Automated Fms Robots For Automated Cnc Interface

FMS Applications Corecon is an experienced leader in factory automation with a full line of accessories for our AGV’s. FMS load table are perfect for flexible manufacturing applications. These tables allow a customers’ metal fixturing pallet, carrying a manufactured part, to be transported by our AGV’s. Repeated placement of the fixture and part within plus or minus .015" can be achieved. This accuracy is ideal for interfacing with CNC and automated machinery stations. Tables can be designed to fit both our DSL and REL series AGV’s.

REL AGV/FMS TABLE Tables can also be designed to fit our REL version forktruck type AGV. The vehicle shown above was designed for General Electric in their aircraft engine manufacturing facility. The FMS table allows for precise part positioning for machining operations. DSL series AGV’s equipped with

DSL series AGV’s can also be adapted with a shuttles for precise part transfer.

REL INTERFACING WITH CNC

FMS tables shown above interfacing with CNC machines from Cincinnati Milacron.

CORECON

DSL SERIES FMS AGV Corecon’s dual drive DSL series make an ideal AGV carrier for FMS applications. With two standard models available with either a 4,000 Lb. or 8,000 Lb. capacity payload.

DSL SHUTTLE

DSL INTERFACING WITH CNC

775 North Duvick Ave. Sandwich, IL 60548 PH.:(815) 786-1001 FAX:(630) 786-1007 http://www.coreconagvs.com