency
Date
String
Time
DateTime
Six range types Number Range
DateTime Range
Currency Range
Date Range
String Range
Time Range
Crystal syntax requires that the variable type be specified when declaring the variable. In Basic syntax if the type is not declared then it will be set when the variable is first used.
Crystal syntax // Note that the type is declared before the variable is // used Global StringVar s; s := “Hello”; s;
Basic syntax ' Note that the type is not declared until the variable is _ used Global S S = “Hello” formula = S
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 10
Crystal Reports
Crystal versus Basic Formula syntax
Variable Names When you declare a variable, you also specify its name. A variable cannot have the same name as any function, operator or other keyword that is valid for the syntax used in the formula. In the Formula Workshop the names of the built-in functions, operators and other keywords are displayed in a different color so it is easy to see if the variable name conflicts.
Declaring Multiple Variables in One Statement In Crystal syntax you must declare variables in separate statements. In Basic syntax you can declare more than one variable in a single statement.
Crystal syntax // Note that X, Y, and Z are declared in separate // statements Local NumberVar X; Local StringVar Y; Local BooleanVar Z; X := 5; Y := "hello"; Z := True; X;
Basic syntax ' Note that X, Y, and Z are declared in a single statement Local X, Y, Z X = 5 Y = "hello" Z = True formula = X
If-Then-Else Control Structures In an IF statement, there are three main differences between Crystal and Basic syntax:
12/28/2004
•
Else If versus ElseIf
•
Single-Line IF statements
•
Multi-Line IF statements
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 11
Crystal Reports
Crystal versus Basic Formula syntax
Else If versus ElseIf In Crystal syntax this command is two words; in Basic syntax it is one word.
Crystal syntax If {Customer.Last Year's Sales} < 100 Then "Under $100" Else If {Customer.Last Year's Sales} in 100 to 200 Then "Between $100 and $200"
Basic syntax If {Customer.Last Year's Sales} < 100 Then formula = "Under $100" ElseIf {Customer.Last Year's Sales} in 100 to 200 Then formula = "Between $100 and $200" End If
Single-Line IF Statements In Basic syntax, a single-line IF statement does not start a new line after the first THEN statement. Line continuation characters such as the underscore (_) can be used to stretch a single-line IF statement over multiple lines. Starting a new line after the first THEN makes an IF statement into a multi-line IF statement.
Crystal syntax // One line StringVar x If {Customer.Customer ID} = 1 then x := "One"; x;
// Two lines without line continuation character StringVar x; If {Customer.Customer ID} = 1 then x := "One"; x;
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 12
Crystal Reports
Crystal versus Basic Formula syntax
Basic syntax ' One line Dim x as string If {Customer.Customer ID} = 1 then x = "One" Formula = x
' Two lines with underscore line continuation character Dim x as string If {Customer.Customer ID} = 1 then _ x = "One" Formula = x
Multi-Line IF Statements More than one statement can be executed as the result of a condition being met. However, in Crystal syntax the two results are enclosed within parentheses whereas Basic syntax encloses the results within the condition using the ElseIf, Else, or End If statements.
Crystal syntax NumberVar x; NumberVar y; If {Customer.Customer ID} = 1 then ( x := 1; y := 2 ); // Notice the parentheses as opposed to End If x;
Basic syntax shared x as number If {Customer.Customer ID} = 1 then x = {Customer.Customer ID} formula = "One" End If ' Notice the End If as opposed to parenthesis
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 13
Crystal Reports
Crystal versus Basic Formula syntax
Select or Case Statements The Select or Case statement is similar to an If-Then-Else statement. However, you can write formulas that are clearer and less repetitive using a Select statement. The major differences between Crystal and Basic syntax are: •
Crystal syntax uses Select while Basic syntax Select Case
•
Crystal syntax uses a colon to separate the result from the output whereas Basic syntax uses a line break
•
Crystal syntax uses Default and Basic syntax uses Case Else
•
Crystal syntax uses two semi colons to end the statement but Basic syntax uses End Select
Crystal syntax Select {Customer.Customer ID} // Notice the Select versus // Select Case Case 1 :
"One" // Notice the colon versus line break
Case 2 :
"Two"
Default : "Other" // Notice Default versus Case Else ;; // Notice the two semicolons versus the End Select
Basic syntax Select Case {Customer.Customer ID} ' Notice the Select Case _ versus Select Case 1
' Notice the line break versus colon
formula = "One" Case 2 formula = "Two" Case Else
' Notice the Case Else versus Default
formula = "Other" End Select ' Notice the End Select versus two semicolons
Looping Loops enable you to evaluate a sequence of statements multiple times. Any one evaluation of a formula can have at most 29,999 loop condition evaluations. Therefore, if a loop structure performs a loop 30,000 or more times, the following error message appears: “A loop was evaluated more than the maximum number of times allowed”. This applies to both Crystal and Basic syntax.
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 14
Crystal Reports
Crystal versus Basic Formula syntax
For/Next Loops For loops require a For Counter variable to count the number of iterations through the loop. If you add a Step statement to the For loop you can control the increment that the For Counter uses. It can be a negative step number if you wish to have the loop go from a large number to a small number. For loops will support an Exit statement. The main differences between Crystal and Basic syntax are: •
Crystal syntax uses the Do statement to begin the contents of the For loop whereas Basic syntax does not.
•
Crystal syntax uses parenthesis around the contents of the For loop while Basic syntax encloses the contents of the For loop by ending it with the Next
Crystal syntax // The following formula will return “abc” Numbervar x; StringVar Array MyArray := ["a","b","c"]; StringVar Concatenate; For x := 1 To count(MyArray) Do // Notice the Do statement ( Concatenate := Concatenate + MyArray[x] ); // Notice the parenthesis versus the Next statement
Basic syntax ' The following formula will return “abc” dim x as number dim MyArray() as string MyArray = Array("a","b","c") dim Concatenate as string For x = 1 To count(MyArray) Step 1 ' Notice there is no Do _ statement Concatenate = Concatenate + MyArray(x) Next x ' Notice the Next statement Formula = Concatenate
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 15
Crystal Reports
Crystal versus Basic Formula syntax
Exiting a For/Next loop You can exit from a For loop by using the Exit For statement. The following example searches the Global array names for the name "Fred". If it finds the name, it returns the index of the name in the array and exits out of the For loop. Even though the For Counter variable is set to loop four times, the formula only loops three times due to the Exit For statement.
Crystal syntax stringvar array names; names := ["Frank", "Helen", "Fred", "Linda"]; numbervar i; numbervar output;
For i := 1 to 4 Do (
If names [i] = "Fred" Then (
output := i; Exit For // Exit the loop once Fred is found
); ); output
Basic syntax Global names () As String names = Array("Frank", "Helen", "Fred", "Linda") Dim i
For i = 1 to 4 If names (i) = "Fred" Then formula = i Exit For ' Exit the loop once Fred is found End If Next I
Do Loops The Do loop that is supported in Crystal syntax is: •
12/28/2004
Do … While
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 16
Crystal Reports
Crystal versus Basic Formula syntax
There are 4 different types of Do Loops supported in Basic syntax: •
Do While … Loop
•
Do Until … Loop
•
Do … Loop While
•
Do … Loop Until
Do … While The Do ... While statement evaluates the expression once no matter what. It then evaluates the condition, and if the condition is true, evaluates the expression again. This process continues until the condition is false. This is the only Do loop supported in Crystal syntax; it is not supported in Basic syntax.
Crystal syntax only // The following formula will return the number 1. The loop // will evaluate once. numbervar x; Do x:=x+1 While x>5; x
Do While … Loop and Do Until … Loop The main difference between these two loops is that the Do While loop evaluates a condition and does actions while the condition is true, whereas the Do Until loop evaluates a condition and does actions until the condition is true. Both loops evaluate the condition first and then do the action. All Do loops support an Exit Do statement.
Basic syntax only ' The following formula will return the number 0. The loop _ will not evaluate. dim x as number Do While x = 2 x = x + 1 Loop formula = x
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 17
Crystal Reports
Crystal versus Basic Formula syntax
' The following formula will return the number 6. The loop _ will evaluate three times. Dim x as number Do Until x > 5 x = x + 2 Loop formula = x
Do … Loop While and Do … Loop Until The main difference between these two loops is that the Do Loop While evaluates the loop while a condition is true, whereas the Do Loop Until evaluates until the condition is true. Both loops do the action first and then evaluate the condition to see if they should loop again. All Do loops support an Exit Do statement
Basic syntax only ' The following formula will return the number 1. The loop _ will evaluate once. dim x as number Do x = x + 1 Loop While x = 2 formula = x
' The following formula will return the number 6. The loop _ will evaluate six times. dim x as number Do x = x + 1 Loop Until x > 5 formula = x
While Loops While loops are similar to Do While Loops except that they generally do not support Exit statements. While loops are supported in both Basic and Crystal syntax . The main differences between Basic syntax and Crystal syntax are: •
12/28/2004
Basic syntax ends a While loop with Wend whereas Crystal syntax encloses the contents of the While loop with parenthesis
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 18
Crystal Reports
Crystal versus Basic Formula syntax
•
Crystal syntax requires While…Do whereas Basic syntax only requires While
•
Crystal syntax supports the Exit While statement whereas Basic syntax does not
Crystal syntax // The following formula will return the value of 1 // and will not evaluate the loop due to the exit while // statement numbervar x; While x < 3 Do // Notice the While Do statement versus While ( x := x + 1; if x = 1 then exit while; // Notice the Exit While // statement );
// Notice the parenthesis versus the Wend statement x
Basic syntax ' The following formula will return the number 1 and _ evaluate the loop once dim x as number While x = 0 ' Notice the While statement versus While Do x = x + 1 Wend ' Notice the Wend statement versus parenthesis Formula = x
www.businessobjects.com The Business Objects product and technology are protected by US patent numbers 5,555,403; 6,247,008; 6,578,027; 6,490,593; and 6,289,352. The Business Objects logo, the Business Objects tagline, BusinessObjects, BusinessObjects Broadcast Agent, BusinessQuery, Crystal Analysis, Crystal Analysis Holos, Crystal Applications, Crystal Enterprise, Crystal Info, Crystal Reports, Rapid Mart, and WebIntelligence are trademarks or registered trademarks of Business Objects SA in the United States and/or other countries. Various product and service names referenced herein may be trademarks of Business Objects SA. All other company, product, or brand names mentioned herein, may be the trademarks of their respective owners. Specifications subject to change without notice. Not responsible for errors or omissions. Copyright © 2004 Business Objects SA. All rights reserved.
12/28/2004
Copyright © 2004 Business Objects. All rights reserved.
basic_vs_crystal_syntax.pdf
Page 19
Related Documents
Basic Vs Crystal Syntax
November 2019 15
08 Basic Syntax Ii
November 2019 15
Basic Java Syntax
November 2019 12
Basic Php Syntax
May 2020 7
Sql Syntax Basic
November 2019 18