0 ( 6 6 $ * ( 6
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View 0 ( 6 6 $ * ( 6 as PDF for free.
More details
- Words: 7,308
- Pages: 63
CFT2200 User Guide
0 ( 6 6 $ * ( 6
0(18
6(/(&7
(17(5
92/80(
&+$11(/
&$87,21
REPAIRS If you find the unit in need of repair, contact your cable system operator for repair or replacement.
5,6.2)(/(&75,&6+2&.
NOTE TO CATV SYSTEM INSTALLER &$87,21 725('8&(7+(5,6.2)(/(&75,&6+2&. '21275(029(&29(5 25%$&. 1286(56(59,&($%/(3$576,16,'( 5()(56(59,&,1*7248$/,),('6(59,&(3(56211(/
Graphical symbols and supplemental warning marking locations on bottom of terminal.
WARNING
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close as possible to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING Elec tr ic ser vice G ro und equipm ent clam p
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
A ntenna le ad in w ire
CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
A ntenna discharge u nit (N E C S ection 810 -20 )
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This installation should be made by a qualified service person and should conform to all local codes.
G ro und in g c la mp s
G ro unding co nduc tor s (N EC Section 810-2 1)
Powe r se rvice g rounding electro de sy stem (N EC A rtic le 2 50, Par t H ) N EC =N AT IO N A L EL EC T RIC A L C O D E
Copyright © 1999 by General Instrument Corporation. All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without written permission of the publisher. General Instrument, the General Instrument logo, STARFONE and STARVUE are registered trademarks of General Instrument Corporation.
IMPORTANT SAFEGUARDS 1
Read instructions All the safety and operating instructions should be read before the appliance is operated.
2
Retain instructions The safety and operating instructions should be retained for future reference.
3
Heed warnings All warnings on the appliance and in the operating instructions should be adhered to.
4
Follow instructions All operating and use instructions should be followed.
5
Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6
7
Attachments Do not use attachments not recommended as they may cause hazard. Water and moisture Do not use this equipment near water; for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8
9
10
Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall causing serious injury and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the equipment. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the equipment and to protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or similar surface. Equipment should never be placed near or over a radiator or heat register, or in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Power sources This product should be operated only from the type of power sources indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. For equipment intended to operate from battery power, or other sources, refer to the operating instructions.
11
Ground or polarization This equipment may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12
Alternate warnings This equipment may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This pin will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
13
Power cord protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
14
Outdoor Antenna Grounding If an outside antenna or cable system is connected to the equipment, be sure the antenna or cable system is grounded as to provide some protection against voltage surges and built-up static charges.
15
16
17
18
19
Lightning For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power line surges.
20
damaged.
Safety check Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the product is in proper operational condition.
23
Telephone equipment Observe the following precautions when installing telephone modem equipment:
b If the equipment has been exposed to rain or water.
a Never install telephone wiring during a
c If liquid has been spilled, or objects have fallen
lightning storm.
into the equipment.
b Never install telephone jacks in a wet
d If the equipment does not operate normally by
location unless the jack is specifically designed for wet locations.
following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the equipment to its normal operation.
Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electrical shock.
Servicing Do not attempt to service this equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards, refer all servicing to qualified service personnel.
22
a When the power supply cord or plug is
Power lines An outside antenna system should not be located in the vicinity of overhead power lines or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal.
Object and liquid entry Never push objects of any kind into this equipment through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the product.
Damage requiring service Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
e If the equipment has been dropped or cabinet has been damaged.
f When the equipment exhibits a distinct change in performance, indicating a need for service.
21
Replacement parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
c Never touch uninsulated telephone wires or terminals unless the telephone lines have been disconnected at the network interface.
d Use caution when installing or modifying telephone lines.
24
Battery usage Notwithstanding any information provided by GI in this manual regarding the use of batteries, the end user assumes all responsibility and liability to use and dispose of batteries in accordance with all applicable laws, rules and regulations. GI will not be liable to anyone for the end user’s failure to use and/or dispose of batteries in the proper manner and in accordance with such laws, rules and regulations, or for any defect contained in batteries which may cause injury damage to persons or property.
CON TENTS
Introduction..................................................2 Front Panel..........................................................................3 Rear Panel ...........................................................................5
Favorite Channels........................................ 15 Adding Favorite Channels.............................................15 Removing Favorite Channels .......................................16
Recording Your Connections ...................... 7
Passwords ....................................................17 Adding a Parental Control Password.........................17 Adding a Pay-Per-View Password...............................18 Changing or Deleting Passwords ................................19
Basic Operation .............................................8 Turning Power On and Off.............................................8 Changing Channels............................................................8 Adjusting the Volume.......................................................9 Disabling the Remote Control.................................... 10 Restoring the Remote Control................................... 10 On-Screen Display ....................................... 11 Displaying the MAIN MENU ....................................... 11 Displaying the Program Guide .................................... 12 Tuning to a Program...................................................... 13 Channel Status ................................................................ 14
Parental Control ........................................20 Setting Control by Channel..........................................21 Setting Control by Rating .............................................22 Setting Control by Time ...............................................23 Activating Parental Control..........................................24 Pay-Per-View ..............................................25 Purchase Control........................................ 26 Program Recording .................................... 27
Timers..........................................................29 Setting the Program Timer .......................................... 29 Adding a Force Tune Timer ........................................ 30 Adding a Record Timer ................................................ 31 Edit, Review, or Delete a Timer................................. 32 Setting the Sleep Timer ................................................ 33 Setting the Alarm Timer............................................... 34 Messages ...................................................... 35 Time display ................................................36 AC Power Outlet......................................... 37 Basic Connections ....................................... 38 Basic Connections.......................................................... 39
With Audio and Video Baseband Connections ......40 With Picture-in-Picture TV ..........................................41 With Your Stereo...........................................................42 Music Choice ............................................... 43 Adding or Removing Favorite Channels ...................45 Selecting by Channel ......................................................46 Selecting by Theme.........................................................47 Adding and Removing Parental Control ...................48 Using Parental Control..................................................49 Setting the Volume Equalizer .......................................50 Setting Best Stereo Volume .........................................51 Blanking the Screen ........................................................52 Audio Bypass Switch ................................... 53 The VCR Controller.................................... 56
INTRODUCTION Welcome to General Instrument’s CFT2200 set-top terminal, your introduction to unsurpassed audio and video, cable entertainment. The CFT2200 provides an on-screen display to view, control, and edit program and special features. To understand your CFT2200, take the time to read this guide and your remote control instructions.
2
INTRODUCTION
Front Panel You can turn on the CFT2200, change channels, control volume, and access on-screen menus, using the front-panel buttons or the remote control. 1 0 ( 6 6 $ * ( 6
0 (18
6(/(&7
(17(5
92/80 (
&+$11(/
2
3
4
5
6
3
7
8
INTRODUCTION
Front Panel The front panel control keys can be used to operate the CFT2200. 1
DISPLAY
Displays channel or time.
2
MENU
Displays the MAIN MENU on-screen.
3
SELECT
Highlights menu options.
4
ENTER
Accepts choices entered on the menus.
5
VOLUME
Increases or decreases the volume.
6
CHANNEL
Sequentially steps through the channels.
7
INDICATOR
Lights if a message is present.
8
POWER
Turns the CFT2200 on or off.
4
INTRODUCTION
Rear Panel The rear panel contains connectors, an ac outlet, and removable panels for installing optional modules with special features. 1
2
3
7279
5),1 ,5
/5
9, '(2
6:,7&+(' 9
,339
+]$ :0$;
4
5
6
7
5
INTRODUCTION
Rear Panel The rear panel contains the following connectors and optional features: 1
AC OUTLET
This connector provides an ac outlet to connect the TV.
2
TO TV
This is the basic connection from the CFT-2200 to the TV or the VCR.
3
RF IN
This is the connection for cable input from the cable wall outlet.
4
IR
This is the connection for the IR Blaster adapter.
5
L-R
These are the left and right audio connections.
6
VIDEO
This is the connection for video to your TV or VCR.
7
IPPV
This connection is the optional impulse Pay-Per-View feature.
6
RECORDING YOUR CONNECTIONS Use this diagram to draw your cable connections. This diagram will help you reconnect your system if you move or add new equipment. NOTE Always disconnect the power from the CFT-2200 before moving it or changing the cable connections. 6:,7&+(' 9 +]$ :0$;
O p tio n al fe atu res
O p tio n al fe atu res
D igital aud io
O p tio n al fe atu res
D igital aud io A /B In A /B O ut STA R F O N E STA RV U E SW ITC H R F B y p ass sw itch by pass 72 5I
', *, 7$ /
287
5)
$
', *, 7$ /
287
$8', 2 , 1
5)
287 , 1
&$%/(,1 3+21(
72&219
$17 &219 ,1
VCR optional
TV
STER EO $8', 2 , 1
,1
&$%/( , 1
C A B LE IN
L
R A UD IO
V IDEO
$8', 2
/()7
9, '(2
&$%/( 287 $8', 2
5, *+7
$8', 2 287
287
9, '(2
/()7
7
)520 &219
%
&$%/(,1
79 , 1
5, *+7
,1
BASIC OPERA TION
Turning Power On and Off Press POWER on the front panel or the remote control to turn the CFT2200 on and off. If you are using a universal remote control, be sure it is set to control the CFT2200.
Changing Channels Press CHANNEL on the front panel or CHAN on the remote control to change channels.
8
BASIC OPERA TION
Adjusting the Volume Press VOLUME on the front panel or VOL on the remote control to adjust the volume. When you adjust the volume, the volume scale is displayed on the screen. To turn the sound off and on, press MUTE on the remote control. The CFT2200 can be set for the best sound quality on your stereo or TV. When you reach this setting, a small triangle and the message BEST STEREO are displayed.
9
BASIC OPERA TION
Disabling the Remote Control NOTE To understand your remote control, read the instructions that came with it.
You can temporarily disable your remote control to prevent accidentally changing the current programming settings. To disable the remote control:
1
Press MENU on the front panel of the CFT2200 or on the remote control to display the MAIN MENU.
2
Select Control Your Terminal.
3
Select Deactivate Remote Control.
4
Press SELECT on the remote control. The letters rL0 (remote lockout) display on the front panel.
Restoring the Remote Control Press any key button on the CFT2200 front panel to restore the remote control.
10
ON-SCREEN DISPLAY
Displaying the MAIN MENU The on-screen display offers many options that enhance your television viewing. The easy-to-follow screens enable you to locate information you want quickly and easily. The bottom of each screen provides instructions for making selections. Before using the on-screen display, read the user guide supplied with your remote control. Press MENU to display the MAIN MENU. The menu shown is only a sample. The one you see can have different entries in a different order.
NOTE The on-screen display is set on a 15-second internal timer. If you do not complete your selection before timing out, you must start again. Read the instructions before beginning.
11
ON-SCREEN DISPLAY
Displaying the Program Guide To display the program guide:
1
On the MAIN MENU, select Program Guide or press GUIDE on the remote control to display the program guide.
2
Follow the instructions on the bottom of the screen to highlight a program. Press INFO to see more information about the program. Press INFO again to return to the program guide.
3
Press EXIT to resume regular TV viewing.
7:& SP
12
ON-SCREEN DISPLAY
Tuning to a Program The program guide and force tune timer are used to tune a program. To tune a program on the program guide: 1 Highlight a program or enter a program channel number. The program for the entered channel number is displayed at the top of the program guide.
2
Press SELECT. The following conditions will result:
If the program you selected is current, the CFT2200 tunes to it immediately.
If you selected a program that is scheduled at some future time, the TUNE A PROGRAM screen is displayed and you need to set a program timer. See page 29 for details.
If you select a special program (for example, a Pay-Per-View), other screens with information about the program are displayed. See page 25 for details.
If the program you select is under parental control, you are prompted to enter your parental control password. See page 17 about parental control passwords. To scan premium and Pay-Per-View channels on the program guide press FAV, PPV, or MOVIE on the remote control. To tune a program using a force tune timer, see details on page 30.
13
ON-SCREEN DISPLAY
Channel Status When you change channels, the Channel Status screen is displayed. This screen includes the Mini-Guide and information about special features that have been set for that channel, such as, parental control. The channel status screen disappears after five seconds, but you can press EXIT or SELECT on the remote control to remove it immediately. You can enable or disable the automatic Channel Status screen. To set the Channel Status screen:
1
Press MENU on the front panel of the CFT2200 or on the remote control to display the MAIN MENU.
NOTE
2
On the MAIN MENU select Control Your Terminal.
If you disable automatic display, to access the CHANNEL STATUS screen and Mini-Guide, press INFO on the remote control.
3
Select Modify Screen Display.
4
Select Disable Channel Status.
5
Highlight Enable Channel Status or Disable Channel Status.
6
Press SELECT and then press EXIT.
14
FAVORITE CHA NNELS
Adding Favorite Channels You can store your favorite channel numbers for quick and easy access. To add favorite channels:
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Favorite Channels.
3
Highlight the channel you want to add to the favorite channel list, then press SELECT. The fav designation is displayed next to the channel.
4
Press EXIT when you are finished.
To scan your favorite channels, press FAV on the remote control. If a channel is defined as a favorite, FAV appears in the channel information display when you tune to it.
15
FAVORITE CHA NNELS
Removing Favorite Channels To remove a favorite channel:
1
Highlight the channel you want to remove from the favorite channel list, then press SELECT. The fav designation next to the channel disappears. Press 0 (zero) to remove all favorite channels.
2
Press EXIT when you are finished.
16
PASSWORDS The parental control and the Pay-Per-View features enable you to control channel access using a password. You can create a different password for each.
Adding a Parental Control Password To add a four-digit Parental Control password (for example, 1224):
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Parental Control.
3
Select Control Viewing By Channel, Rating, or Time.
4
Using the numeric keys on the remote control, enter your password on the ENTER PARENTAL CONTROL PASSWORD screen and then press SELECT.
5
Re-enter the password to confirm it.
6
On the ACTIVATE PARENTAL CONTROL screen, press SELECT.
If you forget your password, call your cable service provider for assistance.
17
PASSWORDS
Adding a Pay-Per-View Password To add a four-digit Pay-Per-View purchase password (for example, 1228):
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Spending Limit.
3
Use the numeric keys on your remote control to enter the password you have chosen and then press SELECT. The SET SPENDING LIMIT screen is displayed.
4
Use the numeric keys on your remote control to enter the spending limit. If you set the limit at $00.00, all purchases require the password. If you set a limit greater then zero, the password is required only if the purchase exceeds the limit.
5
Press SELECT.
NOTE After you set the password, if you enter it incorrectly, you are prompted to try again. If you enter it incorrectly three times in a row, you must wait 15 minutes before trying again.
If you forget your password, call your cable company for assistance.
18
PASSWORDS
Changing or Deleting Passwords You can change your parental control and purchase passwords at any time. To change a password:
1
On the MAIN MENU, select Control Program Viewing.
2
Select Change Password.
3
Select the password that you want to change.
4
Enter your new password.
5
Follow the on-screen instructions to enter the new password or delete your old password by pressing the SELECT key twice.
6
Press EXIT when you are finished.
19
PARENTAL CON TROL
NOTE Setting parental control by channel number is the most secure method. Parental control by rating or time depends on information sent periodically by your cable service provider, usually about every half-hour. This information is erased by a power failure and parental control is lost until your cable service provider resends the necessary information after power is restored.
If you want to control your children’s television viewing, you can use the parental control feature after creating your 4-digit password. You can prevent the CFT2200 from tuning to programming based on channel number, rating, or time of day. When anyone tries to tune a controlled program, a password prompt is displayed. After you enter the password, all programming is accessible without the password. To establish parental control:
1
Create a four-digit password (See page 17).
2
Select the channels, ratings, or time periods that you want to control. See instructions for setting and re-activating parental control on pages 21-24.
20
PARENTAL CON TROL
Setting Control by Channel To set parental control by channel:
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Parental Control.
3
Select Control Viewing By Channel.
4
Use the cursor keys to highlight the channel.
5
Press SELECT. A lock symbol appears next to the channel.
6
To remove control, highlight the channel and then press SELECT. Press 0 (zero) to clear all channels.
7
If you want additional control by other methods, press LAST to display the SET PARENTAL CONTROL screen. Press EXIT when you are finished.
21
PARENTAL CON TROL
Setting Control by Rating Choosing control by rating allows unrestricted viewing of programs below the rating you selected. For example, if you choose R, programs rated PG-13, PG, or G can be viewed without the password; programs rated R, NC-17, or NR require the password. To set parental control by rating:
1 2 3
On the MAIN MENU, select Control Program Viewing.
4 5
Use the cursor keys to highlight the rating.
Select Set Parental Control. On the SET PARENTAL CONTROL screen, select Control Viewing By Rating.
Press SELECT. A lock symbol appears next to the rating and all higher ratings.
6
To remove control, highlight the rating and then press SELECT. Press 0 (zero) to clear all ratings.
7
If you want additional control by other methods, press LAST to display the SET PARENTAL CONTROL screen. Press EXIT when you are finished. 22
PARENTAL CON TROL
Setting Control by Time To set parental control by time:
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Parental Control.
3
On the SET PARENTAL CONTROL screen, select Control Viewing By Time.
4
Set the timer to ENABLE.
5
Set the control start and stop times.
6
Press SELECT.
7
To remove control by time, set the timer to DISABLE.
8
If you want additional control by other methods, press LAST to display the SET PARENTAL CONTROL screen. Press EXIT when you are finished.
23
PARENTAL CON TROL
Activating Parental Control You can view controlled programs by entering your password when prompted. When you do this, all programming is accessible without the password until you re-establish parental control. To activate parental control:
1
On the MAIN MENU select Control Program Viewing.
2
Select Activate Parental Control.
3
Press EXIT.
24
PAY-PER-VIEW If your cable service provider supports Pay-Per-View purchases through the CFT2200, you can purchase programs from the Program Guide. Special screens display information about the program and help you complete the purchase. To purchase a program:
1
Press SELECT to begin the purchase process.
2
Enter your parental control and purchase passwords. Before the purchase is made, you are given the opportunity to confirm or cancel it.
If you selected a current program, the CFT2200 tunes to it. If the program is on at some future time, the CFT2200 sets a timer to tune to it.
25
PURCHASE CON TROL
NOTE If you enter your password incorrectly, you are prompted to try again. If you enter it incorrectly three times in a row, you must wait 15 minutes before trying again.
Purchase control enables you to control Pay-Per-View purchases by creating a password and spending limit. Enable purchase control by establishing a purchase password and spending limit. The purchase password is not the same as the parental control password, although you can define them by using the same four digits. Choose a four-digit purchase password that is easy for you to remember. If you forget your password, call your cable service provider for assistance. See page 18 to create a purchase password and spending limit.
26
PROG RAM RE CORDING The program guide and record timer are used to record programs. NOTE While a recording is in progress, the CFT2200 front panel displays rEC, and control from front panel buttons and remote control are locked out. To exit the record mode and restore control, press EXIT and then REC on the remote control.
To record a program using the record timer, see page 31. To record a program using the program guide:
1
Put a tape in your VCR.
2
On the MAIN MENU, select Program Guide or press GUIDE on the remote control.
3
Follow the directions on the bottom of the screen to highlight the program that you want to record.
4
Press REC on the remote control.
5
Select One Time, Daily, Weekly, Weekdays, or Weekends on the RECORD A PROGRAM screen.
6
Press SELECT. You will have a chance to review your settings before confirming them.
27
PROG RAM RE CORDING
7
Program your VCR to turn on at the same time and tune to the same channel that you set on the RECORD A PROGRAM screen. The CFT2200 and the VCR must be programmed separately for each scheduled recording.
If the program you select is under parental control, you are prompted to enter your parental control password.
If you select a Pay-Per-View program, you are prompted to complete the purchase process.
If you set a timer that conflicts with one you set earlier, you are prompted to select one. Follow the on-screen instructions.
28
TIMERS
Setting the Program Timer The TUNE A PROGRAM screen is displayed when you try to tune a program playing in the future. To set the timer:
1
Select One-Time, Daily, Weekly, Weekdays, or Weekends.
2
Press SELECT and then EXIT. The area around the program in the program guide turns dark blue to indicate that a timer is set. The CFT2200 automatically tunes to the program at its start time.
29
TIMERS
Adding a Force Tune Timer A Force Tune Timer is used to tune a program at the desired time. To add a Force Tune Timer:
1
On the MAIN MENU, select Control Program Timers.
2
Select Add Force Tune Timer.
3
Follow the instructions on the bottom of the screen to make your selections and then press SELECT. If you set a timer that conflicts with one you set earlier, you are prompted to select one.
4
Confirm your selection and then press SELECT on your remote control.
To Move Press:
30
TIMERS
Adding a Record Timer A Record Timer is used to record a program at a desired time. To add a Record Timer:
To Move Press:
1
On the MAIN MENU, select Control Program Timers.
2
Select Add Record Timer.
3
Follow the instructions on the bottom of the screen to make your selections and then press SELECT. If you set a timer that conflicts with one you set earlier, you are prompted to select which one to keep.
4
Confirm your selection and then press SELECT on your remote control.
31
TIMERS
Edit, Review, or Delete a Timer To edit, review, or delete timers use the EDIT PROGRAM TIMERS screen:
1
On the MAIN MENU, select Control Program Timers.
2
Select Edit Program Timers.
3
Select a timer to edit, review, or delete.
4
Follow the instructions on the bottom of the screen to make your selections and then press SELECT.
5
Confirm your selection and then press SELECT on your remote control.
32
TIMERS
Setting the Sleep Timer You can set the CFT2200 to turn itself and your TV off after a certain period of time. Your TV must be plugged into the ac outlet in the rear of the CFT2200 and the outlet must be set to switch on and off with the CFT2200. See page 37 to set the ac outlet. To set the sleep timer:
1
On the MAIN MENU, select Control Your Terminal.
2
Select Set Sleep Timer.
3
Set the time.
4
Press SELECT and then press EXIT.
33
TIMERS
Setting the Alarm Timer You can set alarm timers to turn the CFT2200 and your TV on and off at certain times. Your TV must be plugged into the ac outlet on the rear of the CFT2200 and the outlet must be set to switch on and off with the CFT2200. See page 37 to set the ac outlet. To set the alarm timers:
1
On the MAIN MENU, select Control Your Terminal.
2
Select Set Alarm Timers.
3
Set Daily Turn On and Daily Turn Off to Enabled.
4
Set the on and off times. Momentarily pressing the left and right cursor keys changes the time by one minute. Press and hold the cursor keys to change the time in 15-minute increments.
5
Press SELECT and then press EXIT.
34
MESSAGES Occasionally, your cable service provider might send you messages about new service offerings, special promotions, or other information. The MESSAGES indicator is displayed on the CFT2200 front panel until you read the messages displayed. To read the messages:
1
On the MAIN MENU, select Messages.
2
Select a message from the list.
3
After reading the message, you have the option to save it. While you can delete most of the messages, some can only be deleted by your service provider.
4
Press EXIT when you are finished.
35
TIME DISPLAY The front panel of the CFT2200 normally displays the selected channel number but you can display the time. When you change channels, the new channel is momentarily displayed. When you turn the terminal off, it continues to display the time. To display the time: 0 ( 6 6 $ * ( 6
&+$11(/
1
On the MAIN MENU, select Control Your Terminal.
2
Select Set Up Your System.
3
Select Display Time On Your Terminal.
4
Highlight Enable and then press SELECT.
5
Press EXIT.
36
AC POWER OUTLE T
NOTE Some TV sets require the power to always remain on. Check the user handbook for your TV.
You can plug your TV into the ac connector on the rear of the CFT2200. This enables you to turn your TV on and off with the CFT2200. The default setting for the outlet is switched (that is, it turns on and off with the CFT2200). To set the ac power outlet to unswitched:
1
On the MAIN MENU, select Control Your Terminal.
2
Select Set Up Your System.
3
Select Set AC Power Outlet.
4
Highlight the unswitched option.
5
Press SELECT and then press EXIT.
37
BASIC CONNECTIONS You may want to add a VCR or your stereo system. To add equipment, you need the correct cables:
For most connections, use 75-ohm coaxial cable equipped with F-type connectors.
To use the audio or video outputs from the CFT2200, use cables equipped with RCA-type connectors.
The following diagram illustrates the basic connection to view cable programming. With an optional VCR, you can record programming. You can record and listen to stereo programming if you have a stereo TV or stereo VCR.
38
BASIC CONNECTIONS
Basic Connections F rom cab le o utlet
6:,7&+(' 9 +]$ :0$;
In TV
VCR optional ,1
&$%/( , 1
C A B LE IN
L
R A UD IO
V IDEO
$8', 2
9, '(2
287
&$%/( 287 $8', 2
9, '(2
O ut
39
BASIC CONNECTIONS
NOTE
With this hookup, you can listen in stereo to digitally encoded audio programming (Music Choice and Home Theater) if offered by your cable service provider, through your stereo TV.
With Audio and Video Baseband Connections The following diagram illustrates how to hookup to a TV having optional audio and video baseband connections. F rom cab le o utlet
6:,7&+(' 9 +]$ :0$;
L V id eo TV
C A B LE IN
R L
R
V IDEO
A UD IO
40
BASIC CONNECTIONS
With Picture-in-Picture TV If your TV offers this feature, the following diagram illustrates how to enable Picture-in-Picture. You can only tune non-scrambled channels on the B input. F rom cab le o utlet
Sp litter
6:,7&+(' 9 +]$ :0$;
Picture-in-Pitcure TV
In A
In C A B LE IN
41
L
R A UD IO
V IDEO
B
BASIC CONNECTIONS
With Your Stereo You can listen to monaural and stereo audio through your stereo TV as usual, and turn on your stereo to listen to digitally encoded audio programming (Music Choice and Home Theater) if provided by your cable service provider. F rom cab le o utlet
6:,7&+(' 9 +]$ :0$;
L
R VCR optional
STER EO $8', 2 , 1
/()7
5, *+7
$8', 2 287
/()7
5, *+7
TV
,1
&$%/( , 1
$8', 2
9, '(2
C A B LE IN
287
&$%/( 287 $8', 2
9, '(2
42
L
R A UD IO
V IDEO
MUSIC CHOICE If you have the Music Choice option, you can enjoy commercial-free, CD-quality music. The on-screen display for Music Choice is similar to the TV viewing displays. You can tune to Music Choice in two ways:
Using the remote control, press MUSIC. If you are watching television, the CFT2200 switches to Music Choice. If the CFT2200 is off, it switches on and tunes to Music Choice. The CFT2200 displays the music channel number with the letter "A" before it (for example, A14). When you change volume, the volume level is momentarily displayed.
On the MAIN MENU, select Listen to Music.
Listen To Music
43
MUSIC CHOICE When you tune to Music Choice, the Song ID screen displays information about the current song. The following remote control keys are especially important:
The right cursor key lists information about previously played songs.
EXIT returns
MENU
Press MUSIC on the remote control to tune to Music Choice, and change channels with the CHAN keys.
Press MUSIC again or select Watch Television from the MUSIC MAIN MENU to return to watching television.
1
to the Song ID screen for the current song.
returns to the MUSIC MAIN MENU.
Your TV does not need to be on to listen to music. If you want to listen through your stereo system, you can turn off your TV (See details on page 42 to connect your stereo.)
44
MUSIC CHOICE
Adding or Removing Favorite Channels The CFT2200 lets you scan through your list of Music Choice favorite channels. To add or remove channels in your list:
SELECT
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Set Favorite Channels.
3
To add a channel, highlight it on the SET FAVORITE CHANNELS screen and press SELECT. A check mark appears next to the channel. o r T o remove a channel, highlight it on the Set Favorite Channels screen and press SELECT. The check mark disappears. To remove all channels, press the zero key.
4
Press EXIT when you are finished.
You can now scan through your favorite channels by pressing FAV on the remote.
45
MUSIC CHOICE
Selecting by Channel To make your selection from the full list of available channels:
SELECT
1
On the MUSIC MAIN MENU, select Find a Channel.
2
Highlight your choice and press SELECT.
3
If you are satisfied with your choice, press EXIT. If not, make another.
The bottom of the FIND A CHANNEL screen shows information for the current song.
46
MUSIC CHOICE
Selecting by Theme You can easily tune the type of music you enjoy most by choosing channel listings by theme. To select channel listings by theme:
1
On the MUSIC MAIN MENU, select Listen to Channels By Theme.
2
Highlight your choice and press SELECT.
3
Highlight your choice of channel on the theme list and press SELECT.
4
If you are satisfied with your choice, press EXIT. If not, make another.
47
MUSIC CHOICE
Adding and Removing Parental Control As with television programming, you can restrict access to music channels by using a parental control password. This is the same password used for controlling TV viewing.
R
To add or remove restriction from selected music channels:
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Set Parental Control.
3
Enter your password.
4
To add restriction, highlight the channel and press SELECT. A check mark appears next to the channel.
R
SELECT
o r T o remove restriction, highlight the channel and press SELECT. The check mark disappears.
5
Press EXIT.
48
MUSIC CHOICE
Using Parental Control You can listen to parentally controlled channels by entering your password. When you do this, all music and TV programming is accessible without the password. To re-establish control, turn the CFT2200 off and on, or:
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Control Audio Configuration.
3
Highlight Lock Terminal and then press SELECT. The notation (UNLOCKED) changes to (LOCKED).
4
Press EXIT.
49
MUSIC CHOICE
Setting the Volume Equalizer The CFT2200 features a volume equalizer that reduces the dynamic range of the music to prevent wide changes in volume from song to song. If your cable operator supports this feature, you can turn the volume equalizer on. To switch the equalizer on or off:
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Control Audio Configuration. The CONTROL AUDIO CONFIGURATION screen indicates the current setting.
3
To change the setting, highlight Change Volume Equalizer and then press SELECT.
4
Press EXIT.
50
MUSIC CHOICE
Setting Best Stereo Volume To set the volume for best stereo listening:
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Control Audio Configuration.
3
Select Set Best Stereo Volume and then press SELECT. The notation SET indicates that volume is set for best stereo.
4
Press EXIT.
51
MUSIC CHOICE
Blanking the Screen While you are tuned to Music Choice, the on-screen display screens remain on. If you are concerned about the screens damaging the TV picture tube, you can set the CFT2200 to blank the screen.
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Control Audio Configuration.
3
Select Change Screen Blanking and then press SELECT to switch between on and off. The screen does not blank immediately. It will blank after a few minutes if you do not make any menu selections.
4
Press EXIT.
To restore Music Choice screens, press any button on the CFT2200 front panel or any key on the remote control.
52
AUDIO BYPASS SWITCH
NOTE Use of the audio bypass switch assumes that you always listen to audio through your home stereo and that a stereo signal is connected to the bypass switch AUDIO IN jack. If you listen through your TV speakers, digitally encoded audio programming will be heard in monaural format. If you listen through your home stereo with no signal connected to the AUDIO IN jack, all non-digitally encoded audio programming will not have an audio output.
When equipped with the optional audio bypass switch, the CFT2200 can automatically switch between its internal digital audio decoder and an external audio source to drive the left and right audio outputs. You can connect the left and right audio outputs of a stereo TV or VCR to the CFT2200 to always hear the best-quality sound through your stereo. To use the switch:
Your CFT2200 must include the optional audio bypass switch.
Your TV system setup must include a stereo for audio output.
Your TV system setup must include a stereo TV or VCR with left and right outputs.
53
AUDIO BYPASS SWITCH To set the switch:
1
From the MAIN MENU, select Listen To Music.
2
On the Music MAIN MENU select Control Channel Listening.
3
Select Control Audio Configuration.
4
Highlight Audio Bypass Control and then press SELECT to switch between on and off.
5
Press EXIT to return to the Song ID screen, or press MENU to return to the MAIN MENU.
When the audio bypass switch is on and the CFT2200 is off, whatever signal is connected to the AUDIO IN jack is passed through to the left and right audio outputs of the CFT2200.
54
AUDIO BYPASS SWITCH This hookup uses the optional audio bypass switch to loop decoded stereo programming back into the CFT2200 for output on the left and right audio jacks. NOTE F rom cab le o utlet
With this hookup, you can listen to all audio programming through your home stereo and always hear the best-quality sound. ', *, 7$ / 287
$8', 2 , 1
6:,7&+(' 9 +]$ :0$;
L A u dio in
STER EO
R
o utp ut VCR optional
in
$8', 2 , 1
/()7
5, *+7
$8', 2 287
/()7
5, *+7
O ut
,1
&$%/( , 1
$8', 2
9, '(2
287
&$%/( 287 $8', 2
R
L TV
9, '(2
55
C A B LE IN
L
R A UD IO
V IDEO
THE VCR CON TROLLER Some cable service providers offer the option of infrared VCR control. If your CFT2200 is equipped with the VCR controller option, an IR transmitter is plugged into the rear of the CFT2200 and mounted to the front of your VCR. The CFT2200 can then turn the VCR on to record a selected program and turn it off when the program is over.
0 ( 6 6 $ * ( 6
0 (1 8
6(/(&7
(17(5
92/80 (
&+$11(/
IR B laster placed near VCR rem ote-control sensor
56
THE VCR CON TROLLER If you have the VCR controller option, your cable service provider will usually set it up during the installation of the CFT2200. If you need to set up the VCR controller:
1
On the MAIN MENU select Control Your Terminal.
2
Select Set Up Your System.
3
Select Set Up VCR Controller.
4
Follow the on-screen directions. You will be prompted for the manufacturer of your VCR and to check for the proper VCR controller response.
5
Press EXIT when you are finished.
57
General Instrument Corporation 463701-001-99 7/99
0 ( 6 6 $ * ( 6
0(18
6(/(&7
(17(5
92/80(
&+$11(/
&$87,21
REPAIRS If you find the unit in need of repair, contact your cable system operator for repair or replacement.
5,6.2)(/(&75,&6+2&.
NOTE TO CATV SYSTEM INSTALLER &$87,21 725('8&(7+(5,6.2)(/(&75,&6+2&. '21275(029(&29(5 25%$&. 1286(56(59,&($%/(3$576,16,'( 5()(56(59,&,1*7248$/,),('6(59,&(3(56211(/
Graphical symbols and supplemental warning marking locations on bottom of terminal.
WARNING
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close as possible to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING Elec tr ic ser vice G ro und equipm ent clam p
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
A ntenna le ad in w ire
CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
A ntenna discharge u nit (N E C S ection 810 -20 )
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This installation should be made by a qualified service person and should conform to all local codes.
G ro und in g c la mp s
G ro unding co nduc tor s (N EC Section 810-2 1)
Powe r se rvice g rounding electro de sy stem (N EC A rtic le 2 50, Par t H ) N EC =N AT IO N A L EL EC T RIC A L C O D E
Copyright © 1999 by General Instrument Corporation. All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without written permission of the publisher. General Instrument, the General Instrument logo, STARFONE and STARVUE are registered trademarks of General Instrument Corporation.
IMPORTANT SAFEGUARDS 1
Read instructions All the safety and operating instructions should be read before the appliance is operated.
2
Retain instructions The safety and operating instructions should be retained for future reference.
3
Heed warnings All warnings on the appliance and in the operating instructions should be adhered to.
4
Follow instructions All operating and use instructions should be followed.
5
Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6
7
Attachments Do not use attachments not recommended as they may cause hazard. Water and moisture Do not use this equipment near water; for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8
9
10
Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall causing serious injury and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the equipment. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the equipment and to protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or similar surface. Equipment should never be placed near or over a radiator or heat register, or in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Power sources This product should be operated only from the type of power sources indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. For equipment intended to operate from battery power, or other sources, refer to the operating instructions.
11
Ground or polarization This equipment may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12
Alternate warnings This equipment may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This pin will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
13
Power cord protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
14
Outdoor Antenna Grounding If an outside antenna or cable system is connected to the equipment, be sure the antenna or cable system is grounded as to provide some protection against voltage surges and built-up static charges.
15
16
17
18
19
Lightning For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power line surges.
20
damaged.
Safety check Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the product is in proper operational condition.
23
Telephone equipment Observe the following precautions when installing telephone modem equipment:
b If the equipment has been exposed to rain or water.
a Never install telephone wiring during a
c If liquid has been spilled, or objects have fallen
lightning storm.
into the equipment.
b Never install telephone jacks in a wet
d If the equipment does not operate normally by
location unless the jack is specifically designed for wet locations.
following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the equipment to its normal operation.
Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electrical shock.
Servicing Do not attempt to service this equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards, refer all servicing to qualified service personnel.
22
a When the power supply cord or plug is
Power lines An outside antenna system should not be located in the vicinity of overhead power lines or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them may be fatal.
Object and liquid entry Never push objects of any kind into this equipment through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the product.
Damage requiring service Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
e If the equipment has been dropped or cabinet has been damaged.
f When the equipment exhibits a distinct change in performance, indicating a need for service.
21
Replacement parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
c Never touch uninsulated telephone wires or terminals unless the telephone lines have been disconnected at the network interface.
d Use caution when installing or modifying telephone lines.
24
Battery usage Notwithstanding any information provided by GI in this manual regarding the use of batteries, the end user assumes all responsibility and liability to use and dispose of batteries in accordance with all applicable laws, rules and regulations. GI will not be liable to anyone for the end user’s failure to use and/or dispose of batteries in the proper manner and in accordance with such laws, rules and regulations, or for any defect contained in batteries which may cause injury damage to persons or property.
CON TENTS
Introduction..................................................2 Front Panel..........................................................................3 Rear Panel ...........................................................................5
Favorite Channels........................................ 15 Adding Favorite Channels.............................................15 Removing Favorite Channels .......................................16
Recording Your Connections ...................... 7
Passwords ....................................................17 Adding a Parental Control Password.........................17 Adding a Pay-Per-View Password...............................18 Changing or Deleting Passwords ................................19
Basic Operation .............................................8 Turning Power On and Off.............................................8 Changing Channels............................................................8 Adjusting the Volume.......................................................9 Disabling the Remote Control.................................... 10 Restoring the Remote Control................................... 10 On-Screen Display ....................................... 11 Displaying the MAIN MENU ....................................... 11 Displaying the Program Guide .................................... 12 Tuning to a Program...................................................... 13 Channel Status ................................................................ 14
Parental Control ........................................20 Setting Control by Channel..........................................21 Setting Control by Rating .............................................22 Setting Control by Time ...............................................23 Activating Parental Control..........................................24 Pay-Per-View ..............................................25 Purchase Control........................................ 26 Program Recording .................................... 27
Timers..........................................................29 Setting the Program Timer .......................................... 29 Adding a Force Tune Timer ........................................ 30 Adding a Record Timer ................................................ 31 Edit, Review, or Delete a Timer................................. 32 Setting the Sleep Timer ................................................ 33 Setting the Alarm Timer............................................... 34 Messages ...................................................... 35 Time display ................................................36 AC Power Outlet......................................... 37 Basic Connections ....................................... 38 Basic Connections.......................................................... 39
With Audio and Video Baseband Connections ......40 With Picture-in-Picture TV ..........................................41 With Your Stereo...........................................................42 Music Choice ............................................... 43 Adding or Removing Favorite Channels ...................45 Selecting by Channel ......................................................46 Selecting by Theme.........................................................47 Adding and Removing Parental Control ...................48 Using Parental Control..................................................49 Setting the Volume Equalizer .......................................50 Setting Best Stereo Volume .........................................51 Blanking the Screen ........................................................52 Audio Bypass Switch ................................... 53 The VCR Controller.................................... 56
INTRODUCTION Welcome to General Instrument’s CFT2200 set-top terminal, your introduction to unsurpassed audio and video, cable entertainment. The CFT2200 provides an on-screen display to view, control, and edit program and special features. To understand your CFT2200, take the time to read this guide and your remote control instructions.
2
INTRODUCTION
Front Panel You can turn on the CFT2200, change channels, control volume, and access on-screen menus, using the front-panel buttons or the remote control. 1 0 ( 6 6 $ * ( 6
0 (18
6(/(&7
(17(5
92/80 (
&+$11(/
2
3
4
5
6
3
7
8
INTRODUCTION
Front Panel The front panel control keys can be used to operate the CFT2200. 1
DISPLAY
Displays channel or time.
2
MENU
Displays the MAIN MENU on-screen.
3
SELECT
Highlights menu options.
4
ENTER
Accepts choices entered on the menus.
5
VOLUME
Increases or decreases the volume.
6
CHANNEL
Sequentially steps through the channels.
7
INDICATOR
Lights if a message is present.
8
POWER
Turns the CFT2200 on or off.
4
INTRODUCTION
Rear Panel The rear panel contains connectors, an ac outlet, and removable panels for installing optional modules with special features. 1
2
3
7279
5),1 ,5
/5
9, '(2
6:,7&+(' 9
,339
+]$ :0$;
4
5
6
7
5
INTRODUCTION
Rear Panel The rear panel contains the following connectors and optional features: 1
AC OUTLET
This connector provides an ac outlet to connect the TV.
2
TO TV
This is the basic connection from the CFT-2200 to the TV or the VCR.
3
RF IN
This is the connection for cable input from the cable wall outlet.
4
IR
This is the connection for the IR Blaster adapter.
5
L-R
These are the left and right audio connections.
6
VIDEO
This is the connection for video to your TV or VCR.
7
IPPV
This connection is the optional impulse Pay-Per-View feature.
6
RECORDING YOUR CONNECTIONS Use this diagram to draw your cable connections. This diagram will help you reconnect your system if you move or add new equipment. NOTE Always disconnect the power from the CFT-2200 before moving it or changing the cable connections. 6:,7&+(' 9 +]$ :0$;
O p tio n al fe atu res
O p tio n al fe atu res
D igital aud io
O p tio n al fe atu res
D igital aud io A /B In A /B O ut STA R F O N E STA RV U E SW ITC H R F B y p ass sw itch by pass 72 5I
', *, 7$ /
287
5)
$
', *, 7$ /
287
$8', 2 , 1
5)
287 , 1
&$%/(,1 3+21(
72&219
$17 &219 ,1
VCR optional
TV
STER EO $8', 2 , 1
,1
&$%/( , 1
C A B LE IN
L
R A UD IO
V IDEO
$8', 2
/()7
9, '(2
&$%/( 287 $8', 2
5, *+7
$8', 2 287
287
9, '(2
/()7
7
)520 &219
%
&$%/(,1
79 , 1
5, *+7
,1
BASIC OPERA TION
Turning Power On and Off Press POWER on the front panel or the remote control to turn the CFT2200 on and off. If you are using a universal remote control, be sure it is set to control the CFT2200.
Changing Channels Press CHANNEL on the front panel or CHAN on the remote control to change channels.
8
BASIC OPERA TION
Adjusting the Volume Press VOLUME on the front panel or VOL on the remote control to adjust the volume. When you adjust the volume, the volume scale is displayed on the screen. To turn the sound off and on, press MUTE on the remote control. The CFT2200 can be set for the best sound quality on your stereo or TV. When you reach this setting, a small triangle and the message BEST STEREO are displayed.
9
BASIC OPERA TION
Disabling the Remote Control NOTE To understand your remote control, read the instructions that came with it.
You can temporarily disable your remote control to prevent accidentally changing the current programming settings. To disable the remote control:
1
Press MENU on the front panel of the CFT2200 or on the remote control to display the MAIN MENU.
2
Select Control Your Terminal.
3
Select Deactivate Remote Control.
4
Press SELECT on the remote control. The letters rL0 (remote lockout) display on the front panel.
Restoring the Remote Control Press any key button on the CFT2200 front panel to restore the remote control.
10
ON-SCREEN DISPLAY
Displaying the MAIN MENU The on-screen display offers many options that enhance your television viewing. The easy-to-follow screens enable you to locate information you want quickly and easily. The bottom of each screen provides instructions for making selections. Before using the on-screen display, read the user guide supplied with your remote control. Press MENU to display the MAIN MENU. The menu shown is only a sample. The one you see can have different entries in a different order.
NOTE The on-screen display is set on a 15-second internal timer. If you do not complete your selection before timing out, you must start again. Read the instructions before beginning.
11
ON-SCREEN DISPLAY
Displaying the Program Guide To display the program guide:
1
On the MAIN MENU, select Program Guide or press GUIDE on the remote control to display the program guide.
2
Follow the instructions on the bottom of the screen to highlight a program. Press INFO to see more information about the program. Press INFO again to return to the program guide.
3
Press EXIT to resume regular TV viewing.
7:& SP
12
ON-SCREEN DISPLAY
Tuning to a Program The program guide and force tune timer are used to tune a program. To tune a program on the program guide: 1 Highlight a program or enter a program channel number. The program for the entered channel number is displayed at the top of the program guide.
2
Press SELECT. The following conditions will result:
If the program you selected is current, the CFT2200 tunes to it immediately.
If you selected a program that is scheduled at some future time, the TUNE A PROGRAM screen is displayed and you need to set a program timer. See page 29 for details.
If you select a special program (for example, a Pay-Per-View), other screens with information about the program are displayed. See page 25 for details.
If the program you select is under parental control, you are prompted to enter your parental control password. See page 17 about parental control passwords. To scan premium and Pay-Per-View channels on the program guide press FAV, PPV, or MOVIE on the remote control. To tune a program using a force tune timer, see details on page 30.
13
ON-SCREEN DISPLAY
Channel Status When you change channels, the Channel Status screen is displayed. This screen includes the Mini-Guide and information about special features that have been set for that channel, such as, parental control. The channel status screen disappears after five seconds, but you can press EXIT or SELECT on the remote control to remove it immediately. You can enable or disable the automatic Channel Status screen. To set the Channel Status screen:
1
Press MENU on the front panel of the CFT2200 or on the remote control to display the MAIN MENU.
NOTE
2
On the MAIN MENU select Control Your Terminal.
If you disable automatic display, to access the CHANNEL STATUS screen and Mini-Guide, press INFO on the remote control.
3
Select Modify Screen Display.
4
Select Disable Channel Status.
5
Highlight Enable Channel Status or Disable Channel Status.
6
Press SELECT and then press EXIT.
14
FAVORITE CHA NNELS
Adding Favorite Channels You can store your favorite channel numbers for quick and easy access. To add favorite channels:
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Favorite Channels.
3
Highlight the channel you want to add to the favorite channel list, then press SELECT. The fav designation is displayed next to the channel.
4
Press EXIT when you are finished.
To scan your favorite channels, press FAV on the remote control. If a channel is defined as a favorite, FAV appears in the channel information display when you tune to it.
15
FAVORITE CHA NNELS
Removing Favorite Channels To remove a favorite channel:
1
Highlight the channel you want to remove from the favorite channel list, then press SELECT. The fav designation next to the channel disappears. Press 0 (zero) to remove all favorite channels.
2
Press EXIT when you are finished.
16
PASSWORDS The parental control and the Pay-Per-View features enable you to control channel access using a password. You can create a different password for each.
Adding a Parental Control Password To add a four-digit Parental Control password (for example, 1224):
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Parental Control.
3
Select Control Viewing By Channel, Rating, or Time.
4
Using the numeric keys on the remote control, enter your password on the ENTER PARENTAL CONTROL PASSWORD screen and then press SELECT.
5
Re-enter the password to confirm it.
6
On the ACTIVATE PARENTAL CONTROL screen, press SELECT.
If you forget your password, call your cable service provider for assistance.
17
PASSWORDS
Adding a Pay-Per-View Password To add a four-digit Pay-Per-View purchase password (for example, 1228):
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Spending Limit.
3
Use the numeric keys on your remote control to enter the password you have chosen and then press SELECT. The SET SPENDING LIMIT screen is displayed.
4
Use the numeric keys on your remote control to enter the spending limit. If you set the limit at $00.00, all purchases require the password. If you set a limit greater then zero, the password is required only if the purchase exceeds the limit.
5
Press SELECT.
NOTE After you set the password, if you enter it incorrectly, you are prompted to try again. If you enter it incorrectly three times in a row, you must wait 15 minutes before trying again.
If you forget your password, call your cable company for assistance.
18
PASSWORDS
Changing or Deleting Passwords You can change your parental control and purchase passwords at any time. To change a password:
1
On the MAIN MENU, select Control Program Viewing.
2
Select Change Password.
3
Select the password that you want to change.
4
Enter your new password.
5
Follow the on-screen instructions to enter the new password or delete your old password by pressing the SELECT key twice.
6
Press EXIT when you are finished.
19
PARENTAL CON TROL
NOTE Setting parental control by channel number is the most secure method. Parental control by rating or time depends on information sent periodically by your cable service provider, usually about every half-hour. This information is erased by a power failure and parental control is lost until your cable service provider resends the necessary information after power is restored.
If you want to control your children’s television viewing, you can use the parental control feature after creating your 4-digit password. You can prevent the CFT2200 from tuning to programming based on channel number, rating, or time of day. When anyone tries to tune a controlled program, a password prompt is displayed. After you enter the password, all programming is accessible without the password. To establish parental control:
1
Create a four-digit password (See page 17).
2
Select the channels, ratings, or time periods that you want to control. See instructions for setting and re-activating parental control on pages 21-24.
20
PARENTAL CON TROL
Setting Control by Channel To set parental control by channel:
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Parental Control.
3
Select Control Viewing By Channel.
4
Use the cursor keys to highlight the channel.
5
Press SELECT. A lock symbol appears next to the channel.
6
To remove control, highlight the channel and then press SELECT. Press 0 (zero) to clear all channels.
7
If you want additional control by other methods, press LAST to display the SET PARENTAL CONTROL screen. Press EXIT when you are finished.
21
PARENTAL CON TROL
Setting Control by Rating Choosing control by rating allows unrestricted viewing of programs below the rating you selected. For example, if you choose R, programs rated PG-13, PG, or G can be viewed without the password; programs rated R, NC-17, or NR require the password. To set parental control by rating:
1 2 3
On the MAIN MENU, select Control Program Viewing.
4 5
Use the cursor keys to highlight the rating.
Select Set Parental Control. On the SET PARENTAL CONTROL screen, select Control Viewing By Rating.
Press SELECT. A lock symbol appears next to the rating and all higher ratings.
6
To remove control, highlight the rating and then press SELECT. Press 0 (zero) to clear all ratings.
7
If you want additional control by other methods, press LAST to display the SET PARENTAL CONTROL screen. Press EXIT when you are finished. 22
PARENTAL CON TROL
Setting Control by Time To set parental control by time:
1
On the MAIN MENU, select Control Program Viewing.
2
Select Set Parental Control.
3
On the SET PARENTAL CONTROL screen, select Control Viewing By Time.
4
Set the timer to ENABLE.
5
Set the control start and stop times.
6
Press SELECT.
7
To remove control by time, set the timer to DISABLE.
8
If you want additional control by other methods, press LAST to display the SET PARENTAL CONTROL screen. Press EXIT when you are finished.
23
PARENTAL CON TROL
Activating Parental Control You can view controlled programs by entering your password when prompted. When you do this, all programming is accessible without the password until you re-establish parental control. To activate parental control:
1
On the MAIN MENU select Control Program Viewing.
2
Select Activate Parental Control.
3
Press EXIT.
24
PAY-PER-VIEW If your cable service provider supports Pay-Per-View purchases through the CFT2200, you can purchase programs from the Program Guide. Special screens display information about the program and help you complete the purchase. To purchase a program:
1
Press SELECT to begin the purchase process.
2
Enter your parental control and purchase passwords. Before the purchase is made, you are given the opportunity to confirm or cancel it.
If you selected a current program, the CFT2200 tunes to it. If the program is on at some future time, the CFT2200 sets a timer to tune to it.
25
PURCHASE CON TROL
NOTE If you enter your password incorrectly, you are prompted to try again. If you enter it incorrectly three times in a row, you must wait 15 minutes before trying again.
Purchase control enables you to control Pay-Per-View purchases by creating a password and spending limit. Enable purchase control by establishing a purchase password and spending limit. The purchase password is not the same as the parental control password, although you can define them by using the same four digits. Choose a four-digit purchase password that is easy for you to remember. If you forget your password, call your cable service provider for assistance. See page 18 to create a purchase password and spending limit.
26
PROG RAM RE CORDING The program guide and record timer are used to record programs. NOTE While a recording is in progress, the CFT2200 front panel displays rEC, and control from front panel buttons and remote control are locked out. To exit the record mode and restore control, press EXIT and then REC on the remote control.
To record a program using the record timer, see page 31. To record a program using the program guide:
1
Put a tape in your VCR.
2
On the MAIN MENU, select Program Guide or press GUIDE on the remote control.
3
Follow the directions on the bottom of the screen to highlight the program that you want to record.
4
Press REC on the remote control.
5
Select One Time, Daily, Weekly, Weekdays, or Weekends on the RECORD A PROGRAM screen.
6
Press SELECT. You will have a chance to review your settings before confirming them.
27
PROG RAM RE CORDING
7
Program your VCR to turn on at the same time and tune to the same channel that you set on the RECORD A PROGRAM screen. The CFT2200 and the VCR must be programmed separately for each scheduled recording.
If the program you select is under parental control, you are prompted to enter your parental control password.
If you select a Pay-Per-View program, you are prompted to complete the purchase process.
If you set a timer that conflicts with one you set earlier, you are prompted to select one. Follow the on-screen instructions.
28
TIMERS
Setting the Program Timer The TUNE A PROGRAM screen is displayed when you try to tune a program playing in the future. To set the timer:
1
Select One-Time, Daily, Weekly, Weekdays, or Weekends.
2
Press SELECT and then EXIT. The area around the program in the program guide turns dark blue to indicate that a timer is set. The CFT2200 automatically tunes to the program at its start time.
29
TIMERS
Adding a Force Tune Timer A Force Tune Timer is used to tune a program at the desired time. To add a Force Tune Timer:
1
On the MAIN MENU, select Control Program Timers.
2
Select Add Force Tune Timer.
3
Follow the instructions on the bottom of the screen to make your selections and then press SELECT. If you set a timer that conflicts with one you set earlier, you are prompted to select one.
4
Confirm your selection and then press SELECT on your remote control.
To Move Press:
30
TIMERS
Adding a Record Timer A Record Timer is used to record a program at a desired time. To add a Record Timer:
To Move Press:
1
On the MAIN MENU, select Control Program Timers.
2
Select Add Record Timer.
3
Follow the instructions on the bottom of the screen to make your selections and then press SELECT. If you set a timer that conflicts with one you set earlier, you are prompted to select which one to keep.
4
Confirm your selection and then press SELECT on your remote control.
31
TIMERS
Edit, Review, or Delete a Timer To edit, review, or delete timers use the EDIT PROGRAM TIMERS screen:
1
On the MAIN MENU, select Control Program Timers.
2
Select Edit Program Timers.
3
Select a timer to edit, review, or delete.
4
Follow the instructions on the bottom of the screen to make your selections and then press SELECT.
5
Confirm your selection and then press SELECT on your remote control.
32
TIMERS
Setting the Sleep Timer You can set the CFT2200 to turn itself and your TV off after a certain period of time. Your TV must be plugged into the ac outlet in the rear of the CFT2200 and the outlet must be set to switch on and off with the CFT2200. See page 37 to set the ac outlet. To set the sleep timer:
1
On the MAIN MENU, select Control Your Terminal.
2
Select Set Sleep Timer.
3
Set the time.
4
Press SELECT and then press EXIT.
33
TIMERS
Setting the Alarm Timer You can set alarm timers to turn the CFT2200 and your TV on and off at certain times. Your TV must be plugged into the ac outlet on the rear of the CFT2200 and the outlet must be set to switch on and off with the CFT2200. See page 37 to set the ac outlet. To set the alarm timers:
1
On the MAIN MENU, select Control Your Terminal.
2
Select Set Alarm Timers.
3
Set Daily Turn On and Daily Turn Off to Enabled.
4
Set the on and off times. Momentarily pressing the left and right cursor keys changes the time by one minute. Press and hold the cursor keys to change the time in 15-minute increments.
5
Press SELECT and then press EXIT.
34
MESSAGES Occasionally, your cable service provider might send you messages about new service offerings, special promotions, or other information. The MESSAGES indicator is displayed on the CFT2200 front panel until you read the messages displayed. To read the messages:
1
On the MAIN MENU, select Messages.
2
Select a message from the list.
3
After reading the message, you have the option to save it. While you can delete most of the messages, some can only be deleted by your service provider.
4
Press EXIT when you are finished.
35
TIME DISPLAY The front panel of the CFT2200 normally displays the selected channel number but you can display the time. When you change channels, the new channel is momentarily displayed. When you turn the terminal off, it continues to display the time. To display the time: 0 ( 6 6 $ * ( 6
&+$11(/
1
On the MAIN MENU, select Control Your Terminal.
2
Select Set Up Your System.
3
Select Display Time On Your Terminal.
4
Highlight Enable and then press SELECT.
5
Press EXIT.
36
AC POWER OUTLE T
NOTE Some TV sets require the power to always remain on. Check the user handbook for your TV.
You can plug your TV into the ac connector on the rear of the CFT2200. This enables you to turn your TV on and off with the CFT2200. The default setting for the outlet is switched (that is, it turns on and off with the CFT2200). To set the ac power outlet to unswitched:
1
On the MAIN MENU, select Control Your Terminal.
2
Select Set Up Your System.
3
Select Set AC Power Outlet.
4
Highlight the unswitched option.
5
Press SELECT and then press EXIT.
37
BASIC CONNECTIONS You may want to add a VCR or your stereo system. To add equipment, you need the correct cables:
For most connections, use 75-ohm coaxial cable equipped with F-type connectors.
To use the audio or video outputs from the CFT2200, use cables equipped with RCA-type connectors.
The following diagram illustrates the basic connection to view cable programming. With an optional VCR, you can record programming. You can record and listen to stereo programming if you have a stereo TV or stereo VCR.
38
BASIC CONNECTIONS
Basic Connections F rom cab le o utlet
6:,7&+(' 9 +]$ :0$;
In TV
VCR optional ,1
&$%/( , 1
C A B LE IN
L
R A UD IO
V IDEO
$8', 2
9, '(2
287
&$%/( 287 $8', 2
9, '(2
O ut
39
BASIC CONNECTIONS
NOTE
With this hookup, you can listen in stereo to digitally encoded audio programming (Music Choice and Home Theater) if offered by your cable service provider, through your stereo TV.
With Audio and Video Baseband Connections The following diagram illustrates how to hookup to a TV having optional audio and video baseband connections. F rom cab le o utlet
6:,7&+(' 9 +]$ :0$;
L V id eo TV
C A B LE IN
R L
R
V IDEO
A UD IO
40
BASIC CONNECTIONS
With Picture-in-Picture TV If your TV offers this feature, the following diagram illustrates how to enable Picture-in-Picture. You can only tune non-scrambled channels on the B input. F rom cab le o utlet
Sp litter
6:,7&+(' 9 +]$ :0$;
Picture-in-Pitcure TV
In A
In C A B LE IN
41
L
R A UD IO
V IDEO
B
BASIC CONNECTIONS
With Your Stereo You can listen to monaural and stereo audio through your stereo TV as usual, and turn on your stereo to listen to digitally encoded audio programming (Music Choice and Home Theater) if provided by your cable service provider. F rom cab le o utlet
6:,7&+(' 9 +]$ :0$;
L
R VCR optional
STER EO $8', 2 , 1
/()7
5, *+7
$8', 2 287
/()7
5, *+7
TV
,1
&$%/( , 1
$8', 2
9, '(2
C A B LE IN
287
&$%/( 287 $8', 2
9, '(2
42
L
R A UD IO
V IDEO
MUSIC CHOICE If you have the Music Choice option, you can enjoy commercial-free, CD-quality music. The on-screen display for Music Choice is similar to the TV viewing displays. You can tune to Music Choice in two ways:
Using the remote control, press MUSIC. If you are watching television, the CFT2200 switches to Music Choice. If the CFT2200 is off, it switches on and tunes to Music Choice. The CFT2200 displays the music channel number with the letter "A" before it (for example, A14). When you change volume, the volume level is momentarily displayed.
On the MAIN MENU, select Listen to Music.
Listen To Music
43
MUSIC CHOICE When you tune to Music Choice, the Song ID screen displays information about the current song. The following remote control keys are especially important:
The right cursor key lists information about previously played songs.
EXIT returns
MENU
Press MUSIC on the remote control to tune to Music Choice, and change channels with the CHAN keys.
Press MUSIC again or select Watch Television from the MUSIC MAIN MENU to return to watching television.
1
to the Song ID screen for the current song.
returns to the MUSIC MAIN MENU.
Your TV does not need to be on to listen to music. If you want to listen through your stereo system, you can turn off your TV (See details on page 42 to connect your stereo.)
44
MUSIC CHOICE
Adding or Removing Favorite Channels The CFT2200 lets you scan through your list of Music Choice favorite channels. To add or remove channels in your list:
SELECT
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Set Favorite Channels.
3
To add a channel, highlight it on the SET FAVORITE CHANNELS screen and press SELECT. A check mark appears next to the channel. o r T o remove a channel, highlight it on the Set Favorite Channels screen and press SELECT. The check mark disappears. To remove all channels, press the zero key.
4
Press EXIT when you are finished.
You can now scan through your favorite channels by pressing FAV on the remote.
45
MUSIC CHOICE
Selecting by Channel To make your selection from the full list of available channels:
SELECT
1
On the MUSIC MAIN MENU, select Find a Channel.
2
Highlight your choice and press SELECT.
3
If you are satisfied with your choice, press EXIT. If not, make another.
The bottom of the FIND A CHANNEL screen shows information for the current song.
46
MUSIC CHOICE
Selecting by Theme You can easily tune the type of music you enjoy most by choosing channel listings by theme. To select channel listings by theme:
1
On the MUSIC MAIN MENU, select Listen to Channels By Theme.
2
Highlight your choice and press SELECT.
3
Highlight your choice of channel on the theme list and press SELECT.
4
If you are satisfied with your choice, press EXIT. If not, make another.
47
MUSIC CHOICE
Adding and Removing Parental Control As with television programming, you can restrict access to music channels by using a parental control password. This is the same password used for controlling TV viewing.
R
To add or remove restriction from selected music channels:
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Set Parental Control.
3
Enter your password.
4
To add restriction, highlight the channel and press SELECT. A check mark appears next to the channel.
R
SELECT
o r T o remove restriction, highlight the channel and press SELECT. The check mark disappears.
5
Press EXIT.
48
MUSIC CHOICE
Using Parental Control You can listen to parentally controlled channels by entering your password. When you do this, all music and TV programming is accessible without the password. To re-establish control, turn the CFT2200 off and on, or:
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Control Audio Configuration.
3
Highlight Lock Terminal and then press SELECT. The notation (UNLOCKED) changes to (LOCKED).
4
Press EXIT.
49
MUSIC CHOICE
Setting the Volume Equalizer The CFT2200 features a volume equalizer that reduces the dynamic range of the music to prevent wide changes in volume from song to song. If your cable operator supports this feature, you can turn the volume equalizer on. To switch the equalizer on or off:
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Control Audio Configuration. The CONTROL AUDIO CONFIGURATION screen indicates the current setting.
3
To change the setting, highlight Change Volume Equalizer and then press SELECT.
4
Press EXIT.
50
MUSIC CHOICE
Setting Best Stereo Volume To set the volume for best stereo listening:
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Control Audio Configuration.
3
Select Set Best Stereo Volume and then press SELECT. The notation SET indicates that volume is set for best stereo.
4
Press EXIT.
51
MUSIC CHOICE
Blanking the Screen While you are tuned to Music Choice, the on-screen display screens remain on. If you are concerned about the screens damaging the TV picture tube, you can set the CFT2200 to blank the screen.
1
On the MUSIC MAIN MENU, select Control Channel Listening.
2
Select Control Audio Configuration.
3
Select Change Screen Blanking and then press SELECT to switch between on and off. The screen does not blank immediately. It will blank after a few minutes if you do not make any menu selections.
4
Press EXIT.
To restore Music Choice screens, press any button on the CFT2200 front panel or any key on the remote control.
52
AUDIO BYPASS SWITCH
NOTE Use of the audio bypass switch assumes that you always listen to audio through your home stereo and that a stereo signal is connected to the bypass switch AUDIO IN jack. If you listen through your TV speakers, digitally encoded audio programming will be heard in monaural format. If you listen through your home stereo with no signal connected to the AUDIO IN jack, all non-digitally encoded audio programming will not have an audio output.
When equipped with the optional audio bypass switch, the CFT2200 can automatically switch between its internal digital audio decoder and an external audio source to drive the left and right audio outputs. You can connect the left and right audio outputs of a stereo TV or VCR to the CFT2200 to always hear the best-quality sound through your stereo. To use the switch:
Your CFT2200 must include the optional audio bypass switch.
Your TV system setup must include a stereo for audio output.
Your TV system setup must include a stereo TV or VCR with left and right outputs.
53
AUDIO BYPASS SWITCH To set the switch:
1
From the MAIN MENU, select Listen To Music.
2
On the Music MAIN MENU select Control Channel Listening.
3
Select Control Audio Configuration.
4
Highlight Audio Bypass Control and then press SELECT to switch between on and off.
5
Press EXIT to return to the Song ID screen, or press MENU to return to the MAIN MENU.
When the audio bypass switch is on and the CFT2200 is off, whatever signal is connected to the AUDIO IN jack is passed through to the left and right audio outputs of the CFT2200.
54
AUDIO BYPASS SWITCH This hookup uses the optional audio bypass switch to loop decoded stereo programming back into the CFT2200 for output on the left and right audio jacks. NOTE F rom cab le o utlet
With this hookup, you can listen to all audio programming through your home stereo and always hear the best-quality sound. ', *, 7$ / 287
$8', 2 , 1
6:,7&+(' 9 +]$ :0$;
L A u dio in
STER EO
R
o utp ut VCR optional
in
$8', 2 , 1
/()7
5, *+7
$8', 2 287
/()7
5, *+7
O ut
,1
&$%/( , 1
$8', 2
9, '(2
287
&$%/( 287 $8', 2
R
L TV
9, '(2
55
C A B LE IN
L
R A UD IO
V IDEO
THE VCR CON TROLLER Some cable service providers offer the option of infrared VCR control. If your CFT2200 is equipped with the VCR controller option, an IR transmitter is plugged into the rear of the CFT2200 and mounted to the front of your VCR. The CFT2200 can then turn the VCR on to record a selected program and turn it off when the program is over.
0 ( 6 6 $ * ( 6
0 (1 8
6(/(&7
(17(5
92/80 (
&+$11(/
IR B laster placed near VCR rem ote-control sensor
56
THE VCR CON TROLLER If you have the VCR controller option, your cable service provider will usually set it up during the installation of the CFT2200. If you need to set up the VCR controller:
1
On the MAIN MENU select Control Your Terminal.
2
Select Set Up Your System.
3
Select Set Up VCR Controller.
4
Follow the on-screen directions. You will be prompted for the manufacturer of your VCR and to check for the proper VCR controller response.
5
Press EXIT when you are finished.
57
General Instrument Corporation 463701-001-99 7/99
Related Documents
0 ( 6 6 $ * ( 6
June 2020 63
70+6'& 0#6+105
May 2020 16
6-6
May 2020 60
6
November 2019 8
6
October 2019 16