277791763-driver-display-volvo-truck_54-54.pdf

50

MENU 9: Vehicle Settings

9.2 Fleet Limits The ”Fleet Limits” menu has 3 sub-menus:

• • •

Engine speed (max)

Switch between the alternatives using ” /∇”. Confirm selection using ”SELECT”.

1

Road speed (max)

Press ”Esc” to return to the main menu.

Fuel (target)

9.2. 1 Fleet Limits: Engine speed (max) MENU: Vehicle Settings, Fleet Limits: Engine speed (max) This menu can only be accessed if the correct password has been entered. 1

Select ”Vehicle Settings”, ”Fleet Limits: Engine speed (max)” from the menu to set the engine speed limit.

2

Set the new engine speed limit using ” /∇” (enter one number at a time followed by ”SELECT”).

This setting can be used by the vehicle owner to set a maximum engine speed limit. If the engine speed exceeds the set limit, it is registered, see “12.3 Trip data” page 71 3

Vehicle Settings 1/2 Fleet Limits (engine speed)

1

Present Limit: Transfer An is complete.

Vehicle Settings 1/3 Fleet Limits (engine speed) Present Limit: 2000 rpm Set new value: 0 0 0 0 rpm

CC

7658.8 km

Press ”Esc” to exit and return to the previous menu. Press ”SELECT” when required engine speed limit (rpm) is displayed.

The display will indicate whether the transfer has been successful. Press ”Esc” to return to the previous menu.

CC 4

7658.8 km

The display will indicate if the transfer was not successful. See “Action required if an information transfer is not successful: ” page 48.