Autocad Architecture Segment 1

ATP239 Start Using AutoCAD® Architecture Now! Segment 1

Date: March 9, 2009 Instructor: Beth Powell Level: Beginner Category: AutoCAD Architecture

Web: www.AUGI.com

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

1

Introduction AutoCAD Architecture (ACA) or Architectural Desktop (ADT) is based on AutoCAD. Therefore, it can be used exactly as if you only installed AutoCAD. Yes, you can even choose during installation to create a shortcut for AutoCAD. The fact that you can use AutoCAD commands and may have a history with using AutoCAD is part of the beauty of AutoCAD Architecture. You’re certainly not breaking any rules in only using linework and the CAD Police will not haul you away. The real question is what feature(s) prompted you or your firm to purchase this program instead of plain, vanilla AutoCAD? If you are only using it as AutoCAD, then you really aren’t getting anything out of your investment. I understand all too well how overwhelming AutoCAD Architecture can be. I also understand that there are small steps that you can take to start using AutoCAD Architecture NOW!

What are the differences between AutoCAD and AutoCAD Architecture? AutoCAD Architecture relies on objects, rather than linework. Objects are not just blocks, but are 3D objects that understand their identity, how to get along with other objects, and have much more intelligence in the form of properties and property sets. An example of this is a door. In AutoCAD, you might use a block of a door symbol in plan view. You could assign attributes to the door, but you probably would not have several different door blocks with different attributes. If you drew multilines or a line with an offset to represent a wall and inserted the door block, you would need to trim those lines. If you moved the door, you would need to use the trim and extend commands with this process. With AutoCAD Architecture, a door knows it is a door. It knows that doors are found in walls. There are not doors in windows or roofs. There are not doors in lines. There are not doors in green eggs and ham! The door knows its place in the food chain of architecture. It knows that it belongs in a wall. The wall knows its place as well. It welcomes the door openly by creating an opening in itself for the door. When you move the door, the opening moves right along with it. As a bonus, you can view this in a 3D view or schedule it.

The Interface Besides the basic difference between objects and linework, there are differences in the Interface between AutoCAD and ACA/ADT. First, there are some additional pull-down menus and toolbars.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

2

From the Window pulldown menu, you have Pulldowns listed. This flies out to include an optional Design, Document, and CAD Manager pulldown menu just to name a few. The Design and Document pulldown menus are available in addition to the Tool Palettes. The CAD Manager pull-down is useful to access keynote editing and other features that are not found elsewhere. There is a Navigation Toolbar that provides you with access to some of ACA/ADT’s Tools such as the Content Browser, Project Browser, Project Navigator, Detail Component Manager and the AutoCAD tools of Tool Palettes and Design Center.

The Standard Toolbar where you typically find New, Open, Save, Plot contains two additional tool buttons. One is for Object Inspect and the more important one at the very end is to Regenerate Model. (It reminds me of a factory with two gold-colored wheels in front of it.)

If you come from a long history with AutoCAD, you may remember the command REGEN that we had to type to regenerate the drawing. This works a little differently as it is regenerating objects in your model. If you make some changes that you don’t seem to see, use this button and see if it appears.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

3

Instead of the Draw Toolbar, ACA/ADT has a shapes toolbar. You’ll notice that there isn’t a tool for Hatch or Mtext. Also, the construction line tool acts differently than the AutoCAD counterpart. When you set a template, start with an ACA/ADT out of the box template. That’s because you’ll have display configurations built in. If you start with your typical AutoCAD template, you’ll never see this in your Drawing Status Bar at all.

One of the biggest differences in the Drawing Status Bar (top one that is closest to the drawing) is the Display Configuration. By default, this is set to Medium Detail. Display Configuration is an important part of ACA/ADT. We’ll talk more about that when we get into Styles.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

4

In your Drawing Status Bar is a tiny, microscopic arrow in the lower lefthand corner. This is a shortcut to many commands, but it is one-way (Format pulldown is another way) to access the Drawing Setup. This includes units among several other items. There is no Format>Units in ACA/ADT as there is in AutoCAD. We’re not going to go into any detail on the components of this in this class. This is typically set in your template.

Tool Palettes While there are tool palettes in AutoCAD, the tool palettes in AutoCAD Architecture are your best tool for designing and documenting with the software. Tool Palettes are divided into four basic groups. Of course, you can still customize every bit as much as AutoCAD and perhaps more. There are coordinating workspaces for each Tool Palette Group, as well. To see the Tool Palette Groups and to change Groups, left-click on the Tool Palette Properties button at the very bottom of any Tool Palette.

Design Tool Palette This tool palette is where tools are stored that you use to create your architectural design. There are some individual tabs, or palettes, that have samples of wall styles, window styles, and door styles. Design: This tool palette is your generic link to creating architectural objects.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

5

Document Tool Palette This tool palette is where tools are stored that you use to document your design. Some of the tabs, or individual palettes, are as follows.
Annotation: Contains tools such as text and leader that you could also use from basic AutoCAD commands. Using these tools instead ensures that the annotation will automatically go on the annotation layer. (Discussed more under Layer Key Styles)
Dimensions: AEC Dimensions
Callouts: Tools for creating sections, elevations, and callouts for details.
Tags: Door and Window tags.
Scheduling: Some sample schedules.

Detailing Tool Palette This tool palette is where tools are stored that you use to you create details using the AutoCAD Architecture Detailing feature. Detail components are arranged under the CSI MasterFormat 2004 System. We will not be discussing detailing in this course.

:

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

6

Visualization Tool Palette This tool palette contains tools to control how to visualize your design.

Let’s Design! Now that we’ve seen our tools, let’s start to use them. We begin with our Design Tool Palette. The Design Tool Palette within the Design Tool Palette Group is made up of design tools based on the Standard style. That means that it’s generic. There will be no hatch pattern, visualization, or specific materials to display. Choose Wall from the Design Tool Palette. When you choose any tool from the palettes, the Properties Palette will open automatically. This gives you the opportunity to set anything about the object (wall width, base height, etc.) before you create the first wall. If you close the Properties Palette, it will open for you the next time you choose a tool. This might seem annoying, but if you are a new user, this might be a good reminder for you. Experienced users often keep the Properties Palette open, but minimized and move to it as needed. Of course, you can also use the optio ns at your com man d line if you prefe r.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

7

Drawing walls is simple. It’s really no different from drawing a line. You can continue drawing additional walls in any direction by selecting two points or entering distances. You will remain in the WallAdd command until you close the command by right-clicking or pressing Enter.

Notice how the walls automatically make nice clean transitions as you turn corners or cross other walls? That is referred to as wall cleanup. That is one of the benefits of using AutoCAD Architecture rather than just drawing two offset lines. It’s much faster isn’t it? Congratulations, you’ve just seen how easy it is to draw walls. That’s your first step in using AutoCAD Architecture. Now, let’s add a door and some windows. You’ll see that it’s just as easy.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

8

Select the Door tool from our friendly Design Tool Palette. You have properties you can change about the door such as the height and width. You are prompted to Select wall. Choose the wall for your door. Watch as the door swing changes from inside to outside depending on which way you move your cursor.

When you scroll down through the Properties Palette, you will see a section of the properties for Location. This will be similar for Windows as well. The default for this is set to Offset/Center with an Automatic Offset of 6”. This means that when you place a door you are forced to either place the door in the Center (think mid-point) of the wall or 6” off the end of the wall. If you change this from Offset/Center to Unconstrained, you will then have the ability to place your door anywhere along the wall.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

9

When placing the door with the Location Position Along Wall set to Unconstrained, you can use your Tab key to toggle between each side of the door. Perhaps you want the door located 8’ from the end of the wall on one side or you want it at 20’ on the other side. Simply toggle and type. Select the wall and place the door. Adding Windows is very similar.

Layer Keys Did you notice that your walls are one color, your door a different color, and if you added windows they are different colors too? If you didn’t notice (perhaps because you are so excited about your magnificent design you just created), then select each of these objects and determine what layer they are drawn on in your design.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

10

Do you remember changing to any of these layers? Do you remember having anything to do with layers? You’re not hung over. ACA/ADT has what are called Layer Keys. These are set to use the AIA Layer Guidelines. The Layer Keys are smart enough to know that if you use any Wall tools that it should go on the A-Wall Layer. If you use a door tool, doors will end up on the ADoor Layer. That of course saves you time and saves a lot of human error. You don’t have to remember to change the layer before you create an object. A real bonus for CAD Managers! Because of Layer Keys and the way that the Styles are configured, you cannot simply turn off the layer that the door swing is on as you would in AutoCAD. No fear, you can do this in a number of methods whether in the style, through a display configuration, or through the Display tab of your Properties Palette. Think of the styles as having layers within layers. These are usually defined in the color, linetype, and hatch pattern by the type of material (think building material), but can be set to whatever you prefer.

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

11

Remember to post your questions and comments in the course forum and I’ll see you in the AUGI forums. Remember that this material is only a portion of the class, support is always available online in the private course forum. I encourage you to visit the course forum and ask any questions that you may have about this segment or simply join in the discussion. The ATP Mantra is: the only stupid question is the one you don’t ask. Thanks again for attending this course!

Reuse of any or all material contained within this document for commercial purposes, without the express written consent of AUGI, Inc. or its authorized agents is expressly prohibited. © Copyright 2009 Autodesk User Group International, Inc. All rights reserved.

12