Ad 0375b Bios Setup Vl400

KMSS AD-0375-B / 22-Jan-03

PhoenixBIOS Setup for HP Vectra VL400 (D9824A/ #G24) (P4359A/ #G03) BIOS Version IP.01.04US BIOS Version IP.01.07US

Department/Author:

Approved by:

Ketil O. Paulsen (s)

Morten Hasås (s)

 2009 KONGSBERG MARITIME SHIP SYSTEMS AS All rights reserved No part of this work covered by the copyright hereon may be reproduced or otherwise copied without prior permission from

HP Vectra VL400 BIOS Setup

KMSS AD-0375-B / 22-Jan-03 KONGSBERG MARITIME SHIP SYSTEMS AS

HP Vectra VL400 BIOS Setup

KMSS AD-0375-B / 22-Jan-03

DOCUMENT STATUS Issue No. A B

Date/Year 8-Aug-01 22-Jan-03

Inc. by KOP KOP

Issue No.

Date/Year

Inc. by

CHANGES IN DOCUMENT Issue No. A B

ECO No.

Paragraph No.

ADE-000093

HP Vectra VL400 BIOS Setup

Paragraph Heading/ Description of Change First issue Document changed to include set-up for VL400 - 1GHz PC

KMSS AD-0375-B / 22-Jan-03

HP Vectra VL400 BIOS Setup

KMSS AD-0375-B / 22-Jan-03

TABLE OF CONTENTS Section

Page

1. STANDARD PHOENIX BIOS SETUP.................1 1.1 Main..................................................................... ..1 1.1.1 VL400 733MHz...................................................................1 1.1.2 VL400 1GHz........................................................................1

1.2 Advanced............................................ ...................2 1.2.1 1.2.2 1.2.3 1.2.4 1.2.5 1.2.6 1.2.7 1.2.8

Advanced Advanced Advanced Advanced Advanced Advanced Advanced Advanced

-Cache Options...................................................2 -Flexible Disk Drivers.........................................3 -IDE Devices......................................................3 -Video Options...................................................4 -Integrated I/O Ports........................................4 -PCI Configuration.............................................5 -ISA Resource Exclusion....................................5 -CPU Microcode Update......................................6

1.3 Security............................... ..................................6 1.3.1 Security -User and Administrator Passwords.....................7 1.3.2 Security -Hardware protection...........................................7 1.3.3 Security -Boot Devices Security.........................................8

1.4 Boot.......................................................... .............8 1.4.1 Boot- Boot Device Priority..................................................9 1.4.2 Boot- Hard Disk Drives.......................................................9 1.4.3 Boot -Removable Devices.................................................10

1.5 Power.................................. ................................10

2. SPECIAL PHOENIX BIOS SETUPS.................11 2.1 COM2 – How to set up..........................................11 2.1.1 Advanced..........................................................................12 2.1.2 Advanced -Integrated I/O Ports......................................13 2.1.3 Advanced -ISA Resource Exclusion..................................13

HP Vectra VL400 BIOS Setup

i

KMSS AD-0375-B / 22-Jan-03

1.

STANDARD PHOENIX BIOS SETUP

The following BIOS settings will be implemented after running DC C20 Disk Image. Deviations from this Image may occur, see section 2 of this document.

1.1

Main

1.1.1

VL400 733MHz

Main

Advanced

Date (mm:dd:yy) Time (hh:mm:ss) BIOS Version

PhoenixBIOS Setup Utility Security Boot Power [12/11/2000] [16:40:46]

Item Specific Help Changes the day, month and year

IP.01.04US

>Keyboard Features

, <Shift-Tab>, or <Enter> selects field.

CPU Type CPU Speed

Pentium(R) III 733 MHz

Cache RAM Base Memory Extended Memory

256 KB 640 KB 129024 KB

+/Esc

Change Values Exit

1.1.2

Exit

Enter

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

VL400 1GHz

Date (mm:dd:yy) Time (hh:mm:ss)

[12/11/2000] [16:40:46]

BIOS Version

IP.01.07US

>Keyboard Features

Item Specific Help Changes the day, month and year , <Shift-Tab>, or <Enter> selects field.

CPU Type CPU Speed

Pentium(R) III 1000 MHz

Cache RAM Base Memory Extended Memory

256 KB 640 KB 129024 KB

HP Vectra VL400 BIOS Setup

1

KMSS AD-0375-B / 22-Jan-03

1.2

Advanced

Main

Advanced

Plug & Play O/S Reset Configuration Data Memory Hole At l5M-16M Processor Serial Number USB Legacy Mode Integrated USB Interface Integrated Network Interface Integrated Audio Interface

PhoenixBIOS Setup Utility Security Boot Power [No] [No] [Disabled] [Disabled] [Disabled] [Disabled/PnP OS] [Enabled] [Disabled]

Item Specific Help Select 'Yes' if you are using Plug & Play capable operating system. Select 'No' if you need the BIOS to configure non-boot devices

> Cache Options > Flexible Disk Drives > IDE Devices > Video Options > Integrated 1/0 Ports > PCI Configuration > ISA Resource Exclusion > CPU Microcode Update

+/Esc

Change Values Exit

1.2.1

Enter

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

Advanced -Cache Options PhoenixBIOS Setup Utility Advanced Cache Options

Processor Memory Cache

+/Esc

Exit

Item Specific Help

[Enabled]

Change Values Exit

HP Vectra VL400 BIOS Setup

Enter

Sets the state of the processor memory cache to 'Disabled' to slow down the performance of the machine for legacy applications.

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

2

KMSS AD-0375-B / 22-Jan-03 1.2.2

Advanced -Flexible Disk Drivers PhoenixBIOS Setup Utility Advanced Flexible Disk Drives

Item Specific Help

To enable/disable the floppy disk controller, go into the Hardware protection page Base I/O address Legacy Diskette A

+/Esc

[Primary] [1.44/1.25 MB 3 "]

Change Values Exit

1.2.3

Set the base I/O address for the floppy disk controller

Enter

Select

> Sub-Menu

Advanced -IDE Devices PhoenixBIOS Setup Utility Advanced IDE Devices

Item Specific Help

To enable/disable the integrated IDE controllers, go into the Hardware protection page > Primary Master > Primary Slave > Secondary Master > Secondary Slave Large Disk Access Mode

+/Esc

F9 Setup Default F10 Save and Exit

[10110MB] [None] [CD-ROM] [None] [DOS]

Change Values Exit

HP Vectra VL400 BIOS Setup

Enter

Press Enter w hen selected to go into the associated Sub-Menu. [20404MB] for 1 GHz PC

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

3

KMSS AD-0375-B / 22-Jan-03 1.2.4

Advanced -Video Options PhoenixBIOS Setup Utility Advanced

Video Options Video Primary Controller Multi-Display

Item Specific Help [PCI] [Disabled]

Select 'PCI' to have a ‘PCI video card, if installed, used for the boot display device. Select 'AGP or Embedded Video' to have a AGP video card, if installed, or the embedded video used for the boot display device.

+/Esc

Change Values Exit

1.2.5

+/Esc

Select

> Sub-Menu

Advanced -Integrated I/O Ports PhoenixBIOS Setup Utility Advanced

Integrated Serial port A Serial port B Parallel port Mode

Enter

F9 Setup Default F10 Save and Exit

I/O Ports

Item Specific Help

[Auto] [Disabled] [Auto] [EPP]

Change Values Exit

HP Vectra VL400 BIOS Setup

‘Disabled ' : No Configuration done by BIOS, but Configuration can be chosen by OS 'Manual' : User Configuration 'Auto' : BIOS or OS chooses configuration

Enter

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

4

KMSS AD-0375-B / 22-Jan-03 1.2.6

Advanced -PCI Configuration PhoenixBIOS Setup Utility Advanced PCI Configuration

Item Specific Help

> PCI Device, Slot #1 > PCI Device, Slot #2 > PCI Device, Slot #3

+/Esc

Setup items for configuring the specific PCI device

Change Values Exit

1.2.7

Enter

Select

> Sub-Menu

Advanced -ISA Resource Exclusion PhoenixBIOS Setup Utility Advanced

ISA Resource Exclusion

Item Specific Help

IRQ 3 assigned to IRQ 4 assigned to IRQ 5 assigned to IRQ 7 assigned to IRQ 9 assigned to IRQ 10 assigned to IRQ 11 assigned to

[PCI/ISA PnP] [Legacy ISA] [Legacy ISA] [PCI/ISA PnP] [PCI/ISA PnP] [PCI/ISA PnP] [PCI/ISA PnP]

CC00 –CFFF assigned to D000 -D3FF assigned to D400 -D7FF assigned to D800 –DBFF assigned to DC00 –DFFF assigned to

[PCI/ISA PnP] [PCI/ISA PnP] [PCI/ISA PnP] [Legacy ISA] [PCI/ISA PnP]

+/Esc

F9 Setup Default F10 Save and Exit

Change Values Exit

HP Vectra VL400 BIOS Setup

Enter

Reserves the specified IRQ for use by legacy ISA devices

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

5

KMSS AD-0375-B / 22-Jan-03 1.2.8

Advanced -CPU Microcode Update PhoenixBIOS Setup Utility Advanced CPU

Microcode Update

Item Specific Help

CPU ID and

Microcode Revision of Installed CPU:

CPU #1 Supported CPU

686/8 Microcode Updates:

Slot #1 Slot #2 Slot #3 Slot #4 Slot #5 Slot #6 Slot #7 Slot #8

+/Esc

<EMPTY> 632/20 633/34 634/35 665/3 681/11 683/10 686/8

Change Values Exit

1.3

Security

Main

Advanced

> User and Administrator > Hardware protection > Boot Devices Security

+/Esc

All items on this menu cannot be modified in user mode. If any items require changes, please consult your system Supervisor.

Enter

Select

> Sub-Menu

PhoenixBIOS Setup Utility Security Boot Power Passwords

Change Values Exit

HP Vectra VL400 BIOS Setup

F9 Setup Default F10 Save and Exit

Exit Item Specific Help

Press Enter when selected to go into the associated Sub-Menu

Enter

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

6

KMSS AD-0375-B / 22-Jan-03 1.3.1

Security -User and Administrator Passwords PhoenixBIOS Setup Utility Security User and Administrator

Passwords

Item Specific Help

User Password can be Set User Password

Not Set [Press Enter]

This password prevents Set Administrator Password

Not Set [Press Enter]

Autosoft Lock Power-On Password

[None] [None]

Minimum Admin Password Length Minimum User Password Length

[None] [None]

+/Esc

Change Values Exit

1.3.2

Enter

The password prevents unauthorized access to the BIOS setup. It can also be used to start the computer. Typing will also lock the system.

Select

> Sub-Menu

Security -Hardware protection PhoenixBIOS Setup Utility Security Hardware protection

Item Specific Help

Flexible Disks

[Enabled]

Integrated IDE Controllers Hard Disks / CD-ROM Hard Disk Boot Sector

[Enabled] [Unlocked]

Integrated I/O Ports Serial Port A Serial Port B Parallel Port

[Enabled] [Enabled] [Enabled]

+/Esc

F9 Setup Default F10 Save and Exit

Change Values Exit

HP Vectra VL400 BIOS Setup

Enter

Select 'Write Protection' to prevent users from copying confidential information to a diskette. Select 'Disabled' to protect your flexible disks from use.

Select

> Sub-Menu

F9 Setup Default Fl0 Save and Exit

7

KMSS AD-0375-B / 22-Jan-03 1.3.3

Security -Boot Devices Security PhoenixBIOS Setup Utility Security Boot Device Security

Start from Network Start from Floppy Start from IDE CD-ROM Start from IDE HDD

+/Esc

1.4 Main

Item Specific Help [Enabled] [Enabled] [Enabled] [Enabled]

Change Values Exit

Enter

Select 'Disabled' to prevent unauthorized use of the network to start the computer.

Select

> Sub-Menu

F9 Setup Default Fl0 Save and Exit

Boot Advanced

PhoenixBIOS Setup Utility Security Boot Power

Exit Item Specific Help

QuickBoot Mode Boot-time Diagnostic Screen

[Enabled] [Disabled] Allows the system to skip certain tests while booting. This will decrease; the time needed to boot the system.

> Boot Device priority > Hard Disk Drives > Removable Devices

+/Esc

Change Values Exit

HP Vectra VL400 BIOS Setup

Enter

Select

> Sub-Menu

F9 Setup Default Fl0 Save and Exit

8

KMSS AD-0375-B / 22-Jan-03 1.4.1

Boot- Boot Device Priority PhoenixBIOS Setup Utility Boot Boot Device Priority

Item Specific Help

l. [Removable Devices] 2. [ATAPI CD-ROM Drive] 3. [Hard Drive] 4. [Legacy Network Cards]

+/Esc

Change Values Exit

1.4.2

Use < > or < > to select a device, then press <+> to move it up the list, or <-> to move it down the list. Press <Esc> to exit this menu.

Enter

Select

> Sub-Menu

Boot- Hard Disk Drives PhoenixBIOS Setup Utility Boot Hard Disk Drives

l. [Maxtor 31024H1-(PM)] 2. [Bootable Add-in Cards]

+/Esc

F9 Setup Default Fl0 Save and Exit

Change Values Exit

HP Vectra VL400 BIOS Setup

Item Specific Help ([ST320410A-(PM)] for 1GHz PC)

Enter

Select

Use < > or < > to select a device, then press <+> to move it up the list, or <-> to move it down the list. Press <Esc> to exit this menu.

> Sub-Menu

F9 Setup Default Fl0 Save and Exit

9

KMSS AD-0375-B / 22-Jan-03 1.4.3

Boot -Removable Devices PhoenixBIOS Setup Utility Boot Removable Devices

Item Specific Help

l. [Legacy Floppy Drives]

+/Esc

1.5 Main

Use < > or < > to select a device, then press <+> to move it up the list, or <-> to move it down the list. Press <Esc> to exit this menu.

Change Values Exit

Enter

Select

> Sub-Menu

F9 Setup Default Fl0 Save and Exit

Power Advanced

PhoenixBIOS Setup Utility Security Boot Power

Exit Item Specific Help

State After Power Failure

[Auto]

Advanced Power Management Auto Suspend Timeout Suspend Wakeup on Modem Ring IRQ PCI Bus Activity Power-up on PCI Bus Activity

(APM) Mode [Disabled]

Advanced Configuration and (ACPI) Mode Suspend To RAM Wakeup on Modem Ring

Power Interface

+/Esc

The field lets you determine the state that your PC returns to after a power failure. If set to Off., the PC will not boot after a power failure. If set to Auto same power state as before power failure. If set to On, the PC will always boot after power failure.

[Enabled] [IRQ3 or IRQ4] [Enabled] [Disabled]

[Enabled] [Enabled]

Change Values Exit

HP Vectra VL400 BIOS Setup

Enter

Select

> Sub-Menu

F9 Setup Default Fl0 Save and Exit

10

KMSS AD-0375-B / 22-Jan-03

2.

SPECIAL PHOENIX BIOS SETUPS

2.1

COM2 – How to set up

Short sequential description: 1. After starting the PC, select START – SETTINS – CONTROL PANEL 2. Select Ports Icon

COM3:

3. 4. 5. 6. 7. 8. 9. 10.

Select COM3: and press the Delete button Shut down the PC Restart the PC, and select BIOS Setup during startup Alter the BIOS setup according the parameters listed in 2.1.1, 2.1.2 and 2.1.3 Save BIOS Setup After restarting the PC, select START – SETTINS – CONTROL PANEL Select Ports Icon Check that both the ports COM1: and COM2 are listed

COM2:

HP Vectra VL400 BIOS Setup

11

KMSS AD-0375-B / 22-Jan-03 2.1.1 Advanced Select the Reset Configuration Data option. By setting this item to “Yes”, the BIOS will be forced to perform again the resource allocation for all PnP and PCI devices on next boot. This can be used to solve any resource conflict in Windows. After reboot, this field comes automatically back to “No” Main

Advanced

Plug & Play O/S Reset Configuration Data Memory Hole At l5M-16M Processor Serial Number USB Legacy Mode Integrated USB Interface Integrated Network Interface Integrated Audio Interface

PhoenixBIOS Setup Utility Security Boot Power [No] [Yes] [Disabled] [Disabled] [Disabled] [Disabled/PnP OS] [Enabled] [Disabled]

Item Specific Help Select 'Yes' if you are using Plug & Play capable operating system. Select 'No' if you need the BIOS to configure non-boot devices

> Cache Options > Flexible Disk Drives > IDE Devices > Video Options > Integrated 1/0 Ports > PCI Configuration > ISA Resource Exclusion > CPU Microcode Update

+/Esc

Change Values Exit

HP Vectra VL400 BIOS Setup

Enter

Select

Exit

> Sub-Menu

F9 Setup Default F10 Save and Exit

12

KMSS AD-0375-B / 22-Jan-03 2.1.2 Advanced -Integrated I/O Ports Serial port B has to be enabled, and interrupts and Base I/O address configured manually. PhoenixBIOS Setup Utility Advanced Integrated Serial port A Base I/O address Interrupt Serial port B Base I/O address Interrupt Parallel port Mode

I/O Ports

Item Specific Help

[Manual] [3E8] [IRQ 3] [Manual] [2E8] [IRQ 4] [Auto] [EPP]

‘Disabled ' : No Configuration done by BIOS, but Configuration can be chosen by OS 'Manual' : User Configuration 'Auto' : BIOS or OS chooses configuration

+/Esc

Change Values Exit

Enter

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

2.1.3 Advanced -ISA Resource Exclusion IRQ 4 shall no longer be reserved for use by legacy ISA devices PhoenixBIOS Setup Utility Advanced ISA Resource Exclusion

Item Specific Help

IRQ 3 assigned to IRQ 4 assigned to IRQ 5 assigned to IRQ 7 assigned to IRQ 9 assigned to IRQ 10 assigned to IRQ 11 assigned to

[PCI/ISA PnP] [PCI/ISA PnP] [Legacy ISA] [PCI/ISA PnP] [PCI/ISA PnP] [PCI/ISA PnP] [PCI/ISA PnP]

CC00 –CFFF assigned to D000 -D3FF assigned to D400 -D7FF assigned to D800 –DBFF assigned to DC00 –DFFF assigned to

[PCI/ISA PnP] [PCI/ISA PnP] [PCI/ISA PnP] [Legacy ISA] [PCI/ISA PnP]

+/Esc

Change Values Exit

HP Vectra VL400 BIOS Setup

Enter

Reserves the specified IRQ for use by legacy ISA devices

Select

> Sub-Menu

F9 Setup Default F10 Save and Exit

13