Amss-procedures

AMSS Procedures Instructor: Spc Bragg

References AR 700-138, 16 June 1993, Army Logistics Readiness and Sustainability, with the exception of "Table B-1". Materiel Condition Status Reporting System - Reportable Items List (Updated semi-annually). Unit Level Logistics System -- Ground (ULLS-G) End User Manual (EUM), 15 June 1996.

What is ULLS? ULLS is a menu driven, real-time (non-batch) system which supports multiple conconcurrent users. ULLS contains basic access control for data security in database. Authorized users in ULLSG are classed by DODAAC. In ULLS-A and ULLS-S4 the users are classed by UIC. All three baselines use a security system controlled by a user ID and password.

What is ULLS? (Cont.) ULLS includes software to automate or replace the maintenance and supply documents and processes. Many of the processes produce reports, which are very useful for managing both the supply and the equipment maintenance functions of the unit. The ULLS system is mobile, and the current plan is that it will be taken with the units wherever they go.

What is AMSS? The Commander’s Guide for the Unit Level Logistics System-Ground identifies key AMSS reports that can be used to monitor readiness. These reports provide non-mission-capable information for reportable equipment, including systems and their associated subsystems. Unit personnel can run these reports any time during the report period at the unit level. Three of these reports can be rolled up to the battalion or brigade level. One of these reports--the Projection Report--displays projected FMC and NMC rates for all reportable equipment items in order to identify equipment that may not meet the DA goal for the period.

What is AMSS (Cont.) Unit commanders should determine the frequency for generating AMSS reports and the positions responsible for reviewing such reports in their unit SOP for ULLS-G or in their maintenance SOP. Commanders should do the same for systemgenerated maintenance and supply reports. In doing so, commanders provide their ULLS-G operator with a guide that describes how often they need to produce each report and who should receive the report.

Daily Reports Several AMSS reports are available to the user, daily. The Send AMSS Transactions to Higher Level can also be processed daily to provide battalion level reporting. The following procedure is used for selecting each report. The two “most popular” reports are:

Daily Reports (Cont.) Projection Report: This can be run at any time and projects end of period readiness based upon data processed to date. This is what your readiness report will reflect if there are no other changes.

Non-Mission Capable Report: Provides the same information as the “Backside 2406”.

Running the AMSS The Army Material Status System (AMSS): The AMSS "End of Report Period" process will be run at the start of the 16th of the month if it is a business day, or the first business day following the 16th of the month. This report is run to capture the data ending on the 15th. This report contains data that units need to complete their monthly Unit Status Report (USR) and Readiness Reports. The Following steps spell out the proper sequence of events to accomplish the AMSS - "END OF REPORT PERIOD" process.

Before Running AMSS Back-up your database This is the most important step. This ensures that if a problem arises that no data is lost. Backing up is mandatory for all shops to do on a daily basis.

Verify Information Take time here to verify unit data. The reporting UIC must be the "AA" entity. For companies in a BN the reporting UIC is the BN UIC. Also verify the reporting date is correct.

Verifying Information (1) From the main menu key in "F" and press enter. (2) Type "1" and press enter. (3) Select update and press enter. (4) Type the class IX DODAAC and press enter. (5) Type the Commanders password and press enter. (6) The system will show Unit Parameter Update screen. (7) Select Unit parameter. (8) Verify data and ensure that BN indicator is set to "N"

End of Report Period Process (1) From the main menu select "N" and press enter. (2) Next select "2" and press enter. (3) The system will display the Send AMSS Transactions Higher screen. (4) Use the arrows keys and the spacebar to select the correct UIC(s). (5) The system will then display the device menu screen. (6) Select the right disk drive and press enter.

End of Report Period Process (Cont.) (7) The system displays a prompt informing you of the required number of diskettes. (8) Insert the first disk and press enter. when this is complete remove the diskette and label it with the unit's UIC, name, file name, and "Send To Higher".

Receive From Lower Process Units that have received information from lower must do this process (1) From the main menu select "N" and press enter. (2) Next select "3" and press enter. (3) The system will display the device menu. (4) Insert the first disk into the right drive.

Receive From Lower Process (Cont.) (5) Select the appropriate disk drive and press enter. (6) Repeat the process until all "Send to Higher" diskettes have been entered. This is to include the parent unit. For example, the company and the detachment(s).

Print “Roll-up By UIC” This process consolidates, by UIC, all reportable systems/subsystems and End Items that have accumulated an NMC time during the reporting period.

Print “Roll-up By UIC” (Cont.) (1) From the AMSS options menu key in "1" and press enter. (2) The system will display the AMSS Rollup By UIC screen with the prompt:   "Rollup By Reporting UIC (Y)es or (N)o." If Yes is selected, the report will consist of all reportable systems, subsystems and end items by EIC consolidated for the list shown.. If no is selected, the system will prepare individual unit reports for the selected UIC(s).

NOTE The companies that have rolled up detachments and need to "Send to Higher" to report to a battalion headquarters will perform the "Send To Higher" process again. Repeat the processes in step (b), (c), and (d) above. The remaining units proceed to step (l) "End Of Report Period" process.

Receive From Lower Level

Units that have received information from lower must do this process. (1) From the main menu select "N" and press enter. (2) Next select "3" and press enter. (3) The system will display the device menu. (4) Insert the first disk into the right drive. (5) Select the appropriate disk drive and press enter. (6) Repeat the process until all Send to Higher diskettes have been entered. This is to include the parent unit. For example, the company and the detachment(s).

Print “Roll-Up By UIC” This process consolidates, by UIC, all reportable systems/subsystems and End Items that have accumulated an NMC time during the reporting period.

Print “Roll-Up By UIC” (Cont.) (1) From the AMSS options menu key in "1" and press enter. (2) The system will display the AMSS Rollup By UIC screen with the prompt:   "Rollup By Reporting UIC (Y)es or (N)o." If Yes is selected, the report will consist of all reportable systems, subsystems and end items by EIC consolidated for the list shown.. If no is selected, the system will prepare individual unit reports for the selected UIC(s).

NOTE Two (2) copies of the AMSS report "ROLL-UP BY UIC" will be forwarded; one to each Bn or Separate (AA) unit’s supply sergeant, one to the O-6 level command S-4 section.

End of Report Period This process may be executed on or after the 16th of the month. It will save the appropriate data files from which the Materiel Status Report transaction files will be created. The process will also prepare the appropriate files for time accumulation for the next reporting period and usage data. Finally, the process will place the current period end date in the transfer data field in each record.

(1)  From the AMSS options menu key in "6" and press enter (2) The system will display the "Create AMSS Transaction To SAMS" Options menu. (3) Select "Send AMSS Transactions to SAMS" via Diskette. (4) The system will display a warning  screen. Six conditions are listed to indicate actions that must be taken prior to running the process. Ensure you have 2 blank formatted floppy diskettes "3.5 inch 1.44m" Statements also included indicating the end of the current reporting period and that the AMSS report date will be set the the next reporting period. Below the warning screen is the prompt: "Do You Wish To Continue (Y/N)"

(5) Key in "Y" and press enter. (6) The system begins the process and when complete displays the device menu screen. (7) Insert the first diskette into the drive. (8) Choose the right disk drive and press enter. (9) The system will prompt you to remove the first diskette and press enter. Do so. (10) The printer will print out the AMSS and Usage data copied from the diskette. (11) The system will prompt you to insert the next diskette. Do so. (12) The system will prompt you to remove the diskette and press enter. Again do it. (13) The printer will print a DA form 2715 Feeder Report. (14) The system returns to the Create AMSS Transactions To SAMS options menu.

End of Report Period (Cont.) Disk one (1) produced during the "End Of Report Period" Process is the file named AWAME130.dat and will be sent directly to the SSMO via blast. The second disk is to be used by ULLS-S4, currently fielded. Send this disk to the CO/BN S-4 for input into the ULSS-S4. NOTE: Always refer to the EUM for further clarification on any process.

Print/Display NMC Listing (1) From the ULLS-G main menu screen key in "k" and press enter. (2) From the Equipment Data reports menu key in "6" and press enter. (3) The system will display the NonMission Capable Equipment menu. (4) Print by DODAAC. Key in "2" and press enter.

Print/Display NMC Listing (Cont.) (5) The system will display the NonMission Capable Equipment screen. (6) Key in the DODAAC and press enter or press enter for the logon DODAAC. (7) The system will produce the printout and return to the NonMission Capable Equipment screen.

Roll-Up By Supporting UIC SOURCE: process.  FREQUENCY: SOP. PURPOSE:

Display/Print

Reports

Review weekly or IAW local Provides a rollup of Not Mission Capable time for all systems and end

reportable items. DISPOSITION: Keeping

AMSS

Dispose of IAW local SOP or the Modern Army Record System (MARKS). 

MANAGEMENT APPLICATIONS: This report shows readiness data for al systems and reportable end items. It can be run anytime during the reporting period. Report can be for a unit or a rollup by reporting battalion/brigade. ARMY MATERIEL STATUS SYSTEM (AMSS) ROLLUP BY REPORTING UIC REPORT PERIOD:

19970716 ‑ 19970815

DATE RANGE:

19970716‑ 19970815

REPORT DATE/TIME:

19970816 ‑ 09:52:05

UIC:

W33UIC

UNIT NAME & LOCATION:

D TROOP, 6TH CBAC FT HOOD TX 76544

    NOMENCLATURE

EIC

WPN AUTH O/HPOSS AVAIL ‑‑‑ ORG ‑‑‑ ‑‑‑ SPT ‑‑‑NMCD NMCE FMC% NMC% EIC HRS/DAYSHRS/DAYS NMCS NMCM NMCS NMCM --------------------------------------------------------------------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑-‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑----------------‑‑‑‑‑‑‑ TRK UTIL .75T BEB 11 30 30 100 ‑‑‑ QUANTITY ON HAND IS ZERO FOR EIC CEC LOADER SCOOP

GG

01

30 30

TANK CBT FT

AAB

44

120116 2

CARRIER, MTR   TANK/PUMP UNIT

ER

11

30 22

7

ZBE

21

30 28

1

100

---

12

88.3

11.7

1

73.3

26.7

93.3

6.7

1

Roll-Up By End Item Code SOURCE: Display/Print AMSS Reports process.  FREQUENCY: Review weekly or IAW local SOP. PURPOSE: Provides by UIC, a consolidated report by EIC sequence, of all reportable systems/subsystems and end items that have accumulated any NMC time during the reporting period. DISPOSITION: Dispose of when no longer needed or IAW local SOP.

MANAGEMENT APPLICATIONS: Provides readiness data for all systems/subsystems and end items. - Run anytime during the report period. - Available by Unit or rollup by reporting Bn/Bde. - Use to identify NMC subsystem of a reportable system and reason for NMC status. ARMY MATERIEL STATUS SYSTEM (AMSS) ROLLUP BY REPORTING EIC   REPORT PERIOD:

19970716 ‑ 19970815

DATE RANGE:

19970716 ‑ 19970815

REPORT DATE/TIME:

19970816 ‑ 09:53:11

UIC:

W33UIC

UNIT NAME & LOCATION:

D TROOP, 6TH CBAC FT HOOD TX 76544

  EIC HRS/DAYS HRS/DAYS NMCS NMCM NMCS NMCM --------------------------------------------------------------------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑---------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ TRK UTIL .75T BEB 1 1 31 31 100 ‑‑‑   TANK CBT FT AAB AAB 4 4 124 110 2 88.7 11.3 RADIO

SET

GAE

AAB

4

3

93

93 100

RADIO

SET

GCG AER

1

1

12

31

‑‑‑ 22

71.0

8 29.0

1

Organizational Class XI Failure Data By Admin Number SOURCE: FREQUENCY: PURPOSE:

Display/Print AMSS Reports process. Review weekly or IAW local SOP. Provides a recapitulation of all reportable systems or subsystems with accumulated Non-Mission Capable Supply (NMCS) time and the parts information causing the system or subsystem to be NMC. DISPOSITION: Dispose of when no longer needed or IAW local SOP.

MANAGEMENT APPLICATIONS: This report shows the NMC time for each system or subsystem by Admin Number. It shows the equipment model and parts on order, with the NMCS and NMCM time in days or hours. ARMY MATERIEL STATUS SYSTEM (AMSS)   ORGANIZATIONAL CLASS IX FAILURE DATA BY ADMIN NUMBER REPORT PERIOD:

19970716 ‑ 19970815

DATE RANGE:

19970716 ‑ 19970815

REPORT DATE/TIME:

19970816‑ 09:30:57

UIC:

W33U1C

UNIT NAME & LOCATION:D TROOP, 6TH CBAC FT HOOD TX 76544 ORG EST. ADMIN EQUIP NMCS NMCM NMC PARTS QTY QTY SHIP NUMBER MODEL HRS/DAYS HRS/DAYS NOUN D/I RECVD DATE DOCUMENT NO. NIIN PART NO. ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑-----------------------------------------------------------------------------------‑ D10 M3 15 0 LATCH,THUM 00001 00000 ‑‑‑‑‑ W45U7D72130026 000918742 D12 D30

M3NO NMC PARTS ON ORDER M3NO NMC PARTS ON ORDER

D31

M3

0

27

CLAMP,LOOP

00003

00000

‑‑‑‑‑

W45U7D72070025 000509077

Non-Mission Capable Report SOURCE: Materiel Readiness Processes, Display/Print AMSS Reports. FREQUENCY: Review Daily or IAW local SOP. PURPOSE: Provides a recapitulation of all reportable systems and subsystems by Admin Number. DISPOSITION: Dispose of IAW local SOP.

MANAGEMENT APPLICATIONS: ‑ This report shows by Admin Number the total NMC time accumulated for a reportable system or the subsystem configured to it. ‑ The printout lists the subsystems by Admin Numbers and the NMC time in percentages for the different NMC categories. ‑ The printout will show the UIC and date range, which is the beginning of the current report period until the day the report is executed. ARMY MATERIEL STATUS SYSTEM (AMSS) NON MISSION CAPABLE REPORT

  REPORT PERIOD:

19970716 ‑ 19970815

DATE RANGE:

19970716 ‑ 19970815

REPORT DATE/TIME:

19970815 ‑ 09:55:07

UIC:

W33U1C

UNIT NAME & LOCATION:

D TROOP, 6TH CBAC FT HOOD TX 76544

ADMIN EIC MODEL WPN FMC% NMC% ORG SPT NO EIC NMCS% NMCM% NMCS% NMCM%NMCD% NMCE% --------------------------------------------------------------------------------------------------------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ D1 BBG M1026WW 58.1 41.9 25.8 16.1 D10

APB

M3

APB

51.7

48.3

D12

APB

M3

APB

48.4

51.6

D13S

4TE

M242

45.2

54.8

48.3 51.6 25.8

29.0

System Status Summery SOURCE: Materiel Readiness Processes, Display/Print AMSS Reports. FREQUENCY: Review weekly or IAW local SOP. PURPOSE: Provides a rollup of all reportable equipment by weapon system EIC. DISPOSITION: Dispose of IAW local SOP.

MANAGEMENT APPLICATIONS: ‑ This report explains NMC time by equipment/nomenclature and model and is keyed by date range, and UIC and equipment with the authorized and on‑hand quantities given. The FMC/NMC percentages by level are also given on this report. ARMY MATERIEL STATUS SYSTEM (AMSS)

  SYSTEM STATUS SUMMARY   REPORT PERIOD:   DATE RANGE:   REPORT DATE/TIME:   UIC:   UNIT NAME & LOCATION:

19970716 ‑ 19970815 19970716 ‑ 19970815 19970815 ‑ 09:32:33 W33U1C D TROOP, 6TH CBAC FT HOOD TX 76544

NOUN MODEL AUTH O/H FMC% NMCS% NMCM% NMCE% NMCD% --------------------------------------------------------------------------------------------------------------------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ QUANTITY ON HAND IS ZERO FOR EIC 4TE TRK UTL ARMT CARR

M1026WW 2

2

79.1

12.9

8.0

‑‑‑

‑‑‑

TRK CGO 2.5T 6X6 WE

M35A2

1

1

71.0

‑‑‑

29.0

‑‑‑

‑‑‑

1

100

TRK UTIL .75T

M1009

1

‑‑‑

‑‑‑

‑‑‑

‑‑‑

Equipment Exception Report SOURCE: Materiel Readiness Processes, Display/Print AMSS Reports. FREQUENCY: Review daily or IAW local SOP. PURPOSE: Provides a listing of all reportable systems or subsystems by Admin Number that do not meet the DA goal of 90%. DISPOSITION: Dispose of IAW local SOP

MANAGEMENT APPLICATIONS: ‑ This report shows the reportable systems by Admin Number that do not meet the Department of the Army overall FMC readiness goals. If a reportable system has a FMC rate that is 90% or below, it will be displayed or printed on this report. ‑ Identifies part required if reason for NMC status is supply. ARMY MATERIEL STATUS SYSTEM (AMSS)

 

EQUIPMENT EXCEPTION REPORT   REPORT PERIOD: 19970716 ‑ 19970815   DATE RANGE: 19970716 ‑ 19970815   REPORT DATE/TIME: 19970815 ‑ 09:33:07   UIC: W33U1C   UNIT NAME & LOCATION: D TROOP, 6TH CBAC FT HOOD TX 76544   ADMIN ‑‑- ORG ‑‑‑ ‑‑‑ SPT ‑‑‑ NOUN NO. FMC%NMCS% NMCM%NMCS% NMCM% NMCD% ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑---------------------------------------------------------------------------------------------------------------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ TANK CBT D41 64.6 35.4

SUBSYSTEM/END ITEM FAILURE DATA ‑ HRS/DAYS ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑--------------------------------------------------------------------------------------------------------------------------------------------------------‑‑ ADMIN ‑‑ ORG ‑ ‑-‑ SPT ‑‑ NO. NMCS NMCM NMCS NMCM NMCD NMCE NIIN PNO ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑--------------------------------------------------------------------------------------------------------------------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ D41 11 NO PARTS ON ORDER D41S2 NO PARTS ON ORDER

NMCE%

NOMEN

Projected Fully Mission Capable Rates By Reportable End Item/System SOURCE: Materiel Readiness Processes, Display/Print AMSS Reports.  FREQUENCY: Review daily or IAW local SOP.  PURPOSE: Provides information to determine what equipment could possibly meet the DA goal of 90% based on current FMC/NMC equipment status.  DISPOSITION: Dispose of IAW local SOP.

MANAGEMENT APPLICATIONS: ‑ This report displays the projected FMC percent and the NMC hours/days to the DA goal of 90%. ‑ The projections are based on the current NMC status of the equipment and the concept that "if nothing changes between now and the end of the report period", this is what the result will be. ‑ A negative number in the last column indicates number of days short of goal. ARMY MATERIEL STATUS SYSTEM (AMSS) PROJECTED FULLY MISSION CAPABLE RATES BY REPORTABLE END ITEM/SYSTEM

  REPORT PERIOD: 19970716 ‑ 19970815   DATE RANGE: 19970716 ‑ 19970815   REPORT DATE/TIME: 19970815 ‑ 09:33:07   UIC: W33U1C   UNIT NAME & LOCATION: D TROOP, 6TH CBAC FT HOOD TX 76544   NOMENCLATURE QUANTITY ON HAND IS   TRK UTL ARMT CARR   TRK UTIL .75T   TRK CGO 2.5T 6X6 WE

EIC

MODEL

WPN EIC

AUTH

O/H POSS DAYS

PROJECTED AVAIL DAYS

PROJECTED NMC DAYS

ACCRUED NMC DAYS

PROJECTED NMC DAYS FMC TO PERCENT DA GOAL

ZERO FOR EIC BBG

M1026WW

2

2

62

48

1

13

77.4

‑7

BEB

M1009

1

1

31

31

0

0

100

0

BMA

M35A2

1

1

31

22

0

9

71.0

‑5

Rollup By System/Subsystem Admin Number SOURCE:

Materiel Readiness Processes, Display/Print AMSS

Reports.  FREQUENCY: Review daily or IAW local SOP.  PURPOSE: Identifies equipment usage and readiness by system/subsystem to date for the report period.  DISPOSITION: Dispose of IAW local SOP.

MANAGEMENT APPLICATIONS: ‑ This report provides the total Fully Mission Capable and Non‑Mission Capable time accumulated for a reportable system or subsystem by Admin Number. ‑ The data portrayed includes nomenclature, model, quantity authorized, quantity on‑hand, accumulated FMC and NMC time total by level and expressed in hours or days, type usage, usage totals and ARMY MATERIAL STATUS SYSTEM (AMSS) current FMC status. ROLLUP BY SYSTEM/SUBSYSTEM ADMIN NUMBER (UNIT)   REPORT PERIOD:

19970716 ‑ 19970815

DATE RANGE:

19970716 ‑ 19970815

REPORT DATE/TIME:

19970815 ‑ 09:34:03

UNIT NAME & LOCATION:

D TROOP, 6TH CBAC FT HOOD, TX 76554 SYSTEM/ SUBSYSTEM

POSS AVAIL NMCS NMCM NMCS NMCM NMCD NMCE TYPE FMC ADMIN # MODEL SERIAL NUMBER HRS/DAYS HRS/DAYS ORG ORG SPT SPT USAGE Y/N USAGE Y/N ------------------------------------------------------------------------------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ D1 M1026WW019859 31 18 8 5 ‑‑‑‑‑ ‑‑‑‑‑ ‑‑‑‑‑ ‑‑‑‑‑ M 026154 N D10

M3 N

3AC52020

31

16

15

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

M

007957

D11

M3 Y

3AC53030

31

31

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

M

017000

ANVRC64 RT0853 Y

31

31

‑‑‑‑‑

‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

M3 N

31

15

‑‑‑‑‑

‑‑‑‑‑

‑‑‑‑‑

16

‑‑‑‑‑

‑‑‑‑‑

  D11C D12

3AC54242

000000 M

005993

USAGE

DA Form 2715 Summary Report SOURCE: Materiel Status Processes, DA Form 2715 Feeder Reports.  FREQUENCY: Review weekly.  PURPOSE: Provides the FMC data by percentage for on‑hand equipment, pacing items and cumulative FMC Readiness (R) Level Range.  DISPOSITION: Dispose IAW local SOP.

MANAGEMENT APPLICATIONS: ‑ Run anytime time during report period. ‑ Use to determine R‑Rating. ‑ R‑Rating is based on the date/range run and is not projected.

ARMY MATERIEL STATUS SYSTEM (AMSS) BATTALION AMSS FEEDER DATA TO DA FORM 2715 ALL REPORTABLE ITEMS, IN‑LIEU‑OF, SUBSTITUTES, AND EXEMPT ITEMS THAT ARE MEASURED IN DAYS REPORT

PERIOD:

19970716 ‑ 19970815 DATE

RANGE:

19970716 ‑ 19970815 REPORT

DATE/TIME:

1 19970805 ‑ 09:34:49 UIC: W33UAA UNIT D TROOP, 6TH CBAC

NAME

&

LOCATION:

DA Form 2715 Feeder Reports Detail Report (LIN Sequence) SOURCE: Materiel Status Processes; DA Form 2715 Feeder Reports. FREQUENCY: Review Weekly.  PURPOSE: Provides DA Form 2715 Feeder data at any time during report period for reportable systems/subsystems and end items.  DISPOSITION: Dispose IAW local SOP.

MANAGEMENT APPLICATIONS: ‑ Use to identify systemic maintenance issues for specific types of equipment. ‑ Use to prepare End of Reporting Period USR Data. ARMY MATERIEL STATUS SYSTEM (AMSS) BATTALION AMSS FEEDER DATA TO DA FORM 2715 ALL REPORTABLE ITEMS, PACING ITEMS, IN‑LIEU‑OF, SUBSTITUTES, AND EXEMPT ITEMS IN LIN SEQUENCE REPORT PERIOD:

19970716 ‑ 19970815

DATE RANGE: 19970716 ‑ 19970815 REPORT DATE/TIME: UIC:

19970815 ‑ 09:35:16

W33UIC

UNIT NAME & LOCATION: D TROOP, 6TH CBAC FT HOOD, TX 76554 AUTH SEQ LIN LIN LIN R LEVEL NUMBER NUMBER NUMBER ERC NAME O/H FMC% NMCS% NMCM% RANGE% -------------------------------------------------------------------------------------------------------------------------‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ 1 C18234 A CARRIER PERSONNEL 1 32 68 0 BELOW 59 2

C76335

P

FIGHTING VEH CAV

15

67

11

22

60 ‑ 69

3

D10741

A

CARRIER, MTR, SP

1

100

0

0

90 ‑ 100

4

J43918

B

GEN ST GAS ENG 1.5KW

1

100

0

0

90 ‑ 100

AMSS Authorization Report SOURCE: Option FREQUENCY: PURPOSE: in the by UIC.  DISPOSITION:

Update

AMSS

Authorizations

Run Monthly Provides a listing of all records AMSS Authorization File Dispose IAW Local SOP.

MANAGEMENT APPLICATIONS: ‑ Use to verify unit MTOE authorizations. ‑ Validate authorizations with EDF. ARMY MATERIEL STATUS SYSTEM (AMSS) AUTHORIZATION REPORT REPORT DATE UIC:

19970815

W33U1C

UNIT NAME/LOCATION: D TROOP, 6TH CBAC FT HOOD TX 76544 WPN EIC MODEL QUANTITY QUANTITY QUANTITY QUANTITY EIC AUTHORIZED REQUIRED ON‑HAND SHORT -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------BBG M1026WW 2 2 2 0 BEB M1009 1 1 1 0 BMA M35A2 1 1 1 0 BMB M35A2WW 1 1 1 0 BRT M925WW 1 1 1 0 BRY M923 2 2 2 0 BTF M936WW 1 1 1 0 CEC M105A2 1 1 1 0 VGJ MEP015A 2 2 2 0 VHA MEP025A 1 1 1 0 VHB MEP026A 1 1 1 0 AAB 4BB M2 4 4 4 0

AAB

4BD

M240

8

8

8

0

QUESTIONS?