5 Run Scenario
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View 5 Run Scenario as PDF for free.
More details
- Words: 253
- Pages: 8
run the scenario _____________________________________________________________________________________ running a scenario : before running the scenario, let us check the settings. click hosts tab in the controller window. select hosts > details from the menubar. see the screen below.
1
run the scenario _____________________________________________________________________________________ click details button. host information window opens. select vuser limits tab and mark the rte check box. see the screen below
click ok.
2
run the scenario _____________________________________________________________________________________
select result > results settings from the menu bar as follows.
3
run the scenario _____________________________________________________________________________________ click the results settings button. the following window pops up. you can specify your choices for the results folder.
click ok.
4
run the scenario _____________________________________________________________________________________ now we are ready to start the scenario. select scenario > start
5
run the scenario _____________________________________________________________________________________ the vusers first get initialized, then they become ready, followed by this their state will change to run. the scenario will be over when they reach the passed state.
6
run the scenario _____________________________________________________________________________________ the output window at the bottom shows msgs, error etc. double click on any message to get the details.
7
run the scenario _____________________________________________________________________________________ while the scenario is on, you may click the online monitors tab in the controller window to monitor the scenario run. see the following screen.
more details on online monitors can be found in the manual controller user’s guide chapter 14 pages 153 and 154. important : please see “results directory file structure” in the manual controller user’s guide page 95.
*** end of the document ***
8
1
run the scenario _____________________________________________________________________________________ click details button. host information window opens. select vuser limits tab and mark the rte check box. see the screen below
click ok.
2
run the scenario _____________________________________________________________________________________
select result > results settings from the menu bar as follows.
3
run the scenario _____________________________________________________________________________________ click the results settings button. the following window pops up. you can specify your choices for the results folder.
click ok.
4
run the scenario _____________________________________________________________________________________ now we are ready to start the scenario. select scenario > start
5
run the scenario _____________________________________________________________________________________ the vusers first get initialized, then they become ready, followed by this their state will change to run. the scenario will be over when they reach the passed state.
6
run the scenario _____________________________________________________________________________________ the output window at the bottom shows msgs, error etc. double click on any message to get the details.
7
run the scenario _____________________________________________________________________________________ while the scenario is on, you may click the online monitors tab in the controller window to monitor the scenario run. see the following screen.
more details on online monitors can be found in the manual controller user’s guide chapter 14 pages 153 and 154. important : please see “results directory file structure” in the manual controller user’s guide page 95.
*** end of the document ***
8
Related Documents
5 Run Scenario
November 2019 15
Session 5 Scenario
June 2020 7
Scenario
October 2019 65
Scenario
October 2019 70
Scenario
May 2020 42