78
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View 78 as PDF for free.
More details
- Words: 490
- Pages: 1
Palace Series Extrusions and Components NEW! • Replacement Items for Sliding Kits, or Purchase Individual Components to Fabricate Your Own Kits • Finishes to Match Our Stock Sized Kits • Send Us Your Drawing (With Dimensions) and Let U.S. Horizon Design and Quote a Custom Enclosure Kit for You!
AVAILABLE IN BRITE ANODIZED (BC), BRITE GOLD ANODIZED (BG), SATIN NICKEL (BRUSHED) (BN), AND OIL RUBBED BRONZE (OB)
Recommended Maximum Slider Sizes: 1/4" (6 mm) Glass: 60" W x 72" H or 72" W x 60" H; 3/8" (10 mm) Glass: 72" W x 80" H
Top Header Extrusion Acts as a Crown, and is Used in All Palace Series Applications
Header Filler is Used Where Fixed Panels Are Located
Product Code
Product Code
AH-P60
AI-P72
72" (1.83 m)
72" (1.83 m)
Product Code
Product Code
AH-P144
Top Hanger Assemblies Used in Palace Series Applications Top Hanger for 3/8" (10 mm) Glass Product Code
THD-P 3/8" (10 mm) Glass Product Code
AI-P144
144" (3.66 m)
THS-P
144" (3.66 m) Header
Sidelite Sill Used in Palace Series Applications Where Fixed Panel is Same Height as Doors
Header Filler
Bottom Sill Extrusion Used in All Palace Series Applications
Product Code
Product Code
Product Code
Product Code
ARS-P72
ARS-P144
ABS-P72
ABS-P144
72" (1.83 m)
144" (3.66 m)
72" (1.83 m)
144" (3.66 m)
Aluminum Wall Jamb
Top Hanger for 1/4" (6 mm) Glass
Bottom Sill and Wall Jamb Fillers • Bottom Sill Filler Can Be Cut at a Taper to Bring the Bottom Sill to a Level Position • Jamb Filler Can Be Cut at a Taper to Fill Vertical Gap When Glass Should Have Been Cut Out of Square But Was Not • Simply Field Fabricate as Desired
Bottom Sill
Sidelite Sill
Aluminum Wall Jamb
1/4" (6 mm) Glass
Polycarbonate Wall Jamb
L-Shaped Clear Polycarbonate Wall Jamb
T-Shaped Clear Polycarbonate Panel Jamb
Product Code
Product Code
PWJ-P98
PPJ-P98
98" (2.49 m)
98" (2.49 m)
Bottom Sill Filler Product Code ASF-P80
Wall Jamb Filler Product Code AJF-P72
80" (2.03 m)
72" (1.83 m)
Guide for Glass, Rollers Standard 24" TB-24SM Towel Bar and Back-to-Back Cushioned and Hardware Required Knob (See page 37 for Alternate for Palace Applications Towel Bar Sizes) Rollers 24" (610 mm) Towel Bar
Bottom Guide
Product Code
Product Code BG-P38 3/8" (10 mm) Glass
TB-24SM
Product Code BG-CH14 1/4" (6 mm) Glass
W A L L
Product Code
AWJ-P80 80" (2.03 m)
Polycarbonates adhere to glass or wall as shown using our Clear Two-Way Acrylic Tape (see page 85)
Product Code
AWJ-P144 144" (3.66 m)
Product Code SDR-P2 (2 per Pack)
Hardware Pack
Back-to-Back Cushioned Knob Product Code
KCBTB
Product Code Product Code Product Code Product Code
HB-P-BC HB-P-BG HB-P-BN HB-P-OB
Brite Anodized Brite Gold Anodized Satin Nickel (Brushed) Oil Rubbed Bronze
Note: Complete the above product codes by adding the desired finish code to the end.
78
ushorizon.com • Toll Free Phone (877) 728-3874 • Toll Free Fax (888) 440-9567
AVAILABLE IN BRITE ANODIZED (BC), BRITE GOLD ANODIZED (BG), SATIN NICKEL (BRUSHED) (BN), AND OIL RUBBED BRONZE (OB)
Recommended Maximum Slider Sizes: 1/4" (6 mm) Glass: 60" W x 72" H or 72" W x 60" H; 3/8" (10 mm) Glass: 72" W x 80" H
Top Header Extrusion Acts as a Crown, and is Used in All Palace Series Applications
Header Filler is Used Where Fixed Panels Are Located
Product Code
Product Code
AH-P60
AI-P72
72" (1.83 m)
72" (1.83 m)
Product Code
Product Code
AH-P144
Top Hanger Assemblies Used in Palace Series Applications Top Hanger for 3/8" (10 mm) Glass Product Code
THD-P 3/8" (10 mm) Glass Product Code
AI-P144
144" (3.66 m)
THS-P
144" (3.66 m) Header
Sidelite Sill Used in Palace Series Applications Where Fixed Panel is Same Height as Doors
Header Filler
Bottom Sill Extrusion Used in All Palace Series Applications
Product Code
Product Code
Product Code
Product Code
ARS-P72
ARS-P144
ABS-P72
ABS-P144
72" (1.83 m)
144" (3.66 m)
72" (1.83 m)
144" (3.66 m)
Aluminum Wall Jamb
Top Hanger for 1/4" (6 mm) Glass
Bottom Sill and Wall Jamb Fillers • Bottom Sill Filler Can Be Cut at a Taper to Bring the Bottom Sill to a Level Position • Jamb Filler Can Be Cut at a Taper to Fill Vertical Gap When Glass Should Have Been Cut Out of Square But Was Not • Simply Field Fabricate as Desired
Bottom Sill
Sidelite Sill
Aluminum Wall Jamb
1/4" (6 mm) Glass
Polycarbonate Wall Jamb
L-Shaped Clear Polycarbonate Wall Jamb
T-Shaped Clear Polycarbonate Panel Jamb
Product Code
Product Code
PWJ-P98
PPJ-P98
98" (2.49 m)
98" (2.49 m)
Bottom Sill Filler Product Code ASF-P80
Wall Jamb Filler Product Code AJF-P72
80" (2.03 m)
72" (1.83 m)
Guide for Glass, Rollers Standard 24" TB-24SM Towel Bar and Back-to-Back Cushioned and Hardware Required Knob (See page 37 for Alternate for Palace Applications Towel Bar Sizes) Rollers 24" (610 mm) Towel Bar
Bottom Guide
Product Code
Product Code BG-P38 3/8" (10 mm) Glass
TB-24SM
Product Code BG-CH14 1/4" (6 mm) Glass
W A L L
Product Code
AWJ-P80 80" (2.03 m)
Polycarbonates adhere to glass or wall as shown using our Clear Two-Way Acrylic Tape (see page 85)
Product Code
AWJ-P144 144" (3.66 m)
Product Code SDR-P2 (2 per Pack)
Hardware Pack
Back-to-Back Cushioned Knob Product Code
KCBTB
Product Code Product Code Product Code Product Code
HB-P-BC HB-P-BG HB-P-BN HB-P-OB
Brite Anodized Brite Gold Anodized Satin Nickel (Brushed) Oil Rubbed Bronze
Note: Complete the above product codes by adding the desired finish code to the end.
78
ushorizon.com • Toll Free Phone (877) 728-3874 • Toll Free Fax (888) 440-9567
